summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--recipes-bsp/imx-mkimage/files/0001-add-board-support-for-DCD-memory-timings.patch47
-rw-r--r--recipes-bsp/imx-mkimage/files/0002-add-memory-timings-for-Apalis-iMX8.patch1023
-rw-r--r--recipes-bsp/imx-mkimage/imx-boot_%.bbappend11
3 files changed, 1079 insertions, 2 deletions
diff --git a/recipes-bsp/imx-mkimage/files/0001-add-board-support-for-DCD-memory-timings.patch b/recipes-bsp/imx-mkimage/files/0001-add-board-support-for-DCD-memory-timings.patch
new file mode 100644
index 0000000..442cd0d
--- /dev/null
+++ b/recipes-bsp/imx-mkimage/files/0001-add-board-support-for-DCD-memory-timings.patch
@@ -0,0 +1,47 @@
+From 2457fef0de68d8eef8ec9a76a5daa56e71db1aff Mon Sep 17 00:00:00 2001
+From: Stefan Agner <stefan.agner@toradex.com>
+Date: Thu, 18 Jan 2018 10:09:14 +0100
+Subject: [PATCH] add board support for DCD memory timings
+
+Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
+Forward port to imx_4.9.88_imx8qxp_beta2
+Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
+---
+ iMX8QM/soc.mak | 22 ++++++++++++++++------
+ 1 file changed, 16 insertions(+), 6 deletions(-)
+
+diff --git a/iMX8QM/soc.mak b/iMX8QM/soc.mak
+index c348f07..703946d 100755
+--- a/iMX8QM/soc.mak
++++ b/iMX8QM/soc.mak
+@@ -1,11 +1,21 @@
+ MKIMG = ../mkimage_imx8
+-DCD_800_CFG_SRC = imx8qm_dcd_800MHz.cfg
+-DCD_1200_CFG_SRC = imx8qm_dcd_1.2GHz.cfg
+-DCD_CFG_SRC = imx8qm_dcd_1.6GHz.cfg
++ifeq ($(DCD_BOARD),)
++ DCD_800_CFG_SRC = imx8qm_dcd_800MHz.cfg
++ DCD_1200_CFG_SRC = imx8qm_dcd_1.2GHz.cfg
++ DCD_CFG_SRC = imx8qm_dcd_1.6GHz.cfg
++
++ DCD_800_CFG = imx8qm_dcd_800.cfg.tmp
++ DCD_1200_CFG = imx8qm_dcd_1200.cfg.tmp
++ DCD_CFG = imx8qm_dcd.cfg.tmp
++else
++ DCD_800_CFG_SRC = imx8qm_$(DCD_BOARD)_dcd_800MHz.cfg
++ DCD_1200_CFG_SRC = $(DCD_CFG_SRC)
++ DCD_CFG_SRC = imx8qm_$(DCD_BOARD)_dcd_1.6GHz.cfg
+
+-DCD_800_CFG = imx8qm_dcd_800.cfg.tmp
+-DCD_1200_CFG = imx8qm_dcd_1200.cfg.tmp
+-DCD_CFG = imx8qm_dcd.cfg.tmp
++ DCD_800_CFG = imx8qm_$(DCD_BOARD)_dcd_800.cfg.tmp
++ DCD_1200_CFG = imx8qm_$(DCD_BOARD)_dcd_1200.cfg.tmp
++ DCD_CFG = imx8qm_$(DCD_BOARD)_dcd.cfg.tmp
++endif
+
+ CC ?= gcc
+ INCLUDE = ./lib
+--
+2.13.6
+
diff --git a/recipes-bsp/imx-mkimage/files/0002-add-memory-timings-for-Apalis-iMX8.patch b/recipes-bsp/imx-mkimage/files/0002-add-memory-timings-for-Apalis-iMX8.patch
new file mode 100644
index 0000000..b422fd3
--- /dev/null
+++ b/recipes-bsp/imx-mkimage/files/0002-add-memory-timings-for-Apalis-iMX8.patch
@@ -0,0 +1,1023 @@
+From 5fbcedaf8ade13bddd9aca7baf7a7132a63096e7 Mon Sep 17 00:00:00 2001
+From: Stefan Agner <stefan.agner@toradex.com>
+Date: Thu, 18 Jan 2018 10:10:11 +0100
+Subject: [PATCH 2/2] add memory timings for Apalis iMX8
+
+This adds 800MHz and 1.6GHz memory timings for Apalis iMX8, copied
+from the imx-scfw-porting-kit git tree.
+
+Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
+---
+ iMX8QM/imx8qm_apalis-imx8_dcd_1.6GHz.cfg | 469 +++++++++++++++++++++++++++
+ iMX8QM/imx8qm_apalis-imx8_dcd_800MHz.cfg | 523 +++++++++++++++++++++++++++++++
+ 2 files changed, 992 insertions(+)
+ create mode 100755 iMX8QM/imx8qm_apalis-imx8_dcd_1.6GHz.cfg
+ create mode 100755 iMX8QM/imx8qm_apalis-imx8_dcd_800MHz.cfg
+
+diff --git a/iMX8QM/imx8qm_apalis-imx8_dcd_1.6GHz.cfg b/iMX8QM/imx8qm_apalis-imx8_dcd_1.6GHz.cfg
+new file mode 100755
+index 0000000..6deb9e0
+--- /dev/null
++++ b/iMX8QM/imx8qm_apalis-imx8_dcd_1.6GHz.cfg
+@@ -0,0 +1,469 @@
++#define __ASSEMBLY__
++
++#include <ddrc_mem_map.h>
++#include <ddr_phy_mem_map.h>
++
++/*
++ * Device Configuration Data (DCD)
++ *
++ * Each entry must have the format:
++ * Addr-type Address Value
++ *
++ * where:
++ * Addr-type register length (1,2 or 4 bytes)
++ * Address absolute address of the register
++ * value value to be stored in the register
++ */
++
++#ifndef SCFW_DCD
++/* For 1600MHz DDR, DRC 800MHz operation */
++DATA 4 0xff148000 0x00000885 /* DRC0 bringup */
++DATA 4 0xff1a0000 0x00000885 /* DRC1 bringup */
++#else
++/* Set the DRC rate to 800MHz, the PHY PLL will double this for the DRAM rate. */
++uint32_t rate2 = SC_800MHZ;
++pm_set_clock_rate(SC_PT, SC_R_DRC_0, SC_PM_CLK_MISC0, &rate2);
++pm_set_clock_rate(SC_PT, SC_R_DRC_1, SC_PM_CLK_MISC0, &rate2);
++#endif
++
++DATA 4 0x41a40208 0x1
++DATA 4 0x41d00208 0x1
++DATA 4 0x41a40040 0xb
++DATA 4 0x41d00040 0xb
++DATA 4 0x41a40204 0x1
++DATA 4 0x41d00204 0x1
++/* DRAM 0 controller configuration begin */
++DATA 4 DDRC_MSTR_0 0xC3080020 // Set LPDDR4, BL = 16 and active ranks
++DATA 4 DDRC_DERATEEN_0 0x00000213 // derate enable, derate values, byte to read MRR data
++DATA 4 DDRC_DERATEINT_0 0x0186A000 // derate MR4 interval read
++DATA 4 DDRC_RFSHTMG_0 0x006100E0 // tREFI, tRFC
++DATA 4 DDRC_INIT0_0 0x4003061C // pre_cke = 2ms, post_cke = 2us
++DATA 4 DDRC_INIT1_0 0x009E0000 // dram_rstn = 200us
++DATA 4 DDRC_INIT3_0 0x0054002D // MR1, MR2
++DATA 4 DDRC_INIT4_0 0x00F10000 // MR3, MR13
++DATA 4 DDRC_RANKCTL_0 0x0000066F // diff_rank_wr_gap, diff_rank_rd_gap, max_rank_rd
++DATA 4 DDRC_DRAMTMG0_0 0x1A201B22 // wr2pr, tFAW, tRASmax, tRASmin
++DATA 4 DDRC_DRAMTMG1_0 0x00060633 // tXP, rd2pre, tRC
++DATA 4 DDRC_DRAMTMG2_0 0x07101817 // WL, RL, rd2wr, wr2rd
++DATA 4 DDRC_DRAMTMG3_0 0x00C0C000 // tmrw, tmrd, tmod
++DATA 4 DDRC_DRAMTMG4_0 0x0F04080F // trcd, tccd, trrd, trp
++DATA 4 DDRC_DRAMTMG5_0 0x02040C0C // tCKCKEH, tCKCKEL, tckesr, tcke
++DATA 4 DDRC_DRAMTMG6_0 0x02020007 // tckdpde, tckdpdx, tckcsx
++DATA 4 DDRC_DRAMTMG7_0 0x00000401 // tckpde, tckpdx
++DATA 4 DDRC_DRAMTMG12_0 0x00020610 // tCMDCKE, tCKEHCMD
++DATA 4 DDRC_DRAMTMG13_0 0x0C100002 // tODTLoff, tCCDMW, tPPD
++DATA 4 DDRC_DRAMTMG14_0 0x000000E6 // txsr
++DATA 4 DDRC_ZQCTL0_0 0x03200018 // tZQCAL, tZQLAT
++DATA 4 DDRC_ZQCTL1_0 0x028061A8 // tZQReset, tzq_short_interval
++DATA 4 DDRC_DFITMG0_0 0x049E820C // dfi_t_ctrl_delay, dfi_t_rddata_en, dfi_tphy_wrdata, dfi_tphy_wrlat
++DATA 4 DDRC_DFITMG1_0 0x00070303 // dfi_t_wrdata_delay, dfi_t_dram_clk_disable, dfi_t_dram_clk_enable
++DATA 4 DDRC_DFITMG2_0 0x00001C0A // dfi_tphy_rdcslat, dfi_tphy_wrcslat
++DATA 4 DDRC_DFIMISC_0 0x00000005 // dfi_data_cs_polarity
++DATA 4 DDRC_DFIUPD0_0 0x00400003 // Disable the automatic dfi_ctrlupd_req generation
++DATA 4 DDRC_DFIUPD1_0 0x008000A0 // dfi_ctrlupd_req generation interval generation (min and max)
++DATA 4 DDRC_DFIUPD2_0 0x80000000 // dfi_phyupd_en
++DATA 4 DDRC_ADDRMAP0_0 0x00000016 // addrmap_cs_bit0
++DATA 4 DDRC_ADDRMAP3_0 0x00000000 // addrmap_col_b9, addrmap_col_b8, addrmap_col_b7, addrmap_col_b6
++DATA 4 DDRC_ADDRMAP4_0 0x00001F1F // addrmap_col_b10 and addrmap_col_b11 set to de-activated
++DATA 4 DDRC_ADDRMAP1_0 0x00080808 // addrmap_bank_b2, addrmap_bank_b1, addrmap_bank_b0
++DATA 4 DDRC_ADDRMAP5_0 0x07070707 // addrmap_row_b11, addrmap_row_b10_b2, addrmap_row_b1, addrmap_row_b0
++DATA 4 DDRC_ADDRMAP6_0 0x0F070707 // addrmap_row_b15, addrmap_row_b14, addrmap_row_b13, addrmap_row_b12
++DATA 4 DDRC_DBICTL_0 0x00000007 // rd_dbi_en=wr_dbi_en=dm_en=1
++DATA 4 DDRC_ODTMAP_0 0x00002211 // rank[3:0]_wr_odt, rank[3:0]_wr_odt
++DATA 4 DDRC_PCTRL_0_0 0x00000001 // Enable port 0
++DATA 4 DDRC_DFITMG0_SHADOW_0 0x00808000
++
++/* DRAM 1 controller initialization */
++DATA 4 DDRC_MSTR_1 0xC3080020 // Set LPDDR4, BL = 16 and active ranks
++DATA 4 DDRC_DERATEEN_1 0x00000203 // derate enable, derate values, byte to read MRR data
++DATA 4 DDRC_DERATEINT_1 0x0186A000 // derate MR4 interval read
++DATA 4 DDRC_RFSHTMG_1 0x006100E0 // tREFI, tRFC
++DATA 4 DDRC_INIT0_1 0x4003061C // pre_cke = 2ms, post_cke = 2us
++DATA 4 DDRC_INIT1_1 0x009E0000 // dram_rstn = 200us
++DATA 4 DDRC_INIT3_1 0x0054002D // MR1, MR2
++DATA 4 DDRC_INIT4_1 0x00F10000 // MR3, MR13
++DATA 4 DDRC_RANKCTL_1 0x0000066F // diff_rank_wr_gap, diff_rank_rd_gap, max_rank_rd
++DATA 4 DDRC_DRAMTMG0_1 0x1A201B22 // wr2pr, tFAW, tRASmax, tRASmin
++DATA 4 DDRC_DRAMTMG1_1 0x00060633 // tXP, rd2pre, tRC
++DATA 4 DDRC_DRAMTMG2_1 0x07101817 // WL, RL, rd2wr, wr2rd
