summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-06-30python3-docutils: fix build time rst2man dependencyMarcel Ziswiler
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2017-06-30tdx_version.conf: update to 2.7.3 resp. 2.7b3 for Q2 2017 releaseMarcel Ziswiler
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2017-06-09libusbgx: fix usb product id calculationStefan Agner
The Toradex product ID from the config block is decimal coded ASCII with leading zeros. In C and bash, leading zeros means octal number... This leads to wrong calculation of the USB product ID and to errors if the product ID contains the number 8 or 9 (since those are not valid under the octal numeric system). Fix both issues by explicitly force decimal system for the Toradex product ID. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2017-06-09gpio-export: do not export gpios used for ov5640 reset and power controlBhuvanchandra DV
Toradex CSI 5MP OV5640 camera module uses two GPIOs for power and reset control, exporting them here leads to failure of OV5640 driver. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
2017-06-09image_type_tezi: make small volumes staticStefan Agner
The volumes for kernel, device tree and Cortex-M4 firmware get updated with a single binary for which a static volume is better suited. This also allows the boot code to only load the amount of written bytes and therefore speeds up boot time. Static volumes have been used already with the update.sh script based update method. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2017-06-09image_type_tezi: pack raw nand images without bootfsStefan Agner
Raw NAND images flash the kernel and device tree directly into UBI volumes, hence there is no need to generate a bootfs tarball. Leave the kernel and device tree unpacked so we can copy it directly into the UBI volume. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2017-06-09layer.conf: include correct filename tdx_version.confStefan Agner
Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2017-06-09image_type_tezi: add raw nand device supportStefan Agner
Add support for raw NAND devices. Describe the layout of the MTD partitions and UBI volumes using JSON. Also split the storage description into a separate function, called depending on a machine specific variable for eMMC and raw NAND. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2017-06-09meta-toradex-bsp: add colibri imx7 to supported machinesStefan Agner
The default (empty) prepare/wrapup scripts will be used which is fine since there is no need for special scripting on Colibri iMX7 currently. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2017-06-09layer.conf: export the tdx version variablesMax Krummenacher
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2017-04-07apalis/colibri-imx6/t30/tk1: read ahead cache configurationColibri-iMX7_LXDE-Image_2.7b2-20170410Colibri-iMX6_LXDE-Image_2.7b2-20170410Colibri-VF_LXDE-Image_2.7b2-20170410Colibri-T30_LXDE-Image_2.7b2-20170410Colibri-T20_LXDE-Image_2.7b2-20170410Apalis-iMX6_LXDE-Image_2.7b2-20170410Apalis-TK1_LXDE-Image_2.7b2-20170410Apalis-T30_LXDE-Image_2.7b2-20170410Leonardo Graboski Veiga
Configure the read_ahead cache size to optimal value, for the mmcblk devices (eMMC and SD card). The cache values are module specific, tests were run on the pre-built image (BSP V2.7 Beta 1). The measurement of read speed for a range of cache sizes (16kB to 256MB) was made using hdparm -t. Signed-off-by: Leonardo Graboski Veiga <leogveiga@gmail.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2017-04-07image_type_tezi: use the new version variablesMax Krummenacher
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2017-04-07tdx_version.conf: add variables to construct the bsp versionMax Krummenacher
0123456789012345678901234567890123456789012345678901234567890123456789 These variables are used to mark the BSP version in U-Boot, the Linux kernel and the final image. Note that some can be overridden from the shell environment, e.g.: export BB_ENV_EXTRAWHITE="$BB_ENV_EXTRAWHITE TDX_VERNIGHTLY" export TDX_VERNIGHTLY="-nightly" Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2017-04-07meta-toradex-bsp: clean-up whitespace useMax Krummenacher
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2017-04-07fix-up mesa packageconfigMax Krummenacher
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2017-04-07recipes: remove unneeded RDEPENDSMax Krummenacher
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2017-04-07layer.conf: add layer dependenciesMax Krummenacher
