summaryrefslogtreecommitdiff
path: root/release-notes
diff options
context:
space:
mode:
authorMarcel Ziswiler <marcel.ziswiler@toradex.com>2015-02-12 12:13:52 +0100
committerMarcel Ziswiler <marcel.ziswiler@toradex.com>2015-02-12 12:13:52 +0100
commitb18ffd625bd35b49d09a6541bd1decc9853c1f7f (patch)
treea7fe132a97524173e88214ce1db5760441dbf186 /release-notes
parentf52691ba7ba4a3af978946246eaee20d9c07abc7 (diff)
Update release notes
Diffstat (limited to 'release-notes')
-rw-r--r--release-notes/Apalis_T30_LinuxReleaseNotesV2.x.txt15
-rw-r--r--release-notes/Colibri_T20_LinuxReleaseNotesV2.x.txt31
-rw-r--r--release-notes/Colibri_T30_LinuxReleaseNotesV2.x.txt8
-rw-r--r--release-notes/Colibri_VF_LinuxReleaseNotesV2.x.txt29
4 files changed, 49 insertions, 34 deletions
diff --git a/release-notes/Apalis_T30_LinuxReleaseNotesV2.x.txt b/release-notes/Apalis_T30_LinuxReleaseNotesV2.x.txt
index 39818a2..c90c076 100644
--- a/release-notes/Apalis_T30_LinuxReleaseNotesV2.x.txt
+++ b/release-notes/Apalis_T30_LinuxReleaseNotesV2.x.txt
@@ -429,8 +429,8 @@ Working on latest image:
- RTC (Tegra internal, PMIC and board level I2C RTC)
- Gigabit Ethernet enpXs0, X being its PCIe bus number
- eMMC ext3
- - serial console debug UARTA aka UART1
- - high speed serial UARTB aka UART3, UARTC aka UART4 and UARTD aka UART2
+ - serial console debug UARTA aka UART1 ttyS0
+ - high speed serial UARTB aka UART3, UARTC aka UART4 and UARTD aka UART2 ttyHSX
- I2C via /dev/i2c-X
- 8-bit MMC card mmc1
- 4-bit SD card mmc2
@@ -439,12 +439,11 @@ Working on latest image:
- HDA audio (on Eval Board V1.0a: check datasheet/schematics for patch
instructions)
- analogue audio capture, playback and resistive touch
- - audio noise is high, workaround is to set headphone volume to maximum and
- use the DAC volume
+ - audio noise is high, workaround is to set headphone volume to maximum and use the DAC volume
- touch has some jitter
- SPI via /dev/spidev0.0 aka SPI1 and /dev/spidev4.2 aka SPI2
- framebuffer console
- - custom Ethernet MAC Address
+ - custom Ethernet MAC address
- serial number and board revision
- watchdog
- USB host port
@@ -453,7 +452,7 @@ Working on latest image:
- USB raw HID device /dev/hidrawX
- USB device Ethernet RNDIS, provided by Android gadget
- automatic USB device/host/suspend detection aka full OTG support
- - analog input
+ - analogue input
- CAN via can0 and can1
- PCIe (regular ports and mini-PCIe slot)
- SATA (regular port or mSATA slot)
@@ -473,7 +472,7 @@ Working on latest image:
Not working or not tested:
- U-Boot boot loader
- U-Boot USB keyboard
- - framebuffer support
+ - TFTLCD framebuffer support
- Linux kernel
- IrDA
- RS-422/485
@@ -547,4 +546,4 @@ If the boot loader on the module got corrupted this recovers it by loading U-Boo
- run ./update.sh -d
- stop at the U-Boot prompt and begin the update as stated above
-Toradex, December 19, 2014
+Toradex, February 12, 2014
diff --git a/release-notes/Colibri_T20_LinuxReleaseNotesV2.x.txt b/release-notes/Colibri_T20_LinuxReleaseNotesV2.x.txt
index 1ca0774..a9c2bda 100644
--- a/release-notes/Colibri_T20_LinuxReleaseNotesV2.x.txt
+++ b/release-notes/Colibri_T20_LinuxReleaseNotesV2.x.txt
@@ -15,6 +15,24 @@ Licensing:
- customer required to obtain proper re-distribution license
********************************************************************************
+Linux Image V2.3 Beta 7 (February 03, 2015)
+- U-Boot:
+ - no changes
+- Linux kernel:
+ - integrate NVIDIA L4T R16.5
+ - optional ADV7280 analogue video decoder support
+- Linux user-space:
+ - working Angstrom opkg package feeds
+
+- sources git.toradex.com tag Colibri_T20_LinuxImageV2.3Beta7_20150203
+ - repository linux-toradex branch tegra
+ - repository u-boot-toradex branch colibri
