diff options
Diffstat (limited to 'recipes-images/images/files/colibri-vf/update/format_sd.sh')
| -rwxr-xr-x | recipes-images/images/files/colibri-vf/update/format_sd.sh | 115 |
1 files changed, 0 insertions, 115 deletions
diff --git a/recipes-images/images/files/colibri-vf/update/format_sd.sh b/recipes-images/images/files/colibri-vf/update/format_sd.sh deleted file mode 100755 index 79cc985..0000000 --- a/recipes-images/images/files/colibri-vf/update/format_sd.sh +++ /dev/null @@ -1,115 +0,0 @@ -#! /bin/sh -# Format a SD card to be used for flashing a Colibri VFxx module -# Then calls update.sh to add needed files - -# sometimes we need the binary echo, not the shell builtin -ECHO=`which echo` - -Usage() -{ - echo "" - echo "Formats and fills a SD card with files for flashing the internal NAND of a" - echo "Colibri VFxx. Optionally creates a rootfs partition to allow booting and taking" - echo "kernel and rootfs from SD card." - echo "ALL DATA ON THE DEVICE GIVEN WITH -d WILL BE DELETED!!" - echo - echo "Requires a running U-Boot on the target. Either one already flashed on the NAND" - echo "or strapping the board to boot from SD card and booting U-Boot from the card" - echo "(only possible on older samples without blown boot fuses)." - echo "" - echo "-h : Prints this message" - echo "" - echo "-d FILE : device file of the SD card" - echo "-f : additionally copy the rootfs into the second partition" - echo "-s : optimise file system for 128MB NAND, increases usable space" - echo " on VF50 module a little, but on VF61 uses also only 128MB" - echo "" - echo "Example \"./format_sd.sh -d /dev/mmcblk0\" prepares the SD card /dev/mmcblk0" - echo "" -} - -#initialise options -DEV="/dev/null" -CFGBLOCK_ONLY=0 -DEBUG_ONLY=0 -KERNEL_ONLY=0 -UBOOT_ONLY=0 -CP_ROOTFS=0 - -while getopts "hd:fs" Option ; do - case $Option in - h) Usage - # Exit if only usage (-h) was specified. - if [[ $# -eq 1 ]] ; then - exit 10 - fi - exit 0 - ;; - d) DEV=$OPTARG - ;; - f) CP_ROOTFS=1 - ;; - s) UPDATE_OPTS="-s" - esac -done - -DEVNAME=`basename $DEV` -DEVNAMESTART=`echo $DEVNAME | cut -c 1-3` - -# sanity checks to try and not touch one of the users hard drives or other issues -if [ ! -b $DEV ] ; then - echo $DEV "is not a block device, " - echo "please specify the device file representing your SD card" - exit 1 -fi -if [ "$DEVNAMESTART" = "sda" ] ; then - echo $DEV "seems to be your primary hard disk," - echo "please specify the device file representing your SD card" - exit 1 -fi -if [ ! -d /sys/block/$DEVNAME ] ; then - echo "/sys/block/$DEVNAME" - echo $DEV "seems to not be a disk, please specify the device file" - echo "representing your SD card (without any trailing number)" - exit 1 -fi -IS_USB_MMC=`ls -l /sys/block/$DEVNAME | grep -c "usb\|mmc"` -if [ $IS_USB_MMC -eq 0 ] ; then - echo $DEV "seems not to be connected over USB or MMC, please specify the device file" - echo "representing your SD card (without any trailing number)" - exit 1 -fi - -if [ "$DEVNAMESTART" = "mmc" ] ; then - PART_PREFIX="p" -else - PART_PREFIX="" -fi -# make sure the partitions are unmounted -sudo umount ${DEV}${PART_PREFIX}? - -# partition and format the vfat partition -sudo parted -s $DEV mklabel msdos mkpart primary fat32 1MB 512MB mkpart primary ext3 512MB 100% -sudo umount ${DEV}${PART_PREFIX}1 -sudo mkfs.fat -n UPDATE ${DEV}${PART_PREFIX}1 - -# dd U-Boot onto the SD card -sudo dd if=colibri-vf_bin/u-boot.imx of=${DEV} bs=512 seek=2 - -sudo mkdir -p mntpoint1 -sudo mount -t vfat ${DEV}${PART_PREFIX}1 mntpoint1 -o umask=0 - -# now copy U-Boot, kernel and ubi-img to the KERNEL partition -DEST=`readlink -e mntpoint1` -./update.sh -o "$DEST" $UPDATE_OPTS - -#copy the rootfs -if [ "$CP_ROOTFS" -eq 1 ] ; then - sudo umount ${DEV}${PART_PREFIX}2 - sudo mkfs.ext3 -L RFS ${DEV}${PART_PREFIX}2 && sync - sudo mkdir -p mntpoint2 - sudo mount -t ext3 ${DEV}${PART_PREFIX}2 mntpoint2 - sudo cp -pPr rootfs/* mntpoint2/ -fi - -sudo umount ${DEV}${PART_PREFIX}? |