While at it clean-up and unify with other Toradex layers. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2017-04-07libusbgx: add empty placeholder g1.schemaMax Krummenacher
Prevents a warning when not building for one of the machines which have a g1.schema | WARNING: ...libusbgx/libusbgx_git.bb: Unable to get checksum for libusbgx SRC_URI entry g1.schema: file could not be found Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2017-02-08image_type_tezi: do not create image.json if teziimg is not requestedStefan Agner
In case teziimg is not among the requested images (not part of IMAGE_FSTYPES) we don't need to create a Toradex Easy Installer image.json file. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
2017-02-08libusbg: remove bbappend since superseded by libusbgxStefan Agner
Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
2017-02-08libusbgx: add RNDIS configuration and systemd service for importStefan Agner
Update libusbgx to a version with OS Descriptor support for better interoperability with Windows operating systems. Add configuration using RNDIS with Toradex vendor id. Read serial number and product id from the device tree to configure the USB gadget device. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
2017-02-08libusbgx: Add recipe for libusbg successorStefan Agner
libusbgx (libusbg-neXt) is a fork of libusbg which is more actively maintained. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
2017-02-08image_type_tezi: rename image to teziimgStefan Agner
Avoid ambiguity with other uses of the string "tezi", e.g. when used as an image or distro name. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
2017-02-08tezi-metadata: use wrapup.sh script for Colibri iMX6 tooStefan Agner
The wrapup.sh script updates fuses/eMMC settings on-site. The same script can be used for Apalis iMX6 as well as for Colibri iMX6. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
2017-02-08fs-init: do not reload daemon configurationStefan Agner
In case the resizefs.sh script ends quite fast, the system might still be in boot sequence. Removing a systemd service can be problematic in that case: It seems that systemd looses the state of .device units, and some services depend on such units (namely serial consoles such as serial-getty@ttymxc0.service). The following sequence shows this problem: Jan 12 00:16:45 apalis-imx6 sh[399]: Removed /etc/systemd/system/multi-user.target.wants/resizefs.service. Jan 12 00:16:45 apalis-imx6 systemd[1]: Reloading. Jan 12 00:16:45 apalis-imx6 root[704]: resizing mmcblk0p2 finished, new size is 3755M ... Jan 19 00:04:08 apalis-imx6 systemd[1]: dev-ttymxc0.device: Job dev-ttymxc0.device/start timed out. Jan 19 00:04:08 apalis-imx6 systemd[1]: Timed out waiting for device dev-ttymxc0.device. Jan 19 00:04:08 apalis-imx6 systemd[1]: Dependency failed for Serial Getty on ttymxc0. (the time has been updated between this to events, but that does not influence the issue) Using --no-reload avoids the "Reloading." message above and seems to not cause such issues anymore. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
2017-02-08fs-init: remove duplicate resize scriptStefan Agner
The script used for all machines (e.g. T30) and the mx6 specific script are the very same scripts. Drop the mx6 specific script, with that the recipe will use the general scripts for all machines. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
2017-01-11apalis-imx6: do in-field updates at the endColibri_iMX7_LinuxImageV2.7Beta1_20170112Colibri_iMX6_LinuxImageV2.7Beta1_20170112Colibri_VF_LinuxImageV2.7Beta1_20170112Colibri_T30_LinuxImageV2.7Beta1_20170112Colibri_T20_LinuxImageV2.7Beta1_20170112Apalis_iMX6_LinuxImageV2.7Beta1_20170112Apalis_TK1_LinuxImageV2.7Beta1_20170112Apalis_T30_LinuxImageV2.7Beta1_20170112Stefan Agner
The boot partition configuration needs to be done _after_ writing to the boot partition (hence after flashing SPL and U-Boot). Move the whole migration script to the end by using the wrapup.sh script. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2017-01-11image_type_tezi: add custom image type for Toradex Easy InstallerStefan Agner
The Toradex Easy Installer is a Linux based installer for images. This commit adds a new image type which allows to build images flashable with this installer directly with OpenEmbedded. The installer needs a JSON based image description (image.json) which will be generated using a custom Python step. The IMAGE_CMD step then creates a bootfs tar.xz and creates a tar with the bootfs, rootfs, U-Boot and SPL, image.json and some more metadata files. This tarball can be extracted on a SD card, USB flah drive or HTTP server and consumed by the Toradex Easy Installer. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2017-01-11tezi-metadata: initial commit of Tezi specific image metadataStefan Agner