+
+Known Issues:
+- LP1 suspend might fail due to pending USB interrupts
+- LP1 suspend might hang due to display controller issue
+
+********************************************************************************
Linux Image V2.3 Beta 5 (December 19, 2014)
- U-Boot:
- no changes
@@ -413,18 +431,18 @@ Working on latest image:
- temperature sensor /sys/bus/i2c/devices/4-004c
- RTC (Tegra internal, PMIC and board level I2C RTC)
- Ethernet eth0
- - NAND flash MTD YAFFS2
- - serial console debug UARTA
- - high speed serial UARTB and UARTD
+ - NAND flash MTD YAFFS2 with hardware ECC
+ - serial console debug UARTA ttyS0
+ - high speed serial UARTB and UARTD ttyHSX
- I2C via /dev/i2c-X
- MMC/SD card, optional 8-bit SDHCI
- PWM LEDs /sys/class/leds/
- HDMI SPDIF audio
- - AC97 audio capture, playback and resistive touch
+ - AC97 analogue audio capture, playback and resistive touch
- SPI via /dev/spidev3.0
- GMI with multiplexed nPWE and RDnWR
- framebuffer console
- - custom Ethernet MAC Address
+ - custom Ethernet MAC address
- serial number and board revision
- watchdog
- USB host port
@@ -452,7 +470,6 @@ Not working or not tested:
- IrDA
- RS-422/485
- Adobe Flash not provided by L4T (and probably never will)
-- opkg package feeds seem to not be usable
*****************************************************************************************************************************************************************************************
NAND Boot: Colibri T20 256MB V1.1b (Sample), Colibri T20 512MB V1.1c (Sample), Colibri T20 256MB V1.2a, Colibri T20 512MB V1.2a, Colibri T20 256MB IT V1.2a or Colibri T20 512MB IT V1.2a
@@ -521,4 +538,4 @@ Boot from SD Card:
- power cycle
- upon first boot post-install scripts are run which takes around 2 minutes, please be patient
-Toradex, December 19, 2014
+Toradex, February 12, 2015
diff --git a/release-notes/Colibri_T30_LinuxReleaseNotesV2.x.txt b/release-notes/Colibri_T30_LinuxReleaseNotesV2.x.txt
index f5499d3..c73e359 100644
--- a/release-notes/Colibri_T30_LinuxReleaseNotesV2.x.txt
+++ b/release-notes/Colibri_T30_LinuxReleaseNotesV2.x.txt
@@ -466,8 +466,8 @@ Working on latest image:
- RTC (Tegra internal, PMIC and board level I2C RTC)
- Ethernet eth0
- eMMC ext3
- - serial console debug UARTA
- - high speed serial UARTB and UARTD
+ - serial console debug UARTA ttyS0
+ - high speed serial UARTB and UARTD ttyHSX
- I2C via /dev/i2c-X
- MMC/SD card, optional 8-bit SDHCI
- PWM LEDs /sys/class/leds/
@@ -478,7 +478,7 @@ Working on latest image:
- SPI via /dev/spidev0.0
- GMI with multiplexed nPWE and RDnWR
- framebuffer console
- - custom Ethernet MAC Address
+ - custom Ethernet MAC address
- serial number and board revision
- watchdog
- USB host port
@@ -576,4 +576,4 @@ If the boot loader on the module got corrupted this recovers it by loading U-Boo
- run ./update.sh -d
- stop at the U-Boot prompt and begin the update as stated above
-Toradex, December 19, 2014
+Toradex, February 12, 2014
diff --git a/release-notes/Colibri_VF_LinuxReleaseNotesV2.x.txt b/release-notes/Colibri_VF_LinuxReleaseNotesV2.x.txt
index b333db1..b1a4ca2 100644
--- a/release-notes/Colibri_VF_LinuxReleaseNotesV2.x.txt
+++ b/release-notes/Colibri_VF_LinuxReleaseNotesV2.x.txt
@@ -19,18 +19,18 @@ Linux Image V2.3 Beta 7 (February 03, 2015)
- Linux kernel:
- update to 3.18.5 stable Linux kernel
- add software AC97 SAI driver to communicate with the Wolfson WM9712
- AC97 codec for analogue audio playback and resitive touchscreen support
+ AC97 codec for analogue audio playback and resistive touchscreen support
- add backlight support with a intermediary PWM duty cycle
- add FlexCAN device tree nodes (disabled in the eval-v3 device tree)
