xorg-xserver: mv all files into recipes-graphics/xorg-xserver/

Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Stefan Agner <stefan.agner@toradex.com>

7 files changed, 456 insertions, 0 deletions

diff --git a/recipes-graphics/xorg-xserver/files/crash-hack.patch b/recipes-graphics/xorg-xserver/files/crash-hack.patch
new file mode 100644
index 0000000..0053a10
--- /dev/null
+++ b/recipes-graphics/xorg-xserver/files/crash-hack.patch
@@ -0,0 +1,11 @@
+--- xorg-server-1.11.2/miext/damage/damage.c~	2011-04-24 06:54:03.000000000 +0200
++++ xorg-server-1.11.2/miext/damage/damage.c	2012-07-27 12:12:00.012473812 +0200
+@@ -596,6 +596,8 @@
+     ScreenPtr		pScreen = pDst->pDrawable->pScreen;
+     PictureScreenPtr	ps = GetPictureScreen(pScreen);
+     damageScrPriv(pScreen);
++    //ugly hack, the xserver crashes when gtk programs use some fancy font rendering, this prevents this
++    maskFormat = 0;
+ 
+     if (checkPictureDamage (pDst))
+     {
diff --git a/recipes-graphics/xorg-xserver/xserver-xf86-config/apalis-t30/xorg.conf b/recipes-graphics/xorg-xserver/xserver-xf86-config/apalis-t30/xorg.conf
new file mode 100644
index 0000000..fbe1f98
--- /dev/null
+++ b/recipes-graphics/xorg-xserver/xserver-xf86-config/apalis-t30/xorg.conf
@@ -0,0 +1,135 @@
+# This is an optimised configuration for Xorg on the Toradex Tegra based Apalis
+# and Colibri modules
+#
+# In order to disable unused monitor outputs, apply the Option "Ignore" "true"
+# (in the monitor section). By defining a particular resolution one can choose
+# a preferred mode for all monitors. However, this mode is only used if the
+# monitor reports it as being supported (via EDID on DVI-D aka HDMI).
+#
+
+# Please refer to the xorg.conf man page for more configuration
+# options provided by the X server, including display-related options
+# provided by RandR 1.2 and higher.
+
+# Disable extensions not useful on Tegra.
+Section "Module"
+    Disable     "dri"
+    Disable     "dri2"
+    Disable     "glx"
+    SubSection  "extmod"
+        Option  "omit xfree86-dga"
+    EndSubSection
+EndSection
+
+Section "Device"
+    Identifier  "Tegra"
+    Driver      "tegra"
+
+# VirtualDesktop indicates which virtual desktops should be used by X.
+# X will use the specified virtual desktop *and* the next one.  In
+# order for an external app to share a display with the X server, it
+# needs to use the same virtual desktop.  Valid values are integers 0
+# (default) or 1.
+
+#    Option      "VirtualDesktop" "1"
+
+# OverlayDepth is a 32-bit integer which is used to control overlay
+# stacking order.  The overlay with the lowest depth is in front of
+# all others.  This value has meaning only when multiple overlays are
+# present on a display.
+
+#    Option      "OverlayDepth" "255"
+
+# OverlayCombineMode determines how the X overlay is combined with the
+# overlay behind it during scanout.  Available modes are: Opaque
+# (default), SourceAlphaBlend, and PremultSourceAlphaBlend.  This
+# value has meaning only when an external process has created a
+# display which is behind the X server.
+
+#    Option      "OverlayCombineMode" "PremultSourceAlphaBlend"
+
+# ARGBHWCursor controls whether the X driver uses an overlay to
+# display 32-bit "true-color" cursors, or whether such cursors are
+# emulated in software.  Valid values are "true" (default) to enable
+# hardware cursors, and "false" to disable them.
+
+    Option      "ARGBHWCursor" "false"
+
+# Use monitor section with identifier, enables explicit disabling
+    Option      "Monitor-LVDS-1" "LVDS"
+    Option      "Monitor-HDMI-1" "HDMI"
+EndSection
+
+Section "ServerFlags"
+
+    Option "DefaultServerLayout" "Default Layout"
+# Set the basic blanking screen saver timeout in minutes.  0 to disable.
+
+    Option      "blank time"    "0"
+
+# Set the DPMS timeouts.  These are set here because they are global
+# rather than screen-specific.  These settings alone don't enable DPMS.
+# It is enabled per-screen (or per-monitor), and even then only when
+# the driver supports it.