This adds metadata files required by Toradex Easy Installer. Most notable is the Linux specific migration script which is executed before flashing an image. The script makes sure that hardware specific upgrades such as fuses/eMMC reconfiguration get executed, as our U-Boot based scripts do when using "run update". Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2017-01-11Update README to depend on the morty versionMax Krummenacher
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2017-01-11systemd: remove patch now provided upstreamMax Krummenacher
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2016-09-29systemd: split bbappend to only change bsp releated mountColibri_iMX7_LinuxImageV2.6.1Beta1_20160929Colibri_iMX6_LinuxImageV2.6.1Beta1_20160929Colibri_VF_LinuxImageV2.6.1Beta1_20161001Colibri_T30_LinuxImageV2.6.1Beta1_20160929Colibri_T20_LinuxImageV2.6.1Beta1_20160929Apalis_iMX6_LinuxImageV2.6.1Beta1_20160929Apalis_TK1_LinuxImageV2.6.1Beta2_20161122Apalis_TK1_LinuxImageV2.6.1Beta1_20160929Apalis_T30_LinuxImageV2.6.1Beta1_20160929jethroMax Krummenacher
The BSP should automount for all users. The Demo Software Layers cares for RNDIS. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2016-09-29meta-openembedded layer bbappendsMax Krummenacher
Move the appends on recipe's which are not in an essential required layer into a target layer specific directory and add them only if said layer is active in build/conf/bblayers.conf. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Acked-by: Stefan Agner <stefan.agner@toradex.com>
2016-09-29update readme and copying.mitMax Krummenacher
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Acked-by: Stefan Agner <stefan.agner@toradex.com>
2016-09-29add layer.confMax Krummenacher
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Acked-by: Stefan Agner <stefan.agner@toradex.com>
2016-09-29apalis-tk1: integrate usb-rndismeta-toradex_splitMarcel Ziswiler
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
2016-09-29machine conf: remove setting of MACHINE_GUI_CLASSMax Krummenacher
This is only used for choosing a custom logo size. Not needed in our use case. meta-openembedded/meta-oe/recipes-kernel/linux/linux.inc Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2016-09-29u-boot: get rid of obsolete patchesMarcel Ziswiler
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
2016-09-29psplash-angstrom_git.bbappend: removed, *.bb no longer existsMax Krummenacher
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2016-03-14libvpx: add mx7 overrideMax Krummenacher
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2016-03-14libvpx bbappend: remove patchMax Krummenacher
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2016-03-14systemd patch: rebase after version upgradeMax Krummenacher
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2016-03-14linux-firmware: drop bbappend, changes are now in metaMax Krummenacher
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2016-03-14Apalis/Colibri iMX6: drop in favour of meta-fsl-arm-extraMax Krummenacher
machine/u-boot/kernel files have been added to meta-fsl-arm-extra. Use them from there now. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2015-12-15linux-firmware: backport rtl8192cx: Add latest available firmwareMax Krummenacher
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2015-12-15Update all U-Boot versions to latestMax Krummenacher
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2015-12-15linux-toradex-fsl: update to latest revisionMax Krummenacher
Update to latest revision which fixes Colibri iMX6D not powerering off but creating a stacktrace. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2015-12-15linux-toradex_4.1: convert recipe to bbappendMax Krummenacher
We have this recipe in meta-fsl-arm-extra. Convert it to a bbappend and only keep the changes to the bb files. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2015-12-15Apalis iMX6: U-Boot: change name for IT modulesMax Krummenacher
Change the name form u-boot-it.imx to u-boot.imx-it. This prepares for the upcomming move of the i.MX 6 based modules BSP to meta-fsl-arm-extra. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2015-12-15README: Add README with dependency and contribution informationStefan Agner
Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-04-19 15:54:37 +0000