video: dcu: Add DCU support for Vybrid SoC

The Vybrid SoC family has the same display controller unit (DCU)
like the LS1021A SoC. This patch adds platform data, pinmux defines
and clock control to enable the driver for Vybrid based  boards too.

9 files changed, 186 insertions, 5 deletions

diff --git a/arch/arm/include/asm/arch-vf610/crm_regs.h b/arch/arm/include/asm/arch-vf610/crm_regs.h
index 851c3b911e6..320b6b09398 100644
--- a/arch/arm/include/asm/arch-vf610/crm_regs.h
+++ b/arch/arm/include/asm/arch-vf610/crm_regs.h
@@ -9,6 +9,8 @@
 
 #ifndef __ASSEMBLY__
 
+#include <linux/types.h>
+
 /* Clock Controller Module (CCM) */
 struct ccm_reg {
 	u32 ccr;
@@ -154,6 +156,8 @@ struct anadig_reg {
 #define CCM_CACRR_ARM_CLK_DIV_MASK		0x7
 #define CCM_CACRR_ARM_CLK_DIV(v)		((v) & 0x7)
 
+#define CCM_CSCMR1_DCU1_CLK_SEL			(1 << 29)
+#define CCM_CSCMR1_DCU0_CLK_SEL			(1 << 28)
 #define CCM_CSCMR1_QSPI0_CLK_SEL_OFFSET		22
 #define CCM_CSCMR1_QSPI0_CLK_SEL_MASK		(0x3 << 22)
 #define CCM_CSCMR1_QSPI0_CLK_SEL(v)		(((v) & 0x3) << 22)
@@ -178,6 +182,12 @@ struct anadig_reg {
 #define CCM_CSCDR2_ESDHC1_CLK_DIV_MASK		(0xf << 20)
 #define CCM_CSCDR2_ESDHC1_CLK_DIV(v)		(((v) & 0xf) << 20)
 
+#define CCM_CSCDR3_DCU1_EN			(1 << 23)
+#define CCM_CSCDR3_DCU1_DIV_MASK		(0x7 << 20)
+#define CCM_CSCDR3_DCU1_DIV(v)			(((v) & 0x7) << 20)
+#define CCM_CSCDR3_DCU0_EN			(1 << 19)
+#define CCM_CSCDR3_DCU0_DIV_MASK		(0x7 << 16)
+#define CCM_CSCDR3_DCU0_DIV(v)			(((v) & 0x7) << 16)
 #define CCM_CSCDR3_NFC_PRE_DIV_OFFSET		13
 #define CCM_CSCDR3_NFC_PRE_DIV_MASK		(0x7 << 13)
 #define CCM_CSCDR3_NFC_PRE_DIV(v)		(((v) & 0x7) << 13)
@@ -195,6 +205,7 @@ struct anadig_reg {
 #define CCM_CCGR0_UART1_CTRL_MASK		(0x3 << 16)
 #define CCM_CCGR1_USBC0_CTRL_MASK       (0x3 << 8)
 #define CCM_CCGR1_PIT_CTRL_MASK			(0x3 << 14)
+#define CCM_CCGR1_TCON0_CTRL_MASK		(0x3 << 26)
 #define CCM_CCGR1_WDOGA5_CTRL_MASK		(0x3 << 28)
 #define CCM_CCGR2_QSPI0_CTRL_MASK		(0x3 << 8)
 #define CCM_CCGR2_IOMUXC_CTRL_MASK		(0x3 << 16)
@@ -205,6 +216,7 @@ struct anadig_reg {
 #define CCM_CCGR2_PORTE_CTRL_MASK		(0x3 << 26)
 #define CCM_CCGR3_ANADIG_CTRL_MASK		0x3
 #define CCM_CCGR3_SCSC_CTRL_MASK        (0x3 << 4)
+#define CCM_CCGR3_DCU0_CTRL_MASK        (0x3 << 16)
 #define CCM_CCGR4_WKUP_CTRL_MASK		(0x3 << 20)
 #define CCM_CCGR4_CCM_CTRL_MASK			(0x3 << 22)
 #define CCM_CCGR4_GPC_CTRL_MASK			(0x3 << 24)
diff --git a/arch/arm/include/asm/arch-vf610/imx-regs.h b/arch/arm/include/asm/arch-vf610/imx-regs.h
index a7d765af359..512bc1fdb53 100644
--- a/arch/arm/include/asm/arch-vf610/imx-regs.h
+++ b/arch/arm/include/asm/arch-vf610/imx-regs.h
@@ -69,6 +69,7 @@
 #define USB_PHY0_BASE_ADDR  (AIPS0_BASE_ADDR + 0x00050800)
 #define USB_PHY1_BASE_ADDR  (AIPS0_BASE_ADDR + 0x00050C00)
 #define SCSC_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00052000)
+#define DCU0_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00058000)
 #define ASRC_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00060000)
 #define SPDIF_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00061000)
 #define ESAI_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00062000)
@@ -90,6 +91,7 @@
 #define USBC1_BASE_ADDR     (AIPS1_BASE_ADDR + 0x00034000)
 #define ENET_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00050000)
 #define ENET1_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00051000)
+#define DCU1_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00058000)
 #define NFC_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00060000)
 