++DATA 4 DDRC_DRAMTMG3_1 0x00C0C000 // tmrw, tmrd, tmod
++DATA 4 DDRC_DRAMTMG4_1 0x0F04080F // trcd, tccd, trrd, trp
++DATA 4 DDRC_DRAMTMG5_1 0x02040C0C // tCKCKEH, tCKCKEL, tckesr, tcke
++DATA 4 DDRC_DRAMTMG6_1 0x02020007 // tckdpde, tckdpdx, tckcsx
++DATA 4 DDRC_DRAMTMG7_1 0x00000401 // tckpde, tckpdx
++DATA 4 DDRC_DRAMTMG12_1 0x00020610 // tCMDCKE, tCKEHCMD
++DATA 4 DDRC_DRAMTMG13_1 0x0C100002 // tODTLoff, tCCDMW, tPPD
++DATA 4 DDRC_DRAMTMG14_1 0x000000E6 // txsr
++DATA 4 DDRC_ZQCTL0_1 0x03200018 // tZQCAL, tZQLAT
++DATA 4 DDRC_ZQCTL1_1 0x028061A8 // tZQReset, tzq_short_interval
++DATA 4 DDRC_DFITMG0_1 0x049E820C // dfi_t_ctrl_delay, dfi_t_rddata_en, dfi_tphy_wrdata, dfi_tphy_wrlat
++DATA 4 DDRC_DFITMG1_1 0x00070303 // dfi_t_wrdata_delay, dfi_t_dram_clk_disable, dfi_t_dram_clk_enable
++DATA 4 DDRC_DFITMG2_1 0x00001C0A // dfi_tphy_rdcslat, dfi_tphy_wrcslat
++DATA 4 DDRC_DFIMISC_1 0x00000005 // dfi_data_cs_polarity
++DATA 4 DDRC_DFIUPD0_1 0x00400003 // Disable the automatic dfi_ctrlupd_req generation
++DATA 4 DDRC_DFIUPD1_1 0x008000A0 // dfi_ctrlupd_req generation interval generation (min and max)
++DATA 4 DDRC_DFIUPD2_1 0x80000000 // dfi_phyupd_en
++DATA 4 DDRC_ADDRMAP0_1 0x00000016 // addrmap_cs_bit0
++DATA 4 DDRC_ADDRMAP3_1 0x00000000 // addrmap_col_b9, addrmap_col_b8, addrmap_col_b7, addrmap_col_b6
++DATA 4 DDRC_ADDRMAP4_1 0x00001F1F // addrmap_col_b10 and addrmap_col_b11 set to de-activated
++DATA 4 DDRC_ADDRMAP1_1 0x00080808 // addrmap_bank_b2, addrmap_bank_b1, addrmap_bank_b0
++DATA 4 DDRC_ADDRMAP5_1 0x07070707 // addrmap_row_b11, addrmap_row_b10_b2, addrmap_row_b1, addrmap_row_b0
++DATA 4 DDRC_ADDRMAP6_1 0x0F070707 // addrmap_row_b15, addrmap_row_b14, addrmap_row_b13, addrmap_row_b12
++DATA 4 DDRC_DBICTL_1 0x00000007 // rd_dbi_en=wr_dbi_en=dm_en=1
++DATA 4 DDRC_ODTMAP_1 0x00002211 // rank[3:0]_wr_odt, rank[3:0]_wr_odt
++DATA 4 DDRC_PCTRL_0_1 0x00000001 // Enable port 0
++DATA 4 DDRC_DFITMG0_SHADOW_1 0x00808000
++
++DATA 4 0x41a40208 0x1
++DATA 4 0x41d00208 0x1
++DATA 4 0x41a40040 0xf
++DATA 4 0x41d00040 0xf
++DATA 4 0x41a40204 0x1
++DATA 4 0x41d00204 0x1
++//-------------------------------------------
++// Configure registers for PHY initialization
++//--------------------------------------------
++// Set-up DRAM Configuration Register
++DATA 4 DDR_PHY_DCR_0 0x0000040D // LPDDR4 selection with 8 bank
++// Set-up byte and bit swapping registers
++DATA 4 DDR_PHY_PGCR8_0 0x000F0009
++DATA 4 DDR_PHY_DX0DQMAP0_0 0x00070142 // DQ bit 0/1/2/3/4 remapping
++DATA 4 DDR_PHY_DX0DQMAP1_0 0x00008653 // DQ bit 5/6/7 and DM remapping
++DATA 4 DDR_PHY_DX1DQMAP0_0 0x00056210 // DQ bit 0/1/2/3/4 remapping
++DATA 4 DDR_PHY_DX1DQMAP1_0 0x00008473 // DQ bit 5/6/7 and DM remapping
++DATA 4 DDR_PHY_DX2DQMAP0_0 0x00065734 // DQ bit 0/1/2/3/4 remapping
++DATA 4 DDR_PHY_DX2DQMAP1_0 0x00008012 // DQ bit 5/6/7 and DM remapping
++DATA 4 DDR_PHY_DX3DQMAP0_0 0x00061037 // DQ bit 0/1/2/3/4 remapping
++DATA 4 DDR_PHY_DX3DQMAP1_0 0x00008452 // DQ bit 5/6/7 and DM remapping
++DATA 4 DDR_PHY_CATR0_0 0x00141032 // Only for LPDDR3 but used here to know how LPDDR4 bytes are connected to PHY
++DATA 4 DDR_PHY_CATR1_0 0x0013AAAA // Only for LPDDR3 but used here to know how LPDDR4 bytes are connected to PHY
++// Set-up PHY General Configuration Register
++SET_BIT 4 DDR_PHY_PGCR1_0 0x000A0000 // DISDIC=1 (no uMCTL2 commands can go to memory) and WDQSEXT=1
++DATA 4 DDR_PHY_PGCR0_0 0x87001E00 // Set ADCP=1 (Address Copy)
++DATA 4 DDR_PHY_PGCR2_0 0x00F0D879 // Set tREFPRD
++DATA 4 DDR_PHY_PGCR3_0 0x050A1080 // CKEN/CKNEN toggling and polarity
++// Set-up PHY Timing Register
++// PTR2 is untouched
++DATA 4 DDR_PHY_PTR0_0 0x64032010 // tPLLPD, tPLLGS, tPHYRST
++DATA 4 DDR_PHY_PTR1_0 0x4E201C20 // tPLLLOCK, tPLLRST
++// Set-up PLL Control Register
++DATA 4 DDR_PHY_PLLCR0_0 0x001C0000
++DATA 4 DDR_PHY_DX8SLbPLLCR0_0 0x001C0000
++// Set-up Impedance Control Register
++DATA 4 DDR_PHY_ZQCR_0 0x008A2C58 // Set ODT_MODE=0b10(LPDDR4 stype pullup)
++// ZPROG_DRAM_ODT and ZPROG_HOST_ODT
++DATA 4 DDR_PHY_ZQ0PR0_0 0x0001B9BB // Impedance control for CA bus
++DATA 4 DDR_PHY_ZQ1PR0_0 0x0001B9BB // Impedance control for DQ bus
++// Set-up PHY Initialization Register
++DATA 4 DDR_PHY_PIR_0 0x32
++// Launch initialization (set bit 0)
++DATA 4 DDR_PHY_PIR_0 0x33
++//-------------------------------------------
++// Configure registers for PHY initialization
++//-------------------------------=------------
++// Set-up DRAM 1 PHY Configuration Register
++DATA 4 DDR_PHY_DCR_1 0x0000040D // LPDDR4 selection with 8 bank
++// Set-up byte and bit swapping registers
++DATA 4 DDR_PHY_PGCR8_1 0x000F000A
++DATA 4 DDR_PHY_DX0DQMAP0_1 0x00021307 // DQ bit 0/1/2/3/4 remapping
++DATA 4 DDR_PHY_DX0DQMAP1_1 0x00008456 // DQ bit 5/6/7 and DM remapping
++DATA 4 DDR_PHY_DX1DQMAP0_1 0x00072510 // DQ bit 0/1/2/3/4 remapping
++DATA 4 DDR_PHY_DX1DQMAP1_1 0x00008436 // DQ bit 5/6/7 and DM remapping
++DATA 4 DDR_PHY_DX2DQMAP0_1 0x00056710 // DQ bit 0/1/2/3/4 remapping
++DATA 4 DDR_PHY_DX2DQMAP1_1 0x00008243 // DQ bit 5/6/7 and DM remapping
++DATA 4 DDR_PHY_DX3DQMAP0_1 0x00031602 // DQ bit 0/1/2/3/4 remapping
++DATA 4 DDR_PHY_DX3DQMAP1_1 0x00008547 // DQ bit 5/6/7 and DM remapping
++DATA 4 DDR_PHY_CATR0_1 0x00141032 // Only for LPDDR3 but used here to know how LPDDR4 bytes are connected to PHY
++DATA 4 DDR_PHY_CATR1_1 0x0103AAAA // Only for LPDDR3 but used here to know how LPDDR4 bytes are connected to PHY
++// Set-up PHY General Configuration Register
++SET_BIT 4 DDR_PHY_PGCR1_1 0x000A0000 // DISDIC=1 (no uMCTL2 commands can go to memory) and WDQSEXT=1
++DATA 4 DDR_PHY_PGCR0_1 0x87001E00 // Set ADCP=1 (Address Copy)
++DATA 4 DDR_PHY_PGCR2_1 0x00F0D879 // Set tREFPRD
++DATA 4 DDR_PHY_PGCR3_1 0x050A1080 // CKEN/CKNEN toggling and polarity
++// Set-up PHY Timing Register
++// PTR2 is untouched
++DATA 4 DDR_PHY_PTR0_1 0x64032010 // tPLLPD, tPLLGS, tPHYRST
++DATA 4 DDR_PHY_PTR1_1 0x4E201C20 // tPLLLOCK, tPLLRST
++// Set-up PLL Control Register
++DATA 4 DDR_PHY_PLLCR0_1 0x001C0000
++DATA 4 DDR_PHY_DX8SLbPLLCR0_1 0x001C0000
++// Set-up Impedance Control Register
++DATA 4 DDR_PHY_ZQCR_1 0x008A2C58 // Set ODT_MODE=0b10(LPDDR4 stype pullup)
++// ZPROG_DRAM_ODT and ZPROG_HOST_ODT
++DATA 4 DDR_PHY_ZQ0PR0_1 0x0001B9BB // Impedance control for CA bus
++DATA 4 DDR_PHY_ZQ1PR0_1 0x0001B9BB // Impedance control for DQ bus
++// Set-up PHY Initialization Register
++DATA 4 DDR_PHY_PIR_1 0x32
++// Launch initialization (set bit 0)
++DATA 4 DDR_PHY_PIR_1 0x33
++//-------------------------------------------
++// Configure registers for DRAM initialization
++//-------------------------------------------
++// Set-up Mode Register
++// MR0, MR3, MR4, MR5 MR6 are untouched
++DATA 4 DDR_PHY_MR1_0 0x54 // Set BL, WR-PRE, nWR, RPST
++DATA 4 DDR_PHY_MR2_0 0x2D // Set RL/WL
++DATA 4 DDR_PHY_MR3_0 0xF1 // Set drive strength
++
++DATA 4 DDR_PHY_MR11_0 0x54 // Set CA ODT and DQ ODT
++DATA 4 DDR_PHY_MR22_0 0x15 // Set ODTE-CS=1 (overrides ODT_CA for CS1 as CS not shared between ranks)
++/* LPDDR4 mode register writes for CA and DQ VREF settings */
++DATA 4 DDR_PHY_MR12_0 0x48
++DATA 4 DDR_PHY_MR14_0 0x48
++// Set-up DRAM Timing Parameters Register
++// DTPR6 is untouched
++DATA 4 DDR_PHY_DTPR0_0 0x1044220C // tRRD, tRAS, tRP, tRTP
++DATA 4 DDR_PHY_DTPR1_0 0x28400417 // tWLMRD, tFAW, tODTUP, tMRD
++DATA 4 DDR_PHY_DTPR2_0 0x006CA1CC // tRTW, tRTODT, tCMDCKE, tCKE, tVRCG, tXS
++DATA 4 DDR_PHY_DTPR3_0 0x01800602 // tODX, tCCD, tDLLK, tDQSCKmax, tDQSCK (FIXME double check tDLLK)
++DATA 4 DDR_PHY_DTPR4_0 0x01C02B0F // tRFC, tWLO, tXP
++DATA 4 DDR_PHY_DTPR5_0 0x21651D11 // tRC, tRCD, tWTR
++// Set-up PHY Timing Register
++DATA 4 DDR_PHY_PTR3_0 0x0030D400 // tDINIT0
++DATA 4 DDR_PHY_PTR4_0 0x00000C80 // tDINIT1
++DATA 4 DDR_PHY_PTR5_0 0x0004E200 // tDINIT2
++DATA 4 DDR_PHY_PTR6_0 0x03300640 // tDINIT4, tDINIT3
++// Set-up ODT Configuration Register
++// DDR ODT_CA signal is tied at boundary of DDR. Thus no need to drive it dynamically.
