summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorwdenk <wdenk>2003-03-06 13:39:27 +0000
committerwdenk <wdenk>2003-03-06 13:39:27 +0000
commit47cd00fa707af9de76408b69d3e911717dbbfab1 (patch)
treedd887729a4eaf11e7a225563f4c604ef4b7d695b
parentdb2f721ffcf9693086a7e5c6c7015f2019e7f52e (diff)
* Patches by Robert Schwebel, 06 Mar 2003:
- fix bug in BOOTP code (must use NetCopyIP) - update of CSB226 port - clear BSS segment on XScale - added support for i2c_init_board() function - update to the Innokom plattform * Extend support for redundand environments for configurations where environment size < sector size
-rw-r--r--CHANGELOG10
-rw-r--r--README13
-rw-r--r--board/cradle/u-boot.lds2
-rw-r--r--board/csb226/csb226.c24
-rw-r--r--board/csb226/flash.c382
-rw-r--r--board/csb226/memsetup.S32
-rw-r--r--board/csb226/u-boot.lds2
-rw-r--r--board/innokom/flash.c258
-rw-r--r--board/innokom/innokom.c50
-rw-r--r--board/innokom/memsetup.S38
-rw-r--r--board/innokom/u-boot.lds2
-rw-r--r--board/lubbock/u-boot.lds2
-rw-r--r--board/mpl/common/common_util.c2
-rw-r--r--board/trab/u-boot.lds2
-rw-r--r--common/console.c2
-rw-r--r--common/env_flash.c43
-rw-r--r--cpu/mpc824x/drivers/i2c/i2c1.c9
-rw-r--r--cpu/mpc8260/i2c.c7
-rw-r--r--cpu/mpc8xx/i2c.c7
-rw-r--r--cpu/ppc4xx/i2c.c8
-rw-r--r--cpu/xscale/i2c.c7
-rw-r--r--cpu/xscale/start.S26
-rw-r--r--fs/fdos/dev.c2
-rw-r--r--include/cmd_console.h2
-rw-r--r--include/configs/csb226.h13
-rw-r--r--include/configs/trab.h32
-rw-r--r--include/devices.h2
-rw-r--r--lib_arm/board.c2
-rw-r--r--net/bootp.c8
-rw-r--r--tools/easylogo/easylogo.c2
30 files changed, 723 insertions, 268 deletions
diff --git a/CHANGELOG b/CHANGELOG
index 8d6e2fa71cd..01a3610325b 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,16 @@
Changes since U-Boot 0.2.2:
======================================================================
+* Patches by Robert Schwebel, 06 Mar 2003:
+ - fix bug in BOOTP code (must use NetCopyIP)
+ - update of CSB226 port
+ - clear BSS segment on XScale
+ - added support for i2c_init_board() function
+ - update to the Innokom plattform
+
+* Extend support for redundand environments for configurations where
+ environment size < sector size
+
* Patch by Rune Torgersen, 13 Feb 2003:
Add support for Motorola MPC8266ADS board
diff --git a/README b/README
index 6a011cb38c8..fb6a66b3ed7 100644
--- a/README
+++ b/README
@@ -897,6 +897,17 @@ The following options need to be configured:
controls the rate of data transfer. The data rate thus
is 1 / (I2C_DELAY * 4).
+ CFG_I2C_INIT_BOARD
+
+ When a board is reset during an i2c bus transfer
+ chips might think that the current transfer is still
+ in progress. On some boards it is possible to access
+ the i2c SCLK line directly, either by using the
+ processor pin as a GPIO or by having a second pin
+ connected to the bus. If this option is defined a
+ custom i2c_init_board() routine in boards/xxx/board.c
+ is run early in the boot sequence.
+
- SPI Support: CONFIG_SPI
Enables SPI driver (so far only tested with
@@ -1043,7 +1054,7 @@ The following options need to be configured:
If CONFIG_ENV_OVERWRITE is #defined in your config
file, the write protection for vendor parameters is
- completely disabled. Anybody can change or delte
+ completely disabled. Anybody can change or delete
these parameters.
Alternatively, if you #define _both_ CONFIG_ETHADDR
diff --git a/board/cradle/u-boot.lds b/board/cradle/u-boot.lds
index 0a89b3288d2..280fc48acef 100644
--- a/board/cradle/u-boot.lds
+++ b/board/cradle/u-boot.lds
@@ -47,7 +47,9 @@ SECTIONS
armboot_end_data = .;
. = ALIGN(4);
+ bss_start = .;
.bss : { *(.bss) }
+ bss_end = .;
armboot_end = .;
}
diff --git a/board/csb226/csb226.c b/board/csb226/csb226.c
index 0d99aa85b65..11cab005c66 100644
--- a/board/csb226/csb226.c
+++ b/board/csb226/csb226.c
@@ -32,10 +32,30 @@
# define SHOW_BOOT_PROGRESS(arg)
#endif
-/*
- * Miscelaneous platform dependent initialisations
+/**
+ * misc_init_r: - misc initialisation routines
*/
+int misc_init_r(void)
+{
+ uchar *str;
+
+ /* determine if the software update key is pressed during startup */
+#if 0
+ /* not ported yet... */
+ if (GPLR0 & 0x00000800) {
+ printf("using bootcmd_normal (sw-update button not pressed)\n");
+ str = getenv("bootcmd_normal");
+ } else {
+ printf("using bootcmd_update (sw-update button pressed)\n");
+ str = getenv("bootcmd_update");
+ }
+
+ setenv("bootcmd",str);
+#endif
+ return 0;
+}
+
/**
* board_init: - setup some data structures
diff --git a/board/csb226/flash.c b/board/csb226/flash.c
index 0b4e2f69ba1..c6cb95e2f34 100644
--- a/board/csb226/flash.c
+++ b/board/csb226/flash.c
@@ -45,44 +45,44 @@ flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
ulong flash_init(void)
{
- int i, j;
- ulong size = 0;
+ int i, j;
+ ulong size = 0;
for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
- ulong flashbase = 0;
- flash_info[i].flash_id =
- (INTEL_MANUFACT & FLASH_VENDMASK) |
- (INTEL_ID_28F128J3 & FLASH_TYPEMASK);
- flash_info[i].size = FLASH_BANK_SIZE;
- flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
- memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+ ulong flashbase = 0;
+ flash_info[i].flash_id =
+ (INTEL_MANUFACT & FLASH_VENDMASK) |
+ (INTEL_ID_28F128J3 & FLASH_TYPEMASK);
+ flash_info[i].size = FLASH_BANK_SIZE;
+ flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
+ memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
switch (i) {
- case 0:
- flashbase = PHYS_FLASH_1;
- break;
- default:
- panic("configured to many flash banks!\n");
- break;
- }
+ case 0:
+ flashbase = PHYS_FLASH_1;
+ break;
+ default:
