summaryrefslogtreecommitdiff
path: root/release-notes
diff options
context:
space:
mode:
Diffstat (limited to 'release-notes')
-rw-r--r--release-notes/Apalis_T30_LinuxReleaseNotesV2.x.txt438
-rw-r--r--release-notes/Colibri_T30_LinuxReleaseNotesV2.x.txt523
2 files changed, 497 insertions, 464 deletions
diff --git a/release-notes/Apalis_T30_LinuxReleaseNotesV2.x.txt b/release-notes/Apalis_T30_LinuxReleaseNotesV2.x.txt
index 198c517..9d3adc1 100644
--- a/release-notes/Apalis_T30_LinuxReleaseNotesV2.x.txt
+++ b/release-notes/Apalis_T30_LinuxReleaseNotesV2.x.txt
@@ -1,221 +1,223 @@
-***********************************************
-Release Notes: Linux Image V2.x for Apalis T30
-***********************************************
-
-Contents:
-- U-Boot 2011.06 boot loader
-- Linux 3.1.10 kernel, based on NVIDIA's Linux for Tegra (L4T) release 16-r3
-- OpenEmbedded oe-core 2012.10 based root file system, using LXDE desktop environment
-
-Licensing:
-- proprietary multimedia codecs included for evaluation purpose only
-- customer required to obtain proper re-distribution license
-
-********************************************************************************
-Linux Image V2.0 Beta 2 (August 19, 2013)
-This updates u-boot and kernel to cope with the increased eMMC and changed T30
-CPU SKU on Apalis T30 - 2GB V1.0C
-- U-Boot:
- - eMMC and RAM size / offset detection
- - rename shell prompt colibri
-- Linux kernel:
- - workaround limited CPU clock
- - provision for the Analogue Camera Module
- - v4l kernel drivers configured as kernel modules
-- rootfs / oe-core:
- - update to latest git revision for kernel and u-boot
- - image added relevant v4l kernel modules plus v4l-utils
-
-- sources git.toradex.com tag Apalis_T30_LinuxImageV2.0Beta2_20130819
-
-Known Issues:
-- We are in an early Beta state, not all functions are tested.
-- If a a monitor is connected to DVI, the kernel sometime hangs when the
- display controller DC1 is initialised. -> reboot required.
-- LVDS aka TFTLCD resolution hard-coded in kernel to full HD resolution,
- comments with timings for other resolutions provided
-- lxappearance is segfaulting upon start
-- connecting an analogue mic to the on module codec resets the codec, so that
- neither headphone out nor mic in works anymore. Workaround: Have mic
- connected before boot or change the output source between DAC/LineIn
-- certain low-speed USB devices might not get detected
+***********************************************
+Release Notes: Linux Image V2.x for Apalis T30
+***********************************************
+
+Contents:
+- U-Boot 2011.06 boot loader
+- Linux 3.1.10 kernel, based on NVIDIA's Linux for Tegra (L4T) release 16-r3
+- OpenEmbedded oe-core 2012.10 based root file system, using LXDE desktop environment
+
+Licensing:
+- proprietary multimedia codecs included for evaluation purpose only
+- customer required to obtain proper re-distribution license
+
+********************************************************************************
+Linux Image V2.0 Beta 2 (August 19, 2013)
+This updates u-boot and kernel to cope with the increased eMMC and changed T30
+CPU SKU on Apalis T30 - 2GB V1.0c, Apalis T30 - 1GB V1.0a
+- U-Boot:
+ - eMMC and RAM size / offset detection
+ - rename shell prompt to Apalis T30
+- Linux kernel:
+ - workaround limited CPU clock
+ - provision for the Analogue Camera Module
+ - v4l kernel drivers configured as kernel modules
+- rootfs / oe-core:
+ - update to latest git revision for kernel and u-boot
+ - image added relevant v4l kernel modules plus v4l-utils
+
+- sources git.toradex.com tag Apalis_T30_LinuxImageV2.0Beta2_20130816
+
+Known Issues:
+- We are in an early Beta state, not all functions are tested.
+- If a a monitor is connected to DVI, the kernel sometime hangs when the
+ display controller DC1 is initialised. -> reboot required.
+- LVDS aka TFTLCD resolution hard-coded in kernel to full HD resolution,
+ comments with timings for other resolutions provided
+- lxappearance is segfaulting upon start
+- connecting an analogue mic to the on module codec resets the codec, so that
+ neither headphone out nor mic in works anymore. Workaround: Have mic
+ connected before boot or change the output source between DAC/LineIn
+- certain low-speed USB devices might not get detected
- on first boot the resizing process adversely affects system performance for
- the first few minutes until completed
-
-********************************************************************************
-Linux Image V2.0 Beta 1 (June 26, 2013)
-- U-Boot:
- - initial integration
- - integrate NVIDIA partition table parsing incl. Toradex Apalis configuration block
- - adjust available amount of memory
- - activate DVI-D framebuffer console
- - increase CPU frequency at boot
- - decrease boot delay
- - fix overflow in HCD conversion
-- Linux kernel:
- - hack to make newer SD cards work by adding a quirk for lack of 1.8v support
- - revise Ethernet MAC address assignment
- - fix PCIe AXI response decoding errors
- - fix PCIe reset issue
- - remove spurious tegra_aes_device
- - video4linux adv7180 and max9526 integration
- - fix PCIe by forcing GEN1 speed
- - set board local critical temperature to 95°C
- - hack to avoid 24 Hz mode in X resulting in no display at all
- - silence extensive HDMI HDA audio messages
-- rootfs / oe-core:
- - update to latest git revision for kernel and u-boot
- - extend rootfs partition on eMMC to its full partition size on first boot
- - unified update procedure for all T20/T30
- - limit journal size
- - nv-binaries: update to L4T R16.3
- - added packages: gstreamer deinterlacer, scrot
- - lxterminal, florence: fix garbled titlebar
-
-- sources git.toradex.com tag Apalis_T30_LinuxImageV2.0Beta1_20130626
-
-Known Issues:
-- We are in an early Beta state, not all functions are tested.