++DATA 4 DDR_PHY_RANKIDR_0 0x00000001 // Select rank 1 to write
++DATA 4 DDR_PHY_ODTCR_0 0x00000000 // ODT of rank1 disabled
++DATA 4 DDR_PHY_RANKIDR_0 0x00000000 // Select rank 0 to write
++DATA 4 DDR_PHY_ODTCR_0 0x00000000 // ODT of rank0 disabled
++// Set-up AC I/O Configuration Register
++// ACIOCR1-4 are untouched
++DATA 4 DDR_PHY_ACIOCR0_0 0x30070800 // PNUM2 (i.e.LPDDR4) selection [10:11] = 0x2
++DATA 4 DDR_PHY_ACIOCR5_0 0x09000000 // I/O mode = LPDDR4
++// Due to address copy set A[13] (=cke_B[0]) and A[15] (=cke_B[1]) outputs as always ON.
++DATA 4 DDR_PHY_ACIOCR1_0 0x44000000
++// Set-up VREF Training Control Registers
++DATA 4 DDR_PHY_VTCR0_0 0xF0032008 // CK1, CK0, DRAM VREF set to same as MR12
++DATA 4 DDR_PHY_VTCR1_0 0x07F001AF // HVIO=1, SHREN=1, SHRNK=0
++// Set-up DATX8 General Configuration Registers
++// DXnGCR0-4 are untouched
++SET_BIT 4 DDR_PHY_PGCR5_0 0x4
++DATA 4 DDR_PHY_PGCR6_0 0x00033200 // Enable CSN Bit Delay VT Compensation (AC already enabled by default) + drift limit
++// Set-up DATX8 General Configuration Registers
++DATA 4 DDR_PHY_DX0GCR5_0 0x09092020 // Set DXREFISELR0 and DXREFISELR1 to 0x30, maintain other defaults
++DATA 4 DDR_PHY_DX1GCR5_0 0x09092020 // Set DXREFISELR0 and DXREFISELR1 to 0x30, maintain other defaults
++DATA 4 DDR_PHY_DX2GCR5_0 0x09092020 // Set DXREFISELR0 and DXREFISELR1 to 0x30, maintain other defaults
++DATA 4 DDR_PHY_DX3GCR5_0 0x09092020 // Set DXREFISELR0 and DXREFISELR1 to 0x30, maintain other defaults
++DATA 4 DDR_PHY_DX0GCR4_0 0x0E00BF3C // Set DXREFSSEL,DXREFSSELRANGE,DXREFSEN,DXREFIEN, maintain other defaults
++DATA 4 DDR_PHY_DX1GCR4_0 0x0E00BF3C // Set DXREFSSEL,DXREFSSELRANGE,DXREFSEN,DXREFIEN, maintain other defaults
++DATA 4 DDR_PHY_DX2GCR4_0 0x0E00BF3C // Set DXREFSSEL,DXREFSSELRANGE,DXREFSEN,DXREFIEN, maintain other defaults
++DATA 4 DDR_PHY_DX3GCR4_0 0x0E00BF3C // Set DXREFSSEL,DXREFSSELRANGE,DXREFSEN,DXREFIEN, maintain other defaults
++// Set-up DATX8 DX Control Register 2
++// PREOEX=2.5tCK (0.5 more than MR1), POSOEX=1tCK (0.5 more than in MR3), LPWAKEUP_THRSH=0xA
++DATA 4 DDR_PHY_DX8SLbDXCTL2_0 0x001C1400
++// Set-up DATX8 IO Control Register
++DATA 4 DDR_PHY_DX8SLbIOCR_0 0x79000000 // I/O mode = LPDDR4
++//-------------------------------------------
++// Configure registers for DRAM initialization
++//-------------------------------------------
++// Set-up Mode Register
++// MR0, MR3, MR4, MR5 MR6 are untouched
++DATA 4 DDR_PHY_MR1_1 0x54 // Set BL, WR-PRE, nWR, RPST
++DATA 4 DDR_PHY_MR2_1 0x2D // Set RL/WL
++DATA 4 DDR_PHY_MR3_1 0xF1 // Set drive strength
++
++DATA 4 DDR_PHY_MR11_1 0x54 // Set CA ODT and DQ ODT
++DATA 4 DDR_PHY_MR22_1 0x15 // Set ODTE-CS=1 (overrides ODT_CA for CS1 as CS not shared between ranks)
++/* LPDDR4 mode register writes for CA and DQ VREF settings */
++DATA 4 DDR_PHY_MR12_1 0x48
++DATA 4 DDR_PHY_MR14_1 0x48
++// Set-up DRAM Timing Parameters Register
++// DTPR6 is untouched
++DATA 4 DDR_PHY_DTPR0_1 0x1044220C // tRRD, tRAS, tRP, tRTP
++DATA 4 DDR_PHY_DTPR1_1 0x28400417 // tWLMRD, tFAW, tODTUP, tMRD
++DATA 4 DDR_PHY_DTPR2_1 0x006CA1CC // tRTW, tRTODT, tCMDCKE, tCKE, tVRCG, tXS
++DATA 4 DDR_PHY_DTPR3_1 0x01800602 // tODX, tCCD, tDLLK, tDQSCKmax, tDQSCK (FIXME double check tDLLK)
++DATA 4 DDR_PHY_DTPR4_1 0x01C02B0F // tRFC, tWLO, tXP
++DATA 4 DDR_PHY_DTPR5_1 0x21651D11 // tRC, tRCD, tWTR
++// Set-up PHY Timing Register
++DATA 4 DDR_PHY_PTR3_1 0x0030D400 // tDINIT0
++DATA 4 DDR_PHY_PTR4_1 0x00000C80 // tDINIT1
++DATA 4 DDR_PHY_PTR5_1 0x0004E200 // tDINIT2
++DATA 4 DDR_PHY_PTR6_1 0x03300640 // tDINIT4, tDINIT3 (1us)
++// Set-up ODT Configuration Register
++// DDR ODT_CA signal is tied at boundary of DDR. Thus no need to drive it dynamically.
++DATA 4 DDR_PHY_RANKIDR_1 0x00000001 // Select rank 1 to write
++DATA 4 DDR_PHY_ODTCR_1 0x00000000 // ODT of rank1 disabled
++DATA 4 DDR_PHY_RANKIDR_1 0x00000000 // Select rank 0 to write
++DATA 4 DDR_PHY_ODTCR_1 0x00000000 // ODT of rank0 disabled
++// Set-up AC I/O Configuration Register
++// ACIOCR1-4 are untouched
++DATA 4 DDR_PHY_ACIOCR0_1 0x30070800 // PNUM2 (i.e.LPDDR4) selection [10:11] = 0x2
++DATA 4 DDR_PHY_ACIOCR5_1 0x09000000 // I/O mode = LPDDR4
++// Due to address copy set A[13] (=cke_B[0]) and A[15] (=cke_B[1]) outputs as always ON.
