apalis/colibri-t20 -t30: drop machines

These machines use an old Nvidia provided downstream kernel 3.1.10.
They are no longer compatible with more recent sysroot components,
e.g. libc, xserver et. al.

The maintenance burden to keep the userspace components in their old version
becomes simply too high. Keep using the rocko based 2.8 BSP for these machines.

Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>

5 files changed, 0 insertions, 63 deletions

diff --git a/recipes-bsp/u-boot/files/apalis-t30/Apalis_T30_2GB_800Mhz.bct b/recipes-bsp/u-boot/files/apalis-t30/Apalis_T30_2GB_800Mhz.bct
deleted file mode 100644
index f228cd2..0000000
--- a/recipes-bsp/u-boot/files/apalis-t30/Apalis_T30_2GB_800Mhz.bct
+++ /dev/null
diff --git a/recipes-bsp/u-boot/files/apalis-t30/apalis_t30.img.cfg b/recipes-bsp/u-boot/files/apalis-t30/apalis_t30.img.cfg
deleted file mode 100644
index 6fbdc0d..0000000
--- a/recipes-bsp/u-boot/files/apalis-t30/apalis_t30.img.cfg
+++ /dev/null
@@ -1,22 +0,0 @@
-# Copyright (C) 2014 Toradex, Inc.
-#
-# This software is provided 'as-is', without any express or implied
-# warranty. In no event will the authors be held liable for any damages
-# arising from the use of this software.
-#
-# Permission is granted to anyone to use this software for any purpose,
-# including commercial applications, and to alter it and redistribute it
-# freely, subject to the following restrictions:
-#
-# 1. The origin of this software must not be misrepresented; you must not
-#    claim that you wrote the original software. If you use this software
-#    in a product, an acknowledgment in the product documentation would be
-#    appreciated but is not required.
-# 2. Altered source versions must be plainly marked as such, and must not be
-#    misrepresented as being the original software.
-# 3. This notice may not be removed or altered from any source distribution.
-
-Version       = 0x00020001;
-Bctcopy       = 1;
-Bctfile       = Apalis_T30_2GB_800Mhz.bct;
-BootLoader    = u-boot-dtb-tegra.bin,0x80108000,0x80108000,Complete;
diff --git a/recipes-bsp/u-boot/files/apalis-t30/fw_env.config b/recipes-bsp/u-boot/files/apalis-t30/fw_env.config
deleted file mode 100644
index d2be4ee..0000000
--- a/recipes-bsp/u-boot/files/apalis-t30/fw_env.config
+++ /dev/null
@@ -1,15 +0,0 @@
-# Configuration file for fw_(printenv/setenv) utility.
-# Up to two entries are valid, in this case the redundant
-# environment sector is assumed present.
-# Device offset must be prefixed with 0x to be parsed as a hexadecimal value.
-# On a block device a negative offset is treated as a backwards offset from the
-# end of the device/partition, rather than a forwards offset from the start.
-
-# Colibri T30/Apalis T30
-# U-Boot environment is stored at the end of the first eMMC boot partition
-# hence use a negative value. The environment is just in front of the config
-# block which occupies the last sector (hence -0x200)
-
-# Block device name	Device offset	Env. size
-/dev/mmcblk0boot0	-0x2200		0x2000
-
diff --git a/recipes-bsp/u-boot/files/tegra2/fw_env.config b/recipes-bsp/u-boot/files/tegra2/fw_env.config
deleted file mode 100644
index 9d00835..0000000
--- a/recipes-bsp/u-boot/files/tegra2/fw_env.config
+++ /dev/null
@@ -1,11 +0,0 @@
-# Configuration file for fw_(printenv/setenv) utility.
-# Up to two entries are valid, in this case the redundant
-# environment sector is assumed present.
-# Notice, that the "Number of sectors" is not required on NOR and SPI-dataflash.
-# Futhermore, if the Flash sector size is ommitted, this value is assumed to
-# be the same as the Environment size, which is valid for NOR and SPI-dataflash
-
-# MTD device name	Device offset	Env. size	Flash sector size	Number of sectors
-#Colibri T20: flash sector size depends on module type and version
-#/dev/mtd3		0x00000000	0x00001000	0x00040000		1
-
diff --git a/recipes-bsp/u-boot/files/tegra3/fw_env.config b/recipes-bsp/u-boot/files/tegra3/fw_env.config
deleted file mode 100644
index d2be4ee..0000000
--- a/recipes-bsp/u-boot/files/tegra3/fw_env.config
+++ /dev/null
@@ -1,15 +0,0 @@
-# Configuration file for fw_(printenv/setenv) utility.
-# Up to two entries are valid, in this case the redundant
-# environment sector is assumed present.
-# Device offset must be prefixed with 0x to be parsed as a hexadecimal value.
-# On a block device a negative offset is treated as a backwards offset from the
-# end of the device/partition, rather than a forwards offset from the start.
-
-# Colibri T30/Apalis T30
-# U-Boot environment is stored at the end of the first eMMC boot partition
-# hence use a negative value. The environment is just in front of the config
-# block which occupies the last sector (hence -0x200)
-
-# Block device name	Device offset	Env. size
-/dev/mmcblk0boot0	-0x2200		0x2000
-