-- If a a monitor is connected to DVI, the kernel sometime hangs when the
- display controller DC1 is initialised. -> reboot required.
-- LVDS aka TFTLCD resolution hard-coded in kernel to full HD resolution,
- comments with timings for other resolutions provided
-- lxappearance is segfaulting upon start
-- connecting an analogue mic to the on module codec resets the codec, so that
- neither headphone out nor mic in works anymore. Workaround: Have mic
- connected before boot or change the output source between DAC/LineIn
-- certain low-speed USB devices might not get detected
+ the first few minutes until completed
+
+********************************************************************************
+Linux Image V2.0 Beta 1 (June 26, 2013)
+- U-Boot:
+ - initial integration
+ - integrate NVIDIA partition table parsing incl. Toradex Apalis configuration block
+ - adjust available amount of memory
+ - activate DVI-D framebuffer console
+ - increase CPU frequency at boot
+ - decrease boot delay
+ - fix overflow in HCD conversion
+- Linux kernel:
+ - hack to make newer SD cards work by adding a quirk for lack of 1.8v support
+ - revise Ethernet MAC address assignment
+ - fix PCIe AXI response decoding errors
+ - fix PCIe reset issue
+ - remove spurious tegra_aes_device
+ - video4linux adv7180 and max9526 integration
+ - fix PCIe by forcing GEN1 speed
+ - set board local critical temperature to 95°C
+ - hack to avoid 24 Hz mode in X resulting in no display at all
+ - silence extensive HDMI HDA audio messages
+- rootfs / oe-core:
+ - update to latest git revision for kernel and u-boot
+ - extend rootfs partition on eMMC to its full partition size on first boot
+ - unified update procedure for all T20/T30
+ - limit journal size
+ - nv-binaries: update to L4T R16.3
+ - added packages: gstreamer deinterlacer, scrot
+ - lxterminal, florence: fix garbled titlebar
+
+- sources git.toradex.com tag Apalis_T30_LinuxImageV2.0Beta1_20130626
+
+Known Issues:
+- We are in an early Beta state, not all functions are tested.
+- If a a monitor is connected to DVI, the kernel sometime hangs when the
+ display controller DC1 is initialised. -> reboot required.
+- LVDS aka TFTLCD resolution hard-coded in kernel to full HD resolution,
+ comments with timings for other resolutions provided
+- lxappearance is segfaulting upon start
+- connecting an analogue mic to the on module codec resets the codec, so that
+ neither headphone out nor mic in works anymore. Workaround: Have mic
+ connected before boot or change the output source between DAC/LineIn
+- certain low-speed USB devices might not get detected
- on first boot the resizing process adversely affects system performance for
- the first few minutes until completed
-
-********************************************************************************
-Linux Image V2.0 Alpha 1 (March 15, 2013)
-(ported form the Linux Image V2.0 Beta1 for Colibri T30)
-- U-Boot:
- - first release
-- Linux kernel:
- - first release
-- oe-core:
- - first release
-- sources git.toradex.com tag Apalis_T30_LinuxImageV2.0Alpha1_20130315
-
-Known Issues:
-- We are in an early Alpha state, not all functions are tested.
-- If a a monitor is connected to DVI, the kernel sometime hangs when the
- display controller DC1 is initialised. -> reboot required.
-- LVDS aka TFTLCD resolution hard-coded in kernel to full HD resolution,
- comments with timings for other resolutions provided
-- some windows have garbled titlebar, e.g. lxterminal
-- lxappearance is segfaulting upon start
-- Gigabit Ethernet MAC address hard-coded to 00:0e:c6:87:72:01
-- stability issues on concurrent PCIe and SATA stress testing
-- connecting an analog mic to the on module codec resets the codec, so that
- neither headphone out nor mic in works anymore. Workaround: Have mic
- connected before boot or change the output source between DAC/LineIn
-
-********************************************************************************
-Notes:
-- 115200 baud serial debug console on UARTA aka UART1 (EvalBoard lower X28 resp. X29 depending on JP10/12) without any handshake
-- user account: root with empty password
-- ext3 root file system
-- opkg package manager
-- HDMI: not all pixel clock frequencies allow for HDMI audio
-- CRT: the T30 internal video DAC output is unsupported by NVIDIA's L4T Linux SW stack
-- Linux host used for recovery mode flashing requires proper 32-bit execution environment (e.g. install ia32-libs on 64-bit Ubuntu)
-
-Working on latest image:
-- U-Boot boot loader
- - environment storage in eMMC
- - ASIX based USB to Ethernet adapters
+ the first few minutes until completed
+
+********************************************************************************
+Linux Image V2.0 Alpha 1 (March 15, 2013)
+(ported form the Linux Image V2.0 Beta1 for Colibri T30)
+- U-Boot:
+ - first release
+- Linux kernel:
+ - first release
+- oe-core:
+ - first release
+- sources git.toradex.com tag Apalis_T30_LinuxImageV2.0Alpha1_20130315
+
+Known Issues:
+- We are in an early Alpha state, not all functions are tested.