++DATA 4 DDR_PHY_ACIOCR1_1 0x44000000
++// Set-up VREF Training Control Registers
++DATA 4 DDR_PHY_VTCR0_1 0xF0032008 // CK1, CK0, DRAM VREF set to same as MR12
++DATA 4 DDR_PHY_VTCR1_1 0x07F001AF // HVIO=1, SHREN=1, SHRNK=0
++// Set-up DATX8 General Configuration Registers
++// DXnGCR0-4 are untouched
++SET_BIT 4 DDR_PHY_PGCR5_1 0x4
++DATA 4 DDR_PHY_PGCR6_1 0x00033200 // Enable CSN Bit Delay VT Compensation (AC already enabled by default) + drift limit
++// Set-up DATX8 General Configuration Registers
++DATA 4 DDR_PHY_DX0GCR5_1 0x09092020 // Set DXREFISELR0 and DXREFISELR1 to 0x30, maintain other defaults
++DATA 4 DDR_PHY_DX1GCR5_1 0x09092020 // Set DXREFISELR0 and DXREFISELR1 to 0x30, maintain other defaults
++DATA 4 DDR_PHY_DX2GCR5_1 0x09092020 // Set DXREFISELR0 and DXREFISELR1 to 0x30, maintain other defaults
++DATA 4 DDR_PHY_DX3GCR5_1 0x09092020 // Set DXREFISELR0 and DXREFISELR1 to 0x30, maintain other defaults
++DATA 4 DDR_PHY_DX0GCR4_1 0x0E00BF3C // Set DXREFSSEL,DXREFSSELRANGE,DXREFSEN,DXREFIEN, maintain other defaults
++DATA 4 DDR_PHY_DX1GCR4_1 0x0E00BF3C // Set DXREFSSEL,DXREFSSELRANGE,DXREFSEN,DXREFIEN, maintain other defaults
++DATA 4 DDR_PHY_DX2GCR4_1 0x0E00BF3C // Set DXREFSSEL,DXREFSSELRANGE,DXREFSEN,DXREFIEN, maintain other defaults
++DATA 4 DDR_PHY_DX3GCR4_1 0x0E00BF3C // Set DXREFSSEL,DXREFSSELRANGE,DXREFSEN,DXREFIEN, maintain other defaults
++// Set-up DATX8 DX Control Register 2
++// PREOEX=2.5tCK (0.5 more than MR1), POSOEX=1tCK (0.5 more than in MR3), LPWAKEUP_THRSH=0xA
++DATA 4 DDR_PHY_DX8SLbDXCTL2_1 0x001C1400
++// Set-up DATX8 IO Control Register
++DATA 4 DDR_PHY_DX8SLbIOCR_1 0x79000000 // I/O mode = LPDDR4
++
++#if DDR_TRAIN_IN_DCD
++// Wait PHY initialization end then launch DRAM initialization
++// Wait for bit 0 of PGSR0 to be '1'
++CHECK_BITS_SET 4 DDR_PHY_PGSR0_0 0x1
++// Wait for bit 0 of PGSR0 to be '1'
++CHECK_BITS_SET 4 DDR_PHY_PGSR0_1 0x1
++
++// Launch DRAM 0 initialization (set bit 0)
++DATA 4 DDR_PHY_PIR_0 0x180
++DATA 4 DDR_PHY_PIR_0 0x181
++// Launch DRAM 1 initialization (set bit 0)
++DATA 4 DDR_PHY_PIR_1 0x180
++DATA 4 DDR_PHY_PIR_1 0x181
++
++// DRAM 0 initialization end
++CHECK_BITS_SET 4 DDR_PHY_PGSR0_0 0x1
++// DRAM 1 initialization end
++CHECK_BITS_SET 4 DDR_PHY_PGSR0_1 0x1
++
++// Launch a second time DRAM initialization due to following Synopsys PHY bug:
++// Title: "PUB does not program LPDDR4 DRAM MR22 prior to running DRAM ZQ calibration"
++// Workaround: "Run DRAM Initialization twice"
++DATA 4 DDR_PHY_PIR_0 0x100
++DATA 4 DDR_PHY_PIR_0 0x101
++DATA 4 DDR_PHY_PIR_1 0x100
++DATA 4 DDR_PHY_PIR_1 0x101
++
++// Wait (second time) DRAM 0 initialization end
++CHECK_BITS_SET 4 DDR_PHY_PGSR0_0 0x1
++// Wait (second time) DRAM 1 initialization end
++CHECK_BITS_SET 4 DDR_PHY_PGSR0_1 0x1
++
++//---------------------------------------------------------------//
++// DATA training
++//---------------------------------------------------------------//
++// configure PHY for data training
++// The following register writes are recommended by SNPS prior to running training
++CLR_BIT 4 DDR_PHY_DQSDR0_0 0x00000001 // Disable drift
++SET_BIT 4 DDR_PHY_PGCR6_0 0x00000001 // Disable VT compensation
++CHECK_BITS_SET 4 DDR_PHY_PGSR1_0 0x40000000 // Disable VT compensation
++SET_BIT 4 DDR_PHY_PGCR1_0 0x00020040 // DISDIC=1; PUBMODE=1
++// Per SNPS initialize BIST registers for VREF training
++DATA 4 DDR_PHY_BISTAR1_0 0x00010100 //BMRANK=1 (maximum rank minus 1); BIST Address Increment: 0x10 (16)
++DATA 4 DDR_PHY_BISTAR2_0 0x700003FF // BMBANK=8; BMCOL=0x400 (limit to min cols in JEDEC)
++DATA 4 DDR_PHY_BISTAR4_0 0x00003FFF // BMROW=0x4000 (limit to min rows in JEDEC)
++
++CLR_BIT 4 DDR_PHY_DQSDR0_1 0x00000001 // Disable drift
++SET_BIT 4 DDR_PHY_PGCR6_1 0x00000001 // Disable VT compensation
++CHECK_BITS_SET 4 DDR_PHY_PGSR1_1 0x40000000 // Disable VT compensation
++SET_BIT 4 DDR_PHY_PGCR1_1 0x00020040 // DISDIC=1; PUBMODE=1
++// Per SNPS initialize BIST registers for VREF training
++DATA 4 DDR_PHY_BISTAR1_1 0x00010100 //BMRANK=1 (maximum rank minus 1); BIST Address Increment: 0x10 (16)
++DATA 4 DDR_PHY_BISTAR2_1 0x700003FF // BMBANK=8; BMCOL=0x400 (limit to min cols in JEDEC)
++DATA 4 DDR_PHY_BISTAR4_1 0x00003FFF // BMROW=0x4000 (limit to min rows in JEDEC)
++
++// Set-up Data Training Configuration Register
++// Note that DTCR0.RFSHDT are set to 0x0 as a workaround for PHY bug (Synopsys
++// case 9001045655: Design limitation in LPDDR4 mode: REFRESH must be disabled during DQS2DQ training).
++// (FYI avoiding refresh during training leads to Denali error (CUMULATIVE_REFRESH_POSTPONE_EXCEEDS_MAX_ALLOWED).
++DATA 4 DDR_PHY_DTCR0_0 0x000071C7 // Set DTRPTN to 0x7. RFSHDT=0
++DATA 4 DDR_PHY_DTCR1_0 0x00030236 // Set RANKEN
++DATA 4 DDR_PHY_DTCR0_1 0x000071C7 // Set DTRPTN to 0x7. RFSHDT=0
++DATA 4 DDR_PHY_DTCR1_1 0x00030236 // Set RANKEN
++
++// Launch Write leveling
++DATA 4 DDR_PHY_PIR_0 0x200
++DATA 4 DDR_PHY_PIR_0 0x201
++DATA 4 DDR_PHY_PIR_1 0x200
++DATA 4 DDR_PHY_PIR_1 0x201
++// Wait Write leveling to complete
++CHECK_BITS_SET 4 DDR_PHY_PGSR0_0 0x1
++CHECK_BITS_CLR 4 DDR_PHY_PGSR0_0 0x00200000
++CHECK_BITS_SET 4 DDR_PHY_PGSR0_1 0x1
++CHECK_BITS_CLR 4 DDR_PHY_PGSR0_1 0x00200000
++
++// Set DQS/DQSn glitch suppression resistor for training PHY0
++DATA 4 DDR_PHY_DX8SLbDQSCTL_0 0x012640F7
++// Launch Read DQS training
++DATA 4 DDR_PHY_PIR_0 0x400
++DATA 4 DDR_PHY_PIR_0 0x401
++// Set DQS/DQSn glitch suppression resistor for training PHY1
++DATA 4 DDR_PHY_DX8SLbDQSCTL_1 0x012640F7
++// Launch Read DQS training
++DATA 4 DDR_PHY_PIR_1 0x400
++DATA 4 DDR_PHY_PIR_1 0x401
++// Wait Read DQS training to complete PHY0
++CHECK_BITS_SET 4 DDR_PHY_PGSR0_0 0x1
++CHECK_BITS_CLR 4 DDR_PHY_PGSR0_0 0x00400000
++// Remove DQS/DQSn glitch suppression resistor PHY0
++DATA 4 DDR_PHY_DX8SLbDQSCTL_0 0x01264000
++// Wait Read DQS training to complete PHY1
++CHECK_BITS_SET 4 DDR_PHY_PGSR0_1 0x1
++CHECK_BITS_CLR 4 DDR_PHY_PGSR0_1 0x00400000
++// Remove DQS/DQSn glitch suppression resistor PHY1
++DATA 4 DDR_PHY_DX8SLbDQSCTL_1 0x01264000
++
++// DQS2DQ training, Write leveling, Deskew and eye trainings
++DATA 4 DDR_PHY_PIR_0 0x0010F800
++DATA 4 DDR_PHY_PIR_0 0x0010F801
++DATA 4 DDR_PHY_PIR_1 0x0010F800
++DATA 4 DDR_PHY_PIR_1 0x0010F801
++// Wait for training to complete
++CHECK_BITS_SET 4 DDR_PHY_PGSR0_0 0x1
++CHECK_BITS_CLR 4 DDR_PHY_PGSR0_0 0x7FF40000
