powerpc: ep8248: remove orphan board

This board has been orphan for a while.
(Emails to its maintainer have been bouncing.)

Because MPC82xx family is old enough, nobody would pick up
the maintainership on it.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denx <wd@denx.de>

7 files changed, 1 insertions, 522 deletions

diff --git a/board/ep8248/Makefile b/board/ep8248/Makefile
deleted file mode 100644
index bfaf1c89d8..0000000000
--- a/board/ep8248/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= ep8248.o
diff --git a/board/ep8248/ep8248.c b/board/ep8248/ep8248.c
deleted file mode 100644
index 736c1806d1..0000000000
--- a/board/ep8248/ep8248.c
+++ /dev/null
@@ -1,254 +0,0 @@
-/*
- * Copyright (C) 2004 Arabella Software Ltd.
- * Yuli Barcohen <yuli@arabellasw.com>
- *
- * Support for Embedded Planet EP8248 boards.
- * Tested on EP8248E.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc8260.h>
-#include <ioports.h>
-
-/*
- * I/O Port configuration table
- *
- * if conf is 1, then that port pin will be configured at boot time
- * according to the five values podr/pdir/ppar/psor/pdat for that entry
- */
-
-#define CONFIG_SYS_FCC1 (CONFIG_ETHER_ON_FCC1 == 1)
-#define CONFIG_SYS_FCC2 (CONFIG_ETHER_ON_FCC2 == 1)
-
-const iop_conf_t iop_conf_tab[4][32] = {
-
-    /* Port A */
-    {	/*	      conf      ppar psor pdir podr pdat */
-	/* PA31 */ { CONFIG_SYS_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII COL    */
-	/* PA30 */ { CONFIG_SYS_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII CRS    */
-	/* PA29 */ { CONFIG_SYS_FCC1,   1,   1,   1,   0,   0 }, /* FCC1 MII TX_ER  */
-	/* PA28 */ { CONFIG_SYS_FCC1,   1,   1,   1,   0,   0 }, /* FCC1 MII TX_EN  */
-	/* PA27 */ { CONFIG_SYS_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII RX_DV  */
-	/* PA26 */ { CONFIG_SYS_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII RX_ER  */
-	/* PA25 */ { 0,          0,   0,   0,   0,   0 }, /* PA25            */
-	/* PA24 */ { 0,          0,   0,   0,   0,   0 }, /* PA24            */
-	/* PA23 */ { 0,          0,   0,   0,   0,   0 }, /* PA23            */
-	/* PA22 */ { 0,          0,   0,   0,   0,   0 }, /* PA22            */
-	/* PA21 */ { CONFIG_SYS_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[3] */
-	/* PA20 */ { CONFIG_SYS_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[2] */
-	/* PA19 */ { CONFIG_SYS_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[1] */
-	/* PA18 */ { CONFIG_SYS_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[0] */
-	/* PA17 */ { CONFIG_SYS_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[0] */
-	/* PA16 */ { CONFIG_SYS_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[1] */
-	/* PA15 */ { CONFIG_SYS_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[2] */
-	/* PA14 */ { CONFIG_SYS_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[3] */
-	/* PA13 */ { 0,          0,   0,   0,   0,   0 }, /* PA13            */
-	/* PA12 */ { 0,          0,   0,   0,   0,   0 }, /* PA12            */
-	/* PA11 */ { 0,          0,   0,   0,   0,   0 }, /* PA11            */
-	/* PA10 */ { 0,          0,   0,   0,   0,   0 }, /* PA10            */
-	/* PA9  */ { 0,          1,   0,   1,   0,   0 }, /* SMC2 TxD        */
-	/* PA8  */ { 0,          1,   0,   0,   0,   0 }, /* SMC2 RxD        */
-	/* PA7  */ { 0,          0,   0,   0,   0,   0 }, /* PA7             */
-	/* PA6  */ { 0,          0,   0,   0,   0,   0 }, /* PA6             */
-	/* PA5  */ { 0,          0,   0,   0,   0,   0 }, /* PA5             */