+- If a a monitor is connected to DVI, the kernel sometime hangs when the
+ display controller DC1 is initialised. -> reboot required.
+- LVDS aka TFTLCD resolution hard-coded in kernel to full HD resolution,
+ comments with timings for other resolutions provided
+- some windows have garbled titlebar, e.g. lxterminal
+- lxappearance is segfaulting upon start
+- Gigabit Ethernet MAC address hard-coded to 00:0e:c6:87:72:01
+- stability issues on concurrent PCIe and SATA stress testing
+- connecting an analog mic to the on module codec resets the codec, so that
+ neither headphone out nor mic in works anymore. Workaround: Have mic
+ connected before boot or change the output source between DAC/LineIn
+
+********************************************************************************
+Notes:
+- 115200 baud serial debug console on UARTA aka UART1 (EvalBoard lower X28 resp. X29 depending on JP10/12) without any handshake
+- user account: root with empty password
+- ext3 root file system
+- opkg package manager
+- HDMI: not all pixel clock frequencies allow for HDMI audio
+- CRT: the T30 internal video DAC output is unsupported by NVIDIA's L4T Linux SW stack
+- Linux host used for recovery mode flashing requires proper 32-bit execution environment and awk (e.g. install ia32-libs on 64-bit Ubuntu)
+
+Working on latest image:
+- U-Boot boot loader
+ - environment storage in eMMC
+ - ASIX based USB to Ethernet adapters
- MMC/SD cards (only GPT partitioned)
- - eMMC flash with NVIDIA partition table parsing
- - serial console debug UARTA aka UART1
- - Toradex Apalis configuration block handling
- - USB storage as host
-- Linux kernel
- - GPIOlib /sys/class/gpio (LVDS transmitter configuration)
- - temperature sensor /sys/bus/i2c/devices/4-004c
- - RTC (Tegra internal, PMIC and board level I2C RTC)
- - Gigabit Ethernet eth0
- - serial console debug UARTA aka UART1
- - high speed serial UARTB aka UART3, UARTC aka UART4 and UARTD aka UART2
- - I2C via /dev/i2c-X
- - 8-bit MMC card mmc1
- - 4-bit SD card mmc2
- - PWM LEDs /sys/class/leds/
- - HDMI HDA audio
- - analog audio capture, playback and touch
- - audio noise is high, workaround is to set headphone volume to maximum and use the DAC volume
- - touch has some jitter
- - SPI via /dev/spidev0.0 aka SPI1 and /dev/spidev4.2 aka SPI2
- - framebuffer console
- - custom Ethernet MAC Address
- - serial number and board revision
- - USB host port
- - USB audio driver
- - USB webcam
- - USB raw HID device /dev/hidrawX
- - USB device Ethernet RNDIS, provided by Android gadget
- - automatic USB device/host/suspend detection aka full OTG support
- - suspend LP1
- - CAN via can0 and can1
- - PCIe (regular ports and mini-PCIe slot)
- - SATA (regular port or mSATA slot
- - DVFS power management
- - parallel camera interface
-- Linux user-space
- - graphics (LVDS-1 aka TFTLCD and HDMI-1 aka DVI-D)
- - tegrastats
- - Firefox
- - Gstreamer video encode and playback, dual full HD video decode
- - LXDE
- - tegrastats-gtk, CPU information visible in graphical environment
- - LVDS transmitter configuration (see lvds-dual-channel.sh resp. lvds-single-channel.sh)
-
-Not working or not tested:
-- U-Boot boot loader
- - U-Boot USB keyboard
- - Gigabit Ethernet
-- Linux kernel
- - analog input AD0 .. AD3 not implemented
- - watchdog
- - HDA audio
- - IrDA
- - RS-422/485
- - SIM card
-- Linux user-space
- - Adobe Flash not provided by L4T (and probably never will)
- - opkg package feeds don't seem to be usable
- - GPIO config tool missing Apalis MXM3 pin description integration
-
-**********************************************
-eMMC Boot: Apalis T30 V1.0a and V1.0b (Sample)
-**********************************************
-
-Initial Preparation:
-- download and extract T30_LinuxImageVx.yz.tar.bz2 package with root permissions
-
-Flash eMMC:
-- EvalBoard V1.0a
- - connect USB micro A/B (X49) or USB B (X50) to development workstation using micro or regular USB cable
- - connect serial debug console to lower X28 or X29 using null modem RS-232 or regular USB cable
- - enter recovery mode:
- - Eboot (e.g. transitioning from WEC):
- - 115200 baud without any handshake
- - hold space key while applying power or resetting
- - press x to enter command mode
- - use 'reboot rcm' command
- - U-Boot (e.g. updating Embedded Linux):
- - 115200 baud without any handshake
- - apply power or reset
- - hit any key to stop auto booting
- - use 'enterrcm' command
- - for more information about recovery mode please consult Apalis T30 datasheet chapter 6
-- run update.sh script
-
-Boot from eMMC:
-- EvalBoard V1.0a
-- power cycle
-- upon first boot post-install scripts are run which takes around 2 minutes, please be patient
-
-Toradex, August 19, 2013
+ - eMMC flash with NVIDIA partition table parsing
+ - serial console debug UARTA aka UART1
+ - Toradex Apalis configuration block handling
+ - USB storage as host
+- Linux kernel
+ - GPIOlib /sys/class/gpio (LVDS transmitter configuration)
+ - temperature sensor /sys/bus/i2c/devices/4-004c
+ - RTC (Tegra internal, PMIC and board level I2C RTC)
+ - Gigabit Ethernet eth0
+ - serial console debug UARTA aka UART1
+ - high speed serial UARTB aka UART3, UARTC aka UART4 and UARTD aka UART2
+ - I2C via /dev/i2c-X
+ - 8-bit MMC card mmc1
+ - 4-bit SD card mmc2
+ - PWM LEDs /sys/class/leds/