++CHECK_BITS_SET 4 DDR_PHY_PGSR0_1 0x1
++CHECK_BITS_CLR 4 DDR_PHY_PGSR0_1 0x7FF40000
++
++// Launch VREF training
++DATA 4 DDR_PHY_PIR_0 0x00020000
++DATA 4 DDR_PHY_PIR_0 0x00020001
++DATA 4 DDR_PHY_PIR_1 0x00020000
++DATA 4 DDR_PHY_PIR_1 0x00020001
++// Wait for training to complete
++CHECK_BITS_SET 4 DDR_PHY_PGSR0_0 0x1
++CHECK_BITS_CLR 4 DDR_PHY_PGSR0_0 0x00080000
++CHECK_BITS_SET 4 DDR_PHY_PGSR0_1 0x1
++CHECK_BITS_CLR 4 DDR_PHY_PGSR0_1 0x00080000
++
++//Re-allow uMCTL2 to send commands to DDR
++CLR_BIT 4 DDR_PHY_PGCR1_0 0x00020040 // DISDIC=0, PUBMODE=0
++CLR_BIT 4 DDR_PHY_PGCR1_1 0x00020040 // DISDIC=0, PUBMODE=0
++
++//DQS Drift Registers PHY0
++CLR_BIT 4 DDR_PHY_DX0GCR3_0 0x08000000
++CLR_BIT 4 DDR_PHY_DX1GCR3_0 0x08000000
++CLR_BIT 4 DDR_PHY_DX2GCR3_0 0x08000000
++CLR_BIT 4 DDR_PHY_DX3GCR3_0 0x08000000
++// Enable DQS drift detection PHY0
++DATA 4 DDR_PHY_DQSDR0_0 0x20188005
++DATA 4 DDR_PHY_DQSDR1_0 0xA8AA0000
++DATA 4 DDR_PHY_DQSDR2_0 0x00070200
++//DQS Drift Registers PHY1
++CLR_BIT 4 DDR_PHY_DX0GCR3_1 0x08000000
++CLR_BIT 4 DDR_PHY_DX1GCR3_1 0x08000000
++CLR_BIT 4 DDR_PHY_DX2GCR3_1 0x08000000
++CLR_BIT 4 DDR_PHY_DX3GCR3_1 0x08000000
++// Enable DQS drift detection PHY1
++DATA 4 DDR_PHY_DQSDR0_1 0x20188005
++DATA 4 DDR_PHY_DQSDR1_1 0xA8AA0000
++DATA 4 DDR_PHY_DQSDR2_1 0x00070200
++
++// Enable VT compensation
++CLR_BIT 4 DDR_PHY_PGCR6_0 0x1
++CLR_BIT 4 DDR_PHY_PGCR6_1 0x1
++
++//Check that controller is ready to operate
++CHECK_BITS_SET 4 DDRC_STAT_0 0x1
++CHECK_BITS_SET 4 DDRC_STAT_1 0x1
++
++#endif
+diff --git a/iMX8QM/imx8qm_apalis-imx8_dcd_800MHz.cfg b/iMX8QM/imx8qm_apalis-imx8_dcd_800MHz.cfg
+new file mode 100755
+index 0000000..8ded32d
+--- /dev/null
++++ b/iMX8QM/imx8qm_apalis-imx8_dcd_800MHz.cfg
+@@ -0,0 +1,523 @@
++#define __ASSEMBLY__
++
++#include <ddrc_mem_map.h>
++#include <ddr_phy_mem_map.h>
++
++/*
++ * Device Configuration Data (DCD)
++ *
++ * Each entry must have the format:
++ * Addr-type Address Value
++ *
++ * where:
++ * Addr-type register length (1,2 or 4 bytes)
++ * Address absolute address of the register
++ * value value to be stored in the register
++ */
++
++#ifndef SCFW_DCD
++/* For 800MHz DDR, DRC 400MHz operation */
++DATA 4 0xff148000 0x00000C85 /* DRC0 bringup */
++DATA 4 0xff1a0000 0x00000C85 /* DRC1 bringup */
++#else
++/* Set the DRC rate to 800MHz. */
++uint32_t rate2 = SC_400MHZ;
++pm_set_clock_rate(SC_PT, SC_R_DRC_0, SC_PM_CLK_MISC0, &rate2);
++pm_set_clock_rate(SC_PT, SC_R_DRC_1, SC_PM_CLK_MISC0, &rate2);
++#endif
++
++DATA 4 0x41a40208 0x1
++DATA 4 0x41d00208 0x1
++DATA 4 0x41a40040 0xb
++DATA 4 0x41d00040 0xb
++DATA 4 0x41a40204 0x1
++DATA 4 0x41d00204 0x1
++/* DRAM 0 controller configuration begin */
++DATA 4 DDRC_MSTR_0 0xC3080020 // Set LPDDR4, BL = 16 and active ranks
++DATA 4 DDRC_RFSHTMG_0 0x002E0072 // tREFI, tRFC
++DATA 4 DDRC_INIT0_0 0x40020320 // pre_cke
++DATA 4 DDRC_INIT1_0 0x00520000 // dram_rstn
++DATA 4 DDRC_INIT3_0 0x00240012 // MR1=0x54: nWR=30 BL=16; MR2=0x2d: RL=28 WL=14
++DATA 4 DDRC_INIT4_0 0x00310000 // MR3, MR13
++DATA 4 DDRC_RANKCTL_0 0x0000075f // diff_rank_wr_gap, diff_rank_rd_gap, max_rank_rd
++DATA 4 DDRC_DRAMTMG0_0 0x11110D11 // wr2pr, tFAW, tRASmax, tRASmin
++DATA 4 DDRC_DRAMTMG1_0 0x0004041A // tXP, rd2pre, tRC
++DATA 4 DDRC_DRAMTMG2_0 0x04070C0D // WL, RL, rd2wr, wr2rd
++DATA 4 DDRC_DRAMTMG3_0 0x00606007 // tmrw, tmrd, tmod
++DATA 4 DDRC_DRAMTMG4_0 0x08040509 // trcd, tccd, trrd, trp
++DATA 4 DDRC_DRAMTMG5_0 0x02030707 // tCKCKEH, tCKCKEL, tckesr, tcke
++DATA 4 DDRC_DRAMTMG6_0 0x02020005 // tckdpde, tckdpdx, tckcsx
++DATA 4 DDRC_DRAMTMG7_0 0x00000302 // tckpde, tckpdx
++DATA 4 DDRC_DRAMTMG12_0 0x00020300 // tCMDCKE, tCKEHCMD (=tXP?)
++DATA 4 DDRC_DRAMTMG13_0 0x0a100002 // tODTLoff, tCCDMW, tPPD
++DATA 4 DDRC_DRAMTMG14_0 0x00000074 // txsr
++DATA 4 DDRC_ZQCTL0_0 0x0192000d // tZQCAL, tZQLAT
++DATA 4 DDRC_ZQCTL1_0 0x01400100 // tZQReset, tzq_short_interval
++DATA 4 DDRC_DFITMG0_0 0x048C8206 // dfi_t_ctrl_delay, dfi_t_rddata_en, dfi_tphy_wrdata, dfi_tphy_wrlat
++DATA 4 DDRC_DFITMG1_0 0x00060303 // dfi_t_wrdata_delay, dfi_t_dram_clk_disable, dfi_t_dram_clk_enable
++DATA 4 DDRC_DFITMG2_0 0x00000A04 // dfi_tphy_rdcslat, dfi_tphy_wrcslat
++DATA 4 DDRC_DFIMISC_0 0x00000005 // dfi_data_cs_polarity
++DATA 4 DDRC_DFIUPD0_0 0x00400003 // Disable the automatic dfi_ctrlupd_req generation
++DATA 4 DDRC_DFIUPD1_0 0x008000A0 // dfi_ctrlupd_req generation interval generation (min and max)
++DATA 4 DDRC_DFIUPD2_0 0x80000000 // dfi_phyupd_en
++DATA 4 DDRC_ADDRMAP4_0 0x00001F1F // addrmap_col_b10 and addrmap_col_b11 set to de-activated
++DATA 4 DDRC_ADDRMAP1_0 0x00080808 // addrmap_bank_b2, addrmap_bank_b1, addrmap_bank_b0
++DATA 4 DDRC_ADDRMAP5_0 0x07070707 // addrmap_row_b11, addrmap_row_b10_b2, addrmap_row_b1, addrmap_row_b0
++
++// For 16Gb configurations
++// Address map is from MSB 28: cs, r14, r13-r0, b2-b0, c9-c0
++DATA 4 DDRC_ADDRMAP0_0 0x00000016 // addrmap_cs_bit0 (board memory)
++DATA 4 DDRC_ADDRMAP6_0 0x0F070707 // addrmap_row_b15, addrmap_row_b14, addrmap_row_b13, addrmap_row_b12 (board memory)
++
++// Per QXP team, ODTMAP not use for LP4, need to confirm for QM
++DATA 4 DDRC_ODTMAP_0 0x00002211 // rank[3:0]_wr_odt, rank[3:0]_wr_odt
++//DATA 4 DDRC_ODTMAP_0 0x00000000
++DATA 4 DDRC_PCTRL_0_0 0x00000001 // Enable port 0
++
++DATA 4 DDRC_DFITMG0_SHADOW_0 0x00808000
++
++/* DRAM 1 controller initialization */
++DATA 4 DDRC_MSTR_1 0xC3080020 // Set LPDDR4, BL = 16 and active ranks
++DATA 4 DDRC_RFSHTMG_1 0x002E0072 // tREFI, tRFC
++DATA 4 DDRC_INIT0_1 0x40020320 // pre_cke
++DATA 4 DDRC_INIT1_1 0x00520000 // dram_rstn
++DATA 4 DDRC_INIT3_1 0x00240012 // MR1=0x54: nWR=30 BL=16; MR2=0x2d: RL=28 WL=14
++DATA 4 DDRC_INIT4_1 0x00310000 // MR3, MR13
++DATA 4 DDRC_RANKCTL_1 0x0000075f // diff_rank_wr_gap, diff_rank_rd_gap, max_rank_rd
++DATA 4 DDRC_DRAMTMG0_1 0x11110D11 // wr2pr, tFAW, tRASmax, tRASmin
++DATA 4 DDRC_DRAMTMG1_1 0x0004041A // tXP, rd2pre, tRC
++DATA 4 DDRC_DRAMTMG2_1 0x04070C0D // WL, RL, rd2wr, wr2rd
++DATA 4 DDRC_DRAMTMG3_1 0x00606007 // tmrw, tmrd, tmod
++DATA 4 DDRC_DRAMTMG4_1 0x08040509 // trcd, tccd, trrd, trp
++DATA 4 DDRC_DRAMTMG5_1 0x02030707 // tCKCKEH, tCKCKEL, tckesr, tcke
++DATA 4 DDRC_DRAMTMG6_1 0x02020005 // tckdpde, tckdpdx, tckcsx
++DATA 4 DDRC_DRAMTMG7_1 0x00000302 // tckpde, tckpdx
++DATA 4 DDRC_DRAMTMG12_1 0x00020300 // tCMDCKE, tCKEHCMD (=tXP?)
