diff options
Diffstat (limited to 'recipes/images/files/colibri-t20/colibri-t20_bin/flash_blk.scr')
| -rw-r--r-- | recipes/images/files/colibri-t20/colibri-t20_bin/flash_blk.scr | 8 |
1 files changed, 4 insertions, 4 deletions
diff --git a/recipes/images/files/colibri-t20/colibri-t20_bin/flash_blk.scr b/recipes/images/files/colibri-t20/colibri-t20_bin/flash_blk.scr index 790c1bb..54c3d4d 100644 --- a/recipes/images/files/colibri-t20/colibri-t20_bin/flash_blk.scr +++ b/recipes/images/files/colibri-t20/colibri-t20_bin/flash_blk.scr @@ -11,16 +11,16 @@ setenv migrate_4 'nand read $loadaddr 0x7900000 0x40; crc32 -v $toradex_oui_addr setenv migrate_configblock 'setexpr toradex_oui_addr $loadaddr + 8; run migrate_1; run migrate_2; run migrate_3; run migrate_4' # Migrate to UBI volume based boot schema -setenv prepare_kernel_dtb 'ubi create kernel 0x800000 static && ubi create dtb 0x20000 static' +setenv prepare_kernel_fdt 'ubi create kernel 0x800000 static && ubi create dtb 0x20000 static' setenv prepare_rootfs 'ubi create rootfs - dynamic' -setenv prepare_ubi 'ubi part ubi && if ubi check rootfs; then if ubi check kernel; then else ubi remove rootfs && run prepare_kernel_dtb && run prepare_rootfs; fi; else run prepare_kernel_dtb && run prepare_rootfs; fi' +setenv prepare_ubi 'ubi part ubi && if ubi check rootfs; then if ubi check kernel; then else ubi remove rootfs && run prepare_kernel_fdt && run prepare_rootfs; fi; else run prepare_kernel_fdt && run prepare_rootfs; fi' setenv update_configblock 'load ${interface} 0:1 ${loadaddr} ${board_name}/configblock.bin && nand erase.part cfgblock && nand write ${loadaddr} cfgblock ${filesize}' setenv update_uboot 'fatload ${interface} 0:1 ${loadaddr} ${board_name}/${board_name}-${ram-size}-${hw-version}-nand.img && nand erase 0x0 0x300000 && nand write ${loadaddr} 0x0 ${filesize}' setenv update_kernel 'fatload ${interface} 0:1 ${loadaddr} ${board_name}/zImage && ubi write ${loadaddr} kernel ${filesize}' #Writting data to invalidate current device tree -setenv update_dtb 'mw.w ${loadaddr} 0xFF 16 && ubi write ${loadaddr} dtb 16 && fatload ${interface} 0:1 ${loadaddr} ${board_name}/${soc}-colibri-${fdt_board}.dtb && +setenv update_fdt 'mw.w ${loadaddr} 0xFF 16 && ubi write ${loadaddr} dtb 16 && fatload ${interface} 0:1 ${loadaddr} ${board_name}/${soc}-colibri-${fdt_board}.dtb && ubi write ${loadaddr} dtb ${filesize}' setenv update_rootfs 'fatload ${interface} 0:1 ${loadaddr} ${board_name}/ubifs_${leb-size}.img && ubi write ${loadaddr} rootfs ${filesize}' @@ -28,7 +28,7 @@ setenv echo_v2.3b7 echo "successfully updated U-Boot," \${note} "power-cycle and setenv migrate_v2.3b7 'run migrate_configblock; nand erase.part ubi; run update_new' setenv update_v2.3b7 'setenv ram-size 256; run update_uboot && setenv note "wait a sec," && run echo_v2.3b7 && md 0x1ffffffc 1 && setenv ram-size 512 && run update_uboot && setenv note && run echo_v2.3b7' -setenv update_new 'run check_configblock || run migrate_configblock; run update_uboot; run prepare_ubi && run update_kernel && run update_rootfs && run update_dtb; reset' +setenv update_new 'run check_configblock || run migrate_configblock; run update_uboot; run prepare_ubi && run update_kernel && run update_rootfs && run update_fdt; reset' setenv update 'if test -v $ver; then run update_new; else run update_v2.3b7; fi' echo 'enter "run update" to update the entire module' |