+ - HDMI
+ audio
+ - HDA audio (on Eval Board V1.0a: check datasheet/schematics for patch instructions)
+ - analog audio capture, playback and touch
+ - audio noise is high, workaround is to set headphone volume to maximum and use the DAC volume
+ - touch has some jitter
+ - SPI via /dev/spidev0.0 aka SPI1 and /dev/spidev4.2 aka SPI2
+ - framebuffer console
+ - custom Ethernet MAC Address
+ - serial number and board revision
+ - USB host port
+ - USB audio driver
+ - USB webcam
+ - USB raw HID device /dev/hidrawX
+ - USB device Ethernet RNDIS, provided by Android gadget
+ - automatic USB device/host/suspend detection aka full OTG support
+ - suspend LP1
+ - CAN via can0 and can1
+ - PCIe (regular ports and mini-PCIe slot)
+ - SATA (regular port or mSATA slot
+ - DVFS power management
+ - parallel camera interface
+- Linux user-space
+ - graphics (LVDS-1 aka TFTLCD and HDMI-1 aka DVI-D)
+ - tegrastats
+ - Firefox
+ - Gstreamer video encode and playback, dual full HD video decode
+ - LXDE
+ - tegrastats-gtk, CPU information visible in graphical environment
+ - LVDS transmitter configuration (see lvds-dual-channel.sh resp. lvds-single-channel.sh)
+
+Not working or not tested:
+- U-Boot boot loader
+ - U-Boot USB keyboard
+ - Gigabit Ethernet
+- Linux kernel
+ - analog input AD0 .. AD3 not implemented
+ - watchdog
+ - IrDA
+ - RS-422/485
+ - SIM card
+- Linux user-space
+ - Adobe Flash not provided by L4T (and probably never will)
+ - opkg package feeds don't seem to be usable
+ - GPIO config tool missing Apalis MXM3 pin description integration
+
+*********************************************************
+eMMC Boot: Apalis T30 2GB V1.0a, V1.0b and V1.0c (Sample)
+eMMC Boot: Apalis T30 1GB V1.0a (Sample)
+*********************************************************
+
+Initial Preparation:
+- download and extract T30_LinuxImageVx.yz.tar.bz2 package with root permissions
+
+Flash eMMC:
+- EvalBoard V1.0a
+ - connect USB micro A/B (X49) or USB B (X50) to development workstation using micro or regular USB cable
+ - connect serial debug console to lower X28 or X29 using null modem RS-232 or regular USB cable
+ - enter recovery mode:
+ - Eboot (e.g. transitioning from WEC):
+ - 115200 baud without any handshake
+ - hold space key while applying power or resetting
+ - press x to enter command mode
+ - use 'reboot rcm' command
+ - U-Boot (e.g. updating Embedded Linux):
+ - 115200 baud without any handshake
+ - apply power or reset
+ - hit any key to stop auto booting
+ - use 'enterrcm' command
+ - for more information about recovery mode please consult Apalis T30 datasheet chapter 6
+- run update.sh script
+
+Boot from eMMC:
+- EvalBoard V1.0a
+- power cycle
+- upon first boot post-install scripts are run which takes around 2 minutes, please be patient
+
+Toradex, August 19, 2013
diff --git a/release-notes/Colibri_T30_LinuxReleaseNotesV2.x.txt b/release-notes/Colibri_T30_LinuxReleaseNotesV2.x.txt
index d1a431c..962d59e 100644
--- a/release-notes/Colibri_T30_LinuxReleaseNotesV2.x.txt
+++ b/release-notes/Colibri_T30_LinuxReleaseNotesV2.x.txt
@@ -1,250 +1,281 @@
-************************************************
-Release Notes: Linux Image V2.x for Colibri T30
-************************************************
-
-Contents:
-- U-Boot 2011.06 boot loader
-- Linux 3.1.10 kernel, based on NVIDIA's Linux for Tegra (L4T) release 16-r3
-- OpenEmbedded oe-core 2012.10 based root file system, using LXDE desktop environment
-
-Licensing:
-- proprietary multimedia codecs included for evaluation purpose only
-- customer required to obtain proper re-distribution license
-
-********************************************************************************
-Linux Image V2.0 Beta 2 (June 26, 2013)
-- U-Boot:
- - integrate NVIDIA partition table parsing incl. Toradex Colibri configuration block
- - increase CPU frequency at boot
- - decrease boot delay
- - fix overflow in HCD conversion
-- Linux kernel:
- - allow easy integration of a custom Linux boot logo
- - add TouchRev Fusion 10 aka CPT CLAA101NC05 display timings
- - integrate TouchRev Fusion 7 and 10 multi-touch driver
- - fix gpio-key pull-ups
- - enable back key wake-up
- - rename UARTs and PWM LEDs
- - explicitly configure for 4-bit MMC/SD cards by default
- - integrate MCP251x and SJA1000 CAN support
- - fix Ethernet MAC address assignment after suspend
- - hack to make newer SD cards work by adding a quirk for lack of 1.8v support
- - export some GPIOs via /sys/class/gpio
- - add comment about GMI_ADV_N usage
- - remove spurious tegra_aes_device
- - video4linux adv7180 and max9526 integration
- - set board local critical temperature to 95°C
- - hack to avoid 24 Hz mode in X resulting in no display at all
-- rootfs / oe-core:
- - update to latest git revision for kernel and u-boot
- - extend rootfs partition on eMMC to its full partition size on first boot
- - unified update procedure for all T20/T30
- - limit journal size
- - nv-binaries: update to L4T R16.3
- - added packages: gstreamer deinterlacer, scrot
- - lxterminal, florence: fix garbled titlebar
-
-- sources git.toradex.com tag T30_LinuxImageV2.0Beta2_20130626
-
-Known Issues:
-- If a a monitor is connected to DVI, the kernel sometime hangs when the
- display controller DC1 is initialised. -> reboot required.