++DATA 4 DDRC_DRAMTMG13_1 0x0a100002 // tODTLoff, tCCDMW, tPPD
++DATA 4 DDRC_DRAMTMG14_1 0x00000074 // txsr
++DATA 4 DDRC_ZQCTL0_1 0x0192000d // tZQCAL, tZQLAT
++DATA 4 DDRC_ZQCTL1_1 0x01400100 // tZQReset, tzq_short_interval
++DATA 4 DDRC_DFITMG0_1 0x048C8206 // dfi_t_ctrl_delay, dfi_t_rddata_en, dfi_tphy_wrdata, dfi_tphy_wrlat
++DATA 4 DDRC_DFITMG1_1 0x00060303 // dfi_t_wrdata_delay, dfi_t_dram_clk_disable, dfi_t_dram_clk_enable
++DATA 4 DDRC_DFITMG2_1 0x00000A04 // dfi_tphy_rdcslat, dfi_tphy_wrcslat
++DATA 4 DDRC_DFIMISC_1 0x00000005 // dfi_data_cs_polarity
++DATA 4 DDRC_DFIUPD0_1 0x00400003 // Disable the automatic dfi_ctrlupd_req generation
++DATA 4 DDRC_DFIUPD1_1 0x008000A0 // dfi_ctrlupd_req generation interval generation (min and max)
++DATA 4 DDRC_DFIUPD2_1 0x80000000 // dfi_phyupd_en
++DATA 4 DDRC_ADDRMAP4_1 0x00001F1F // addrmap_col_b10 and addrmap_col_b11 set to de-activated
++DATA 4 DDRC_ADDRMAP1_1 0x00080808 // addrmap_bank_b2, addrmap_bank_b1, addrmap_bank_b0
++DATA 4 DDRC_ADDRMAP5_1 0x07070707 // addrmap_row_b11, addrmap_row_b10_b2, addrmap_row_b1, addrmap_row_b0
++
++// For 16Gb configurations
++// Address map is from MSB 28: cs, r14, r13-r0, b2-b0, c9-c0
++DATA 4 DDRC_ADDRMAP0_1 0x00000016 // addrmap_cs_bit0 (board memory)
++DATA 4 DDRC_ADDRMAP6_1 0x0F070707 // addrmap_row_b15, addrmap_row_b14, addrmap_row_b13, addrmap_row_b12 (board memory)
++
++// Per QXP team, ODTMAP not use for LP4, need to confirm for QM
++DATA 4 DDRC_ODTMAP_1 0x00002211 // rank[3:0]_wr_odt, rank[3:0]_wr_odt
++//DATA 4 DDRC_ODTMAP_1 0x00000000
++DATA 4 DDRC_PCTRL_0_1 0x00000001 // Enable port 0
++DATA 4 DDRC_DFITMG0_SHADOW_1 0x00808000
++DATA 4 0x41a40208 0x1
++DATA 4 0x41d00208 0x1
++DATA 4 0x41a40040 0xf
++DATA 4 0x41d00040 0xf
++DATA 4 0x41a40204 0x1
++DATA 4 0x41d00204 0x1
++//-------------------------------------------
++// Configure registers for PHY initialization
++// Timings are computed for 1600MHz DRAM operation
++//--------------------------------------------
++// Set-up DRAM Configuration Register
++DATA 4 DDR_PHY_DCR_0 0x0000040D // LPDDR4 selection with 8 bank
++// Set-up byte and bit swapping registers
++DATA 4 DDR_PHY_PGCR8_0 0x000F0009 // Set BSWAPMSB='b1001 (byte 0 and 1 are swapped)
++DATA 4 DDR_PHY_DX0DQMAP0_0 0x00070142 // DQ bit 0/1/2/3/4 remapping
++DATA 4 DDR_PHY_DX0DQMAP1_0 0x00008653 // DQ bit 5/6/7 and DM remapping
++DATA 4 DDR_PHY_DX1DQMAP0_0 0x00056210 // DQ bit 0/1/2/3/4 remapping
++DATA 4 DDR_PHY_DX1DQMAP1_0 0x00008473 // DQ bit 5/6/7 and DM remapping
++DATA 4 DDR_PHY_DX2DQMAP0_0 0x00065734 // DQ bit 0/1/2/3/4 remapping
++DATA 4 DDR_PHY_DX2DQMAP1_0 0x00008012 // DQ bit 5/6/7 and DM remapping
++DATA 4 DDR_PHY_DX3DQMAP0_0 0x00061037 // DQ bit 0/1/2/3/4 remapping
++DATA 4 DDR_PHY_DX3DQMAP1_0 0x00008452 // DQ bit 5/6/7 and DM remapping
++DATA 4 DDR_PHY_CATR0_0 0x00141032 // Only for LPDDR3 but used here to know how LPDDR4 bytes are connected to PHY
++DATA 4 DDR_PHY_CATR1_0 0x0013AAAA // Only for LPDDR3 but used here to know how LPDDR4 bytes are connected to PHY
++// Set-up PHY General Configuration Register
++// PGCR1,4,5,6,7 are untouched
++SET_BIT 4 DDR_PHY_PGCR1_0 0x00020000 // DISDIC=1 (no uMCTL2 commands can go to memory)
++DATA 4 DDR_PHY_PGCR0_0 0x87001E00 // Set ADCP=1 (Address Copy)
++DATA 4 DDR_PHY_PGCR2_0 0x00F06AAC // Set tREFPRD (9*3.904us - 600)
++DATA 4 DDR_PHY_PGCR3_0 0x050A1080 // CKEN/CKNEN toggling and polarity
++// Set-up PHY Timing Register
++// PTR2 is untouched
++DATA 4 DDR_PHY_PTR0_0 0x32019010 // tPLLPD, tPLLGS, tPHYRST
++DATA 4 DDR_PHY_PTR1_0 0x27100E10 // tPLLLOCK reduced to 4.3us, tPLLRST=9us
++// Set-up PLL Control Register
++DATA 4 DDR_PHY_PLLCR0_0 0x02120000 // FREQSEL=2, CPPC=0x9
++DATA 4 DDR_PHY_DX8SLbPLLCR0_0 0x02120000
++// Set-up Impedance Control Register
++DATA 4 DDR_PHY_ZQCR_0 0x008A2C58 // Set ODT_MODE=0b10(LPDDR4 stype pullup)
++// ZPROG_DRAM_ODT and ZPROG_HOST_ODT = 60ohm
++DATA 4 DDR_PHY_ZQ0PR0_0 0x1B9BB // Updated ZPROG_HOST_ODT per QXP analysis
++DATA 4 DDR_PHY_ZQ1PR0_0 0x1B9BB // Updated ZPROG_HOST_ODT per QXP analysis
++// Set-up PHY Initialization Register
++DATA 4 DDR_PHY_PIR_0 0x32
++// Launch initialization (set bit 0)
++DATA 4 DDR_PHY_PIR_0 0x33
++//-------------------------------------------
++// Configure registers for PHY initialization
++// Timings are computed for a PHY at 800MHz (DRAM at 1600MHz)
++//-------------------------------=------------
++// Set-up DRAM 1 PHY Configuration Register
++DATA 4 DDR_PHY_DCR_1 0x0000040D // LPDDR4 selection with 8 bank
++// Set-up byte and bit swapping registers
++DATA 4 DDR_PHY_PGCR8_1 0x000F000F // Set BSWAPMSB='b0000
++DATA 4 DDR_PHY_DX0DQMAP0_1 0x00021307 // DQ bit 0/1/2/3/4 remapping
++DATA 4 DDR_PHY_DX0DQMAP1_1 0x00008456 // DQ bit 5/6/7 and DM remapping
++DATA 4 DDR_PHY_DX1DQMAP0_1 0x00072510 // DQ bit 0/1/2/3/4 remapping
++DATA 4 DDR_PHY_DX1DQMAP1_1 0x00008436 // DQ bit 5/6/7 and DM remapping
++DATA 4 DDR_PHY_DX2DQMAP0_1 0x00056710 // DQ bit 0/1/2/3/4 remapping
++DATA 4 DDR_PHY_DX2DQMAP1_1 0x00008243 // DQ bit 5/6/7 and DM remapping
++DATA 4 DDR_PHY_DX3DQMAP0_1 0x00031602 // DQ bit 0/1/2/3/4 remapping
++DATA 4 DDR_PHY_DX3DQMAP1_1 0x00008547 // DQ bit 5/6/7 and DM remapping
++DATA 4 DDR_PHY_CATR0_1 0x00141032 // Only for LPDDR3 but used here to know how LPDDR4 bytes are connected to PHY
++DATA 4 DDR_PHY_CATR1_1 0x0013AAAA // Only for LPDDR3 but used here to know how LPDDR4 bytes are connected to PHY
++// Set-up PHY General Configuration Register
++// PGCR1,4,5,6,7 are untouched
++SET_BIT 4 DDR_PHY_PGCR1_1 0x00020000 // DISDIC=1 (no uMCTL2 commands can go to memory)
++DATA 4 DDR_PHY_PGCR0_1 0x87001E00 // Set ADCP=1 (Address Copy)
++DATA 4 DDR_PHY_PGCR2_1 0x00F06AAC // Set tREFPRD (9*3.904us - 600)
++DATA 4 DDR_PHY_PGCR3_1 0x050A1080 // CKEN/CKNEN toggling and polarity
++// Set-up PHY Timing Register
++// PTR2 is untouched
++DATA 4 DDR_PHY_PTR0_1 0x32019010 // tPLLPD, tPLLGS, tPHYRST
++DATA 4 DDR_PHY_PTR1_1 0x27100E10 // tPLLLOCK reduced to 4.3us, tPLLRST=9us
++// Set-up PLL Control Register
++DATA 4 DDR_PHY_PLLCR0_1 0x02120000 // FREQSEL=2, CPPC=0x9
++DATA 4 DDR_PHY_DX8SLbPLLCR0_1 0x02120000
++// Set-up Impedance Control Register
++DATA 4 DDR_PHY_ZQCR_1 0x008A2C58 // Set ODT_MODE=0b10(LPDDR4 stype pullup)
++// ZPROG_DRAM_ODT and ZPROG_HOST_ODT = 60ohm
++DATA 4 DDR_PHY_ZQ0PR0_1 0x1B9BB // Updated ZPROG_HOST_ODT per QXP analysis
++DATA 4 DDR_PHY_ZQ1PR0_1 0x1B9BB // Updated ZPROG_HOST_ODT per QXP analysis
++// Set-up PHY Initialization Register
++DATA 4 DDR_PHY_PIR_1 0x32
++// Launch initialization (set bit 0)
++DATA 4 DDR_PHY_PIR_1 0x33
++//-------------------------------------------
++// Configure registers for DRAM initialization
++//-------------------------------------------
++// Set-up Mode Register
++// MR0, MR3, MR4, MR5 MR6 are untouched
++DATA 4 DDR_PHY_MR1_0 0x24 // Set BL, WR-PRE, nWR, RPST
++DATA 4 DDR_PHY_MR2_0 0x12 // Set RL=28/WL=14
++DATA 4 DDR_PHY_MR3_0 0x31 // Set drive strength (40 Ohms by default)
++
++DATA 4 DDR_PHY_MR11_0 0x04 // Set CA ODT=RZQ/4, updated per QXP analysis
++DATA 4 DDR_PHY_MR22_0 0x15 // Set ODTE-CS=1 (overrides ODT_CA for CS1 as CS not shared between ranks)
++/* LPDDR4 mode register writes for CA and DQ VREF settings; range=1, 27.2% */
++DATA 4 DDR_PHY_MR12_0 0x48
++DATA 4 DDR_PHY_MR14_0 0x48
++// Set-up DRAM Timing Parameters Register
++// DTPR6 is untouched
++DATA 4 DDR_PHY_DTPR0_0 0x09221108 // tRRD, tRAS, tRP, tRTP
++DATA 4 DDR_PHY_DTPR1_0 0x28200D0E // tWLMRD, tFAW, tODTUP, tMRD
++DATA 4 DDR_PHY_DTPR2_0 0x006740E7 // tRTW, tRTODT, tCMDCKE, tCKE, tVRCG, tXS
++DATA 4 DDR_PHY_DTPR3_0 0x01800302 // tODX, tCCD, tDLLK, tDQSCKmax, tDQSCK (FIXME double check tDLLK)
++DATA 4 DDR_PHY_DTPR4_0 0x00E10F0A // tRFC, tWLO, tXP
++DATA 4 DDR_PHY_DTPR5_0 0x11330F0A // tRC, tRCD, tWTR
++// Set-up PHY Timing Register
++DATA 4 DDR_PHY_PTR3_0 0x00186A10 // tDINIT0 - 2ms
++DATA 4 DDR_PHY_PTR4_0 0x00000650 // tDINIT1 (2000ns)
++DATA 4 DDR_PHY_PTR5_0 0x00027110 // tDINIT2
++DATA 4 DDR_PHY_PTR6_0 0x01C00330 // tDINIT4 (30ns), tDINIT3 (1us)
++// Set-up DATX8 Common Configuration Register
++// DXCCR is untouched
++
++// Set-up DDR System General Configuration Register
++// DSGCR is untouched
++
++// Set-up ODT Configuration Register
++// DDR ODT_CA signal is tied at boundary of DDR. Thus no need to drive it dynamically.
++DATA 4 DDR_PHY_RANKIDR_0 1 // Select rank 1 to write
++DATA 4 DDR_PHY_ODTCR_0 0x00000000 // ODT of rank1 disabled
++DATA 4 DDR_PHY_RANKIDR_0 0 // Select rank 0 to write
++DATA 4 DDR_PHY_ODTCR_0 0x00000000 // ODT of rank0 disabled
++
++// Set-up Anti-Aging Control Register
++// AACR is untouched
++
++// Set-up Data Training Address Register
++// DTAR0-3 are untouched
++// !! DTAR3 is not described in spec !!