-	/* PA4  */ { 0,          0,   0,   0,   0,   0 }, /* PA4             */
-	/* PA3  */ { 0,          0,   0,   0,   0,   0 }, /* PA3             */
-	/* PA2  */ { 0,          0,   0,   0,   0,   0 }, /* PA2             */
-	/* PA1  */ { 0,          0,   0,   0,   0,   0 }, /* PA1             */
-	/* PA0  */ { 0,          0,   0,   0,   0,   0 }  /* PA0             */
-    },
-
-    /* Port B */
-    {   /*	      conf      ppar psor pdir podr pdat */
-	/* PB31 */ { CONFIG_SYS_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TX_ER  */
-	/* PB30 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RX_DV  */
-	/* PB29 */ { CONFIG_SYS_FCC2,   1,   1,   1,   0,   0 }, /* FCC2 MII TX_EN  */
-	/* PB28 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RX_ER  */
-	/* PB27 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII COL    */
-	/* PB26 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII CRS    */
-	/* PB25 */ { CONFIG_SYS_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[3] */
-	/* PB24 */ { CONFIG_SYS_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[2] */
-	/* PB23 */ { CONFIG_SYS_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[1] */
-	/* PB22 */ { CONFIG_SYS_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[0] */
-	/* PB21 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[0] */
-	/* PB20 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[1] */
-	/* PB19 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[2] */
-	/* PB18 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[3] */
-	/* PB17 */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB16 */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB15 */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB14 */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB13 */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB12 */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB11 */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB10 */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB9  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB8  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB7  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB6  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB5  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB4  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB3  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB2  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB1  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB0  */ { 0,          0,   0,   0,   0,   0 }  /* non-existent    */
-    },
-
-    /* Port C */
-    {   /*	      conf      ppar psor pdir podr pdat */
-	/* PC31 */ { 0,          0,   0,   0,   0,   0 }, /* PC31            */
-	/* PC30 */ { 0,          0,   0,   0,   0,   0 }, /* PC30            */
-	/* PC29 */ { 0,          0,   0,   0,   0,   0 }, /* PC29            */
-	/* PC28 */ { 0,          0,   0,   0,   0,   0 }, /* PC28            */
-	/* PC27 */ { 0,          0,   0,   0,   0,   0 }, /* PC27            */
-	/* PC26 */ { 0,          0,   0,   0,   0,   0 }, /* PC26            */
-	/* PC25 */ { 0,          0,   0,   0,   0,   0 }, /* PC25            */
-	/* PC24 */ { 0,          0,   0,   0,   0,   0 }, /* PC24            */
-	/* PC23 */ { 0,          0,   0,   0,   0,   0 }, /* PC23            */
-	/* PC22 */ { CONFIG_SYS_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 RxClk (CLK10) */
-	/* PC21 */ { CONFIG_SYS_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 TxClk (CLK11) */
