colibri_imx6: add configuration for tezi

Modify configuration for Tezi:
- Enable SDP in SPL and U-Boot
- Enable FDT relocation (in-place is causing issues with FIT images)
- Remove video output
- Use distroboot by default
- Boot from external SD cards by default
- Disable USB PID from config block (otherwise recovery mode download
  in U-Boot stage fails)

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

2 files changed, 72 insertions, 6 deletions

diff --git a/configs/colibri_imx6_tezi_defconfig b/configs/colibri_imx6_tezi_defconfig
new file mode 100644
index 0000000000..ce20822c8d
--- /dev/null
+++ b/configs/colibri_imx6_tezi_defconfig
@@ -0,0 +1,56 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MX6=y
+CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+# CONFIG_TDX_CFG_BLOCK_USB_GADGET_PID is not set
+CONFIG_TDX_EASY_INSTALLER=y
+CONFIG_TARGET_COLIBRI_IMX6=y
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_FIT=y
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6DL"
+CONFIG_BOOTDELAY=1
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_SPL=y
+CONFIG_SPL_DMA_SUPPORT=y
+CONFIG_SPL_USB_HOST_SUPPORT=y
+CONFIG_SPL_USB_GADGET_SUPPORT=y
+CONFIG_SPL_USB_SDP_SUPPORT=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="Colibri iMX6 # "
+CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_IMI is not set
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_XIMG is not set
+CONFIG_CMD_ASKENV=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_DFU=y
+CONFIG_CMD_USB_SDP=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_CI_UDC=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_G_DNL_MANUFACTURER="Toradex"
+CONFIG_G_DNL_VENDOR_NUM=0x1b67
+CONFIG_G_DNL_PRODUCT_NUM=0x4000
+CONFIG_OF_LIBFDT=y
+CONFIG_OF_LIBFDT_OVERLAY=y
+# CONFIG_EFI_LOADER is not set
diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h
index f1fd5b422e..868a7d466c 100644
--- a/include/configs/colibri_imx6.h
+++ b/include/configs/colibri_imx6.h
@@ -116,9 +116,10 @@
 #define CONFIG_MXC_GPIO
 
 /* Framebuffer and LCD */
+#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
+#ifdef CONFIG_VIDEO
 #define CONFIG_VIDEO_IPUV3
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_SPLASH_SCREEN_ALIGN
@@ -131,6 +132,7 @@
 #define CONFIG_IMX_HDMI
 #define CONFIG_IMX_VIDEO_SKIP
 #define CONFIG_CMD_BMP
+#endif /* CONFIG_VIDEO */
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
@@ -152,10 +154,19 @@
 #define CONFIG_LOADADDR			0x12000000
 #define CONFIG_SYS_TEXT_BASE		0x17800000
 
+#ifdef CONFIG_TDX_EASY_INSTALLER
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd"
+#else
+#define CONFIG_BOOTCOMMAND "run emmcboot; echo; echo emmcboot failed; " \
+		"run distro_bootcmd; usb start; " \
+		"setenv stdout serial,vga; setenv stdin serial,usbkbd"
+#endif
+
 #ifndef CONFIG_SPL_BUILD
 #define BOOTENV_RUN_NET_USB_START ""
 #define BOOT_TARGET_DEVICES(func) \
         func(MMC, mmc, 1) \
+        func(MMC, mmc, 0) \
         func(USB, usb, 0) \
         func(DHCP, dhcp, na)
 #include <config_distro_bootcmd.h>
@@ -188,7 +199,6 @@
 #define MEM_LAYOUT_ENV_SETTINGS \
 	"bootm_size=0x10000000\0" \
 	"fdt_addr_r=0x12000000\0" \
-	"fdt_high=0xffffffff\0" \
 	"initrd_high=0xffffffff\0" \
 	"kernel_addr_r=0x11000000\0" \
 	"pxefile_addr_r=0x17100000\0" \
@@ -231,10 +241,6 @@
 #define FDT_FILE "imx6dl-colibri-eval-v3.dtb"
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	BOOTENV \
-	"bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \
-		"run distro_bootcmd ; " \
-		"usb start ;" \
-		"setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
 	"boot_file=zImage\0" \
 	"console=ttymxc0\0" \
 	"defargs=galcore.contiguousSize=50331648 user_debug=30\0" \
@@ -297,7 +303,11 @@
 
 #define CONFIG_ENV_SIZE			(8 * 1024)
 
+#ifdef CONFIG_TDX_EASY_INSTALLER
+#define CONFIG_ENV_IS_NOWHERE
+#else
 #define CONFIG_ENV_IS_IN_MMC
+#endif
 
 #if defined(CONFIG_ENV_IS_IN_MMC)
 /* Environment in eMMC, before config block at the end of 1st "boot sector" */