+ panic("configured to many flash banks!\n");
+ break;
+ }
for (j = 0; j < flash_info[i].sector_count; j++) {
- flash_info[i].start[j] = flashbase + j*MAIN_SECT_SIZE;
+ flash_info[i].start[j] = flashbase + j*MAIN_SECT_SIZE;
+ }
+ size += flash_info[i].size;
}
- size += flash_info[i].size;
- }
/* Protect monitor and environment sectors */
- flash_protect(FLAG_PROTECT_SET,
- CFG_FLASH_BASE,
- CFG_FLASH_BASE + _armboot_end_data - _armboot_start,
- &flash_info[0]);
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_FLASH_BASE,
+ CFG_FLASH_BASE + _armboot_end_data - _armboot_start,
+ &flash_info[0]);
- flash_protect(FLAG_PROTECT_SET,
- CFG_ENV_ADDR,
- CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
- &flash_info[0]);
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+ &flash_info[0]);
- return size;
+ return size;
}
@@ -94,43 +94,43 @@ ulong flash_init(void)
void flash_print_info (flash_info_t *info)
{
- int i, j;
+ int i, j;
for (j=0; j<CFG_MAX_FLASH_BANKS; j++) {
switch (info->flash_id & FLASH_VENDMASK) {
- case (INTEL_MANUFACT & FLASH_VENDMASK):
- printf("Intel: ");
- break;
- default:
- printf("Unknown Vendor ");
- break;
- }
+ case (INTEL_MANUFACT & FLASH_VENDMASK):
+ printf("Intel: ");
+ break;
+ default:
+ printf("Unknown Vendor ");
+ break;
+ }
switch (info->flash_id & FLASH_TYPEMASK) {
- case (INTEL_ID_28F128J3 & FLASH_TYPEMASK):
- printf("28F128J3 (128Mbit)\n");
- break;
- default:
- printf("Unknown Chip Type\n");
+ case (INTEL_ID_28F128J3 & FLASH_TYPEMASK):
+ printf("28F128J3 (128Mbit)\n");
+ break;
+ default:
+ printf("Unknown Chip Type\n");
return;
- }
+ }
- printf(" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
+ printf(" Size: %ld MB in %d Sectors\n",
+ info->size >> 20, info->sector_count);
- printf(" Sector Start Addresses:");
+ printf(" Sector Start Addresses:");
for (i = 0; i < info->sector_count; i++) {
if ((i % 5) == 0) printf ("\n ");
- printf (" %08lX%s", info->start[i],
- info->protect[i] ? " (RO)" : " ");
- }
- printf ("\n");
- info++;
- }
+ printf (" %08lX%s", info->start[i],
+ info->protect[i] ? " (RO)" : " ");
+ }
+ printf ("\n");
+ info++;
+ }
}
@@ -139,46 +139,47 @@ void flash_print_info (flash_info_t *info)
*
*/
-int flash_erase (flash_info_t *info, int s_first, int s_last)
+int flash_erase(flash_info_t *info, int s_first, int s_last)
{
- int flag, prot, sect;
- int rc = ERR_OK;
+ int flag, prot, sect;
+ int rc = ERR_OK;
- if (info->flash_id == FLASH_UNKNOWN)
- return ERR_UNKNOWN_FLASH_TYPE;
+ if (info->flash_id == FLASH_UNKNOWN)
+ return ERR_UNKNOWN_FLASH_TYPE;
- if ((s_first < 0) || (s_first > s_last)) {
- return ERR_INVAL;
- }
+ if ((s_first < 0) || (s_first > s_last)) {
+ return ERR_INVAL;
+ }
if ((info->flash_id & FLASH_VENDMASK) != (INTEL_MANUFACT & FLASH_VENDMASK))
- return ERR_UNKNOWN_FLASH_VENDOR;
-
- prot = 0;
- for (sect=s_first; sect<=s_last; ++sect) {
+ return ERR_UNKNOWN_FLASH_VENDOR;
+
+ prot = 0;
+ for (sect=s_first; sect<=s_last; ++sect) {
if (info->protect[sect]) prot++;
}
if (prot) return ERR_PROTECTED;
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- * at address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
- flag = disable_interrupts();
+ /*
+ * Disable interrupts which might cause a timeout
+ * here. Remember that our exception vectors are
+ * at address 0 in the flash, and we don't want a
+ * (ticker) exception to happen while the flash
+ * chip is in programming mode.
+ */
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect<=s_last && !ctrlc(); sect++) {
+ flag = disable_interrupts();
- printf("Erasing sector %2d ... ", sect);
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect<=s_last && !ctrlc(); sect++) {
- /* arm simple, non interrupt dependent timer */
- reset_timer_masked();
+ printf("Erasing sector %2d ... ", sect);
- if (info->protect[sect] == 0) { /* not protected */
+ /* arm simple, non interrupt dependent timer */
+ reset_timer_masked();
+
+ if (info->protect[sect] == 0) { /* not protected */
u32 * volatile addr = (u32 * volatile)(info->start[sect]);
/* erase sector: */
@@ -190,32 +191,32 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
*addr = 0x00D000D0; /* erase confirm */
while ((*addr & 0x00800080) != 0x00800080) {
- if (get_timer_masked() > CFG_FLASH_ERASE_TOUT) {
+ if (get_timer_masked() > CFG_FLASH_ERASE_TOUT) {
*addr = 0x00B000B0; /* suspend erase*/
*addr = 0x00FF00FF; /* read mode */
- rc = ERR_TIMOUT;
- goto outahere;
- }
- }
+ rc = ERR_TIMOUT;
+ goto outahere;
+ }
+ }
*addr = 0x00500050; /* clear status register cmd. */
*addr = 0x00FF00FF; /* resest to read mode */
- }
+ }
- printf("ok.\n");
- }
+ printf("ok.\n");
+ }
if (ctrlc()) printf("User Interrupt!\n");
-outahere:
+ outahere:
- /* allow flash to settle - wait 10 ms */
- udelay_masked(10000);
+ /* allow flash to settle - wait 10 ms */
+ udelay_masked(10000);
if (flag) enable_interrupts();
- return rc;
+ return rc;
}
@@ -230,71 +231,71 @@ outahere:
static int write_word (flash_info_t *info, ulong dest, ushort data)
{
- ushort *addr = (ushort *)dest, val;
- int rc = ERR_OK;
- int flag;
+ u32 * volatile addr = (u32 * volatile)dest, val;
+ int rc = ERR_OK;
+ int flag;
/* Check if Flash is (sufficiently) erased */
if ((*addr & data) != data) return ERR_NOT_ERASED;
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- * at address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
- flag = disable_interrupts();
+ /*
+ * Disable interrupts which might cause a timeout
+ * here. Remember that our exception vectors are
+ * at address 0 in the flash, and we don't want a
+ * (ticker) exception to happen while the flash
+ * chip is in programming mode.