-	/* PC20 */ { 0,          0,   0,   0,   0,   0 }, /* PC20            */
-	/* PC19 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 RxClk (CLK13) */
-	/* PC18 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 TxClk (CLK14) */
-	/* PC17 */ { 0,          0,   0,   0,   0,   0 }, /* PC17            */
-	/* PC16 */ { 0,          0,   0,   0,   0,   0 }, /* PC16            */
-	/* PC15 */ { 0,          0,   0,   0,   0,   0 }, /* PC15            */
-	/* PC14 */ { 0,          0,   0,   0,   0,   0 }, /* PC14            */
-	/* PC13 */ { 0,          0,   0,   0,   0,   0 }, /* PC13            */
-	/* PC12 */ { 0,          0,   0,   0,   0,   0 }, /* PC12            */
-	/* PC11 */ { 0,          0,   0,   0,   0,   0 }, /* PC11            */
-	/* PC10 */ { 0,          0,   0,   0,   0,   0 }, /* PC10            */
-	/* PC9  */ { 1,          0,   0,   1,   0,   1 }, /* MDIO            */
-	/* PC8  */ { 1,          0,   0,   1,   0,   1 }, /* MDC             */
-	/* PC7  */ { 0,          0,   0,   0,   0,   0 }, /* PC7             */
-	/* PC6  */ { 0,          0,   0,   0,   0,   0 }, /* PC6             */
-	/* PC5  */ { 1,          1,   0,   1,   0,   0 }, /* SMC1 TxD        */
-	/* PC4  */ { 1,          1,   0,   0,   0,   0 }, /* SMC1 RxD        */
-	/* PC3  */ { 0,          0,   0,   0,   0,   0 }, /* PC3             */
-	/* PC2  */ { 0,          0,   0,   0,   0,   0 }, /* PC2             */
-	/* PC1  */ { 0,          0,   0,   0,   0,   0 }, /* PC1             */
-	/* PC0  */ { 0,          0,   0,   0,   0,   0 }, /* PC0             */
-    },
-
-    /* Port D */
-    {   /*	      conf      ppar psor pdir podr pdat */
-	/* PD31 */ { 1,          1,   0,   0,   0,   0 }, /* SCC1 RxD        */
-	/* PD30 */ { 1,          1,   1,   1,   0,   0 }, /* SCC1 TxD        */
-	/* PD29 */ { 0,          0,   0,   0,   0,   0 }, /* PD29            */
-	/* PD28 */ { 0,          0,   0,   0,   0,   0 }, /* PD28            */
-	/* PD27 */ { 0,          0,   0,   0,   0,   0 }, /* PD27            */
-	/* PD26 */ { 0,          0,   0,   0,   0,   0 }, /* PD26            */
-	/* PD25 */ { 0,          0,   0,   0,   0,   0 }, /* PD25            */
-	/* PD24 */ { 0,          0,   0,   0,   0,   0 }, /* PD24            */
-	/* PD23 */ { 0,          0,   0,   0,   0,   0 }, /* PD23            */
-	/* PD22 */ { 0,          0,   0,   0,   0,   0 }, /* PD22            */
-	/* PD21 */ { 0,          0,   0,   0,   0,   0 }, /* PD21            */
-	/* PD20 */ { 0,          0,   0,   0,   0,   0 }, /* PD20            */
-	/* PD19 */ { 0,          0,   0,   0,   0,   0 }, /* PD19            */
-	/* PD18 */ { 0,          0,   0,   0,   0,   0 }, /* PD18            */
-	/* PD17 */ { 0,          0,   0,   0,   0,   0 }, /* PD17            */
-	/* PD16 */ { 0,          0,   0,   0,   0,   0 }, /* PD16            */
-	/* PD15 */ { 1,          1,   1,   0,   1,   0 }, /* I2C SDA         */
-	/* PD14 */ { 1,          1,   1,   0,   1,   0 }, /* I2C SCL         */
-	/* PD13 */ { 0,          0,   0,   0,   0,   0 }, /* PD13            */
-	/* PD12 */ { 0,          0,   0,   0,   0,   0 }, /* PD12            */
-	/* PD11 */ { 0,          0,   0,   0,   0,   0 }, /* PD11            */
-	/* PD10 */ { 0,          0,   0,   0,   0,   0 }, /* PD10            */
-	/* PD9  */ { 0,          0,   0,   0,   0,   0 }, /* PD9             */
-	/* PD8  */ { 0,          0,   0,   0,   0,   0 }, /* PD8             */
-	/* PD7  */ { 0,          0,   0,   0,   0,   0 }, /* PD7             */
-	/* PD6  */ { 0,          0,   0,   0,   0,   0 }, /* PD6             */
