summaryrefslogtreecommitdiff
path: root/arch/arm/mach-mvebu
diff options
context:
space:
mode:
authorKevin Smith <kevin.smith@elecsyscorp.com>2015-10-23 17:53:19 +0000
committerLuka Perkov <luka.perkov@sartura.hr>2015-11-17 23:41:41 +0100
commit490753ace38c436f05b02a827bfe9b0ace44990a (patch)
tree73404000ee4f48d4842219ffe3a6e48831fbf009 /arch/arm/mach-mvebu
parent18c202aa5407f6315d62d26bd2b0be798623a945 (diff)
arm: mvebu: a38x: serdes specification cleanup
Instead of allocating space in the driver for the serdes specification table, just allow the board file to set a pointer to it. Also, allow the board to only specify the lanes that are used instead of including unused lanes. Signed-off-by: Kevin Smith <kevin.smith@elecsyscorp.com> Acked-by: Stefan Roese <sr@denx.de> Cc: Dirk Eibach <eibach@gdsys.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
Diffstat (limited to 'arch/arm/mach-mvebu')
-rw-r--r--arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.c13
-rw-r--r--arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.h2
-rw-r--r--arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c77
-rw-r--r--arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.h8
4 files changed, 48 insertions, 52 deletions
diff --git a/arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.c b/arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.c
index 994741232b..06a7715773 100644
--- a/arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.c
+++ b/arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.c
@@ -13,17 +13,16 @@
#include "ctrl_pex.h"
#include "sys_env_lib.h"
-int hws_pex_config(const struct serdes_map *serdes_map)
+int hws_pex_config(const struct serdes_map *serdes_map, u8 count)
{
u32 pex_idx, tmp, next_busno, first_busno, temp_pex_reg,
temp_reg, addr, dev_id, ctrl_mode;
enum serdes_type serdes_type;
- u32 idx, max_lane_num;
+ u32 idx;
DEBUG_INIT_FULL_S("\n### hws_pex_config ###\n");
- max_lane_num = hws_serdes_get_max_lane();
- for (idx = 0; idx < max_lane_num; idx++) {
+ for (idx = 0; idx < count; idx++) {
serdes_type = serdes_map[idx].serdes_type;
/* configuration for PEX only */
if ((serdes_type != PEX0) && (serdes_type != PEX1) &&
@@ -47,7 +46,7 @@ int hws_pex_config(const struct serdes_map *serdes_map)
tmp = reg_read(SOC_CTRL_REG);
tmp &= ~0x03;
- for (idx = 0; idx < max_lane_num; idx++) {
+ for (idx = 0; idx < count; idx++) {
serdes_type = serdes_map[idx].serdes_type;
if ((serdes_type != PEX0) &&
((serdes_map[idx].serdes_mode == PEX_ROOT_COMPLEX_X4) ||
@@ -81,7 +80,7 @@ int hws_pex_config(const struct serdes_map *serdes_map)
next_busno = 0;
mdelay(150);
- for (idx = 0; idx < max_lane_num; idx++) {
+ for (idx = 0; idx < count; idx++) {
serdes_type = serdes_map[idx].serdes_type;
DEBUG_INIT_FULL_S(" serdes_type=0x");
DEBUG_INIT_FULL_D(serdes_type, 8);
@@ -191,7 +190,7 @@ int hws_pex_config(const struct serdes_map *serdes_map)
/* Update pex DEVICE ID */
ctrl_mode = sys_env_model_get();
- for (idx = 0; idx < max_lane_num; idx++) {
+ for (idx = 0; idx < count; idx++) {
serdes_type = serdes_map[idx].serdes_type;
/* configuration for PEX only */
if ((serdes_type != PEX0) && (serdes_type != PEX1) &&
diff --git a/arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.h b/arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.h
index 16ee4cbc53..5f7e2c7aa2 100644
--- a/arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.h
+++ b/arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.h
@@ -78,7 +78,7 @@
#define PEX_STATUS_AND_COMMAND 0x004
#define PXSAC_MABORT BIT(29) /* Recieved Master Abort */
-int hws_pex_config(const struct serdes_map *serdes_map);
+int hws_pex_config(const struct serdes_map *serdes_map, u8 count);
int pex_local_bus_num_set(u32 pex_if, u32 bus_num);
int pex_local_dev_num_set(u32 pex_if, u32 dev_num);
u32 pex_config_read(u32 pex_if, u32 bus, u32 dev, u32 func, u32 reg_off);
diff --git a/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c b/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c
index 24e9af6761..7d671997cb 100644
--- a/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c
+++ b/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c
@@ -20,11 +20,6 @@
#error "No device is defined"
#endif
-/*
- * The board topology map, initialized in the beginning of
- * ctrl_high_speed_serdes_phy_config
- */
-struct serdes_map serdes_configuration_map[MAX_SERDES_LANES];
/*
* serdes_seq_db - holds all serdes sequences, their size and the
@@ -1362,7 +1357,8 @@ enum serdes_seq serdes_type_and_speed_to_speed_seq(enum serdes_type serdes_type,
return seq_id;
}
-void print_topology_details(const struct serdes_map *serdes_map_array)
+static void print_topology_details(const struct serdes_map *serdes_map,
+ u8 count)
{
u32 lane_num;
@@ -1370,16 +1366,16 @@ void print_topology_details(const struct serdes_map *serdes_map_array)
DEBUG_INIT_S(" | Lane # | Speed | Type |\n");
DEBUG_INIT_S(" --------------------------------\n");
- for (lane_num = 0; lane_num < hws_serdes_get_max_lane(); lane_num++) {
- if (serdes_map_array[lane_num].serdes_type == DEFAULT_SERDES)
+ for (lane_num = 0; lane_num < count; lane_num++) {
+ if (serdes_map[lane_num].serdes_type == DEFAULT_SERDES)
continue;
DEBUG_INIT_S(" | ");
DEBUG_INIT_D(hws_get_physical_serdes_num(lane_num), 1);
DEBUG_INIT_S(" | ");
- DEBUG_INIT_D(serdes_map_array[lane_num].serdes_speed, 2);
+ DEBUG_INIT_D(serdes_map[lane_num].serdes_speed, 2);
DEBUG_INIT_S(" | ");
DEBUG_INIT_S((char *)
- serdes_type_to_string[serdes_map_array[lane_num].
+ serdes_type_to_string[serdes_map[lane_num].
serdes_type]);
DEBUG_INIT_S("\t|\n");
}
@@ -1413,6 +1409,9 @@ int hws_pre_serdes_init_config(void)
int serdes_phy_config(void)
{
+ struct serdes_map *serdes_map;
+ u8 serdes_count;
+
DEBUG_INIT_FULL_S("\n### ctrl_high_speed_serdes_phy_config ###\n");
DEBUG_INIT_S("High speed PHY - Version: ");
@@ -1428,17 +1427,21 @@ int serdes_phy_config(void)
/* Board topology load */
DEBUG_INIT_FULL_S
("ctrl_high_speed_serdes_phy_config: Loading board topology..\n");
- CHECK_STATUS(hws_board_topology_load(serdes_configuration_map));
+ CHECK_STATUS(hws_board_topology_load(&serdes_map, &serdes_count));
+ if (serdes_count > hws_serdes_get_max_lane()) {
+ printf("Error: too many serdes lanes specified by board\n");
+ return MV_FAIL;
+ }
/* print topology */
- print_topology_details(serdes_configuration_map);
+ print_topology_details(serdes_map, serdes_count);
CHECK_STATUS(hws_pre_serdes_init_config());
/* Power-Up sequence */
DEBUG_INIT_FULL_S
("ctrl_high_speed_serdes_phy_config: Starting serdes power up sequence\n");
- CHECK_STATUS(hws_power_up_serdes_lanes(serdes_configuration_map));
+ CHECK_STATUS(hws_power_up_serdes_lanes(serdes_map, serdes_count));
DEBUG_INIT_FULL_S
("\n### ctrl_high_speed_serdes_phy_config ended successfully ###\n");
@@ -1462,7 +1465,7 @@ int serdes_polarity_config(u32 serdes_num, int is_rx)
return MV_OK;
}
-int hws_power_up_serdes_lanes(const struct serdes_map *serdes_config_map)
+int hws_power_up_serdes_lanes(struct serdes_map *serdes_map, u8 count)
{
u32 serdes_id, serdes_lane_num;
enum ref_clock ref_clock;
@@ -1484,22 +1487,21 @@ int hws_power_up_serdes_lanes(const struct serdes_map *serdes_config_map)
/* COMMON PHYS SELECTORS register configuration */
DEBUG_INIT_FULL_S
("hws_power_up_serdes_lanes: Updating COMMON PHYS SELECTORS reg\n");
- CHECK_STATUS(hws_update_serdes_phy_selectors(serdes_configuration_map));
+ CHECK_STATUS(hws_update_serdes_phy_selectors(serdes_map, count));
/* per Serdes Power Up */
- for (serdes_id = 0; serdes_id < hws_serdes_get_max_lane();
- serdes_id++) {
+ for (serdes_id = 0; serdes_id < count; serdes_id++) {
DEBUG_INIT_FULL_S
("calling serdes_power_up_ctrl: serdes lane number ");
DEBUG_INIT_FULL_D_10(serdes_lane_num, 1);
DEBUG_INIT_FULL_S("\n");
serdes_lane_num = hws_get_physical_serdes_num(serdes_id);
- serdes_type = serdes_config_map[serdes_id].serdes_type;
- serdes_speed = serdes_config_map[serdes_id].serdes_speed;
- serdes_mode = serdes_config_map[serdes_id].serdes_mode;
- serdes_rx_polarity_swap = serdes_config_map[serdes_id].swap_rx;
- serdes_tx_polarity_swap = serdes_config_map[serdes_id].swap_tx;
+ serdes_type = serdes_map[serdes_id].serdes_type;
+ serdes_speed = serdes_map[serdes_id].serdes_speed;
+ serdes_mode = serdes_map[serdes_id].serdes_mode;
+ serdes_rx_polarity_swap = serdes_map[serdes_id].swap_rx;
+ serdes_tx_polarity_swap = serdes_map[serdes_id].swap_tx;
/* serdes lane is not in use */
if (serdes_type == DEFAULT_SERDES)
@@ -1534,10 +1536,10 @@ int hws_power_up_serdes_lanes(const struct serdes_map *serdes_config_map)
/* Set PEX_TX_CONFIG_SEQ sequence for PEXx4 mode.
After finish the Power_up sequence for all lanes,
the lanes should be released from reset state. */
- CHECK_STATUS(hws_pex_tx_config_seq(serdes_config_map));
+ CHECK_STATUS(hws_pex_tx_config_seq(serdes_map, count));
/* PEX configuration */
- CHECK_STATUS(hws_pex_config(serdes_config_map));
+ CHECK_STATUS(hws_pex_config(serdes_map, count));
}
/* USB2 configuration */
@@ -1905,7 +1907,7 @@ int serdes_power_up_ctrl(u32 serdes_num, int serdes_power_up,
return MV_OK;
}
-int hws_update_serdes_phy_selectors(struct serdes_map *serdes_config_map)
+int hws_update_serdes_phy_selectors(struct serdes_map *serdes_map, u8 count)
{
u32 lane_data, idx, serdes_lane_hw_num, reg_data = 0;
enum serdes_type serdes_type;
@@ -1927,10 +1929,9 @@ int hws_update_serdes_phy_selectors(struct serdes_map *serdes_config_map)
* Updating bits 0-17 in the COMMON PHYS SELECTORS register
* according to the serdes types
*/
- for (idx = 0; idx < hws_serdes_get_max_lane();
- idx++) {
- serdes_type = serdes_config_map[idx].serdes_type;
- serdes_mode = serdes_config_map[idx].serdes_mode;
+ for (idx = 0; idx < count; idx++) {
+ serdes_type = serdes_map[idx].serdes_type;
+ serdes_mode = serdes_map[idx].serdes_mode;
serdes_lane_hw_num = hws_get_physical_serdes_num(idx);
lane_data =
@@ -1942,7 +1943,7 @@ int hws_update_serdes_phy_selectors(struct serdes_map *serdes_config_map)
if (hws_serdes_topology_verify
(serdes_type, idx, serdes_mode) != MV_OK) {
- serdes_config_map[idx].serdes_type =
+ serdes_map[idx].serdes_type =
DEFAULT_SERDES;
printf("%s: SerDes lane #%d is disabled\n", __func__,
serdes_lane_hw_num);
@@ -1968,8 +1969,7 @@ int hws_update_serdes_phy_selectors(struct serdes_map *serdes_config_map)
printf
("%s: Warning: SerDes lane #%d and type %d are not supported together\n",
__func__, serdes_lane_hw_num, serdes_mode);
- serdes_config_map[idx].serdes_type =
- DEFAULT_SERDES;
+ serdes_map[idx].serdes_type = DEFAULT_SERDES;
printf("%s: SerDes lane #%d is disabled\n", __func__,
serdes_lane_hw_num);
continue;
@@ -1991,7 +1991,7 @@ int hws_update_serdes_phy_selectors(struct serdes_map *serdes_config_map)
/* Print topology */
if (updated_topology_print)
- print_topology_details(serdes_config_map);
+ print_topology_details(serdes_map, count);