+
+    Option      "standby time"  "0"
+    Option      "suspend time"  "0"
+    Option      "off time"      "0"
+EndSection
+
+Section "Monitor"
+
+    Identifier "HDMI"
+    Option     "Ignore" "false"
+    Option     "DPMS" "off"
+
+# Default orientation
+#    Option     "AboveOf" "LVDS"
+#    Option     "Position" "0 0"
+
+# Explicitly choose a Resolution (check xrandr for available modes)
+#    Option     "PreferredMode" "1280x720"
+
+EndSection
+
+Section "Monitor"
+
+    Identifier "LVDS"
+    Option     "Ignore" "false"
+    Option     "DPMS" "off"
+
+# Note: It is not possible to use explicit modes here as the mode is inherited
+# from the Linux framebuffer
+# Check Framebuffer documentation:
+# http://developer.toradex.com/knowledge-base/framebuffer-(linux)
+
+EndSection
+
+Section "Screen"
+# NVIDIA uses only one screen, even in dual head mode
+# the gluing logic is in the device section
+
+    Identifier  "Common Screen"
+    Device      "Tegra"
+
+# This is the primary monitor
+    Monitor     "LVDS"
+
+    DefaultDepth 16
+
+EndSection
+
+Section "ServerLayout"
+	Identifier  "Default Layout"
+
+	Screen "Common Screen"
+EndSection
+
+Section "InputClass"
+
+	Identifier "Fusion 7/10"
+	Driver "evdev"
+	MatchProduct "fusion_F0710A"
+	MatchDevicePath "/dev/input/event*"
+
+EndSection
diff --git a/recipes-graphics/xorg-xserver/xserver-xf86-config/apalis-tk1/xorg.conf b/recipes-graphics/xorg-xserver/xserver-xf86-config/apalis-tk1/xorg.conf
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/recipes-graphics/xorg-xserver/xserver-xf86-config/apalis-tk1/xorg.conf
diff --git a/recipes-graphics/xorg-xserver/xserver-xf86-config/colibri-t20/xorg.conf b/recipes-graphics/xorg-xserver/xserver-xf86-config/colibri-t20/xorg.conf
new file mode 100644
index 0000000..fbe1f98
--- /dev/null
+++ b/recipes-graphics/xorg-xserver/xserver-xf86-config/colibri-t20/xorg.conf
@@ -0,0 +1,135 @@
+# This is an optimised configuration for Xorg on the Toradex Tegra based Apalis
+# and Colibri modules
+#
+# In order to disable unused monitor outputs, apply the Option "Ignore" "true"
+# (in the monitor section). By defining a particular resolution one can choose
+# a preferred mode for all monitors. However, this mode is only used if the
+# monitor reports it as being supported (via EDID on DVI-D aka HDMI).
+#
+
+# Please refer to the xorg.conf man page for more configuration
+# options provided by the X server, including display-related options
+# provided by RandR 1.2 and higher.
+
+# Disable extensions not useful on Tegra.
+Section "Module"
+    Disable     "dri"
+    Disable     "dri2"
+    Disable     "glx"
+    SubSection  "extmod"
+        Option  "omit xfree86-dga"
+    EndSubSection
+EndSection
+
+Section "Device"
+    Identifier  "Tegra"
+    Driver      "tegra"
+
+# VirtualDesktop indicates which virtual desktops should be used by X.
+# X will use the specified virtual desktop *and* the next one.  In
+# order for an external app to share a display with the X server, it
+# needs to use the same virtual desktop.  Valid values are integers 0
+# (default) or 1.
+
+#    Option      "VirtualDesktop" "1"
+
+# OverlayDepth is a 32-bit integer which is used to control overlay
+# stacking order.  The overlay with the lowest depth is in front of
+# all others.  This value has meaning only when multiple overlays are
+# present on a display.
+
+#    Option      "OverlayDepth" "255"
+
+# OverlayCombineMode determines how the X overlay is combined with the
+# overlay behind it during scanout.  Available modes are: Opaque
+# (default), SourceAlphaBlend, and PremultSourceAlphaBlend.  This
+# value has meaning only when an external process has created a
+# display which is behind the X server.
+
+#    Option      "OverlayCombineMode" "PremultSourceAlphaBlend"
+
+# ARGBHWCursor controls whether the X driver uses an overlay to
+# display 32-bit "true-color" cursors, or whether such cursors are
+# emulated in software.  Valid values are "true" (default) to enable
+# hardware cursors, and "false" to disable them.
