summaryrefslogtreecommitdiff
path: root/drivers/media/video/cafe_ccic-regs.h
blob: 8e2a87cdc791b1fa3018d9ee2fd0fef9f7283941 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
/*
 * Register definitions for the m88alp01 camera interface.  Offsets in bytes
 * as given in the spec.
 *
 * Copyright 2006 One Laptop Per Child Association, Inc.
 *
 * Written by Jonathan Corbet, corbet@lwn.net.
 *
 * This file may be distributed under the terms of the GNU General
 * Public License, version 2.
 */
#define REG_Y0BAR	0x00
#define REG_Y1BAR	0x04
#define REG_Y2BAR	0x08
/* ... */

#define REG_IMGPITCH	0x24	/* Image pitch register */
#define   IMGP_YP_SHFT	  2		/* Y pitch params */
#define   IMGP_YP_MASK	  0x00003ffc	/* Y pitch field */
#define	  IMGP_UVP_SHFT	  18		/* UV pitch (planar) */
#define   IMGP_UVP_MASK   0x3ffc0000
#define REG_IRQSTATRAW	0x28	/* RAW IRQ Status */
#define   IRQ_EOF0	  0x00000001	/* End of frame 0 */
#define   IRQ_EOF1	  0x00000002	/* End of frame 1 */
#define   IRQ_EOF2	  0x00000004	/* End of frame 2 */
#define   IRQ_SOF0	  0x00000008	/* Start of frame 0 */
#define   IRQ_SOF1	  0x00000010	/* Start of frame 1 */
#define   IRQ_SOF2	  0x00000020	/* Start of frame 2 */
#define   IRQ_OVERFLOW	  0x00000040	/* FIFO overflow */
#define   IRQ_TWSIW	  0x00010000	/* TWSI (smbus) write */
#define   IRQ_TWSIR	  0x00020000	/* TWSI read */
#define   IRQ_TWSIE	  0x00040000	/* TWSI error */
#define   TWSIIRQS (IRQ_TWSIW|IRQ_TWSIR|IRQ_TWSIE)
#define   FRAMEIRQS (IRQ_EOF0|IRQ_EOF1|IRQ_EOF2|IRQ_SOF0|IRQ_SOF1|IRQ_SOF2)
#define   ALLIRQS (TWSIIRQS|FRAMEIRQS|IRQ_OVERFLOW)
#define REG_IRQMASK	0x2c	/* IRQ mask - same bits as IRQSTAT */
#define REG_IRQSTAT	0x30	/* IRQ status / clear */

#define REG_IMGSIZE	0x34	/* Image size */
#define  IMGSZ_V_MASK	  0x1fff0000
#define  IMGSZ_V_SHIFT	  16
#define	 IMGSZ_H_MASK	  0x00003fff
#define REG_IMGOFFSET	0x38	/* IMage offset */

#define REG_CTRL0	0x3c	/* Control 0 */
#define   C0_ENABLE	  0x00000001	/* Makes the whole thing go */

/* Mask for all the format bits */
#define   C0_DF_MASK	  0x00fffffc    /* Bits 2-23 */

/* RGB ordering */
#define   C0_RGB4_RGBX	  0x00000000
#define	  C0_RGB4_XRGB	  0x00000004
#define	  C0_RGB4_BGRX	  0x00000008
#define   C0_RGB4_XBGR	  0x0000000c
#define   C0_RGB5_RGGB	  0x00000000
#define	  C0_RGB5_GRBG	  0x00000004
#define	  C0_RGB5_GBRG	  0x00000008
#define   C0_RGB5_BGGR	  0x0000000c

/* Spec has two fields for DIN and DOUT, but they must match, so
   combine them here. */
#define   C0_DF_YUV	  0x00000000    /* Data is YUV	    */
#define   C0_DF_RGB	  0x000000a0	/* ... RGB		    */
#define   C0_DF_BAYER     0x00000140	/* ... Bayer                */
/* 8-8-8 must be missing from the below - ask */
#define   C0_RGBF_565	  0x00000000
#define   C0_RGBF_444	  0x00000800
#define   C0_RGB_BGR	  0x00001000	/* Blue comes first */
#define   C0_YUV_PLANAR	  0x00000000	/* YUV 422 planar format */
#define   C0_YUV_PACKED	  0x00008000	/* YUV 422 packed	*/
#define   C0_YUV_420PL	  0x0000a000	/* YUV 420 planar	*/
/* Think that 420 packed must be 111 - ask */
#define	  C0_YUVE_YUYV	  0x00000000	/* Y1CbY0Cr 		*/
#define	  C0_YUVE_YVYU	  0x00010000	/* Y1CrY0Cb 		*/
#define	  C0_YUVE_VYUY	  0x00020000	/* CrY1CbY0 		*/
#define	  C0_YUVE_UYVY	  0x00030000	/* CbY1CrY0 		*/
#define   C0_YUVE_XYUV	  0x00000000    /* 420: .YUV		*/
#define	  C0_YUVE_XYVU	  0x00010000	/* 420: .YVU 		*/
#define	  C0_YUVE_XUVY	  0x00020000	/* 420: .UVY 		*/
#define	  C0_YUVE_XVUY	  0x00030000	/* 420: .VUY 		*/
/* Bayer bits 18,19 if needed */
#define   C0_HPOL_LOW	  0x01000000	/* HSYNC polarity active low */
#define   C0_VPOL_LOW	  0x02000000	/* VSYNC polarity active low */
#define   C0_VCLK_LOW	  0x04000000	/* VCLK on falling edge */
#define   C0_DOWNSCALE	  0x08000000	/* Enable downscaler */
#define	  C0_SIFM_MASK	  0xc0000000	/* SIF mode bits */
#define   C0_SIF_HVSYNC	  0x00000000	/* Use H/VSYNC */
#define   CO_SOF_NOSYNC	  0x40000000	/* Use inband active signaling */