-- LVDS aka TFTLCD resolution hard-coded in kernel to VESA VGA resolution,
- comments with timings for other resolutions provided
-- lxappearance is segfaulting upon start
-- connecting an analogue mic to the on module codec resets the codec, so that
- neither headphone out nor mic in works anymore. Workaround: Have mic
- connected before boot or change the output source between DAC/LineIn
+************************************************
+Release Notes: Linux Image V2.x for Colibri T30
+************************************************
+
+Contents:
+- U-Boot 2011.06 boot loader
+- Linux 3.1.10 kernel, based on NVIDIA's Linux for Tegra (L4T) release 16-r3
+- OpenEmbedded oe-core 2012.10 based root file system, using LXDE desktop environment
+
+Licensing:
+- proprietary multimedia codecs included for evaluation purpose only
+- customer required to obtain proper re-distribution license
+
+********************************************************************************
+Linux Image V2.0 Beta 3 (August 20, 2013)
+This updates u-boot and kernel to cope with the increased eMMC and changed T30
+CPU SKU on Colibri T30
+- U-Boot:
+ - eMMC and RAM size / offset detection
+ - rename shell prompt to Colibri T30
+- Linux kernel:
+ - workaround limited CPU clock
+ - provision for the Analogue Camera Module
+ - v4l kernel drivers configured as kernel modules
+- rootfs / oe-core:
+ - update to latest git revision for kernel and u-boot
+ - image added v4l-utils
+ - removed warning output from commandline tegrastats
+
+- sources git.toradex.com tag T30_LinuxImageV2.0Beta3_20130820
+
+Known Issues:
+- If a a monitor is connected to DVI, the kernel sometime hangs when the
+ display controller DC1 is initialised. -> reboot required.
+- LVDS aka TFTLCD resolution hard-coded in kernel to VESA VGA resolution,
+ comments with timings for other resolutions provided
+- lxappearance is segfaulting upon start
+- connecting an analogue mic to the on module codec resets the codec, so that
+ neither headphone out nor mic in works anymore. Workaround: Have mic
+ connected before boot or change the output source between DAC/LineIn
- certain low-speed USB devices might not get detected
- on first boot the resizing process adversely affects system performance for
- the first few minutes until completed
-
-********************************************************************************
-Linux Image V2.0 Beta 1 (March 28, 2013)
-- U-Boot:
- - no changes
-- Linux kernel:
- - fbcon: logo: allow easy integration of a custom Linux boot logo
-- rootfs / oe-core:
- - use newer Linux kernel
- - use latest GPIOConfig, fixed SODIMM numbers
- - use a unified recipe for the Linux kernel
- - UBOOT_MACHINE variable definition moved to machine .conf file
- - add setxkbmap package
- - add florence package, virtual keyboard application
- - burnflash: fix race condition in genext3fs.sh and use -F option for mount
- - xorg framebuffer depth 16bit
- - use new Toradex CI
-
-- sources git.toradex.com tag T30_LinuxImageV2.0Beta1_20130314
-
-Known Issues:
-- If a a monitor is connected to DVI, the kernel sometime hangs when the
- display controller DC1 is initialised. -> reboot required.
-- LVDS aka TFTLCD resolution hard-coded in kernel to VESA VGA resolution,
- comments with timings for other resolutions provided
-- some windows have garbled titlebar, e.g. lxterminal
-- lxappearance is segfaulting upon start
-- connecting an analog mic to the on module codec resets the codec, so that
- neither headphone out nor mic in works anymore. Workaround: Have mic
- connected before boot or change the output source between DAC/LineIn
-
-
-********************************************************************************
-Linux Image V2.0 Alpha 1 (January 22, 2013)
-- U-Boot:
- - moved to proper machine type
-- Linux kernel:
- - added one wire platform data (conditional, CONFIG_W1_MASTER_TEGRA must be enabled)
- - fix USB hang on device insertion
- - added correct spidev platform data (/dev/spidev0.0)
- - PWM B, PWM C, PWM D now accessible from userspace, /sys/class/leds/
- - refined pin muxing
- - added thermal throttling, i.e. CPU freq. is reduced when CPU gets hot
- - updated audio codec driver, audio input now working
- - GPIO keys implementation
- - LP1 suspend support
- - moved to proper machine type
- - fix PMIC regulator platform data
-- oe-core:
- - use latest u-boot and Linux kernel
- - use latest GPIOConfig, fixes issues with tristated pins and GPIO with num >222
-
-- sources git.toradex.com tag T30_LinuxImageV2.0Alpha1_20130122
-
-Known Issues:
-- We are in an early Alpha state, not all functions are tested.