+
+    Option      "ARGBHWCursor" "false"
+
+# Use monitor section with identifier, enables explicit disabling
+    Option      "Monitor-LVDS-1" "LVDS"
+    Option      "Monitor-HDMI-1" "HDMI"
+EndSection
+
+Section "ServerFlags"
+
+    Option "DefaultServerLayout" "Default Layout"
+# Set the basic blanking screen saver timeout in minutes.  0 to disable.
+
+    Option      "blank time"    "0"
+
+# Set the DPMS timeouts.  These are set here because they are global
+# rather than screen-specific.  These settings alone don't enable DPMS.
+# It is enabled per-screen (or per-monitor), and even then only when
+# the driver supports it.
+
+    Option      "standby time"  "0"
+    Option      "suspend time"  "0"
+    Option      "off time"      "0"
+EndSection
+
+Section "Monitor"
+
+    Identifier "HDMI"
+    Option     "Ignore" "false"
+    Option     "DPMS" "off"
+
+# Default orientation
+#    Option     "AboveOf" "LVDS"
+#    Option     "Position" "0 0"
+
+# Explicitly choose a Resolution (check xrandr for available modes)
+#    Option     "PreferredMode" "1280x720"
+
+EndSection
+
+Section "Monitor"
+
+    Identifier "LVDS"
+    Option     "Ignore" "false"
+    Option     "DPMS" "off"
+
+# Note: It is not possible to use explicit modes here as the mode is inherited
+# from the Linux framebuffer
+# Check Framebuffer documentation:
+# http://developer.toradex.com/knowledge-base/framebuffer-(linux)
+
+EndSection
+
+Section "Screen"
+# NVIDIA uses only one screen, even in dual head mode
+# the gluing logic is in the device section
+
+    Identifier  "Common Screen"
+    Device      "Tegra"
+
+# This is the primary monitor
+    Monitor     "LVDS"
+
+    DefaultDepth 16
+
+EndSection
+
+Section "ServerLayout"
+	Identifier  "Default Layout"
+
+	Screen "Common Screen"
+EndSection
+
+Section "InputClass"
+
+	Identifier "Fusion 7/10"
+	Driver "evdev"
+	MatchProduct "fusion_F0710A"
+	MatchDevicePath "/dev/input/event*"
+
+EndSection
diff --git a/recipes-graphics/xorg-xserver/xserver-xf86-config/colibri-t30/xorg.conf b/recipes-graphics/xorg-xserver/xserver-xf86-config/colibri-t30/xorg.conf
new file mode 100644
index 0000000..fbe1f98
--- /dev/null
+++ b/recipes-graphics/xorg-xserver/xserver-xf86-config/colibri-t30/xorg.conf
@@ -0,0 +1,135 @@
+# This is an optimised configuration for Xorg on the Toradex Tegra based Apalis
+# and Colibri modules
+#
+# In order to disable unused monitor outputs, apply the Option "Ignore" "true"
+# (in the monitor section). By defining a particular resolution one can choose
+# a preferred mode for all monitors. However, this mode is only used if the
+# monitor reports it as being supported (via EDID on DVI-D aka HDMI).
+#
+
+# Please refer to the xorg.conf man page for more configuration
+# options provided by the X server, including display-related options
+# provided by RandR 1.2 and higher.
+
+# Disable extensions not useful on Tegra.
+Section "Module"
+    Disable     "dri"
+    Disable     "dri2"
+    Disable     "glx"
+    SubSection  "extmod"
+        Option  "omit xfree86-dga"
+    EndSubSection
+EndSection
+
+Section "Device"
+    Identifier  "Tegra"
+    Driver      "tegra"
+
+# VirtualDesktop indicates which virtual desktops should be used by X.
+# X will use the specified virtual desktop *and* the next one.  In
+# order for an external app to share a display with the X server, it
+# needs to use the same virtual desktop.  Valid values are integers 0
+# (default) or 1.
+
+#    Option      "VirtualDesktop" "1"
+
+# OverlayDepth is a 32-bit integer which is used to control overlay
+# stacking order.  The overlay with the lowest depth is in front of
+# all others.  This value has meaning only when multiple overlays are
+# present on a display.
+
+#    Option      "OverlayDepth" "255"
+
+# OverlayCombineMode determines how the X overlay is combined with the
+# overlay behind it during scanout.  Available modes are: Opaque
+# (default), SourceAlphaBlend, and PremultSourceAlphaBlend.  This
+# value has meaning only when an external process has created a
+# display which is behind the X server.