++
++// Set-up AC I/O Configuration Register
++// ACIOCR1-4 are untouched
++DATA 4 DDR_PHY_ACIOCR0_0 0x30070800 // PNUM2 (i.e.LPDDR4) selection [10:11] = 0x2
++DATA 4 DDR_PHY_ACIOCR5_0 0x09000000 // I/O mode = LPDDR4
++// Due to address copy set A[13] (=cke_B[0]) and A[15] (=cke_B[1]) outputs as always ON.
++DATA 4 DDR_PHY_ACIOCR1_0 0x44000000
++
++// IOVCR0-1, DXnGCR0-4??, CALBYP
++// Set-up VREF Training Control Registers
++DATA 4 DDR_PHY_VTCR0_0 0xF0032008 // CK1, CK0, DRAM VREF set to same as MR12
++DATA 4 DDR_PHY_VTCR1_0 0x07F00173 // HVIO=1, SHREN=1, SHRNK=0
++// Set-up DATX8 General Configuration Registers
++// DXnGCR0-4 are untouched
++SET_BIT 4 DDR_PHY_PGCR5_0 0x4
++DATA 4 DDR_PHY_PGCR6_0 0x00033200 // Enable CSN Bit Delay VT Compensation (AC already enabled by default) + drift limit
++// Set-up DATX8 General Configuration Registers
++DATA 4 DDR_PHY_DX0GCR5_0 0x09092020 // Set DXREFISELR0 and DXREFISELR1 to 0x30, maintain other defaults
++DATA 4 DDR_PHY_DX1GCR5_0 0x09092020 // Set DXREFISELR0 and DXREFISELR1 to 0x30, maintain other defaults
++DATA 4 DDR_PHY_DX2GCR5_0 0x09092020 // Set DXREFISELR0 and DXREFISELR1 to 0x30, maintain other defaults
++DATA 4 DDR_PHY_DX3GCR5_0 0x09092020 // Set DXREFISELR0 and DXREFISELR1 to 0x30, maintain other defaults
++DATA 4 DDR_PHY_DX0GCR4_0 0x0E00BF3C // Set DXREFSSEL,DXREFSSELRANGE,DXREFSEN,DXREFIEN, maintain other defaults
++DATA 4 DDR_PHY_DX1GCR4_0 0x0E00BF3C // Set DXREFSSEL,DXREFSSELRANGE,DXREFSEN,DXREFIEN, maintain other defaults
++DATA 4 DDR_PHY_DX2GCR4_0 0x0E00BF3C // Set DXREFSSEL,DXREFSSELRANGE,DXREFSEN,DXREFIEN, maintain other defaults
++DATA 4 DDR_PHY_DX3GCR4_0 0x0E00BF3C // Set DXREFSSEL,DXREFSSELRANGE,DXREFSEN,DXREFIEN, maintain other defaults
++// Set-up DATX8 DX Control Register 2
++// PREOEX=2.5tCK (0.5 more than MR1), POSOEX=1tCK (0.5 more than in MR3), LPWAKEUP_THRSH=0xA
++DATA 4 DDR_PHY_DX8SLbDXCTL2_0 0x001C1400
++// Set-up DATX8 IO Control Register
++DATA 4 DDR_PHY_DX8SLbIOCR_0 0x79000000 // I/O mode = LPDDR4
++//-------------------------------------------
++// Configure registers for DRAM initialization
++//-------------------------------------------
++// Set-up Mode Register
++// MR0, MR3, MR4, MR5 MR6 are untouched
++DATA 4 DDR_PHY_MR1_1 0x24 // Set BL, WR-PRE, nWR, RPST
++DATA 4 DDR_PHY_MR2_1 0x12 // Set RL=28/WL=14
++DATA 4 DDR_PHY_MR3_1 0x31 // Set drive strength (40 Ohms by default)
++
++DATA 4 DDR_PHY_MR11_1 0x04 // Set CA ODT=RZQ/4, updated per QXP analysis
++DATA 4 DDR_PHY_MR22_1 0x15 // Set ODTE-CS=1 (overrides ODT_CA for CS1 as CS not shared between ranks)
++/* LPDDR4 mode register writes for CA and DQ VREF settings; range=1, 27.2% */
++DATA 4 DDR_PHY_MR12_1 0x48
++DATA 4 DDR_PHY_MR14_1 0x48
++// Set-up DRAM Timing Parameters Register
++// DTPR6 is untouched
++DATA 4 DDR_PHY_DTPR0_1 0x09221108 // tRRD, tRAS, tRP, tRTP
++DATA 4 DDR_PHY_DTPR1_1 0x28200D0E // tWLMRD, tFAW, tODTUP, tMRD
++DATA 4 DDR_PHY_DTPR2_1 0x006740E7 // tRTW, tRTODT, tCMDCKE, tCKE, tVRCG, tXS
++DATA 4 DDR_PHY_DTPR3_1 0x01800302 // tODX, tCCD, tDLLK, tDQSCKmax, tDQSCK (FIXME double check tDLLK)
++DATA 4 DDR_PHY_DTPR4_1 0x00E10F0A // tRFC, tWLO, tXP
++DATA 4 DDR_PHY_DTPR5_1 0x11330F0A // tRC, tRCD, tWTR
++// Set-up PHY Timing Register
++DATA 4 DDR_PHY_PTR3_1 0x00186A10// tDINIT0
++DATA 4 DDR_PHY_PTR4_1 0x00000650 // tDINIT1 (2000ns)
++DATA 4 DDR_PHY_PTR5_1 0x00027110 // tDINIT2
++DATA 4 DDR_PHY_PTR6_1 0x01C00330 // tDINIT4 (30ns), tDINIT3 (1us)
++
++// Set-up DATX8 Common Configuration Register
++// DXCCR is untouched
++
++// Set-up DDR System General Configuration Register
++// DSGCR is untouched
++
++// Set-up ODT Configuration Register
++// DDR ODT_CA signal is tied at boundary of DDR. Thus no need to drive it dynamically.
++DATA 4 DDR_PHY_RANKIDR_1 1 // Select rank 1 to write
++DATA 4 DDR_PHY_ODTCR_1 0x00000000 // ODT of rank1 disabled
++DATA 4 DDR_PHY_RANKIDR_1 0 // Select rank 0 to write
++DATA 4 DDR_PHY_ODTCR_1 0x00000000 // ODT of rank0 disabled
++
++// Set-up Anti-Aging Control Register
++// AACR is untouched
++
++// Set-up Data Training Address Register
++// DTAR0-3 are untouched
++// !! DTAR3 is not described in spec !!
++
++// Set-up AC I/O Configuration Register
++// ACIOCR2-4 are untouched
++DATA 4 DDR_PHY_ACIOCR0_1 0x30070800 // PNUM2 (i.e.LPDDR4) selection [10:11] = 0x2
++DATA 4 DDR_PHY_ACIOCR5_1 0x09000000 // I/O mode = LPDDR4
++// Due to address copy set A[13] (=cke_B[0]) and A[15] (=cke_B[1]) outputs as always ON.
++DATA 4 DDR_PHY_ACIOCR1_1 0x44000000
++
++// IOVCR0-1, DXnGCR0-4??, CALBYP
++
++// Set-up VREF Training Control Registers
++DATA 4 DDR_PHY_VTCR0_1 0xF0032008 // CK1, CK0, DRAM VREF set to same as MR12
++DATA 4 DDR_PHY_VTCR1_1 0x07F00173 // HVIO=1, SHREN=1, SHRNK=0
++// Set-up DATX8 General Configuration Registers
++// DXnGCR0-4 are untouched
++SET_BIT 4 DDR_PHY_PGCR5_1 0x4
++DATA 4 DDR_PHY_PGCR6_1 0x00033200 // Enable CSN Bit Delay VT Compensation (AC already enabled by default) + drift limit
++// Set-up DATX8 General Configuration Registers
++DATA 4 DDR_PHY_DX0GCR5_1 0x09092020 // Set DXREFISELR0 and DXREFISELR1 to 0x30, maintain other defaults
++DATA 4 DDR_PHY_DX1GCR5_1 0x09092020 // Set DXREFISELR0 and DXREFISELR1 to 0x30, maintain other defaults
++DATA 4 DDR_PHY_DX2GCR5_1 0x09092020 // Set DXREFISELR0 and DXREFISELR1 to 0x30, maintain other defaults
++DATA 4 DDR_PHY_DX3GCR5_1 0x09092020 // Set DXREFISELR0 and DXREFISELR1 to 0x30, maintain other defaults
++DATA 4 DDR_PHY_DX0GCR4_1 0x0E00BF3C // Set DXREFSSEL,DXREFSSELRANGE,DXREFSEN,DXREFIEN, maintain other defaults
++DATA 4 DDR_PHY_DX1GCR4_1 0x0E00BF3C // Set DXREFSSEL,DXREFSSELRANGE,DXREFSEN,DXREFIEN, maintain other defaults
++DATA 4 DDR_PHY_DX2GCR4_1 0x0E00BF3C // Set DXREFSSEL,DXREFSSELRANGE,DXREFSEN,DXREFIEN, maintain other defaults
++DATA 4 DDR_PHY_DX3GCR4_1 0x0E00BF3C // Set DXREFSSEL,DXREFSSELRANGE,DXREFSEN,DXREFIEN, maintain other defaults
++// Set-up DATX8 DX Control Register 2
++// PREOEX=2.5tCK (0.5 more than MR1), POSOEX=1tCK (0.5 more than in MR3), LPWAKEUP_THRSH=0xA
++DATA 4 DDR_PHY_DX8SLbDXCTL2_1 0x001C1400
++// Set-up DATX8 IO Control Register
++DATA 4 DDR_PHY_DX8SLbIOCR_1 0x79000000 // I/O mode = LPDDR4
++
++#if DDR_TRAIN_IN_DCD
++/* Training done in Firmware, due to DCD size limitation */
++
++// Wait PHY initialization end then launch DRAM initialization
++// Wait for bit 0 of PGSR0 to be '1'
++CHECK_BITS_SET 4 DDR_PHY_PGSR0_0 0x1
++CHECK_BITS_CLR 4 DDR_PHY_PGSR0_0 0x7FF40000 // Check that no error occured
++// Wait for bit 0 of PGSR0 to be '1'
++CHECK_BITS_SET 4 DDR_PHY_PGSR0_1 0x1
++CHECK_BITS_CLR 4 DDR_PHY_PGSR0_1 0x7FF40000 // Check that no error occured
++
++// Launch DRAM 0 initialization (set bit 0)
++DATA 4 DDR_PHY_PIR_0 0x180
++DATA 4 DDR_PHY_PIR_0 0x181
++// Launch DRAM 1 initialization (set bit 0)
++DATA 4 DDR_PHY_PIR_1 0x180
++DATA 4 DDR_PHY_PIR_1 0x181
++
++// DRAM 0 initialization end
++CHECK_BITS_SET 4 DDR_PHY_PGSR0_0 0x1
++CHECK_BITS_CLR 4 DDR_PHY_PGSR0_0 0x7FF40000
++// DRAM 1 initialization end
++CHECK_BITS_SET 4 DDR_PHY_PGSR0_1 0x1
++CHECK_BITS_CLR 4 DDR_PHY_PGSR0_1 0x7FF40000
++
++// Launch a second time DRAM initialization due to following Synopsys PHY bug:
++// Title: "PUB does not program LPDDR4 DRAM MR22 prior to running DRAM ZQ calibration"
++// Workaround: "Run DRAM Initialization twice"
++DATA 4 DDR_PHY_PIR_0 0x100
++DATA 4 DDR_PHY_PIR_0 0x101
++DATA 4 DDR_PHY_PIR_1 0x100
++DATA 4 DDR_PHY_PIR_1 0x101
++
++// Wait (second time) DRAM 0 initialization end
++CHECK_BITS_SET 4 DDR_PHY_PGSR0_0 0x1
++CHECK_BITS_CLR 4 DDR_PHY_PGSR0_0 0x7FF40000
++// Wait (second time) DRAM 1 initialization end
++CHECK_BITS_SET 4 DDR_PHY_PGSR0_1 0x1
++CHECK_BITS_CLR 4 DDR_PHY_PGSR0_1 0x7FF40000
++
++//---------------------------------------------------------------//
++// DATA training
++//---------------------------------------------------------------//
++// configure PHY for data training
++// The following register writes are recommended by SNPS prior to running training
++CLR_BIT 4 DDR_PHY_DQSDR0_0 0x00000001 // Disable drift
++SET_BIT 4 DDR_PHY_PGCR6_0 0x00000001 // Disable VT compensation
++CHECK_BITS_SET 4 DDR_PHY_PGSR1_0 0x40000000 // Disable VT compensation
++SET_BIT 4 DDR_PHY_PGCR1_0 0x00020040 // DISDIC=1; PUBMODE=1
++// Per SNPS initialize BIST registers for VREF training
++DATA 4 DDR_PHY_BISTAR1_0 0x00010100 //BMRANK=1 (maximum rank minus 1); BIST Address Increment: 0x10 (16)
++DATA 4 DDR_PHY_BISTAR2_0 0x700003FF // BMBANK=8; BMCOL=0x400 (limit to min cols in JEDEC)
++DATA 4 DDR_PHY_BISTAR4_0 0x00003FFF // BMROW=0x4000 (limit to min rows in JEDEC)
++
++CLR_BIT 4 DDR_PHY_DQSDR0_1 0x00000001 // Disable drift
++SET_BIT 4 DDR_PHY_PGCR6_1 0x00000001 // Disable VT compensation
++CHECK_BITS_SET 4 DDR_PHY_PGSR1_1 0x40000000 // Disable VT compensation
++SET_BIT 4 DDR_PHY_PGCR1_1 0x00020040 // DISDIC=1; PUBMODE=1
++// Per SNPS initialize BIST registers for VREF training
++DATA 4 DDR_PHY_BISTAR1_1 0x00010100 //BMRANK=1 (maximum rank minus 1); BIST Address Increment: 0x10 (16)
++DATA 4 DDR_PHY_BISTAR2_1 0x700003FF // BMBANK=8; BMCOL=0x400 (limit to min cols in JEDEC)
++DATA 4 DDR_PHY_BISTAR4_1 0x00003FFF // BMROW=0x4000 (limit to min rows in JEDEC)
++
++// Set-up Data Training Configuration Register
++// Note that DTCR0.RFSHDT are set to 0x0 as a workaround for PHY bug (Synopsys
++// case 9001045655: Design limitation in LPDDR4 mode: REFRESH must be disabled during DQS2DQ training).
