summaryrefslogtreecommitdiff
path: root/arch/cris/arch-v32/lib/nand_init.S
blob: e019816facd700be144752fd3d9ea928395f4aea (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
##=============================================================================
##
##      nand_init.S
##
##      The bootrom copies data from the NAND flash to the internal RAM but
##      due to a bug/feature we can only trust the 256 first bytes. So this
##      code copies more data from NAND flash to internal RAM. Obvioulsy this
##      code must fit in the first 256 bytes so alter with care.
##
##	Some notes about the bug/feature for future reference:
##        The bootrom copies the first 127 KB from NAND flash to internal
##        memory. The problem is that it does a bytewise copy. NAND flashes
##        does autoincrement on the address so for a 16-bite device each
##        read/write increases the address by two. So the copy loop in the
##        bootrom will discard every second byte. This is solved by inserting
##        zeroes in every second byte in the first erase block.
##
##        The bootrom also incorrectly assumes that it can read the flash
##        linear with only one read command but the flash will actually
##        switch between normal area and spare area if you do that so we
##        can't trust more than the first 256 bytes.
##
##=============================================================================

#include <asm/arch/hwregs/asm/reg_map_asm.h>
#include <asm/arch/hwregs/asm/gio_defs_asm.h>
#include <asm/arch/hwregs/asm/pinmux_defs_asm.h>
#include <asm/arch/hwregs/asm/bif_core_defs_asm.h>
#include <asm/arch/hwregs/asm/config_defs_asm.h>

;; There are 8-bit NAND flashes and 16-bit NAND flashes.
;; We need to treat them slightly different.
#if CONFIG_ETRAX_FLASH_BUSWIDTH==2
#define PAGE_SIZE 256
#else
#error 2
#define PAGE_SIZE 512
#endif
#define ERASE_BLOCK 16384

;; GPIO pins connected to NAND flash
#define CE 4
#define CLE 5
#define ALE 6
#define BY 7

;; Address space for NAND flash
#define NAND_RD_ADDR 0x90000000
#define NAND_WR_ADDR 0x94000000

#define READ_CMD 0x00

;; Readability macros
#define CSP_MASK \
	REG_MASK(bif_core, rw_grp3_cfg, gated_csp0) | \
	REG_MASK(bif_core, rw_grp3_cfg, gated_csp1)
#define CSP_VAL \
	REG_STATE(bif_core, rw_grp3_cfg, gated_csp0, rd) | \
	REG_STATE(bif_core, rw_grp3_cfg, gated_csp1, wr)

;;----------------------------------------------------------------------------
;; Macros to set/clear GPIO bits

.macro SET x
	or.b   (1<<\x),$r9
	move.d $r9, [$r2]
.endm

.macro CLR x
	and.b  ~(1<<\x),$r9
	move.d $r9, [$r2]
.endm

;;----------------------------------------------------------------------------

nand_boot:
	;; Check if nand boot was selected
	move.d REG_ADDR(config, regi_config, r_bootsel), $r0
	move.d [$r0], $r0
	and.d  REG_MASK(config, r_bootsel, boot_mode), $r0
	cmp.d  REG_STATE(config, r_bootsel, boot_mode, nand), $r0
	bne normal_boot ; No NAND boot
	nop

copy_nand_to_ram:
	;; copy_nand_to_ram
	;; Arguments
	;;   r10 - destination
	;;   r11 - source offset
	;;   r12 - size
	;;   r13 - Address to jump to after completion
	;; Note : r10-r12 are clobbered on return
	;; Registers used:
	;;   r0 - NAND_RD_ADDR
	;;   r1 - NAND_WR_ADDR
	;;   r2 - reg_gio_rw_pa_dout
	;;   r3 - reg_gio_r_pa_din
	;;   r4 - tmp
	;;   r5 - byte counter within a page
	;;   r6 - reg_pinmux_rw_pa
	;;   r7 - reg_gio_rw_pa_oe
	;;   r8 - reg_bif_core_rw_grp3_cfg
	;;   r9 - reg_gio_rw_pa_dout shadow
	move.d 0x90000000, $r0
	move.d 0x94000000, $r1
	move.d REG_ADDR(gio, regi_gio, rw_pa_dout), $r2
	move.d REG_ADDR(gio, regi_gio, r_pa_din), $r3
	move.d REG_ADDR(pinmux, regi_pinmux, rw_pa), $r6
	move.d REG_ADDR(gio, regi_gio, rw_pa_oe), $r7
	move.d REG_ADDR(bif_core, regi_bif_core, rw_grp3_cfg), $r8

#if CONFIG_ETRAX_FLASH_BUSWIDTH==2
	lsrq	1, $r11
#endif
	;; Set up GPIO
	move.d [$r2], $r9
	move.d [$r7], $r4
	or.b (1<<ALE) | (1 << CLE) | (1<<CE), $r4
	move.d $r4, [$r7]

	;; Set up bif
	move.d [$r8], $r4
	and.d CSP_MASK, $r4
	or.d CSP_VAL, $r4
	move.d $r4, [$r8]

1:	;; Copy one page
	CLR CE
	SET CLE
	moveq	READ_CMD, $r4
	move.b	$r4, [$r1]
	moveq	20, $r4
2:	bne	2b
	subq	1, $r4
	CLR CLE
	SET ALE
	clear.w [$r1] 		; Column address = 0
	move.d	$r11, $r4
	lsrq	8, $r4
	move.b	$r4, [$r1]	; Row address
	lsrq	8, $r4
	move.b	$r4, [$r1]	; Row adddress
	moveq	20, $r4
2:	bne	2b
	subq	1, $r4
	CLR ALE
2:	move.d	[$r3], $r4
	and.d	1 << BY, $r4
	beq 2b
	movu.w  PAGE_SIZE, $r5
2:	; Copy one byte/word
#if CONFIG_ETRAX_FLASH_BUSWIDTH==2
	move.w  [$r0], $r4
#else
	move.b  [$r0], $r4
#endif
	subq	1, $r5
	bne	2b
#if CONFIG_ETRAX_FLASH_BUSWIDTH==2
	move.w  $r4, [$r10+]
	subu.w	PAGE_SIZE*2, $r12
#else
	move.b  $r4, [$r10+]
	subu.w	PAGE_SIZE, $r12
#endif
	bpl	1b
	addu.w	PAGE_SIZE, $r11

	;; End of copy
	jump	$r13
	nop

	;; This will warn if the code above is too large. If you consider
	;; to remove this you don't understand the bug/feature.
	.org 256
	.org ERASE_BLOCK

normal_boot: