diff options
| author | Martyn Welch <martyn.welch@collabora.co.uk> | 2018-01-10 20:31:32 +0100 |
|---|---|---|
| committer | Stefano Babic <sbabic@denx.de> | 2018-02-04 12:00:58 +0100 |
| commit | 6d6564957ced9a29ca62adee68a6e24040dd54be (patch) | |
| tree | a12113e64caee0a7c072657bced15d3533a81aa4 /board/ge | |
| parent | 2850645cabef6d401415a9787736d642017ec3f5 (diff) | |
board: ge: bx50v3: Enable hardware watchdog
Enable the hardware watchdog on bx50v3 to cause it to reset in the event
the board hangs.
Configure GPIO_9 pin as WDOG1_B so that a watchdog timeout results in a
full system reset.
The watchdog is used and reconfigured by systemd approximately 1.7 seconds
into boot. Adding a few seconds for U-Boot and a few more seconds as a
safety margin.
Note that the PCIe controller is _not_ put back into a safe state prior
to board reset. This is a problem if board reset is implemented as CPU
reset.
Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Diffstat (limited to 'board/ge')
| -rw-r--r-- | board/ge/bx50v3/bx50v3.c | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/board/ge/bx50v3/bx50v3.c b/board/ge/bx50v3/bx50v3.c index 07b42988e4..48c26e0f9f 100644 --- a/board/ge/bx50v3/bx50v3.c +++ b/board/ge/bx50v3/bx50v3.c @@ -659,6 +659,7 @@ static iomux_v3_cfg_t const misc_pads[] = { MX6_PAD_EIM_OE__GPIO2_IO25 | MUX_PAD_CTRL(NC_PAD_CTRL), MX6_PAD_EIM_BCLK__GPIO6_IO31 | MUX_PAD_CTRL(NC_PAD_CTRL), MX6_PAD_GPIO_1__GPIO1_IO01 | MUX_PAD_CTRL(NC_PAD_CTRL), + MX6_PAD_GPIO_9__WDOG1_B | MUX_PAD_CTRL(NC_PAD_CTRL), }; #define SUS_S3_OUT IMX_GPIO_NR(4, 11) #define WIFI_EN IMX_GPIO_NR(6, 14) |