5 files changed, 0 insertions, 63 deletions
diff --git a/recipes-bsp/u-boot/files/apalis-t30/Apalis_T30_2GB_800Mhz.bct b/recipes-bsp/u-boot/files/apalis-t30/Apalis_T30_2GB_800Mhz.bct
deleted file mode 100644
index f228cd2..0000000
--- a/recipes-bsp/u-boot/files/apalis-t30/Apalis_T30_2GB_800Mhz.bct
+++ /dev/null
diff --git a/recipes-bsp/u-boot/files/apalis-t30/apalis_t30.img.cfg b/recipes-bsp/u-boot/files/apalis-t30/apalis_t30.img.cfg
deleted file mode 100644
index 6fbdc0d..0000000
--- a/recipes-bsp/u-boot/files/apalis-t30/apalis_t30.img.cfg
+++ /dev/null
@@ -1,22 +0,0 @@
-# Copyright (C) 2014 Toradex, Inc.
-#
-# This software is provided 'as-is', without any express or implied
-# warranty. In no event will the authors be held liable for any damages
-# arising from the use of this software.
-#
-# Permission is granted to anyone to use this software for any purpose,
-# including commercial applications, and to alter it and redistribute it
-# freely, subject to the following restrictions:
-#
-# 1. The origin of this software must not be misrepresented; you must not
-#    claim that you wrote the original software. If you use this software
-#    in a product, an acknowledgment in the product documentation would be
-#    appreciated but is not required.
-# 2. Altered source versions must be plainly marked as such, and must not be
-#    misrepresented as being the original software.
-# 3. This notice may not be removed or altered from any source distribution.
-
-Version       = 0x00020001;
-Bctcopy       = 1;
-Bctfile       = Apalis_T30_2GB_800Mhz.bct;
-BootLoader    = u-boot-dtb-tegra.bin,0x80108000,0x80108000,Complete;
diff --git a/recipes-bsp/u-boot/files/apalis-t30/fw_env.config b/recipes-bsp/u-boot/files/apalis-t30/fw_env.config
deleted file mode 100644
index d2be4ee..0000000
--- a/recipes-bsp/u-boot/files/apalis-t30/fw_env.config
+++ /dev/null
@@ -1,15 +0,0 @@
-# Configuration file for fw_(printenv/setenv) utility.
-# Up to two entries are valid, in this case the redundant
-# environment sector is assumed present.
-# Device offset must be prefixed with 0x to be parsed as a hexadecimal value.
-# On a block device a negative offset is treated as a backwards offset from the
-# end of the device/partition, rather than a forwards offset from the start.
-
-# Colibri T30/Apalis T30
-# U-Boot environment is stored at the end of the first eMMC boot partition
-# hence use a negative value. The environment is just in front of the config
-# block which occupies the last sector (hence -0x200)
-
-# Block device name	Device offset	Env. size
-/dev/mmcblk0boot0	-0x2200		0x2000
-
diff --git a/recipes-bsp/u-boot/files/tegra2/fw_env.config b/recipes-bsp/u-boot/files/tegra2/fw_env.config
deleted file mode 100644
index 9d00835..0000000
--- a/recipes-bsp/u-boot/files/tegra2/fw_env.config
+++ /dev/null
@@ -1,11 +0,0 @@
-# Configuration file for fw_(printenv/setenv) utility.
-# Up to two entries are valid, in this case the redundant
-# environment sector is assumed present.
-# Notice, that the "Number of sectors" is not required on NOR and SPI-dataflash.
-# Futhermore, if the Flash sector size is ommitted, this value is assumed to
-# be the same as the Environment size, which is valid for NOR and SPI-dataflash
-
-# MTD device name	Device offset	Env. size	Flash sector size	Number of sectors
-#Colibri T20: flash sector size depends on module type and version
-#/dev/mtd3		0x00000000	0x00001000	0x00040000		1
-
diff --git a/recipes-bsp/u-boot/files/tegra3/fw_env.config b/recipes-bsp/u-boot/files/tegra3/fw_env.config
deleted file mode 100644
index d2be4ee..0000000
--- a/recipes-bsp/u-boot/files/tegra3/fw_env.config
+++ /dev/null
@@ -1,15 +0,0 @@
-# Configuration file for fw_(printenv/setenv) utility.
-# Up to two entries are valid, in this case the redundant
-# environment sector is assumed present.
-# Device offset must be prefixed with 0x to be parsed as a hexadecimal value.
-# On a block device a negative offset is treated as a backwards offset from the
-# end of the device/partition, rather than a forwards offset from the start.
-
-# Colibri T30/Apalis T30
-# U-Boot environment is stored at the end of the first eMMC boot partition
-# hence use a negative value. The environment is just in front of the config
-# block which occupies the last sector (hence -0x200)
-
-# Block device name	Device offset	Env. size
-/dev/mmcblk0boot0	-0x2200		0x2000
-