-- If a a monitor is connected to DVI, the kernel sometime hangs when the
- display controller DC1 is initialised. -> reboot required.
-- LVDS aka TFTLCD resolution hard-coded in kernel to VESA VGA resolution,
- comments with timings for other resolutions provided
-- some windows have garbled titlebar, e.g. lxterminal
-- lxappearance is segfaulting upon start
-- issues with the genext3.sh scripts: if your language settings expect
- something different to 'y' to a question, the script failes.
- The rootfs is empty resulting in a kernel panic during boot.
- Workaround: edit line 38 of bin/genext3.sh as follows:
- old: echo y | mkfs.ext3 $@ -L arm
- new: mkfs.ext3 -F -L arm $@
-
-********************************************************************************
-Linux Image V2.0 Alpha 0 (December 27, 2012)
-(ported form the Linux Image V2.0 Beta1 for Colibri T20)
-- U-Boot:
- - first release
-- Linux kernel:
- - first release
-- oe-core:
- - first release
-- sources git.toradex.com tag T30_LinuxImageV2.0Alpha0_20121227
-
-Known Issues:
-- We are in an early Alpha state, not all functions are tested.
-- If a a monitor is connected to DVI, the kernel sometime hangs when the
- display controller DC1 is initialised. -> reboot required.
-- When no device was attached to the USB host port during boot, the
- system crashes when one is attached when the system is up.
-- LVDS aka TFTLCD resolution hard-coded in kernel to VESA VGA resolution,
- comments with timings for other resolutions provided
-- some windows have garbled titlebar, e.g. lxterminal
-- lxappearance is segfaulting upon start
-
-********************************************************************************
-Notes:
-- 115200 baud serial debug console on UARTA aka FFUART (lower X25 on EvalBoards, X13 on Iris) without any handshake
-- user account: root with empty password
-- ext3 root file system
-- opkg package manager
-- HDMI: not all pixel clock frequencies allow for HDMI audio
-- CRT: the T30 internal video DAC output is unsupported by NVIDIA's L4T Linux SW stack
-- Linux host used for recovery mode flashing requires proper 32-bit execution environment (e.g. install ia32-libs on 64-bit Ubuntu)
-
-Working on latest image:
-- U-Boot boot loader
- - environment storage in eMMC
- - Ethernet
+ the first few minutes until completed
+
+********************************************************************************
+Linux Image V2.0 Beta 2 (June 26, 2013)
+- U-Boot:
+ - integrate NVIDIA partition table parsing incl. Toradex Colibri configuration block
+ - increase CPU frequency at boot
+ - decrease boot delay
+ - fix overflow in HCD conversion
+- Linux kernel:
+ - allow easy integration of a custom Linux boot logo
+ - add TouchRev Fusion 10 aka CPT CLAA101NC05 display timings
+ - integrate TouchRev Fusion 7 and 10 multi-touch driver
+ - fix gpio-key pull-ups
+ - enable back key wake-up
+ - rename UARTs and PWM LEDs
+ - explicitly configure for 4-bit MMC/SD cards by default
+ - integrate MCP251x and SJA1000 CAN support
+ - fix Ethernet MAC address assignment after suspend
+ - hack to make newer SD cards work by adding a quirk for lack of 1.8v support
+ - export some GPIOs via /sys/class/gpio
+ - add comment about GMI_ADV_N usage
+ - remove spurious tegra_aes_device
+ - video4linux adv7180 and max9526 integration
+ - set board local critical temperature to 95°C
+ - hack to avoid 24 Hz mode in X resulting in no display at all
+- rootfs / oe-core:
+ - update to latest git revision for kernel and u-boot
+ - extend rootfs partition on eMMC to its full partition size on first boot
+ - unified update procedure for all T20/T30
+ - limit journal size
+ - nv-binaries: update to L4T R16.3
+ - added packages: gstreamer deinterlacer, scrot
+ - lxterminal, florence: fix garbled titlebar
+
+- sources git.toradex.com tag T30_LinuxImageV2.0Beta2_20130626
+
+Known Issues:
+- If a a monitor is connected to DVI, the kernel sometime hangs when the
+ display controller DC1 is initialised. -> reboot required.
+- LVDS aka TFTLCD resolution hard-coded in kernel to VESA VGA resolution,
+ comments with timings for other resolutions provided
+- lxappearance is segfaulting upon start
+- connecting an analogue mic to the on module codec resets the codec, so that
+ neither headphone out nor mic in works anymore. Workaround: Have mic
+ connected before boot or change the output source between DAC/LineIn
+- certain low-speed USB devices might not get detected
+- on first boot the resizing process adversely affects system performance for
+ the first few minutes until completed
+
+********************************************************************************
+Linux Image V2.0 Beta 1 (March 28, 2013)
+- U-Boot:
+ - no changes
+- Linux kernel:
+ - fbcon: logo: allow easy integration of a custom Linux boot logo
+- rootfs / oe-core:
+ - use newer Linux kernel
+ - use latest GPIOConfig, fixed SODIMM numbers
+ - use a unified recipe for the Linux kernel
+ - UBOOT_MACHINE variable definition moved to machine .conf file
+ - add setxkbmap package
+ - add florence package, virtual keyboard application
+ - burnflash: fix race condition in genext3fs.sh and use -F option for mount
+ - xorg framebuffer depth 16bit
+ - use new Toradex CI
+
+- sources git.toradex.com tag T30_LinuxImageV2.0Beta1_20130314
+
+Known Issues:
+- If a a monitor is connected to DVI, the kernel sometime hangs when the
+ display controller DC1 is initialised. -> reboot required.