+ */
+ flag = disable_interrupts();
- /* clear status register command */
- *addr = 0x50;
+ /* clear status register command */
+ *addr = 0x50;
- /* program set-up command */
- *addr = 0x40;
+ /* program set-up command */
+ *addr = 0x40;
- /* latch address/data */
- *addr = data;
+ /* latch address/data */
+ *addr = data;
- /* arm simple, non interrupt dependent timer */
- reset_timer_masked();
+ /* arm simple, non interrupt dependent timer */
+ reset_timer_masked();
- /* wait while polling the status register */
+ /* wait while polling the status register */
while(((val = *addr) & 0x80) != 0x80) {
- if (get_timer_masked() > CFG_FLASH_WRITE_TOUT) {
- rc = ERR_TIMOUT;
+ if (get_timer_masked() > CFG_FLASH_WRITE_TOUT) {
+ rc = ERR_TIMOUT;
*addr = 0xB0; /* suspend program command */
- goto outahere;
+ goto outahere;
+ }
}
- }
-
- if(val & 0x1A) { /* check for error */
- printf("\nFlash write error %02x at address %08lx\n",
- (int)val, (unsigned long)dest);
- if(val & (1<<3)) {
- printf("Voltage range error.\n");
- rc = ERR_PROG_ERROR;
- goto outahere;
- }
- if(val & (1<<1)) {
- printf("Device protect error.\n");
- rc = ERR_PROTECTED;
- goto outahere;
- }
- if(val & (1<<4)) {
- printf("Programming error.\n");
- rc = ERR_PROG_ERROR;
- goto outahere;
- }
- rc = ERR_PROG_ERROR;
- goto outahere;
- }
-
-outahere:
+
+ if(val & 0x1A) { /* check for error */
+ printf("\nFlash write error %02x at address %08lx\n",
+ (int)val, (unsigned long)dest);
+ if(val & (1<<3)) {
+ printf("Voltage range error.\n");
+ rc = ERR_PROG_ERROR;
+ goto outahere;
+ }
+ if(val & (1<<1)) {
+ printf("Device protect error.\n");
+ rc = ERR_PROTECTED;
+ goto outahere;
+ }
+ if(val & (1<<4)) {
+ printf("Programming error.\n");
+ rc = ERR_PROG_ERROR;
+ goto outahere;
+ }
+ rc = ERR_PROG_ERROR;
+ goto outahere;
+ }
+
+ outahere:
*addr = 0xFF; /* read array command */
if (flag) enable_interrupts();
- return rc;
+ return rc;
}
@@ -311,63 +312,64 @@ outahere:
int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
{
- ulong cp, wp;
- ushort data;
- int l;
- int i, rc;
-
- wp = (addr & ~1); /* get lower word aligned address */
+ ulong cp, wp;
+ ushort data;
+ int l;
+ int i, rc;
+
+ wp = (addr & ~1); /* get lower word aligned address */
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i=0, cp=wp; i<l; ++i, ++cp) {
+ data = (data >> 8) | (*(uchar *)cp << 8);
+ }
+ for (; i<2 && cnt>0; ++i) {
+ data = (data >> 8) | (*src++ << 8);
+ --cnt;
+ ++cp;
+ }
+ for (; cnt==0 && i<2; ++i, ++cp) {
+ data = (data >> 8) | (*(uchar *)cp << 8);
+ }
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i=0, cp=wp; i<l; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *)cp << 8);
- }
- for (; i<2 && cnt>0; ++i) {
- data = (data >> 8) | (*src++ << 8);
- --cnt;
- ++cp;
- }
- for (; cnt==0 && i<2; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *)cp << 8);
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 2;
}
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 2;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 2) {
- /* data = *((vushort*)src); */
- data = *((ushort*)src);
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
+ /*
+ * handle word aligned part
+ */
+ while (cnt >= 2) {
+ /* data = *((vushort*)src); */
+ data = *((ushort*)src);
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ src += 2;
+ wp += 2;
+ cnt -= 2;
}
- src += 2;
- wp += 2;
- cnt -= 2;
- }
if (cnt == 0) return ERR_OK;
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i=0, cp=wp; i<2 && cnt>0; ++i, ++cp) {
- data = (data >> 8) | (*src++ << 8);
- --cnt;
- }
- for (; i<2; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *)cp << 8);
- }
-
- return write_word(info, wp, data);
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i=0, cp=wp; i<2 && cnt>0; ++i, ++cp) {
+ data = (data >> 8) | (*src++ << 8);
+ --cnt;
+ }
+ for (; i<2; ++i, ++cp) {
+ data = (data >> 8) | (*(uchar *)cp << 8);
+ }
+
+ return write_word(info, wp, data);
}
+
diff --git a/board/csb226/memsetup.S b/board/csb226/memsetup.S
index d34ead4a5b3..65671842aa7 100644
--- a/board/csb226/memsetup.S
+++ b/board/csb226/memsetup.S
@@ -313,16 +313,22 @@ mem_init:
/* documented in SDRAM data sheets. The address(es) used */
/* for this purpose must not be cacheable. */
- ldr r3, =CFG_DRAM_BASE
- str r2, [r3]
- str r2, [r3]
- str r2, [r3]
- str r2, [r3]
- str r2, [r3]
- str r2, [r3]
- str r2, [r3]
- str r2, [r3]
+ /* There should 9 writes, since the first write doesn't */
+ /* trigger a refresh cycle on PXA250. See Intel PXA250 and */
+ /* PXA210 Processors Specification Update, */
+ /* Jan 2003, Errata #116, page 30. */
+
+ ldr r3, =CFG_DRAM_BASE
+ str r2, [r3]
+ str r2, [r3]
+ str r2, [r3]
+ str r2, [r3]
+ str r2, [r3]
+ str r2, [r3]
+ str r2, [r3]
+ str r2, [r3]
+ str r2, [r3]
/* Step 4g: Write MDCNFG with enable bits asserted */
/* (MDCNFG:DEx set to 1). */
@@ -339,7 +345,6 @@ mem_init:
/* We are finished with Intel's memory controller initialisation */
-
/* ---------------------------------------------------------------- */
/* Disable (mask) all interrupts at interrupt controller */
/* ---------------------------------------------------------------- */
@@ -378,10 +383,11 @@ initclks:
str r2, [r1]
/* enable the 32Khz oscillator for RTC and PowerManager */
+/*
ldr r1, =OSCC
mov r2, #OSCC_OON
str r2, [r1]
-
+*/
/* NOTE: spin here until OSCC.OOK get set, meaning the PLL */
/* has settled. */
60:
@@ -404,8 +410,7 @@ initclks:
/* FIXME */
-#define NODEBUG
-#ifdef NODEBUG
+#ifndef DEBUG
/*Disable software and data breakpoints */
mov r0,#0
mcr p15,0,r0,c14,c8,0 /* ibcr0 */
@@ -415,7 +420,6 @@ initclks:
/*Enable all debug functionality */
mov r0,#0x80000000
mcr p14,0,r0,c10,c0,0 /* dcsr */
-
#endif
/* ---------------------------------------------------------------- */
diff --git a/board/csb226/u-boot.lds b/board/csb226/u-boot.lds
index 0a89b3288d2..280fc48acef 100644
--- a/board/csb226/u-boot.lds
+++ b/board/csb226/u-boot.lds
@@ -47,7 +47,9 @@ SECTIONS
armboot_end_data = .;
. = ALIGN(4);
+ bss_start = .;
.bss : { *(.bss) }
+ bss_end = .;
armboot_end = .;
}
diff --git a/board/innokom/flash.c b/board/innokom/flash.c
index b8e97e18652..5505bb549bb 100644
--- a/board/innokom/flash.c
+++ b/board/innokom/flash.c
@@ -31,12 +31,228 @@
#include <common.h>
#include <asm/arch/pxa-regs.h>
-#define FLASH_BANK_SIZE 0x02000000
-#define MAIN_SECT_SIZE 0x40000 /* 2x16 = 256k per sector */
+#if defined CFG_JFFS_CUSTOM_PART
+#include <jffs2/jffs2.h>
+#endif
+
+/* Debugging macros ------------------------------------------------------ */
+
+#undef FLASH_DEBUG
+//#define FLASH_DEBUG 1
+
+/* Some debug macros */
+#if (FLASH_DEBUG > 2 )
+#define PRINTK3(args...) printf(args)
+#else
+#define PRINTK3(args...)
+#endif
+
+#if FLASH_DEBUG > 1
+#define PRINTK2(args...) printf(args)
+#else
+#define PRINTK2(args...)
+#endif
+
+#ifdef FLASH_DEBUG
+#define PRINTK(args...) printf(args)
+#else
+#define PRINTK(args...)
+#endif
+
+/* ------------------------------------------------------------------------ */
+
+/* Development system: we have only 16 MB Flash */
+#ifdef CONFIG_MTD_INNOKOM_16MB
+#define FLASH_BANK_SIZE 0x01000000 /* 16 MB (during development) */
+#define MAIN_SECT_SIZE 0x00020000 /* 128k per sector */
+#endif
+
+/* Production system: we have 64 MB Flash */
+#ifdef CONFIG_MTD_INNOKOM_64MB
+#define FLASH_BANK_SIZE 0x04000000 /* 64 MB */
+#define MAIN_SECT_SIZE 0x00020000 /* 128k per sector */
+#endif
flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+#if defined CFG_JFFS_CUSTOM_PART
+
+/**
+ * jffs2_part_info - get information about a JFFS2 partition
+ *
+ * @part_num: number of the partition you want to get info about
+ * @return: struct part_info* in case of success, 0 if failure
+ */
+
+static struct part_info part;
+
+#ifdef CONFIG_MTD_INNOKOM_16MB
+#ifdef CONFIG_MTD_INNOKOM_64MB
+#error Please define only one CONFIG_MTD_INNOKOM_XXMB option.
+#endif
+struct part_info* jffs2_part_info(int part_num) {
+
+ PRINTK2("jffs2_part_info: part_num=%i\n",part_num);
+
+ /* u-boot partition */
+ if(part_num==0){
+ if(part.usr_priv==(void*)1) return &part;
+
+ memset(&part, 0, sizeof(part));
+
+ part.offset=(char*)0x00000000;
+ part.size=256*1024;
+
+ /* Mark the struct as ready */
+ part.usr_priv=(void*)1;
+
+ PRINTK("part.offset = 0x%08x\n",(unsigned int)part.offset);
+ PRINTK("part.size = 0x%08x\n",(unsigned int)part.size);
+ return &part;
+ }
+
+ /* primary OS+firmware partition */
+ if(part_num==1){
+ if(part.usr_priv==(void*)1) return &part;
+
+ memset(&part, 0, sizeof(part));
+
+ part.offset=(char*)0x00040000;
+ part.size=768*1024;
+
+ /* Mark the struct as ready */
+ part.usr_priv=(void*)1;
+
+ PRINTK("part.offset = 0x%08x\n",(unsigned int)part.offset);
+ PRINTK("part.size = 0x%08x\n",(unsigned int)part.size);
+ return &part;
+ }
+
+ /* secondary OS+firmware partition */
+ if(part_num==2){
+ if(part.usr_priv==(void*)1) return &part;
+
+ memset(&part, 0, sizeof(part));
+
+ part.offset=(char*)0x00100000;
+ part.size=8*1024*1024;
+
+ /* Mark the struct as ready */
+ part.usr_priv=(void*)1;
+
+ PRINTK("part.offset = 0x%08x\n",(unsigned int)part.offset);
+ PRINTK("part.size = 0x%08x\n",(unsigned int)part.size);
+ return &part;
+ }
+
+ /* data partition */
+ if(part_num==3){
+ if(part.usr_priv==(void*)1) return &part;
+
+ memset(&part, 0, sizeof(part));
+
+ part.offset=(char*)0x00900000;
+ part.size=7*1024*1024;
+
+ /* Mark the struct as ready */
+ part.usr_priv=(void*)1;
+
+ PRINTK("part.offset = 0x%08x\n",(unsigned int)part.offset);
+ PRINTK("part.size = 0x%08x\n",(unsigned int)part.size);
+
+ return &part;
+ }
+
+ PRINTK("jffs2_part_info: end of partition table\n");
+ return 0;
+}
+#endif /* CONFIG_MTD_INNOKOM_16MB */
+
+#ifdef CONFIG_MTD_INNOKOM_64MB
+#ifdef CONFIG_MTD_INNOKOM_16MB
+#error Please define only one CONFIG_MTD_INNOKOM_XXMB option.
+#endif
+struct part_info* jffs2_part_info(int part_num) {
+
+ PRINTK2("jffs2_part_info: part_num=%i\n",part_num);
+
+ /* u-boot partition */
+ if(part_num==0){
+ if(part.usr_priv==(void*)1) return &part;
+
+ memset(&part, 0, sizeof(part));
+
+ part.offset=(char*)0x00000000;
+ part.size=256*1024;
+
+ /* Mark the struct as ready */
+ part.usr_priv=(void*)1;
+
+ PRINTK("part.offset = 0x%08x\n",(unsigned int)part.offset);
+ PRINTK("part.size = 0x%08x\n",(unsigned int)part.size);
+ return &part;
+ }
+
+ /* primary OS+firmware partition */
+ if(part_num==1){
+ if(part.usr_priv==(void*)1) return &part;
+
+ memset(&part, 0, sizeof(part));
+
+ part.offset=(char*)0x00040000;
+ part.size=16*1024*1024-128*1024;
+
+ /* Mark the struct as ready */
+ part.usr_priv=(void*)1;
+
+ PRINTK("part.offset = 0x%08x\n",(unsigned int)part.offset);
+ PRINTK("part.size = 0x%08x\n",(unsigned int)part.size);
+ return &part;
+ }
+
+ /* secondary OS+firmware partition */
+ if(part_num==2){
+ if(part.usr_priv==(void*)1) return &part;
+
+ memset(&part, 0, sizeof(part));
+
+ part.offset=(char*)0x01020000;
+ part.size=16*1024*1024-128*1024;
+
+ /* Mark the struct as ready */
+ part.usr_priv=(void*)1;
+
+ PRINTK("part.offset = 0x%08x\n",(unsigned int)part.offset);
+ PRINTK("part.size = 0x%08x\n",(unsigned int)part.size);
+ return &part;
+ }
+
+ /* data partition */
+ if(part_num==3){
+ if(part.usr_priv==(void*)1) return &part;
+
+ memset(&part, 0, sizeof(part));
+
+ part.offset=(char*)0x02000000;
+ part.size=32*1024*1024;
+
+ /* Mark the struct as ready */
+ part.usr_priv=(void*)1;
+
+ PRINTK("part.offset = 0x%08x\n",(unsigned int)part.offset);
+ PRINTK("part.size = 0x%08x\n",(unsigned int)part.size);
+
+ return &part;
+ }
+
+ PRINTK("jffs2_part_info: end of partition table\n");
+ return 0;
+}
+#endif /* CONFIG_MTD_INNOKOM_64MB */
+#endif /* defined CFG_JFFS_CUSTOM_PART */
+
+
/**
* flash_init: - initialize data structures for flash chips
*
@@ -71,10 +287,10 @@ ulong flash_init(void)
size += flash_info[i].size;
}
- /* Protect monitor and environment sectors */
+ /* Protect u-boot sectors */
flash_protect(FLAG_PROTECT_SET,
CFG_FLASH_BASE,
- CFG_FLASH_BASE + _armboot_end_data - _armboot_start,
+ CFG_FLASH_BASE + (256*1024) - 1,
&flash_info[0]);
#ifdef CFG_ENV_IS_IN_FLASH
@@ -178,32 +394,38 @@ int flash_erase(flash_info_t *info, int s_first, int s_last)
printf("Erasing sector %2d ... ", sect);
+ PRINTK("\n");
+
/* arm simple, non interrupt dependent timer */
reset_timer_masked();
if (info->protect[sect] == 0) { /* not protected */
- u32 * volatile addr = (u32 * volatile)(info->start[sect]);
+ u16 * volatile addr = (u16 * volatile)(info->start[sect]);
- /* erase sector: */
- /* The strata flashs are aligned side by side on */
- /* the data bus, so we have to write the commands */
- /* to both chips here: */
+ PRINTK("unlocking sector\n");
+ *addr = 0x0060;
+ *addr = 0x00d0;
+ *addr = 0x00ff;
- *addr = 0x00200020; /* erase setup */
- *addr = 0x00D000D0; /* erase confirm */
+ PRINTK("erasing sector\n");
+ *addr = 0x0020;
+ PRINTK("confirming erase\n");
+ *addr = 0x00D0;
- while ((*addr & 0x00800080) != 0x00800080) {
+ while ((*addr & 0x0080) != 0x0080) {
+ PRINTK(".");
if (get_timer_masked() > CFG_FLASH_ERASE_TOUT) {
- *addr = 0x00B000B0; /* suspend erase*/
- *addr = 0x00FF00FF; /* read mode */
+ *addr = 0x00B0; /* suspend erase*/
+ *addr = 0x00FF; /* read mode */
rc = ERR_TIMOUT;
goto outahere;
}
}
- *addr = 0x00500050; /* clear status register cmd. */
- *addr = 0x00FF00FF; /* resest to read mode */
-
+ PRINTK("clearing status register\n");
+ *addr = 0x0050;
+ PRINTK("resetting to read mode");
+ *addr = 0x00FF;
}
printf("ok.\n");
@@ -233,7 +455,7 @@ int flash_erase(flash_info_t *info, int s_first, int s_last)
static int write_word (flash_info_t *info, ulong dest, ushort data)
{
- ushort *addr = (ushort *)dest, val;
+ volatile u16 *addr = (u16 *)dest, val;
int rc = ERR_OK;
int flag;
diff --git a/board/innokom/innokom.c b/board/innokom/innokom.c
index 7d2702f6582..17f6353d2ef 100644
--- a/board/innokom/innokom.c
+++ b/board/innokom/innokom.c
@@ -25,6 +25,7 @@
#include <common.h>
#include <asm/arch/pxa-regs.h>
+#include <asm/mach-types.h>
#ifdef CONFIG_SHOW_BOOT_PROGRESS
# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg)
@@ -32,10 +33,53 @@
# define SHOW_BOOT_PROGRESS(arg)
#endif
-/*
- * Miscelaneous platform dependent initialisations
+/**
+ * i2c_init_board - reset i2c bus. When the board is powercycled during a
+ * bus transfer it might hang; for details see doc/I2C_Edge_Conditions.
+ * The Innokom board has GPIO70 connected to SCLK which can be toggled
+ * until all chips think that their current cycles are finished.
+ */
+int i2c_init_board(void)
+{
+ int i;
+
+ /* set gpio pin to output */
+ GPDR(70) |= GPIO_bit(70);
+ for (i = 0; i < 11; i++) {
+ GPCR(70) = GPIO_bit(70);
+ udelay(10);
+ GPSR(70) = GPIO_bit(70);
+ udelay(10);
+ }
+ /* set gpio pin to input */
+ GPDR(70) &= ~GPIO_bit(70);
+
+ return 0;
+}
+
+
+/**
+ * misc_init_r: - misc initialisation routines
*/
+int misc_init_r(void)
+{
+ uchar *str;
+
+ /* determine if the software update key is pressed during startup */
+ if (GPLR0 & 0x00000800) {
+ printf("using bootcmd_normal (sw-update button not pressed)\n");
+ str = getenv("bootcmd_normal");
+ } else {
+ printf("using bootcmd_update (sw-update button pressed)\n");
+ str = getenv("bootcmd_update");
+ }
+
+ setenv("bootcmd",str);
+
+ return 0;
+}
+
/**
* board_init: - setup some data structures
@@ -51,7 +95,7 @@ int board_init (void)
/* so we do _nothing_ here */
/* arch number of Innokom board */
- gd->bd->bi_arch_number = 258;
+ gd->bd->bi_arch_number = MACH_TYPE_INNOKOM;
/* adress of boot parameters */
gd->bd->bi_boot_params = 0xa0000100;
diff --git a/board/innokom/memsetup.S b/board/innokom/memsetup.S
index f7d5eee5756..a2bc99d12d7 100644
--- a/board/innokom/memsetup.S
+++ b/board/innokom/memsetup.S
@@ -38,6 +38,9 @@ DRAM_SIZE: .long CFG_DRAM_SIZE
sub pc,pc,#4
.endm
+_TEXT_BASE:
+ .word TEXT_BASE
+
/*
* Memory setup
@@ -222,6 +225,12 @@ mem_init:
/* Step 2c: Write FLYCNFG FIXME: what's that??? */
/* ---------------------------------------------------------------- */
+ /* test if we run from flash or RAM - RAM/BDI: don't setup RAM */
+ adr r3, mem_init /* r0 <- current position of code */
+ ldr r2, =mem_init
+ cmp r3, r2 /* skip init if in place */
+ beq initirqs
+
/* ---------------------------------------------------------------- */
/* Step 2d: Initialize Timing for Sync Memory (SDCLK0) */
@@ -313,17 +322,23 @@ mem_init:
/* documented in SDRAM data sheets. The address(es) used */
/* for this purpose must not be cacheable. */
- ldr r3, =CFG_DRAM_BASE
- str r2, [r3]
- str r2, [r3]
- str r2, [r3]
- str r2, [r3]
- str r2, [r3]
- str r2, [r3]
- str r2, [r3]
- str r2, [r3]
+ /* There should 9 writes, since the first write doesn't */
+ /* trigger a refresh cycle on PXA250. See Intel PXA250 and */
+ /* PXA210 Processors Specification Update, */
+ /* Jan 2003, Errata #116, page 30. */
+ ldr r3, =CFG_DRAM_BASE
+ str r2, [r3]
+ str r2, [r3]
+ str r2, [r3]
+ str r2, [r3]
+ str r2, [r3]
+ str r2, [r3]
+ str r2, [r3]
+ str r2, [r3]
+ str r2, [r3]
+
/* Step 4g: Write MDCNFG with enable bits asserted */
/* (MDCNFG:DEx set to 1). */
@@ -339,7 +354,6 @@ mem_init:
/* We are finished with Intel's memory controller initialisation */
-
/* ---------------------------------------------------------------- */
/* Disable (mask) all interrupts at interrupt controller */
/* ---------------------------------------------------------------- */
@@ -405,8 +419,7 @@ initclks:
/* FIXME */
-#define NODEBUG
-#ifdef NODEBUG
+#ifndef DEBUG
/*Disable software and data breakpoints */
mov r0,#0
mcr p15,0,r0,c14,c8,0 /* ibcr0 */
@@ -416,7 +429,6 @@ initclks:
/*Enable all debug functionality */
mov r0,#0x80000000
mcr p14,0,r0,c10,c0,0 /* dcsr */
-
#endif
/* ---------------------------------------------------------------- */
diff --git a/board/innokom/u-boot.lds b/board/innokom/u-boot.lds
index 0a89b3288d2..280fc48acef 100644
--- a/board/innokom/u-boot.lds
+++ b/board/innokom/u-boot.lds
@@ -47,7 +47,9 @@ SECTIONS
armboot_end_data = .;
. = ALIGN(4);
+ bss_start = .;
.bss : { *(.bss) }
+ bss_end = .;
armboot_end = .;
}
diff --git a/board/lubbock/u-boot.lds b/board/lubbock/u-boot.lds
index 0a89b3288d2..280fc48acef 100644
--- a/board/lubbock/u-boot.lds
+++ b/board/lubbock/u-boot.lds
@@ -47,7 +47,9 @@ SECTIONS
armboot_end_data = .;
. = ALIGN(4);
+ bss_start = .;
.bss : { *(.bss) }
+ bss_end = .;
armboot_end = .;
}
diff --git a/board/mpl/common/common_util.c b/board/mpl/common/common_util.c
index 60c49af1510..a4a73a6b7cd 100644
--- a/board/mpl/common/common_util.c
+++ b/board/mpl/common/common_util.c
@@ -301,7 +301,7 @@ extern char *stdio_names[];
void show_stdio_dev(void)
{
- /* Print informations */
+ /* Print information */
printf ("In: ");
if (stdio_devices[stdin] == NULL) {
printf ("No input devices available!\n");
diff --git a/board/trab/u-boot.lds b/board/trab/u-boot.lds
index 92a369f01a6..5ea182923d9 100644
--- a/board/trab/u-boot.lds
+++ b/board/trab/u-boot.lds
@@ -38,7 +38,7 @@ SECTIONS
lib_generic/crc32.o (.text)
lib_generic/string.o (.text)
- . = env_offset;
+ . = DEFINED(env_offset) ? env_offset : .;
common/environment.o (.ppcenv)
*(.text)
diff --git a/common/console.c b/common/console.c
index d888d1ddc7e..13ba63b9467 100644
--- a/common/console.c
+++ b/common/console.c
@@ -496,7 +496,7 @@ int console_init_r (void)
}
#ifndef CFG_CONSOLE_INFO_QUIET
- /* Print informations */
+ /* Print information */
printf ("In: ");
if (stdio_devices[stdin] == NULL) {
printf ("No input devices available!\n");
diff --git a/common/env_flash.c b/common/env_flash.c
index 69fa2ae21f8..19e2282643d 100644
--- a/common/env_flash.c
+++ b/common/env_flash.c
@@ -34,6 +34,7 @@
#include <environment.h>
#include <cmd_nvedit.h>
#include <linux/stddef.h>
+#include <malloc.h>
#if ((CONFIG_COMMANDS&(CFG_CMD_ENV|CFG_CMD_FLASH)) == (CFG_CMD_ENV|CFG_CMD_FLASH))
#define CMD_SAVEENV
@@ -41,11 +42,6 @@
#error Cannot use CFG_ENV_ADDR_REDUND without CFG_CMD_ENV & CFG_CMD_FLASH
#endif
-#if defined(CFG_ENV_SECT_SIZE) && (CFG_ENV_SECT_SIZE > CFG_ENV_SIZE) && \
- defined(CFG_ENV_ADDR_REDUND)
-#error CFG_ENV_ADDR_REDUND should not be used when CFG_ENV_SECT_SIZE > CFG_ENV_SIZE
-#endif
-
#if defined(CFG_ENV_SIZE_REDUND) && (CFG_ENV_SIZE_REDUND < CFG_ENV_SIZE)
#error CFG_ENV_SIZE_REDUND should not be less then CFG_ENV_SIZE
#endif
@@ -80,8 +76,9 @@ static env_t *flash_addr = (env_t *)CFG_ENV_ADDR;
#ifdef CFG_ENV_ADDR_REDUND
static env_t *flash_addr_new = (env_t *)CFG_ENV_ADDR_REDUND;
-static ulong end_addr = CFG_ENV_ADDR + CFG_ENV_SIZE - 1;
-static ulong end_addr_new = CFG_ENV_ADDR_REDUND + CFG_ENV_SIZE_REDUND - 1;
+/* CFG_ENV_ADDR is supposed to be on sector boundary */
+static ulong end_addr = CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1;
+static ulong end_addr_new = CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - 1;
static uchar active_flag = 1;
static uchar obsolete_flag = 0;
@@ -164,6 +161,8 @@ int env_init(void)
int saveenv(void)
{
int rc = 1;
+ ulong up_data = 0;
+ char *saved_data = NULL;
debug ("Protect off %08lX ... %08lX\n",
(ulong)flash_addr, end_addr);
@@ -179,6 +178,22 @@ int saveenv(void)
goto Done;
}
+#if CFG_ENV_SECT_SIZE > CFG_ENV_SIZE
+ up_data = (end_addr_new + 1 - ((long)flash_addr_new + CFG_ENV_SIZE));
+ debug ("Data to save 0x%x\n", up_data);
+ if (up_data) {
+ if ((saved_data = malloc(up_data)) == NULL) {
+ printf("Unable to save the rest of sector (%ld)\n",
+ up_data);
+ goto Done;
+ }
+ memcpy(saved_data,
+ (void *)((long)flash_addr_new + CFG_ENV_SIZE), up_data);
+ debug ("Data (start 0x%x, len 0x%x) saved at 0x%x\n",
+ (long)flash_addr_new + CFG_ENV_SIZE,
+ up_data, saved_data);
+ }
+#endif
puts ("Erasing Flash...");
debug (" %08lX ... %08lX ...",
(ulong)flash_addr_new, end_addr_new);
@@ -212,6 +227,18 @@ int saveenv(void)
}
puts ("done\n");
+#if CFG_ENV_SECT_SIZE > CFG_ENV_SIZE
+ if (up_data) { /* restore the rest of sector */
+ debug ("Restoring the rest of data to 0x%x len 0x%x\n",
+ (long)flash_addr_new + CFG_ENV_SIZE, up_data);
+ if (flash_write(saved_data,
+ (long)flash_addr_new + CFG_ENV_SIZE,
+ up_data)) {
+ flash_perror(rc);
+ goto Done;
+ }
+ }
+#endif
{
env_t * etmp = flash_addr;
ulong ltmp = end_addr;
@@ -226,6 +253,8 @@ int saveenv(void)
rc = 0;
Done:
+ if (saved_data)
+ free (saved_data);
/* try to re-protect */
(void) flash_sect_protect (1, (ulong)flash_addr, end_addr);
(void) flash_sect_protect (1, (ulong)flash_addr_new, end_addr_new);
diff --git a/cpu/mpc824x/drivers/i2c/i2c1.c b/cpu/mpc824x/drivers/i2c/i2c1.c
index be6ec60a149..7a2eb666569 100644
--- a/cpu/mpc824x/drivers/i2c/i2c1.c
+++ b/cpu/mpc824x/drivers/i2c/i2c1.c
@@ -1128,6 +1128,15 @@ static void I2C_Set_Stat (unsigned int eumbbar, I2C_STAT stat)
void i2c_init (int speed, int slaveadd)
{
+#ifdef CFG_I2C_INIT_BOARD
+ /*
+ * call board specific i2c bus reset routine before accessing the
+ * environment, which might be in a chip on that bus. For details
+ * about this problem see doc/I2C_Edge_Conditions.
+ */
+ i2c_init_board();
+#endif
+
#ifdef DEBUG
I2C_Initialize (0x7f, 0, (void *) printf);
#else
diff --git a/cpu/mpc8260/i2c.c b/cpu/mpc8260/i2c.c
index 8bfa2e8e74e..2d65e327345 100644
--- a/cpu/mpc8260/i2c.c
+++ b/cpu/mpc8260/i2c.c
@@ -221,6 +221,13 @@ void i2c_init(int speed, int slaveadd)
volatile I2C_BD *rxbd, *txbd;
uint dpaddr;
+#ifdef CFG_I2C_INIT_BOARD
+ /* call board specific i2c bus reset routine before accessing the */
+ /* environment, which might be in a chip on that bus. For details */
+ /* about this problem see doc/I2C_Edge_Conditions. */
+ i2c_init_board();
+#endif
+
dpaddr = *((unsigned short*)(&immap->im_dprambase[PROFF_I2C_BASE]));
if (dpaddr == 0) {
/* need to allocate dual port ram */
diff --git a/cpu/mpc8xx/i2c.c b/cpu/mpc8xx/i2c.c
index 9d5d9d265fc..9e8b8c7e760 100644
--- a/cpu/mpc8xx/i2c.c
+++ b/cpu/mpc8xx/i2c.c
@@ -215,6 +215,13 @@ i2c_init(int speed, int slaveaddr)
volatile I2C_BD *rxbd, *txbd;
uint dpaddr;
+#ifdef CFG_I2C_INIT_BOARD
+ /* call board specific i2c bus reset routine before accessing the */
+ /* environment, which might be in a chip on that bus. For details */
+ /* about this problem see doc/I2C_Edge_Conditions. */
+ i2c_init_board();
+#endif
+
#ifdef CFG_I2C_UCODE_PATCH
iip = (iic_t *)&cp->cp_dpmem[iip->iic_rpbase];
#else
diff --git a/cpu/ppc4xx/i2c.c b/cpu/ppc4xx/i2c.c
index 68af057d1ef..7d8db9bf437 100644
--- a/cpu/ppc4xx/i2c.c
+++ b/cpu/ppc4xx/i2c.c
@@ -85,7 +85,15 @@ void i2c_init (int speed, int slaveadd)
unsigned long freqOPB;
int val, divisor;
+#ifdef CFG_I2C_INIT_BOARD
+ /* call board specific i2c bus reset routine before accessing the */
+ /* environment, which might be in a chip on that bus. For details */
+ /* about this problem see doc/I2C_Edge_Conditions. */
+ i2c_init_board();
+#endif
+
/* Handle possible failed I2C state */
+ /* FIXME: put this into i2c_init_board()? */
_i2c_bus_reset ();
/* clear lo master address */
diff --git a/cpu/xscale/i2c.c b/cpu/xscale/i2c.c
index f546f14cbe0..406f825cd50 100644
--- a/cpu/xscale/i2c.c
+++ b/cpu/xscale/i2c.c
@@ -41,6 +41,7 @@
* - I2C_PXA_SLAVE_ADDR
*/
+#include <asm/arch/hardware.h>
#include <asm/arch/pxa-regs.h>
#include <i2c.h>
@@ -244,6 +245,12 @@ i2c_transfer_finish:
void i2c_init(int speed, int slaveaddr)
{
+#ifdef CFG_I2C_INIT_BOARD
+ /* call board specific i2c bus reset routine before accessing the */
+ /* environment, which might be in a chip on that bus. For details */
+ /* about this problem see doc/I2C_Edge_Conditions. */
+ i2c_init_board();
+#endif
}
diff --git a/cpu/xscale/start.S b/cpu/xscale/start.S
index e63fece8b21..3d9784ebf4f 100644
--- a/cpu/xscale/start.S
+++ b/cpu/xscale/start.S
@@ -84,6 +84,17 @@ _armboot_end:
.word armboot_end
/*
+ * This is defined in the board specific linker script
+ */
+.globl _bss_start
+_bss_start:
+ .word bss_start
+
+.globl _bss_end
+_bss_end:
+ .word bss_end
+
+/*
* _armboot_real_end is the first usable RAM address behind armboot
* and the various stacks
*/
@@ -143,7 +154,20 @@ copy_loop:
ldr r0, _uboot_reloc /* upper 128 KiB: relocated uboot */
sub r0, r0, #CFG_MALLOC_LEN /* malloc area */
/* FIXME: bdinfo should be here */
- sub sp, r0, #12 /* leave 3 words for abort-stack */
+ sub sp, r0, #12 /* leave 3 words for abort-stack */
+
+clear_bss:
+
+ ldr r0, _bss_start /* find start of bss segment */
+ add r0, r0, #4 /* start at first byte of bss */
+ ldr r1, _bss_end /* stop here */
+ mov r2, #0x00000000 /* clear */
+
+clbss_l:str r2, [r0] /* clear loop... */
+ add r0, r0, #4
+ cmp r0, r1
+ bne clbss_l
+
ldr pc, _start_armboot
diff --git a/fs/fdos/dev.c b/fs/fdos/dev.c
index f38d07dbd81..809156ab0e0 100644
--- a/fs/fdos/dev.c
+++ b/fs/fdos/dev.c
@@ -149,7 +149,7 @@ int check_dev (BootSector_t *boot, Fs_t *fs)
__le16_to_cpu (boot -> TimeF));
- /* informations are extracted from boot sector */
+ /* information is extracted from boot sector */
heads = __le16_to_cpu (boot -> nheads);
sectors = __le16_to_cpu (boot -> nsect);
fs -> tot_sectors = __le32_to_cpu (boot -> bigsect);
diff --git a/include/cmd_console.h b/include/cmd_console.h
index 4ac8b83b409..c5f90c939ff 100644
--- a/include/cmd_console.h
+++ b/include/cmd_console.h
@@ -30,7 +30,7 @@
#if (CONFIG_COMMANDS & CFG_CMD_CONSOLE)
#define CMD_TBL_CONINFO MK_CMD_TBL_ENTRY( \
"coninfo", 5, 3, 1, do_coninfo, \
- "coninfo - print console devices and informations\n", \
+ "coninfo - print console devices and information\n", \
"" \
),
int do_coninfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
diff --git a/include/configs/csb226.h b/include/configs/csb226.h
index b6c7302f5ef..2806b6dd0fc 100644
--- a/include/configs/csb226.h
+++ b/include/configs/csb226.h
@@ -55,12 +55,13 @@
/*
* select serial console configuration
*/
-#define CONFIG_FFUART 1 /* we use FFUART on CSB226 */
+#define CONFIG_FFUART 1 /* we use FFUART on CSB226 */
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_BAUDRATE 19200
+#undef CONFIG_MISC_INIT_R /* not used yet */
#define CONFIG_COMMANDS (CONFIG_CMD_DFL & ~CFG_CMD_NET)
@@ -68,7 +69,7 @@
#include <cmd_confdefs.h>
#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTARGS "root=/dev/nfs ip=bootp console=ttyS0,19200"
+#define CONFIG_BOOTARGS "console=ttyS0,19200 ip=dhcp root=/dev/nfs, ether=0,0x08000000,eth0"
#define CONFIG_ETHADDR FF:FF:FF:FF:FF:FF
#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_IPADDR 192.168.1.56
@@ -76,8 +77,10 @@
#define CONFIG_BOOTCOMMAND "bootm 0x40000"
#define CONFIG_SHOW_BOOT_PROGRESS
+#define CONFIG_CMDLINE_TAG 1
+
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_BAUDRATE 19200 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
@@ -90,7 +93,7 @@
* used for the RAM copy of the uboot code
*
*/
-#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
+#define CFG_MALLOC_LEN (128*1024)
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "uboot> " /* Monitor Command Prompt */
@@ -104,7 +107,7 @@
#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