 #define QSPI0_AMBA_BASE		0x20000000
diff --git a/arch/arm/include/asm/arch-vf610/iomux-vf610.h b/arch/arm/include/asm/arch-vf610/iomux-vf610.h
index 9226e69fec1..6d0f817f12f 100644
--- a/arch/arm/include/asm/arch-vf610/iomux-vf610.h
+++ b/arch/arm/include/asm/arch-vf610/iomux-vf610.h
@@ -32,6 +32,9 @@
 #define VF610_QSPI_PAD_CTRL	(PAD_CTL_SPEED_HIGH | PAD_CTL_DSE_150ohm | \
 				PAD_CTL_PUS_22K_UP | PAD_CTL_OBE_IBE_ENABLE)
 
+#define VF610_DCU_PAD_CTRL	(PAD_CTL_SPEED_MED | PAD_CTL_SRE | \
+				PAD_CTL_DSE_37ohm | PAD_CTL_OBE_ENABLE)
+
 enum {
 	VF610_PAD_PTA6__RMII0_CLKIN		= IOMUX_PAD(0x0000, 0x0000, 2, __NA_, 0, VF610_ENET_PAD_CTRL),
 	VF610_PAD_PTA6__RMII0_CLKOUT		= IOMUX_PAD(0x0000, 0x0000, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
@@ -103,6 +106,34 @@ enum {
 	VF610_PAD_PTC27__NF_ALE  		= IOMUX_PAD(0x0190, 0x0190, 6, __NA_, 0, VF610_NFC_CN_PAD_CTRL),
 
 	VF610_PAD_PTC28__NF_CLE  		= IOMUX_PAD(0x0194, 0x0194, 6, __NA_, 0, VF610_NFC_CN_PAD_CTRL),
+	VF610_PAD_PTE0__DCU0_HSYNC		= IOMUX_PAD(0x01a4, 0x01a4, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE1__DCU0_VSYNC		= IOMUX_PAD(0x01a8, 0x01a8, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE2__DCU0_PCLK		= IOMUX_PAD(0x01ac, 0x01ac, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE4__DCU0_DE			= IOMUX_PAD(0x01b4, 0x01b4, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE5__DCU0_R0			= IOMUX_PAD(0x01b8, 0x01b8, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE6__DCU0_R1			= IOMUX_PAD(0x01bc, 0x01bc, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE7__DCU0_R2			= IOMUX_PAD(0x01c0, 0x01c0, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE8__DCU0_R3			= IOMUX_PAD(0x01c4, 0x01c4, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE9__DCU0_R4			= IOMUX_PAD(0x01c8, 0x01c8, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE10__DCU0_R5		= IOMUX_PAD(0x01cc, 0x01cc, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE11__DCU0_R6		= IOMUX_PAD(0x01d0, 0x01d0, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE12__DCU0_R7		= IOMUX_PAD(0x01d4, 0x01d4, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE13__DCU0_G0		= IOMUX_PAD(0x01d8, 0x01d8, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE14__DCU0_G1		= IOMUX_PAD(0x01dc, 0x01dc, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE15__DCU0_G2		= IOMUX_PAD(0x01e0, 0x01e0, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE16__DCU0_G3		= IOMUX_PAD(0x01e4, 0x01e4, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE17__DCU0_G4		= IOMUX_PAD(0x01e8, 0x01e8, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE18__DCU0_G5		= IOMUX_PAD(0x01ec, 0x01ec, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE19__DCU0_G6		= IOMUX_PAD(0x01f0, 0x01f0, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE20__DCU0_G7		= IOMUX_PAD(0x01f4, 0x01f4, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE21__DCU0_B0		= IOMUX_PAD(0x01f8, 0x01f8, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE22__DCU0_B1		= IOMUX_PAD(0x01fc, 0x01fc, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE23__DCU0_B2		= IOMUX_PAD(0x0200, 0x0200, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE24__DCU0_B3		= IOMUX_PAD(0x0204, 0x0204, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE25__DCU0_B4		= IOMUX_PAD(0x0208, 0x0208, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE26__DCU0_B5		= IOMUX_PAD(0x020c, 0x020c, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE27__DCU0_B6		= IOMUX_PAD(0x0210, 0x0210, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE28__DCU0_B7		= IOMUX_PAD(0x0214, 0x0214, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
 
 	VF610_PAD_DDR_RESETB			= IOMUX_PAD(0x021c, 0x021c, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
 	VF610_PAD_DDR_A15__DDR_A_15		= IOMUX_PAD(0x0220, 0x0220, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
diff --git a/arch/arm/include/asm/imx-common/iomux-v3.h b/arch/arm/include/asm/imx-common/iomux-v3.h
index e0a49be4ff7..5f161bb5f19 100644
--- a/arch/arm/include/asm/imx-common/iomux-v3.h
+++ b/arch/arm/include/asm/imx-common/iomux-v3.h
@@ -128,7 +128,10 @@ typedef u64 iomux_v3_cfg_t;
 #define PAD_CTL_SRE		(1 << 11)
 
 #define PAD_CTL_DSE_150ohm	(1 << 6)
+#define PAD_CTL_DSE_75ohm	(2 << 6)
 #define PAD_CTL_DSE_50ohm	(3 << 6)
+#define PAD_CTL_DSE_37ohm	(4 << 6)
+#define PAD_CTL_DSE_30ohm	(5 << 6)
 #define PAD_CTL_DSE_25ohm	(6 << 6)
 #define PAD_CTL_DSE_20ohm	(7 << 6)
 
diff --git a/board/toradex/colibri_vf/Makefile b/board/toradex/colibri_vf/Makefile
index c7e5134ba1e..b5233b040ed 100644
--- a/board/toradex/colibri_vf/Makefile
+++ b/board/toradex/colibri_vf/Makefile
@@ -5,3 +5,4 @@
 #
 
 obj-y	:= colibri_vf.o
+obj-$(CONFIG_FSL_DCU_FB) += dcu.o
diff --git a/board/toradex/colibri_vf/colibri_vf.c b/board/toradex/colibri_vf/colibri_vf.c
index 5158346f18a..d9cc5fae5e8 100644
--- a/board/toradex/colibri_vf/colibri_vf.c
+++ b/board/toradex/colibri_vf/colibri_vf.c
@@ -149,6 +149,49 @@ static void setup_iomux_nfc(void)
 }
 #endif
 