-	/* PD5  */ { 0,          0,   0,   0,   0,   0 }, /* PD5             */
-	/* PD4  */ { 0,          0,   0,   0,   0,   0 }, /* PD4             */
-	/* PD3  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PD2  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PD1  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PD0  */ { 0,          0,   0,   0,   0,   0 }  /* non-existent    */
-    }
-};
-
-int board_early_init_f (void)
-{
-	vu_char *bcsr = (vu_char *)CONFIG_SYS_BCSR;
-
-	bcsr[4] |= 0x30; /* Turn the LEDs off */
-
-#if defined(CONFIG_CONS_ON_SMC) || defined(CONFIG_KGDB_ON_SMC)
-	bcsr[6] |= 0x10;
-#endif
-#if defined(CONFIG_CONS_ON_SCC) || defined(CONFIG_KGDB_ON_SCC)
-	bcsr[7] |= 0x10;
-#endif
-
-#if CONFIG_SYS_FCC1
-	bcsr[8] |= 0xC0;
-#endif /* CONFIG_SYS_FCC1 */
-#if CONFIG_SYS_FCC2
-	bcsr[8] |= 0x30;
-#endif /* CONFIG_SYS_FCC2 */
-
-	return 0;
-}
-
-phys_size_t initdram(int board_type)
-{
-	vu_char *bcsr = (vu_char *)CONFIG_SYS_BCSR;
-	long int msize = 16L << (bcsr[2] & 3);
-
-#ifndef CONFIG_SYS_RAMBOOT
-	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
-	volatile memctl8260_t *memctl = &immap->im_memctl;
-	vu_char *ramaddr = (vu_char *)CONFIG_SYS_SDRAM_BASE;
-	uchar c = 0xFF;
-	uint psdmr = CONFIG_SYS_PSDMR;
-	int i;
-
-	immap->im_siu_conf.sc_ppc_acr  = 0x02;
-	immap->im_siu_conf.sc_ppc_alrh = 0x30126745;
-	immap->im_siu_conf.sc_tescr1   = 0x00004000;
-
-	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
-
-	/* Initialise 60x bus SDRAM */
-	memctl->memc_psrt = CONFIG_SYS_PSRT;
-	memctl->memc_or1  = CONFIG_SYS_SDRAM_OR;
-	memctl->memc_br1  = CONFIG_SYS_SDRAM_BR;
-	memctl->memc_psdmr = psdmr | PSDMR_OP_PREA; /* Precharge all banks */
-	*ramaddr = c;
-	memctl->memc_psdmr = psdmr | PSDMR_OP_CBRR; /* CBR refresh */
-	for (i = 0; i < 8; i++)
-		*ramaddr = c;
-	memctl->memc_psdmr = psdmr | PSDMR_OP_MRW;  /* Mode Register write */
-	*ramaddr = c;
-	memctl->memc_psdmr = psdmr | PSDMR_RFEN;    /* Refresh enable */
-	*ramaddr = c;
-#endif /* !CONFIG_SYS_RAMBOOT */
-
-	/* Return total 60x bus SDRAM size */
-	return msize * 1024 * 1024;
-}
-
-int checkboard(void)
-{
-	vu_char *bcsr = (vu_char *)CONFIG_SYS_BCSR;
-
-	puts("Board: ");
-	switch (bcsr[0]) {
-	case 0x0C:
-		printf("EP8248E 1.0 CPLD revision %d\n", bcsr[1]);
-		break;
-	default:
-		printf("unknown: ID=%02X\n", bcsr[0]);
-	}
-
-	return 0;
-}
-
-#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
-void ft_board_setup(void *blob, bd_t *bd)
-{
-	ft_cpu_setup( blob, bd);
-}
-#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */
diff --git a/boards.cfg b/boards.cfg
index d5e99ba00a..d6810d6a1a 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -1242,7 +1242,6 @@ Orphan  powerpc     mpc5xxx        -           matrix_vision   mvsmr
 Orphan  powerpc     mpc824x        -           -               hidden_dragon       HIDDEN_DRAGON                         -                                                                                                                                 Yusdi Santoso <yusdi_santoso@adaptec.com>
 Orphan  powerpc     mpc824x        -           etin            -                   debris                                -                                                                                                                                 Sangmoon Kim <dogoil@etinsys.com>
 Orphan  powerpc     mpc824x        -           etin            -                   kvme080                               -                                                                                                                                 Sangmoon Kim <dogoil@etinsys.com>