+
+#    Option      "OverlayCombineMode" "PremultSourceAlphaBlend"
+
+# ARGBHWCursor controls whether the X driver uses an overlay to
+# display 32-bit "true-color" cursors, or whether such cursors are
+# emulated in software.  Valid values are "true" (default) to enable
+# hardware cursors, and "false" to disable them.
+
+    Option      "ARGBHWCursor" "false"
+
+# Use monitor section with identifier, enables explicit disabling
+    Option      "Monitor-LVDS-1" "LVDS"
+    Option      "Monitor-HDMI-1" "HDMI"
+EndSection
+
+Section "ServerFlags"
+
+    Option "DefaultServerLayout" "Default Layout"
+# Set the basic blanking screen saver timeout in minutes.  0 to disable.
+
+    Option      "blank time"    "0"
+
+# Set the DPMS timeouts.  These are set here because they are global
+# rather than screen-specific.  These settings alone don't enable DPMS.
+# It is enabled per-screen (or per-monitor), and even then only when
+# the driver supports it.
+
+    Option      "standby time"  "0"
+    Option      "suspend time"  "0"
+    Option      "off time"      "0"
+EndSection
+
+Section "Monitor"
+
+    Identifier "HDMI"
+    Option     "Ignore" "false"
+    Option     "DPMS" "off"
+
+# Default orientation
+#    Option     "AboveOf" "LVDS"
+#    Option     "Position" "0 0"
+
+# Explicitly choose a Resolution (check xrandr for available modes)
+#    Option     "PreferredMode" "1280x720"
+
+EndSection
+
+Section "Monitor"
+
+    Identifier "LVDS"
+    Option     "Ignore" "false"
+    Option     "DPMS" "off"
+
+# Note: It is not possible to use explicit modes here as the mode is inherited
+# from the Linux framebuffer
+# Check Framebuffer documentation:
+# http://developer.toradex.com/knowledge-base/framebuffer-(linux)
+
+EndSection
+
+Section "Screen"
+# NVIDIA uses only one screen, even in dual head mode
+# the gluing logic is in the device section
+
+    Identifier  "Common Screen"
+    Device      "Tegra"
+
+# This is the primary monitor
+    Monitor     "LVDS"
+
+    DefaultDepth 16
+
+EndSection
+
+Section "ServerLayout"
+	Identifier  "Default Layout"
+
+	Screen "Common Screen"
+EndSection
+
+Section "InputClass"
+
+	Identifier "Fusion 7/10"
+	Driver "evdev"
+	MatchProduct "fusion_F0710A"
+	MatchDevicePath "/dev/input/event*"
+
+EndSection
diff --git a/recipes-graphics/xorg-xserver/xserver-xf86-config/colibri-vf/xorg.conf b/recipes-graphics/xorg-xserver/xserver-xf86-config/colibri-vf/xorg.conf
new file mode 100644
index 0000000..ee77e84
--- /dev/null
+++ b/recipes-graphics/xorg-xserver/xserver-xf86-config/colibri-vf/xorg.conf
@@ -0,0 +1,39 @@
+# Default Xorg configuration for Toradex Colibri VF50/VF61 modules
+# (Freescale/NXP Vybrid based modules)
+#
+# This configuration uses the Xorg modesetting DDX driver, which requires
+# the DRM based DCU kernel driver (CONFIG_DRM_FSL_DCU)
+#
+
+Section "Device"
+	Identifier  "FSL-DCU"
+	Driver      "modesetting"
+	Option      "kmsdev" "/dev/dri/card0"
+EndSection
+
+Section "Monitor"
+	Identifier  "LCD"
+	Option      "DPMS" "off"
+EndSection
+
+Section "Screen"
+	Identifier  "Main"
+	Device      "FSL-DCU"
+	Monitor     "LCD"
+	DefaultDepth 16
+EndSection
+
+Section "ServerFlags"
+	Option "BlankTime"  "0"
+	Option "StandbyTime"  "0"
+	Option "SuspendTime"  "0"
+	Option "OffTime"  "0"
+EndSection
+
+Section "InputClass"
+	Identifier "Fusion 7/10"
+	Driver "evdev"
+	MatchProduct "fusion_F0710A"
+	MatchDevicePath "/dev/input/event*"
+EndSection
+
diff --git a/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend b/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend
new file mode 100644
index 0000000..3feb3b1
--- /dev/null
+++ b/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend
@@ -0,0 +1 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/xserver-xf86-config:"