+#ifdef CONFIG_FSL_DCU_FB
+static void setup_iomux_fsl_dcu(void)
+{
+	static const iomux_v3_cfg_t dcu0_pads[] = {
+		VF610_PAD_PTE0__DCU0_HSYNC,
+		VF610_PAD_PTE1__DCU0_VSYNC,
+		VF610_PAD_PTE2__DCU0_PCLK,
+		VF610_PAD_PTE4__DCU0_DE,
+		VF610_PAD_PTE5__DCU0_R0,
+		VF610_PAD_PTE6__DCU0_R1,
+		VF610_PAD_PTE7__DCU0_R2,
+		VF610_PAD_PTE8__DCU0_R3,
+		VF610_PAD_PTE9__DCU0_R4,
+		VF610_PAD_PTE10__DCU0_R5,
+		VF610_PAD_PTE11__DCU0_R6,
+		VF610_PAD_PTE12__DCU0_R7,
+		VF610_PAD_PTE13__DCU0_G0,
+		VF610_PAD_PTE14__DCU0_G1,
+		VF610_PAD_PTE15__DCU0_G2,
+		VF610_PAD_PTE16__DCU0_G3,
+		VF610_PAD_PTE17__DCU0_G4,
+		VF610_PAD_PTE18__DCU0_G5,
+		VF610_PAD_PTE19__DCU0_G6,
+		VF610_PAD_PTE20__DCU0_G7,
+		VF610_PAD_PTE21__DCU0_B0,
+		VF610_PAD_PTE22__DCU0_B1,
+		VF610_PAD_PTE23__DCU0_B2,
+		VF610_PAD_PTE24__DCU0_B3,
+		VF610_PAD_PTE25__DCU0_B4,
+		VF610_PAD_PTE26__DCU0_B5,
+		VF610_PAD_PTE27__DCU0_B6,
+		VF610_PAD_PTE28__DCU0_B7,
+	};
+
+	imx_iomux_v3_setup_multiple_pads(dcu0_pads, ARRAY_SIZE(dcu0_pads));
+}
+
+static void setup_tcon(void)
+{
+	setbits_le32(TCON0_BASE_ADDR, (1 << 29));
+}
+#endif
+
 #ifdef CONFIG_FSL_ESDHC
 struct fsl_esdhc_cfg esdhc_cfg[1] = {
 	{ESDHC1_BASE_ADDR},
@@ -280,6 +323,17 @@ static void clock_init(void)
 			CCM_CSCDR3_NFC_PRE_DIV(5));
 	clrsetbits_le32(&ccm->cscmr2, CCM_REG_CTRL_MASK,
 			CCM_CSCMR2_RMII_CLK_SEL(2));
+
+#ifdef CONFIG_FSL_DCU_FB
+	setbits_le32(&ccm->ccgr1, CCM_CCGR1_TCON0_CTRL_MASK);
+
+	setbits_le32(&ccm->ccgr3, CCM_CCGR3_DCU0_CTRL_MASK);
+
+	clrbits_le32(&ccm->cscmr1, CCM_CSCMR1_DCU0_CLK_SEL);
+	clrsetbits_le32(&ccm->cscdr3,
+			CCM_CSCDR3_DCU0_DIV_MASK | CCM_CSCDR3_DCU0_EN,
+			CCM_CSCDR3_DCU0_DIV(0) | CCM_CSCDR3_DCU0_EN);
+#endif
 }
 
 static void mscm_init(void)
@@ -310,6 +364,10 @@ int board_early_init_f(void)
 #ifdef CONFIG_NAND_VF610_NFC
 	setup_iomux_nfc();
 #endif
+#ifdef CONFIG_FSL_DCU_FB
+	setup_tcon();
+	setup_iomux_fsl_dcu();
+#endif
 
 	return 0;
 }
diff --git a/board/toradex/colibri_vf/dcu.c b/board/toradex/colibri_vf/dcu.c
new file mode 100644
index 00000000000..861b95c948a
--- /dev/null
+++ b/board/toradex/colibri_vf/dcu.c
@@ -0,0 +1,32 @@
+/*
+ * Copyright 2015 Toradex AG
+ *
+ * FSL DCU platform driver
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <asm/arch/crm_regs.h>
+#include <common.h>
+#include <fsl_dcu_fb.h>
+#include "div64.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+unsigned int dcu_set_pixel_clock(unsigned int pixclock)
+{
+	unsigned long long div;
+
+	div = (unsigned long long)(PLL1_PFD2_FREQ / 1000);
+	do_div(div, pixclock);
+
+	return div;
+}
+
+int platform_dcu_init(unsigned int xres, unsigned int yres,
+		      const char *port,
+		      struct fb_videomode *dcu_fb_videomode)
+{
+	fsl_dcu_init(xres, yres, 32);
+
+	return 0;
+}
diff --git a/drivers/video/fsl_dcu_fb.c b/drivers/video/fsl_dcu_fb.c
index d4cd3827766..badd7f504a7 100644
--- a/drivers/video/fsl_dcu_fb.c
+++ b/drivers/video/fsl_dcu_fb.c
@@ -40,7 +40,7 @@
 #define DCU_VSYN_PARA_BP(x)		((x) << 22)
 #define DCU_VSYN_PARA_PW(x)		((x) << 11)
 #define DCU_VSYN_PARA_FP(x)		(x)
-#define DCU_SYN_POL_INV_PXCK_FALL	(0 << 6)
+#define DCU_SYN_POL_INV_PXCK_FALL	(1 << 6)
 #define DCU_SYN_POL_NEG_REMAIN		(0 << 5)
 #define DCU_SYN_POL_INV_VS_LOW		(1 << 1)
 #define DCU_SYN_POL_INV_HS_LOW		(1)
@@ -101,7 +101,7 @@ static struct fb_videomode fsl_dcu_mode_480_272 = {
 /*
  * This setting is used for Siliconimage SiI9022A HDMI
  */
-static struct fb_videomode fsl_dcu_mode_640_480 = {
+static struct fb_videomode fsl_dcu_cea_mode_640_480 = {
 	.name		= "640x480-60",
 	.refresh	= 60,
 	.xres		= 640,
@@ -117,6 +117,22 @@ static struct fb_videomode fsl_dcu_mode_640_480 = {
 	.vmode		= FB_VMODE_NONINTERLACED,
 };
 