-Orphan  powerpc     mpc8260        -           -               ep8248              ep8248                                -                                                                                                                                 Yuli Barcohen <yuli@arabellasw.com>
 Orphan  powerpc     mpc83xx        -           freescale       mpc8360erdk         MPC8360ERDK                           -                                                                                                                                 Anton Vorontsov <avorontsov@ru.mvista.com>
 Orphan  powerpc     mpc83xx        -           freescale       mpc8360erdk         MPC8360ERDK_33                        MPC8360ERDK:CLKIN_33MHZ                                                                                                           Anton Vorontsov <avorontsov@ru.mvista.com>
 Orphan  powerpc     mpc83xx        -           matrix_vision   mergerbox           MERGERBOX                             -                                                                                                                                 Andre Schwarz <andre.schwarz@matrix-vision.de>
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index fc5d271ae1..2b9eb69a9d 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
 
 Board            Arch        CPU            Commit      Removed     Last known maintainer/contact
 =================================================================================================
+ep8248           powerpc     mpc8260        -           -           Yuli Barcohen <yuli@arabellasw.com>
 ispan            powerpc     mpc8260        -           -           Yuli Barcohen <yuli@arabellasw.com>
 rattler          powerpc     mpc8260        -           -           Yuli Barcohen <yuli@arabellasw.com>
 zpc1900          powerpc     mpc8260        -           -           Yuli Barcohen <yuli@arabellasw.com>
diff --git a/include/common.h b/include/common.h
index 3473ee50ef..91dc0f3c10 100644
--- a/include/common.h
+++ b/include/common.h
@@ -54,8 +54,6 @@ typedef volatile unsigned char	vu_char;
 #include <asm/immap_512x.h>
 #elif defined(CONFIG_MPC8260)
 #if   defined(CONFIG_MPC8247) \
-   || defined(CONFIG_MPC8248) \
-   || defined(CONFIG_MPC8271) \
    || defined(CONFIG_MPC8272)
 #define CONFIG_MPC8272_FAMILY	1
 #endif
diff --git a/include/configs/ep8248.h b/include/configs/ep8248.h
deleted file mode 100644
index f1af96ddbb..0000000000
--- a/include/configs/ep8248.h
+++ /dev/null
@@ -1,253 +0,0 @@
-/*
- * Copyright (C) 2004 Arabella Software Ltd.
- * Yuli Barcohen <yuli@arabellasw.com>
- *
- * U-Boot configuration for Embedded Planet EP8248 boards.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_MPC8248
-#define CPU_ID_STR		"MPC8248"
-
-#define CONFIG_EP8248			/* Embedded Planet EP8248 board */
-
-#define	CONFIG_SYS_TEXT_BASE	0xFFF00000
-
-#define CONFIG_BOARD_EARLY_INIT_F 1	/* Call board_early_init_f	*/
-
-/* Allow serial number (serial#) and MAC address (ethaddr) to be overwritten */
-#define CONFIG_ENV_OVERWRITE
-
-/*
- * Select serial console configuration
- *
- * If either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
- * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
- * for SCC).
- */
-#define	CONFIG_CONS_ON_SMC		/* Console is on SMC         */
-#undef  CONFIG_CONS_ON_SCC		/* It's not on SCC           */
-#undef	CONFIG_CONS_NONE		/* It's not on external UART */
-#define CONFIG_CONS_INDEX	1	/* SMC1 is used for console  */
