From 72daaf0f4b4921492965628ec34c5a13010af4c0 Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Thu, 13 Nov 2014 07:51:10 +0100 Subject: Apalis/Colibri iMX6/T20/T30/VF50/VF61: Update release notes --- release-notes/Apalis_iMX6_LinuxReleaseNotesV2.x.txt | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) (limited to 'release-notes/Apalis_iMX6_LinuxReleaseNotesV2.x.txt') diff --git a/release-notes/Apalis_iMX6_LinuxReleaseNotesV2.x.txt b/release-notes/Apalis_iMX6_LinuxReleaseNotesV2.x.txt index 2d029a9..61bffca 100644 --- a/release-notes/Apalis_iMX6_LinuxReleaseNotesV2.x.txt +++ b/release-notes/Apalis_iMX6_LinuxReleaseNotesV2.x.txt @@ -6,8 +6,8 @@ Contents: - U-Boot 2014.04 boot loader - Linux 3.10.17 kernel, based on Freescale's BSP release imx_3.10.17_1.0.1_ga and patches from Boundary Devices -- Yocto/OpenEmbedded daisy/2014.06 based root file system, using LXDE desktop - environment +- Angstrom/OpenEmbedded/Yocto 2014.06/daisy/1.6 based root file system, using + LXDE desktop environment ==> Flashing instructions can be found at the very bottom of this release notes @@ -64,6 +64,8 @@ Known Issues: - backlight PWM BKL_PWM (hard-coded to 0 in U-Boot > full brightness on an EDT display). - X uses only the fb0 device +- due to the flash_eth.img update script currently being broken please use the + SD card flashing method (e.g. flash_mmc.img) for now ******************************************************************************** Linux Image V2.3 Beta 1 (August 4, 2014) @@ -295,9 +297,6 @@ If the boot loader on the module got corrupted this recovers it by loading U-Boo - have the module in recovery mode and load U-Boot over USB to the module's RAM: - lsusb should show a 15a2:0054 Freescale Semiconductor, Inc. device if the module is in recovery mode - - if you have a 32-bit Linux host, replace imx_flash/imx_usb with its 32-bit - version imx_flash/imx_usb.m32 i.e. sudo mv imx_flash/imx_usb - imx_flash/imx_usb.m64; sudo ln -s imx_usb.m32 imx_flash/imx_usb - run ./update.sh -d - stop at the U-Boot prompt and begin the update as stated above -- cgit v1.2.3