+- LVDS aka TFTLCD resolution hard-coded in kernel to VESA VGA resolution,
+ comments with timings for other resolutions provided
+- some windows have garbled titlebar, e.g. lxterminal
+- lxappearance is segfaulting upon start
+- connecting an analog mic to the on module codec resets the codec, so that
+ neither headphone out nor mic in works anymore. Workaround: Have mic
+ connected before boot or change the output source between DAC/LineIn
+
+
+********************************************************************************
+Linux Image V2.0 Alpha 1 (January 22, 2013)
+- U-Boot:
+ - moved to proper machine type
+- Linux kernel:
+ - added one wire platform data (conditional, CONFIG_W1_MASTER_TEGRA must be enabled)
+ - fix USB hang on device insertion
+ - added correct spidev platform data (/dev/spidev0.0)
+ - PWM B, PWM C, PWM D now accessible from userspace, /sys/class/leds/
+ - refined pin muxing
+ - added thermal throttling, i.e. CPU freq. is reduced when CPU gets hot
+ - updated audio codec driver, audio input now working
+ - GPIO keys implementation
+ - LP1 suspend support
+ - moved to proper machine type
+ - fix PMIC regulator platform data
+- oe-core:
+ - use latest u-boot and Linux kernel
+ - use latest GPIOConfig, fixes issues with tristated pins and GPIO with num >222
+
+- sources git.toradex.com tag T30_LinuxImageV2.0Alpha1_20130122
+
+Known Issues:
+- We are in an early Alpha state, not all functions are tested.
+- If a a monitor is connected to DVI, the kernel sometime hangs when the
+ display controller DC1 is initialised. -> reboot required.
+- LVDS aka TFTLCD resolution hard-coded in kernel to VESA VGA resolution,
+ comments with timings for other resolutions provided
+- some windows have garbled titlebar, e.g. lxterminal
+- lxappearance is segfaulting upon start
+- issues with the genext3.sh scripts: if your language settings expect
+ something different to 'y' to a question, the script failes.
+ The rootfs is empty resulting in a kernel panic during boot.
+ Workaround: edit line 38 of bin/genext3.sh as follows:
+ old: echo y | mkfs.ext3 $@ -L arm
+ new: mkfs.ext3 -F -L arm $@
+
+********************************************************************************
+Linux Image V2.0 Alpha 0 (December 27, 2012)
+(ported form the Linux Image V2.0 Beta1 for Colibri T20)
+- U-Boot:
+ - first release
+- Linux kernel:
+ - first release
+- oe-core:
+ - first release
+- sources git.toradex.com tag T30_LinuxImageV2.0Alpha0_20121227
+
+Known Issues:
+- We are in an early Alpha state, not all functions are tested.
+- If a a monitor is connected to DVI, the kernel sometime hangs when the
+ display controller DC1 is initialised. -> reboot required.
+- When no device was attached to the USB host port during boot, the
+ system crashes when one is attached when the system is up.
+- LVDS aka TFTLCD resolution hard-coded in kernel to VESA VGA resolution,
+ comments with timings for other resolutions provided
+- some windows have garbled titlebar, e.g. lxterminal
+- lxappearance is segfaulting upon start
+
+********************************************************************************
+Notes:
+- 115200 baud serial debug console on UARTA aka FFUART (lower X25 on EvalBoards, X13 on Iris) without any handshake
+- user account: root with empty password
+- ext3 root file system
+- opkg package manager
+- HDMI: not all pixel clock frequencies allow for HDMI audio
+- CRT: the T30 internal video DAC output is unsupported by NVIDIA's L4T Linux SW stack
+- Linux host used for recovery mode flashing requires proper 32-bit execution environment and awk (e.g. install ia32-libs on 64-bit Ubuntu)
+
+Working on latest image:
+- U-Boot boot loader
+ - environment storage in eMMC
+ - Ethernet
- MMC/SD cards (only GPT partitioned)
- - eMMC flash with NVIDIA partition table parsing
- - serial console debug UARTA
- - Toradex Colibri configuration block handling
- - USB storage as host
-- Linux kernel
- - GPIOlib /sys/class/gpio
- - temperature sensor /sys/bus/i2c/devices/4-004c
- - RTC (Tegra internal, PMIC and board level I2C RTC)
- - Ethernet eth0
- - serial console debug UARTA
- - high speed serial UARTB and UARTD
- - I2C via /dev/i2c-X
- - MMC/SD card, optional 8-bit SDHCI
- - PWM LEDs /sys/class/leds/
- - HDMI SPDIF audio
- - analog audio capture, playback and touch
- - audio noise is high, workaround is to set headphone volume to maximum and use the DAC volume
- - touch has some jitter
- - SPI via /dev/spidev0.0
- - GMI with multiplexed nPWE and RDnWR
- - framebuffer console
- - custom Ethernet MAC Address
- - serial number and board revision
- - USB host port
- - USB audio driver
- - USB webcam
- - USB raw HID device /dev/hidrawX
- - USB device Ethernet RNDIS, provided by Android gadget
- - automatic USB device/host detection aka OTG support
- - suspend LP1