-#define CFG_LOAD_ADDR 0xa7fe0000 /* default load address */
+#define CFG_LOAD_ADDR 0xa3000000 /* default load address */
/* RS: where is this documented? */
/* RS: is this where U-Boot is */
/* RS: relocated to in RAM? */
diff --git a/include/configs/trab.h b/include/configs/trab.h
index 06aed93e689..61a643adc94 100644
--- a/include/configs/trab.h
+++ b/include/configs/trab.h
@@ -117,7 +117,6 @@
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
-
#define CONFIG_BOOTDELAY 5
#define CONFIG_PREBOOT "echo;echo *** booting ***;echo"
#define CONFIG_BOOTARGS "console=ttyS0"
@@ -126,6 +125,8 @@
#define CONFIG_HOSTNAME trab
#define CONFIG_SERVERIP 192.168.3.1
#define CONFIG_BOOTCOMMAND "run flash_nfs"
+
+#ifndef CONFIG_BIG_FLASH
#define CONFIG_EXTRA_ENV_SETTINGS \
"nfs_args=setenv bootargs root=/dev/nfs rw " \
"nfsroot=$(serverip):$(rootpath)\0" \
@@ -137,7 +138,7 @@
"load=tftp 0xC100000 /tftpboot/TRAB/u-boot.bin\0" \
"update=protect off 1:0-8;era 1:0-8;cp.b 0xc100000 0 $(filesize);" \
"setenv filesize;saveenv\0" \
- "loadfile=/tftpboot/TRAB/pImage\0" \
+ "loadfile=/tftpboot/TRAB/uImage\0" \
"loadaddr=c400000\0" \
"net_load=tftpboot $(loadaddr) $(loadfile)\0" \
"net_nfs=run net_load nfs_args add_net add_misc;bootm\0" \
@@ -146,6 +147,27 @@
"mdm_init1=ATZ\0" \
"mdm_init2=ATS0=1\0" \
"mdm_flow_control=rts/cts\0"
+#else /* CONFIG_BIG_FLASH */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "nfs_args=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$(serverip):$(rootpath)\0" \
+ "rootpath=/opt/eldk/arm_920TDI\0" \
+ "ram_args=setenv bootargs root=/dev/ram rw\0" \
+ "add_net=setenv bootargs $(bootargs) ethaddr=$(ethaddr) " \
+ "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off\0" \
+ "add_misc=setenv bootargs $(bootargs) console=ttyS0 panic=1\0" \
+ "load=tftp 0xC100000 /tftpboot/TRAB/u-boot.bin\0" \
+ "update=protect off 1:0;era 1:0;cp.b 0xc100000 0 $(filesize)\0" \
+ "loadfile=/tftpboot/TRAB/uImage\0" \
+ "loadaddr=c400000\0" \
+ "net_load=tftpboot $(loadaddr) $(loadfile)\0" \
+ "net_nfs=run net_load nfs_args add_net add_misc;bootm\0" \
+ "kernel_addr=00040000\0" \
+ "flash_nfs=run nfs_args add_net add_misc;bootm $(kernel_addr)\0" \
+ "mdm_init1=ATZ\0" \
+ "mdm_init2=ATS0=1\0" \
+ "mdm_flow_control=rts/cts\0"
+#endif /* CONFIG_BIG_FLASH */
#if 0 /* disabled for development */
#define CONFIG_AUTOBOOT_KEYED /* Enable password protection */
@@ -215,7 +237,11 @@
/* The following #defines are needed to get flash environment right */
#define CFG_MONITOR_BASE CFG_FLASH_BASE
+#ifndef CONFIG_BIG_FLASH
#define CFG_MONITOR_LEN (256 << 10)
+#else
+#define CFG_MONITOR_LEN (128 << 10)
+#endif
/*-----------------------------------------------------------------------
* FLASH and environment organization
@@ -239,7 +265,7 @@
#define CFG_ENV_SIZE 0x4000
#define CFG_ENV_SECT_SIZE 0x4000
#else
-#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x40000)
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x20000)
#define CFG_ENV_SIZE 0x4000
#define CFG_ENV_SECT_SIZE 0x20000
#endif
diff --git a/include/devices.h b/include/devices.h
index 875710d3516..4f46e17ac7b 100644
--- a/include/devices.h
+++ b/include/devices.h
@@ -35,7 +35,7 @@
#define DEV_FLAGS_SYSTEM 0x80000000 /* Device is a system device */
#define DEV_EXT_VIDEO 0x00000001 /* Video extensions supported */
-/* Device informations */
+/* Device information */
typedef struct {
int flags; /* Device flags: input/output/system */
int ext; /* Supported extensions */
diff --git a/lib_arm/board.c b/lib_arm/board.c
index 31cdd9ccde2..5b7bb6e3799 100644
--- a/lib_arm/board.c
+++ b/lib_arm/board.c
@@ -269,7 +269,7 @@ void start_armboot (void)
board_post_init ();
#endif
-printf ("### vfd_type=0x%02X vfd_data_lines_inv=%d\n",gd->vfd_type,gd->vfd_inv_data);
+printf ("### FB @ %08lX vfd_type=0x%02X vfd_data_lines_inv=%d\n",gd->fb_base,gd->vfd_type,gd->vfd_inv_data);
/* main_loop() can return to retry autoboot, if so just run it again. */
for (;;) {
diff --git a/net/bootp.c b/net/bootp.c
index cbce0617225..ef8cd605b54 100644
--- a/net/bootp.c
+++ b/net/bootp.c
@@ -211,7 +211,7 @@ static void BootpVendorFieldProcess(u8 *ext)
break;
case 18: /* Extension path - Not yet supported */
/*
- * This can be used to send the informations of the
+ * This can be used to send the information of the
* vendor area in another file that the client can
* access via TFTP.
*/
@@ -229,7 +229,7 @@ static void BootpVendorFieldProcess(u8 *ext)
/* Application layer fields */
case 43: /* Vendor specific info - Not yet supported */
/*
- * Binary informations to exchange specific
+ * Binary information to exchange specific
* product information.
*/
break;
@@ -752,6 +752,7 @@ void DhcpSendRequestPkt(Bootp_t *bp_offer)
volatile uchar *pkt, *iphdr;
Bootp_t *bp;
int pktlen, iplen, extlen;
+ IPaddr_t OfferedIP;
debug ("DhcpSendRequestPkt: Sending DHCPREQUEST\n");
pkt = NetTxPacket;
@@ -784,7 +785,8 @@ void DhcpSendRequestPkt(Bootp_t *bp_offer)
/*
* Copy options from OFFER packet if present
*/
- extlen = DhcpExtended(bp->bp_vend, DHCP_REQUEST, NetServerIP, bp->bp_yiaddr);
+ NetCopyIP(&OfferedIP, &bp->bp_yiaddr);
+ extlen = DhcpExtended(bp->bp_vend, DHCP_REQUEST, NetServerIP, OfferedIP);
pktlen = BOOTP_SIZE - sizeof(bp->bp_vend) + extlen;
iplen = BOOTP_HDR_SIZE - sizeof(bp->bp_vend) + extlen;
diff --git a/tools/easylogo/easylogo.c b/tools/easylogo/easylogo.c
index 548e3c3d2f3..3111068f604 100644
--- a/tools/easylogo/easylogo.c
+++ b/tools/easylogo/easylogo.c
@@ -264,7 +264,7 @@ int image_save_header (image_t *image, char *filename, char *varname)
if (file==NULL)
return -1 ;
-/* Author informations */
+/* Author information */
fprintf(file, "/*\n * Generated by EasyLogo, (C) 2000 by Paolo Scaffardi\n/*\n"); */
fprintf(file, " * To use this, include it and call: easylogo_plot(screen,&%s, width,x,y)\n *\n", varname);
fprintf(file, " * Where:\t'screen'\tis the pointer to the frame buffer\n");