++// (FYI avoiding refresh during training leads to Denali error (CUMULATIVE_REFRESH_POSTPONE_EXCEEDS_MAX_ALLOWED).
++DATA 4 DDR_PHY_DTCR0_0 0x0000B1CF // Set DTRPTN to 0xF. RFSHDT=0. (note this is for the non DBI setting)
++DATA 4 DDR_PHY_DTCR1_0 0x00030236 // Set RANKEN=3
++DATA 4 DDR_PHY_DTCR0_1 0x0000B1CF // Set DTRPTN to 0xF. RFSHDT=0. (note this is for the non DBI setting)
++DATA 4 DDR_PHY_DTCR1_1 0x00030236 // Set RANKEN=3
++
++// Launch Write leveling
++DATA 4 DDR_PHY_PIR_0 0x200
++DATA 4 DDR_PHY_PIR_0 0x201
++DATA 4 DDR_PHY_PIR_1 0x200
++DATA 4 DDR_PHY_PIR_1 0x201
++// Wait Write leveling to complete
++CHECK_BITS_SET 4 DDR_PHY_PGSR0_0 0x1
++CHECK_BITS_CLR 4 DDR_PHY_PGSR0_0 0x00200000
++CHECK_BITS_SET 4 DDR_PHY_PGSR0_1 0x1
++CHECK_BITS_CLR 4 DDR_PHY_PGSR0_1 0x00200000
++
++// Set DQS/DQSn glitch suppression resistor for training PHY0
++DATA 4 DDR_PHY_DX8SLbDQSCTL_0 0x012640F7
++// Launch Read DQS training
++DATA 4 DDR_PHY_PIR_0 0x400
++DATA 4 DDR_PHY_PIR_0 0x401
++// Set DQS/DQSn glitch suppression resistor for training PHY1
++DATA 4 DDR_PHY_DX8SLbDQSCTL_1 0x012640F7
++// Launch Read DQS training
++DATA 4 DDR_PHY_PIR_1 0x400
++DATA 4 DDR_PHY_PIR_1 0x401
++// Wait Read DQS training to complete PHY0
++CHECK_BITS_SET 4 DDR_PHY_PGSR0_0 0x1
++CHECK_BITS_CLR 4 DDR_PHY_PGSR0_0 0x00400000
++// Remove DQS/DQSn glitch suppression resistor PHY0
++DATA 4 DDR_PHY_DX8SLbDQSCTL_0 0x01264000
++// Wait Read DQS training to complete PHY1
++CHECK_BITS_SET 4 DDR_PHY_PGSR0_1 0x1
++CHECK_BITS_CLR 4 DDR_PHY_PGSR0_1 0x00400000
++// Remove DQS/DQSn glitch suppression resistor PHY1
++DATA 4 DDR_PHY_DX8SLbDQSCTL_1 0x01264000
++
++// DQS2DQ training, Write leveling, Deskew and eye trainings
++DATA 4 DDR_PHY_PIR_0 0x0010F800
++DATA 4 DDR_PHY_PIR_0 0x0010F801
++DATA 4 DDR_PHY_PIR_1 0x0010F800
++DATA 4 DDR_PHY_PIR_1 0x0010F801
++// Wait for training to complete
++CHECK_BITS_SET 4 DDR_PHY_PGSR0_0 0x1
++CHECK_BITS_CLR 4 DDR_PHY_PGSR0_0 0x7FF40000
++CHECK_BITS_SET 4 DDR_PHY_PGSR0_1 0x1
++CHECK_BITS_CLR 4 DDR_PHY_PGSR0_1 0x7FF40000
++
++// Launch VREF training
++DATA 4 DDR_PHY_PIR_0 0x00020000
++DATA 4 DDR_PHY_PIR_0 0x00020001
++DATA 4 DDR_PHY_PIR_1 0x00020000
++DATA 4 DDR_PHY_PIR_1 0x00020001
++// Wait for training to complete
++CHECK_BITS_SET 4 DDR_PHY_PGSR0_0 0x1
++CHECK_BITS_CLR 4 DDR_PHY_PGSR0_0 0x00080000
++CHECK_BITS_SET 4 DDR_PHY_PGSR0_1 0x1
++CHECK_BITS_CLR 4 DDR_PHY_PGSR0_1 0x00080000
++
++//Re-allow uMCTL2 to send commands to DDR
++CLR_BIT 4 DDR_PHY_PGCR1_0 0x00020040 // DISDIC=0, PUBMODE=0
++CLR_BIT 4 DDR_PHY_PGCR1_1 0x00020040 // DISDIC=0, PUBMODE=0
++// DISDIC=0, PUBMODE=0
++
++//DQS Drift Registers PHY0
++CLR_BIT 4 DDR_PHY_DX0GCR3_0 0x08000000
++CLR_BIT 4 DDR_PHY_DX1GCR3_0 0x08000000
++CLR_BIT 4 DDR_PHY_DX2GCR3_0 0x08000000
++CLR_BIT 4 DDR_PHY_DX3GCR3_0 0x08000000
++// Enable DQS drift detection PHY0
++DATA 4 DDR_PHY_DQSDR0_0 0x20188005
++DATA 4 DDR_PHY_DQSDR1_0 0xA8AA0000
++DATA 4 DDR_PHY_DQSDR2_0 0x00070200
++//DQS Drift Registers PHY1
++CLR_BIT 4 DDR_PHY_DX0GCR3_1 0x08000000
++CLR_BIT 4 DDR_PHY_DX1GCR3_1 0x08000000
++CLR_BIT 4 DDR_PHY_DX2GCR3_1 0x08000000
++CLR_BIT 4 DDR_PHY_DX3GCR3_1 0x08000000
++// Enable DQS drift detection PHY1
++DATA 4 DDR_PHY_DQSDR0_1 0x20188005
++DATA 4 DDR_PHY_DQSDR1_1 0xA8AA0000
++DATA 4 DDR_PHY_DQSDR2_1 0x00070200
++
++// Enable VT compensation
++CLR_BIT 4 DDR_PHY_PGCR6_0 0x1
++CLR_BIT 4 DDR_PHY_PGCR6_1 0x1
++
++//Check that controller is ready to operate
++CHECK_BITS_SET 4 DDRC_STAT_0 0x1
++CHECK_BITS_SET 4 DDRC_STAT_1 0x1
++
++// Disable drift, not needed for 800MHz
++CLR_BIT 4 DDR_PHY_DQSDR0_0 0x1
++CLR_BIT 4 DDR_PHY_DQSDR0_1 0x1
++#endif
+--
+2.13.6
+
diff --git a/recipes-bsp/imx-mkimage/imx-boot_%.bbappend b/recipes-bsp/imx-mkimage/imx-boot_%.bbappend
index d568a38..74555fa 100644
--- a/recipes-bsp/imx-mkimage/imx-boot_%.bbappend
+++ b/recipes-bsp/imx-mkimage/imx-boot_%.bbappend
@@ -1,15 +1,22 @@
SRCBRANCH = "imx_4.14.78_1.0.0_ga"
SRCREV = "2cf091c075ea1950afa22a56e224dc4e448db542"
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+SRC_URI += " \
+ file://0001-add-board-support-for-DCD-memory-timings.patch \
+ file://0002-add-memory-timings-for-Apalis-iMX8.patch \
+"
+
# Cope with i.MX8 / i.MX8X A0 Silicon DCD name
-DCD_NAME_mx8qma0 = "imx8qm_dcd.cfg.tmp"
+DCD_NAME_mx8qma0 = "imx8qm_*dcd.cfg.tmp"
+export DCD_BOARD = "apalis-imx8"
DCD_COPY = "false"
DCD_COPY_mx8qma0 = "true"
deploy_mx8() {
install -d ${DEPLOYDIR}/${BOOT_TOOLS}
if [ "${DCD_COPY}" = "true" ]; then
- install -m 0644 ${BOOT_STAGING}/${DCD_NAME} ${DEPLOYDIR}/${BOOT_TOOLS}
+ install -m 0644 ${BOOT_STAGING}/${DCD_NAME} ${DEPLOYDIR}/${BOOT_TOOLS}
fi
install -m 0644 ${BOOT_STAGING}/mx8qm-ahab-container.img ${DEPLOYDIR}/${BOOT_TOOLS}
install -m 0755 ${S}/${TOOLS_NAME} ${DEPLOYDIR}/${BOOT_TOOLS}