diff options
Diffstat (limited to 'recipes-images/images/files/colibri-vf/update/colibri-vf_bin/flash_eth.scr')
| -rw-r--r-- | recipes-images/images/files/colibri-vf/update/colibri-vf_bin/flash_eth.scr | 28 |
1 files changed, 0 insertions, 28 deletions
diff --git a/recipes-images/images/files/colibri-vf/update/colibri-vf_bin/flash_eth.scr b/recipes-images/images/files/colibri-vf/update/colibri-vf_bin/flash_eth.scr deleted file mode 100644 index b0e4904..0000000 --- a/recipes-images/images/files/colibri-vf/update/colibri-vf_bin/flash_eth.scr +++ /dev/null @@ -1,28 +0,0 @@ -setenv create_bcb 'nand erase.part vf-bcb && writebcb 0x20000 0x20000' -setenv update_configblock 'tftpboot ${fdt_addr_r} ${board_name}/configblock.bin && nand write ${fdt_addr_r} 0x800 ${filesize}' - -# Migrate to UBI volume based boot schema -setenv prepare_kernel_fdt 'ubi create kernel 0x800000 static && ubi create dtb 0x20000 static' -setenv prepare_rootfs 'ubi create rootfs 0 dynamic' -setenv prepare_ubi 'ubi part ubi && if ubi check rootfs; then if ubi check kernel; then else ubi remove rootfs && run prepare_kernel_fdt && run prepare_rootfs; fi; else run prepare_kernel_fdt && run prepare_rootfs; fi' - -setenv update_uboot 'tftpboot ${fdt_addr_r} ${board_name}/u-boot-nand.imx && nand erase.part u-boot && nand erase.part u-boot-env && nand write ${fdt_addr_r} u-boot' -setenv update_kernel 'tftpboot ${fdt_addr_r} ${board_name}/zImage && ubi write ${fdt_addr_r} kernel ${filesize}' -setenv update_fdt 'tftpboot ${fdt_addr_r} ${board_name}/${soc}-colibri-${fdt_board}.dtb && ubi write ${fdt_addr_r} dtb ${filesize}' -setenv update_rootfs 'tftpboot ${fdt_addr_r} ${board_name}/ubifs.img && ubi write ${fdt_addr_r} rootfs ${filesize}' - -setenv update_new 'run update_uboot; run prepare_ubi && run update_kernel && run update_fdt && run update_rootfs; reset' - -# Upgrade part 1, write new U-Boot, but with old ECC format still... -# Store config block temporarly in memory at kernel_addr_r. -setenv upgrade_part1 'run update_uboot && nand read ${kernel_addr_r} 0x800 0x20 && echo "${upgrade_part1_msg}"' -setenv upgrade_part1_msg 'Successfully updated U-Boot, NAND upgrade required. Enter "reset", interrupt boot process and enter "run setupdate; run upgrade_part2" to complete upgrade.' - -# Upgrade part 2, use new ECC format for the whole device... -setenv upgrade_part2 'run create_bcb && nand write ${kernel_addr_r} 0x800 0x20 && run update_uboot && nand erase.part ubi && run update_rootfs && echo ${upgrade_part2_msg}' -setenv upgrade_part2_msg 'Successfully upgraded module, enter "reset" to restart the module.' - -# fsl_nfc indicates old NAND format (24-bit ECC), start migration process -setenv update 'mtdparts default && if test "${mtdids}" = "nand0=fsl_nfc"; then; run upgrade_part1; else run update_new; fi' - -echo 'enter "run update" to update the entire module' |