- add GPIO default pinmux entries for all default GPIO pins (enables export
of GPIO's using sysfs for most pins)
- enable debug access port which is supported by hw-breakpoint/perf framework
- - fix boot freeze due to uninizialized DCU layers (observed on Colibri VF50)
+ - fix boot freeze due to uninitialised DCU layers (observed on Colibri VF50)
- fix DSPI driver, use hardware chip select and memory leak
- fix several bugs in UART driver when using in DMA as well as interrupt mode
- decrease ADC clock to be within specified range, use different sampling
settings to avoid issues with temperature sensor
- - improve pixelclock precission by using a higher DCU input clock
+ - improve pixelclock precision by using a higher DCU input clock
- rename GPIO nodes to start with zero (as in the reference manual)
- remove wrong touchscreen nodes in common device tree vf-colibri.dtsi
- Linux user-space:
@@ -372,7 +372,7 @@ Known Issues:
********************************************************************************
Notes:
-- 115200 baud serial debug console on UART0 aka FFUART (lower X25 on EvalBoards resp. X27 on V3.1a depending on JP17/19, X13 on Iris) without any handshake
+- 115200 baud serial debug console on UARTA aka FFUART (lower X25 on EvalBoards resp. X27 on V3.1a depending on JP17/19, X13 on Iris) without any handshake
- user account: root with empty password
- UBIFS flash root file system
- opkg package manager
@@ -389,21 +389,24 @@ Working on latest image:
- Toradex Colibri configuration block handling
- module type auto detection
- USB storage as host on USB host port
- - USB device DFU
+ - USB device firmware upgrade (DFU) as device on USB OTG port
- Linux kernel
- GPIOlib /sys/class/gpio
- - PWM /sys/class/pwm/
- temperature sensor /sys/bus/iio/devices/iio\:device0/in_temp_input
- RTC (Vybrid internal without wakeup support and board level I2C RTC)
- Ethernet eth0
- NAND flash MTD UBIFS with hardware ECC
- - serial console debug UARTA (ttyLP0)
+ - serial console debug UARTA ttyLP0
- serial UARTA/UARTB and UARTC up to 921600, including RTS/CTS
- I2C via /dev/i2c-X
- MMC/SD card ESDHC2
+ - PWM /sys/class/pwm/
+ - Colibri VF61: AC97 analogue audio playback and resistive touch
+ - SPI (DSPI) via /dev/spidev1.0
- framebuffer console
- custom Ethernet MAC address
- serial number and board revision
+ - watchdog
- USB host port
- USB raw HID device /dev/hidrawX
- USB device Ethernet RNDIS
@@ -411,7 +414,6 @@ Working on latest image:
- analogue inputs /sys/bus/iio/devices/
- power management (standby is Stop mode)
- interrupt router (peripheral gets routed on interrupt request)
- - watchdog
- optional CAN (Vybrid SoC internal)
- Linux user-space
- graphics (DCU aka parallel RGB)
@@ -419,23 +421,20 @@ Working on latest image:
- GPIO config tool
- LXDE
- Cortex M4 utility mqxboot
- - communication library libmcc
+ - multicore communication library libmcc
Not working or not tested:
- U-Boot boot loader
- USB keyboard
- framebuffer support
- Linux kernel
+ - Colibri VF61: AC97 analogue audio capture
- USB audio driver
- USB webcam
- automatic USB device/host detection aka OTG support
- IrDA
- - optional parallel camera interface
- RS-422/485
- - SPI (DSPI)
- - Colibri VF61:
- - analogue audio (early version available on git)
- - resistive touch (early version available on git)
+ - optional parallel camera interface
******************************************************************************
NAND Boot: Colibri VF50 V1.0a and V1.1a, Colibri VF61 V1.0b and V1.1b (Sample)
@@ -557,4 +556,4 @@ Boot from SD Card:
- apply power
- upon first boot post-install scripts are run which takes around 2 minutes, please be patient
-Toradex, February 03, 2015
+Toradex, February 12, 2015