- - DVFS power management
- - optional parallel camera interface
-- Linux user-space
- - graphics (LVDS-1 aka TFTLCD and HDMI-1 aka DVI-D)
- - tegrastats
- - Firefox
- - Gstreamer video encode and playback, dual full HD video decode
- - GPIO config tool
- - LXDE
- - tegrastats-gtk, CPU information visible in graphical environment
-
-Not working or not tested:
-- U-Boot boot loader
- - U-Boot USB keyboard
+ - eMMC flash with NVIDIA partition table parsing
+ - serial console debug UARTA
+ - Toradex Colibri configuration block handling
+ - USB storage as host
+- Linux kernel
+ - GPIOlib /sys/class/gpio
+ - temperature sensor /sys/bus/i2c/devices/4-004c
+ - RTC (Tegra internal, PMIC and board level I2C RTC)
+ - Ethernet eth0
+ - serial console debug UARTA
+ - high speed serial UARTB and UARTD
+ - I2C via /dev/i2c-X
+ - MMC/SD card, optional 8-bit SDHCI
+ - PWM LEDs /sys/class/leds/
+ - HDMI SPDIF audio
+ - analog audio capture, playback and touch
+ - audio noise is high, workaround is to set headphone volume to maximum and use the DAC volume
+ - touch has some jitter
+ - SPI via /dev/spidev0.0
+ - GMI with multiplexed nPWE and RDnWR
+ - framebuffer console
+ - custom Ethernet MAC Address
+ - serial number and board revision
+ - USB host port
+ - USB audio driver
+ - USB webcam
+ - USB raw HID device /dev/hidrawX
+ - USB device Ethernet RNDIS, provided by Android gadget
+ - automatic USB device/host detection aka OTG support
+ - suspend LP1
+ - DVFS power management
+ - optional parallel camera interface
+- Linux user-space
+ - graphics (LVDS-1 aka TFTLCD and HDMI-1 aka DVI-D)
+ - tegrastats
+ - Firefox
+ - Gstreamer video encode and playback, dual full HD video decode
+ - GPIO config tool
+ - LXDE
+ - tegrastats-gtk, CPU information visible in graphical environment
+
+Not working or not tested:
+- U-Boot boot loader
+ - U-Boot USB keyboard
- TFTLCD framebuffer support
-- Linux kernel
- - analog input AD0 .. AD3 not implemented
- - watchdog
- - IrDA
- - RS-422/485
-- Linux user-space
- - Adobe Flash not provided by L4T (and probably never will)
- - opkg package feeds don't seem to be usable
-
-***********************************************
-eMMC Boot: Colibri T30 V1.1b and V1.1c (Sample)
-***********************************************
-
-Initial Preparation:
-- download and extract T30_LinuxImageVx.yz.tar.bz2 package with root permissions
-
-Flash eMMC:
-- EvalBoard V3.1a
- - connect USB B (X29) or USB micro A/B (X30) to development workstation using regular or micro USB cable
- - the jumper JP2 must be open
- - press and hold recovery mode switch (SW9) during power up
-- Iris V1.1a
- - connect USB micro A/B (X12) to development workstation using regular micro USB cable
- - short pin 1-2 of JP1 on Iris for RECOVERY
-(other carrier boards see http://developer.toradex.com/knowledge-base/colibri-recovery-mode)
-- make sure that the carrier board supports USB high speed
- - Iris & EvalBoard V3.1a OK, for other carrier boards see http://developer.toradex.com/knowledge-base/usb-2.0-high-speed-%28480mbps%29 )
-- apply power or reset
-- run update.sh script
-
-Boot from eMMC:
-- EvalBoard V3.1a
- - do no longer press SW9
-- Iris V1.1a
- - do no longer short any pins of JP1
-- power cycle
-- upon first boot post-install scripts are run which takes around 2 minutes, please be patient
-
-Toradex, June 27, 2013
+- Linux kernel
+ - analog input AD0 .. AD3 not implemented
+ - watchdog
+ - IrDA
+ - RS-422/485
+- Linux user-space
+ - Adobe Flash not provided by L4T (and probably never will)
+ - opkg package feeds don't seem to be usable
+
+*********************************************************
+eMMC Boot: Colibri T30 V1.1b, V1.1c and V1.1d (Sample)
+*********************************************************
+
+Initial Preparation:
+- download and extract T30_LinuxImageVx.yz.tar.bz2 package with root permissions
+
+Flash eMMC:
+- EvalBoard V3.1a
+ - connect USB B (X29) or USB micro A/B (X30) to development workstation using regular or micro USB cable
+ - the jumper JP2 must be open
+ - press and hold recovery mode switch (SW9) during power up
+- Iris V1.1a
+ - connect USB micro A/B (X12) to development workstation using regular micro USB cable
+ - short pin 1-2 of JP1 on Iris for RECOVERY
+(other carrier boards see http://developer.toradex.com/knowledge-base/colibri-recovery-mode)
+- make sure that the carrier board supports USB high speed
+ - Iris & EvalBoard V3.1a OK, for other carrier boards see http://developer.toradex.com/knowledge-base/usb-2.0-high-speed-%28480mbps%29 )
+- apply power or reset
+- run update.sh script
+
+Boot from eMMC:
+- EvalBoard V3.1a
+ - do no longer press SW9
+- Iris V1.1a
+ - do no longer short any pins of JP1
+- power cycle
+- upon first boot post-install scripts are run which takes around 2 minutes, please be patient
+
+Toradex, August 20, 2013