#define REG_CTRL1	0x40	/* Control 1 */
#define   C1_444ALPHA	  0x00f00000	/* Alpha field in RGB444 */
#define   C1_ALPHA_SHFT	  20
#define   C1_DMAB32	  0x00000000	/* 32-byte DMA burst */
#define   C1_DMAB16	  0x02000000	/* 16-byte DMA burst */
#define	  C1_DMAB64	  0x04000000	/* 64-byte DMA burst */
#define	  C1_DMAB_MASK	  0x06000000
#define   C1_TWOBUFS	  0x08000000	/* Use only two DMA buffers */
#define   C1_PWRDWN	  0x10000000	/* Power down */

#define REG_CLKCTRL	0x88	/* Clock control */
#define   CLK_DIV_MASK	  0x0000ffff	/* Upper bits RW "reserved" */

#define REG_GPR		0xb4	/* General purpose register.  This
				   controls inputs to the power and reset
				   pins on the OV7670 used with OLPC;
				   other deployments could differ.  */
#define   GPR_C1EN	  0x00000020	/* Pad 1 (power down) enable */
#define   GPR_C0EN	  0x00000010	/* Pad 0 (reset) enable */
#define	  GPR_C1	  0x00000002	/* Control 1 value */
/*
 * Control 0 is wired to reset on OLPC machines.  For ov7x sensors,
 * it is active low, for 0v6x, instead, it's active high.  What
 * fun.
 */
#define   GPR_C0	  0x00000001	/* Control 0 value */

#define REG_TWSIC0	0xb8	/* TWSI (smbus) control 0 */
#define   TWSIC0_EN       0x00000001	/* TWSI enable */
#define   TWSIC0_MODE	  0x00000002	/* 1 = 16-bit, 0 = 8-bit */
#define   TWSIC0_SID	  0x000003fc	/* Slave ID */
#define   TWSIC0_SID_SHIFT 2
#define   TWSIC0_CLKDIV   0x0007fc00	/* Clock divider */
#define   TWSIC0_MASKACK  0x00400000	/* Mask ack from sensor */
#define   TWSIC0_OVMAGIC  0x00800000	/* Make it work on OV sensors */

#define REG_TWSIC1	0xbc	/* TWSI control 1 */
#define   TWSIC1_DATA	  0x0000ffff	/* Data to/from camchip */
#define   TWSIC1_ADDR	  0x00ff0000	/* Address (register) */
#define   TWSIC1_ADDR_SHIFT 16
#define   TWSIC1_READ	  0x01000000	/* Set for read op */
#define   TWSIC1_WSTAT	  0x02000000	/* Write status */
#define   TWSIC1_RVALID	  0x04000000	/* Read data valid */
#define   TWSIC1_ERROR	  0x08000000	/* Something screwed up */


#define REG_UBAR	0xc4	/* Upper base address register */

/*
 * Here's the weird global control registers which are said to live
 * way up here.
 */
#define REG_GL_CSR     0x3004  /* Control/status register */
#define   GCSR_SRS	 0x00000001	/* SW Reset set */
#define   GCSR_SRC  	 0x00000002	/* SW Reset clear */
#define	  GCSR_MRS	 0x00000004	/* Master reset set */
#define	  GCSR_MRC	 0x00000008	/* HW Reset clear */
#define   GCSR_CCIC_EN   0x00004000    /* CCIC Clock enable */
#define REG_GL_IMASK   0x300c  /* Interrupt mask register */
#define   GIMSK_CCIC_EN          0x00000004    /* CCIC Interrupt enable */

#define REG_GL_FCR	0x3038  /* GPIO functional control register */
#define	  GFCR_GPIO_ON	  0x08		/* Camera GPIO enabled */
#define REG_GL_GPIOR	0x315c	/* GPIO register */
#define   GGPIO_OUT  		0x80000	/* GPIO output */
#define   GGPIO_VAL  		0x00008	/* Output pin value */

#define REG_LEN                REG_GL_IMASK + 4


/*
 * Useful stuff that probably belongs somewhere global.
 */
#define VGA_WIDTH	640
#define VGA_HEIGHT	480