+static struct fb_videomode fsl_dcu_mode_640_480 = {
+	.name		= "640x480-60",
+	.refresh	= 60,
+	.xres		= 640,
+	.yres		= 480,
+	.pixclock	= 25175,
+	.left_margin	= 40,
+	.right_margin	= 24,
+	.upper_margin	= 32,
+	.lower_margin	= 11,
+	.hsync_len	= 96,
+	.vsync_len	= 2,
+	.sync		= 0,
+	.vmode		= FB_VMODE_NONINTERLACED,
+};
+
 /*
  * DCU register map
  */
@@ -175,7 +191,7 @@ static void reset_total_layers(void)
 	struct dcu_reg *regs = (struct dcu_reg *)CONFIG_SYS_DCU_ADDR;
 	int i;
 
-	for (i = 0; i < DCU_LAYER_MAX_NUM; i++) {
+	for (i = 0; i < DCU_TOTAL_LAYER_NUM; i++) {
 		dcu_write32(&regs->ctrldescl[i][0], 0);
 		dcu_write32(&regs->ctrldescl[i][1], 0);
 		dcu_write32(&regs->ctrldescl[i][2], 0);
@@ -185,8 +201,10 @@ static void reset_total_layers(void)
 		dcu_write32(&regs->ctrldescl[i][6], 0);
 		dcu_write32(&regs->ctrldescl[i][7], 0);
 		dcu_write32(&regs->ctrldescl[i][8], 0);
+#ifdef CONFIG_LS102XA
 		dcu_write32(&regs->ctrldescl[i][9], 0);
 		dcu_write32(&regs->ctrldescl[i][10], 0);
+#endif
 	}
 
 	dcu_write32(&regs->update_mode, DCU_UPDATE_MODE_READREG);
@@ -327,7 +345,11 @@ void *video_hw_init(void)
 		fsl_dcu_mode_db = &fsl_dcu_mode_480_272;
 		break;
 	case RESOLUTION(640, 480):
-		fsl_dcu_mode_db = &fsl_dcu_mode_640_480;
+		if (!strncmp(options, "monitor=hdmi", 12))
+			fsl_dcu_mode_db = &fsl_dcu_cea_mode_640_480;
+		else
+			fsl_dcu_mode_db = &fsl_dcu_mode_640_480;
+
 		break;
 	default:
 		printf("unsupported resolution %ux%u\n",
diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
index 982a4e5391b..007f09ebe34 100644
--- a/include/configs/colibri_vf.h
+++ b/include/configs/colibri_vf.h
@@ -34,8 +34,28 @@
 #define CONFIG_MXC_OCOTP
 #endif
 
+#define CONFIG_FSL_DCU_FB
+
+#ifdef CONFIG_FSL_DCU_FB
+#define CONFIG_VIDEO
+#define CONFIG_CMD_BMP
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_SPLASH_SCREEN_ALIGN
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VIDEO_BMP_LOGO
+
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_CONSOLE_MUX
+
+#define CONFIG_SYS_FSL_DCU_LE
+#define CONFIG_SYS_DCU_ADDR		DCU0_BASE_ADDR
+#define DCU_TOTAL_LAYER_NUM		64
+#define DCU_LAYER_MAX_NUM		6
+#endif
+
 /* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2 * 1024 * 1024)
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 4 * 1024 * 1024)
 
 #define CONFIG_BOARD_EARLY_INIT_F