/*
* Updating the PEXx4 Enable bit in the COMMON PHYS SELECTORS
@@ -2145,7 +2145,7 @@ int hws_ref_clock_set(u32 serdes_num, enum serdes_type serdes_type,
* RETURNS: MV_OK - for success
* MV_BAD_PARAM - for fail
*/
-int hws_pex_tx_config_seq(const struct serdes_map *serdes_map)
+int hws_pex_tx_config_seq(const struct serdes_map *serdes_map, u8 count)
{
enum serdes_mode serdes_mode;
u32 serdes_lane_id, serdes_lane_hw_num;
@@ -2159,8 +2159,7 @@ int hws_pex_tx_config_seq(const struct serdes_map *serdes_map)
*/
/* relese pipe soft reset for all lanes */
- for (serdes_lane_id = 0; serdes_lane_id < hws_serdes_get_max_lane();
- serdes_lane_id++) {
+ for (serdes_lane_id = 0; serdes_lane_id < count; serdes_lane_id++) {
serdes_mode = serdes_map[serdes_lane_id].serdes_mode;
serdes_lane_hw_num =
hws_get_physical_serdes_num(serdes_lane_id);
@@ -2173,8 +2172,7 @@ int hws_pex_tx_config_seq(const struct serdes_map *serdes_map)
}
/* set phy soft reset for all lanes */
- for (serdes_lane_id = 0; serdes_lane_id < hws_serdes_get_max_lane();
- serdes_lane_id++) {
+ for (serdes_lane_id = 0; serdes_lane_id < count; serdes_lane_id++) {
serdes_mode = serdes_map[serdes_lane_id].serdes_mode;
serdes_lane_hw_num =
hws_get_physical_serdes_num(serdes_lane_id);
@@ -2186,8 +2184,7 @@ int hws_pex_tx_config_seq(const struct serdes_map *serdes_map)
}
/* set phy soft reset for all lanes */
- for (serdes_lane_id = 0; serdes_lane_id < hws_serdes_get_max_lane();
- serdes_lane_id++) {
+ for (serdes_lane_id = 0; serdes_lane_id < count; serdes_lane_id++) {
serdes_mode = serdes_map[serdes_lane_id].serdes_mode;
serdes_lane_hw_num =
hws_get_physical_serdes_num(serdes_lane_id);
diff --git a/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.h b/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.h
index 5f3b9d801b..3513770bd2 100644
--- a/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.h
+++ b/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.h
@@ -215,12 +215,12 @@ extern u8 selectors_serdes_rev2_map[LAST_SERDES_TYPE][MAX_SERDES_LANES];
u8 hws_ctrl_serdes_rev_get(void);
int mv_update_serdes_select_phy_mode_seq(void);
-int hws_board_topology_load(struct serdes_map *serdes_map_array);
+int hws_board_topology_load(struct serdes_map **serdes_map, u8 *count);
enum serdes_seq serdes_type_and_speed_to_speed_seq(enum serdes_type serdes_type,
enum serdes_speed baud_rate);
int hws_serdes_seq_init(void);
int hws_serdes_seq_db_init(void);
-int hws_power_up_serdes_lanes(const struct serdes_map *serdes_config_map);
+int hws_power_up_serdes_lanes(struct serdes_map *serdes_map, u8 count);
int hws_ctrl_high_speed_serdes_phy_config(void);
int serdes_power_up_ctrl(u32 serdes_num, int serdes_power_up,
enum serdes_type serdes_type,
@@ -237,14 +237,14 @@ int hws_serdes_pex_ref_clock_get(enum serdes_type serdes_type,
enum ref_clock *ref_clock);
int hws_ref_clock_set(u32 serdes_num, enum serdes_type serdes_type,
enum ref_clock ref_clock);
-int hws_update_serdes_phy_selectors(struct serdes_map *serdes_config_map);
+int hws_update_serdes_phy_selectors(struct serdes_map *serdes_map, u8 count);
u32 hws_serdes_get_phy_selector_val(int serdes_num,
enum serdes_type serdes_type);
u32 hws_serdes_get_ref_clock_val(enum serdes_type serdes_type);
u32 hws_serdes_get_max_lane(void);
int hws_get_ext_base_addr(u32 serdes_num, u32 base_addr, u32 unit_base_offset,
u32 *unit_base_reg, u32 *unit_offset);
-int hws_pex_tx_config_seq(const struct serdes_map *serdes_map);
+int hws_pex_tx_config_seq(const struct serdes_map *serdes_map, u8 count);
u32 hws_get_physical_serdes_num(u32 serdes_num);
int hws_is_serdes_active(u8 lane_num);