-
-#define CONFIG_SYS_BCSR		0xFA000000
-
-/* Pass open firmware flat device tree */
-#define CONFIG_OF_LIBFDT	1
-#define CONFIG_OF_BOARD_SETUP	1
-
-#define OF_TBCLK        (bd->bi_busfreq / 4)
-#define OF_STDOUT_PATH  "/soc/cpm/serial <at> 11a80"
-
-/* Select ethernet configuration */
-#undef	CONFIG_ETHER_ON_SCC		/* Ethernet is not on SCC */
-#define CONFIG_ETHER_ON_FCC		/* Ethernet is on FCC     */
-#undef	CONFIG_ETHER_NONE		/* No external Ethernet   */
-
-#define CONFIG_SYS_CPMFCR_RAMTYPE	0
-#define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
-
-#define CONFIG_HAS_ETH0
-#define CONFIG_ETHER_ON_FCC1		1
-/* - Rx clock is CLK10
- * - Tx clock is CLK11
- * - BDs/buffers on 60x bus
- * - Full duplex
- */
-#define CONFIG_SYS_CMXFCR_MASK1	(CMXFCR_FC1 | CMXFCR_RF1CS_MSK | CMXFCR_TF1CS_MSK)
-#define CONFIG_SYS_CMXFCR_VALUE1	(CMXFCR_RF1CS_CLK10 | CMXFCR_TF1CS_CLK11)
-
-#define CONFIG_HAS_ETH1
-#define CONFIG_ETHER_ON_FCC2		1
-/* - Rx clock is CLK13
- * - Tx clock is CLK14
- * - BDs/buffers on 60x bus
- * - Full duplex
- */
-#define CONFIG_SYS_CMXFCR_MASK2	(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
-#define CONFIG_SYS_CMXFCR_VALUE2	(CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
-
-#define CONFIG_MII			/* MII PHY management        */
-#define CONFIG_BITBANGMII		/* Bit-banged MDIO interface */
-/*
- * GPIO pins used for bit-banged MII communications
- */
-#define MDIO_PORT		0	/* Not used - implemented in BCSR */
-
-#define MDIO_ACTIVE		(*(vu_char *)(CONFIG_SYS_BCSR + 8) &= 0xFB)
-#define MDIO_TRISTATE		(*(vu_char *)(CONFIG_SYS_BCSR + 8) |= 0x04)
-#define MDIO_READ		(*(vu_char *)(CONFIG_SYS_BCSR + 8) & 1)
-
-#define MDIO(bit)		if(bit) *(vu_char *)(CONFIG_SYS_BCSR + 8) |= 0x01; \
-				else	*(vu_char *)(CONFIG_SYS_BCSR + 8) &= 0xFE
-
-#define MDC(bit)		if(bit) *(vu_char *)(CONFIG_SYS_BCSR + 8) |= 0x02; \
-				else	*(vu_char *)(CONFIG_SYS_BCSR + 8) &= 0xFD
-
-#define MIIDELAY		udelay(1)
-
-#ifndef CONFIG_8260_CLKIN
-#define CONFIG_8260_CLKIN	66000000	/* in Hz */
-#endif
-
-#define CONFIG_BAUDRATE		38400
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ECHO
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_IMMAP
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-
-
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */
-#define CONFIG_BOOTCOMMAND	"bootm FF860000"	/* autoboot command */
-#define CONFIG_BOOTARGS		"root=/dev/mtdblock1 rw mtdparts=phys:7M(root),-(root)ro"
-
-#if defined(CONFIG_CMD_KGDB)
-#undef	CONFIG_KGDB_ON_SMC		/* define if kgdb on SMC */
-#define CONFIG_KGDB_ON_SCC		/* define if kgdb on SCC */
-#undef	CONFIG_KGDB_NONE		/* define if kgdb on something else */
-#define CONFIG_KGDB_INDEX	1	/* which serial channel for kgdb */
-#define CONFIG_KGDB_BAUDRATE	115200	/* speed to run kgdb serial port at */
-#endif
-
-#define CONFIG_BZIP2	/* include support for bzip2 compressed images */
-#undef	CONFIG_WATCHDOG			/* disable platform specific watchdog */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_LONGHELP			/* undef to save memory	    */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
-#else
-#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size  */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size  */
-#define CONFIG_SYS_MAXARGS		16		/* max number of command args */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size  */
-
-#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
-#define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
-
-#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
-
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
-
-#define CONFIG_SYS_FLASH_BASE		0xFF800000
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of flash banks	*/
-#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max num of sects on one chip */
-
-#define	CONFIG_SYS_DIRECT_FLASH_TFTP
-
-#if defined(CONFIG_CMD_JFFS2)
-#define CONFIG_SYS_JFFS2_FIRST_BANK	0
-#define CONFIG_SYS_JFFS2_NUM_BANKS	CONFIG_SYS_MAX_FLASH_BANKS
-#define CONFIG_SYS_JFFS2_FIRST_SECTOR  0
-#define CONFIG_SYS_JFFS2_LAST_SECTOR   62
-#define CONFIG_SYS_JFFS2_SORT_FRAGMENTS
-#define CONFIG_SYS_JFFS_CUSTOM_PART
-#endif
-
-#if defined(CONFIG_CMD_I2C)
-#define CONFIG_HARD_I2C		1	/* To enable I2C support	*/
-#define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed			*/
-#define CONFIG_SYS_I2C_SLAVE		0x7F	/* I2C slave address		*/
-#endif
-
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-#define CONFIG_SYS_RAMBOOT
-#endif
-
-#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256KB for Monitor */
-
-#define CONFIG_ENV_IS_IN_FLASH
-
-#ifdef CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_SECT_SIZE	0x20000
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
-#endif /* CONFIG_ENV_IS_IN_FLASH */
-
-#define CONFIG_SYS_DEFAULT_IMMR	0x00010000
-
-#define CONFIG_SYS_IMMR		0xF0000000
-
-#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE	0x2000	/* Size of used area in DPRAM	*/
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-/* Hard reset configuration word */
-#define CONFIG_SYS_HRCW_MASTER		0x0C40025A /* Not used - provided by FPGA */
-/* No slaves */
-#define CONFIG_SYS_HRCW_SLAVE1		0
-#define CONFIG_SYS_HRCW_SLAVE2		0
-#define CONFIG_SYS_HRCW_SLAVE3		0
-#define CONFIG_SYS_HRCW_SLAVE4		0
-#define CONFIG_SYS_HRCW_SLAVE5		0
-#define CONFIG_SYS_HRCW_SLAVE6		0
-#define CONFIG_SYS_HRCW_SLAVE7		0
-
-#define CONFIG_SYS_MALLOC_LEN		(4096 << 10)	/* Reserve 4 MB for malloc()	*/
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
-
-#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC8260 CPUs */
-#if defined(CONFIG_CMD_KGDB)
-#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
-#endif
-
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		(HID0_ICE | HID0_IFEM | HID0_ABE)
-
-#define CONFIG_SYS_HID2		0
-
-#define CONFIG_SYS_SIUMCR		0x01240200
-#define CONFIG_SYS_SYPCR		0xFFFF0683
-#define CONFIG_SYS_BCR			0x00000000
-#define CONFIG_SYS_SCCR		SCCR_DFBRG01
-
-#define CONFIG_SYS_RMR			RMR_CSRE
-#define CONFIG_SYS_TMCNTSC		(TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
-#define CONFIG_SYS_PISCR		(PISCR_PS|PISCR_PTF|PISCR_PTE)
-#define CONFIG_SYS_RCCR		0
-
-#define CONFIG_SYS_MPTPR		0x1300
-#define CONFIG_SYS_PSDMR		0x82672522
-#define CONFIG_SYS_PSRT		0x4B
-
-#define CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_SDRAM_BR		(CONFIG_SYS_SDRAM_BASE | 0x00001841)
-#define CONFIG_SYS_SDRAM_OR		0xFF0030C0
-
-#define CONFIG_SYS_BR0_PRELIM		(CONFIG_SYS_FLASH_BASE | 0x00001801)
-#define CONFIG_SYS_OR0_PRELIM		0xFF8008C2
-#define CONFIG_SYS_BR2_PRELIM		(CONFIG_SYS_BCSR | 0x00000801)
-#define CONFIG_SYS_OR2_PRELIM		0xFFF00864
-
-#define CONFIG_SYS_RESET_ADDRESS	0xC0000000
-
-#endif /* __CONFIG_H */
diff --git a/include/mpc8260.h b/include/mpc8260.h
index a8ae278799..9980c74b51 100644
--- a/include/mpc8260.h
+++ b/include/mpc8260.h
@@ -21,10 +21,6 @@
 #if defined(CONFIG_MPC8272_FAMILY)
 #ifdef CONFIG_MPC8247
 #define CPU_ID_STR	"MPC8247"
-#elif defined CONFIG_MPC8248
-#define CPU_ID_STR	"MPC8248"
-#elif defined CONFIG_MPC8271
-#define CPU_ID_STR	"MPC8271"
 #else
 #define CPU_ID_STR	"MPC8272"
 #endif