PowerPC: Update MIP405/MIP405T to use Kconfig better

Convert CONFIG_MIP405T from SYS_EXTRA_OPTIONS to a real config

There are two boards, MIP405 and MIP405T that have a few differences.
Start by checking for CONFIG_TARGET_MIP405.  Then introduce
CONFIG_TARGET_MIP405T and use that not CONFIG_MIP405T.  Next, convert
also convert the usage of CONFIG_ISO_STRING to be based on Kconfig.

Signed-off-by: Tom Rini <trini@konsulko.com>

6 files changed, 24 insertions, 21 deletions

diff --git a/board/mpl/common/common_util.c b/board/mpl/common/common_util.c
index 226217570c..3c110fad15 100644
--- a/board/mpl/common/common_util.c
+++ b/board/mpl/common/common_util.c
@@ -20,7 +20,7 @@
 #include "../pip405/pip405.h"
 #include <asm/4xx_pci.h>
 #endif
-#ifdef CONFIG_MIP405
+#if defined(CONFIG_TARGET_MIP405) || defined(CONFIG_TARGET_MIP405T)
 #include "../mip405/mip405.h"
 #include <asm/4xx_pci.h>
 #endif
@@ -36,7 +36,8 @@ extern int mem_test(ulong start, ulong ramsize, int quiet);
 #define I2C_BACKUP_ADDR 0x7C00		/* 0x200 bytes for backup */
 #define IMAGE_SIZE CONFIG_SYS_MONITOR_LEN	/* ugly, but it works for now */
 
-#if defined(CONFIG_PIP405) || defined(CONFIG_MIP405)
+#if defined(CONFIG_PIP405) || defined(CONFIG_TARGET_MIP405) \
+	|| defined(CONFIG_TARGET_MIP405T)
 /*-----------------------------------------------------------------------
  * On PIP/MIP405 we have 3 (4) possible boot mode
  *
@@ -116,7 +117,7 @@ void setup_cs_reloc(void)
 		mtdcr(EBC0_CFGDATA, FLASH_CR_B);
 	}
 }
-#endif /* #if defined(CONFIG_PIP405) || defined(CONFIG_MIP405) */
+#endif /* #if defined(CONFIG_PIP405) || defined(CONFIG_TARGET_MIP405) */
 
 #ifdef CONFIG_SYS_UPDATE_FLASH_SIZE
 /* adjust flash start and protection info */
@@ -190,12 +191,11 @@ mpl_prg(uchar *src, ulong size)
 #if defined(CONFIG_PATI)
 	int start_sect;
 #endif
-#if defined(CONFIG_PIP405) || defined(CONFIG_MIP405) || defined(CONFIG_PATI)
+#if defined(CONFIG_PIP405) || defined(CONFIG_TARGET_MIP405) \
+		|| defined(CONFIG_TARGET_MIP405T) || defined(CONFIG_PATI)
 	char *copystr = (char *)src;
 	ulong *magic = (ulong *)src;
-#endif
 
-#if defined(CONFIG_PIP405) || defined(CONFIG_MIP405) || defined(CONFIG_PATI)
 	if (uimage_to_cpu (magic[0]) != IH_MAGIC) {
 		puts("Bad Magic number\n");
 		return -1;
@@ -241,7 +241,7 @@ mpl_prg(uchar *src, ulong size)
 		return (1);
 	}
 
-#else /* #if !defined(CONFIG_PATI */
+#else /* #if !defined(CONFIG_PATI) */
 	start = FIRM_START;
 	start_sect = -1;
 
@@ -701,7 +701,7 @@ void video_get_info_str (int line_number, char *info)
 			strcpy(buf,"### No HW ID - assuming PIP405");
 		}
 #endif
-#ifdef CONFIG_MIP405
+#if defined(CONFIG_TARGET_MIP405) || defined(CONFIG_TARGET_MIP405T)
 		if (!s || strncmp (s, "MIP405", 6)) {
 			strcpy(buf,"### No HW ID - assuming MIP405");
 		}
diff --git a/board/mpl/common/common_util.h b/board/mpl/common/common_util.h
index e81ee35eb8..22f5c2e6d8 100644
--- a/board/mpl/common/common_util.h
+++ b/board/mpl/common/common_util.h
@@ -17,12 +17,10 @@ extern flash_info_t flash_info[];	/* info for FLASH chips */
 
 void get_backup_values(backup_t *buf);
 
-#if defined(CONFIG_PIP405) || defined(CONFIG_MIP405)
 #define BOOT_MPS	0x01
 #define BOOT_PCI	0x02
 int get_boot_mode(void);
 void setup_cs_reloc(void);
-#endif
 
 void check_env(void);
 #if defined(CONFIG_CMD_DOC)
diff --git a/board/mpl/common/pci_parts.h b/board/mpl/common/pci_parts.h
index 4193e9233c..75e8cae6d7 100644
--- a/board/mpl/common/pci_parts.h
+++ b/board/mpl/common/pci_parts.h
@@ -91,7 +91,7 @@ static struct pci_pip405_config_entry piix4_isa_bridge_f0[] = {
 static struct pci_pip405_config_entry piix4_ide_cntrl_f1[] = {
 	{PCI_CFG_PIIX4_BMIBA,	0x0001000,	4}, /* set BMI to a valid address */
 	{PCI_COMMAND,		0x0001,		2}, /* enable IO access	*/
-#if !defined(CONFIG_MIP405T)
+#if !defined(CONFIG_TARGET_MIP405T)
 	{PCI_CFG_PIIX4_IDETIM,	0x80008000,	4}, /* enable Both IDE channels	*/
 #else
 	{PCI_CFG_PIIX4_IDETIM,	0x00008000,	4}, /* enable IDE channel0	*/
@@ -101,7 +101,7 @@ static struct pci_pip405_config_entry piix4_ide_cntrl_f1[] = {
 
 /* PIIX4 USB Controller Function 2 */
 static struct pci_pip405_config_entry piix4_usb_cntrl_f2[] = {
-#if !defined(CONFIG_MIP405T)
+#if !defined(CONFIG_TARGET_MIP405T)
 	{PCI_INTERRUPT_LINE,	31,		1}, /* Int vector = 31		*/
 	{PCI_BASE_ADDRESS_4,	0x0000E001,	4}, /* Set IO Address to 0xe000 to 0xe01F */
 	{PCI_LATENCY_TIMER,	0x80,		1}, /* Latency Timer 0x80	*/
diff --git a/board/mpl/mip405/Kconfig b/board/mpl/mip405/Kconfig
index 48ba91a529..e003a43d57 100644
--- a/board/mpl/mip405/Kconfig
+++ b/board/mpl/mip405/Kconfig
@@ -1,4 +1,4 @@
-if TARGET_MIP405
+if TARGET_MIP405 || TARGET_MIP405T
 
 config SYS_BOARD
 	default "mip405"
@@ -9,4 +9,9 @@ config SYS_VENDOR
 config SYS_CONFIG_NAME
 	default "MIP405"
 
+config ISO_STRING
+	string
+	default "MEV-10082-001" if TARGET_MIP405T
+	default "MEV-10072-001" if TARGET_MIP405
+
 endif
diff --git a/board/mpl/mip405/mip405.c b/board/mpl/mip405/mip405.c
index 4a0d6966a6..8b9892b868 100644
--- a/board/mpl/mip405/mip405.c
+++ b/board/mpl/mip405/mip405.c
@@ -92,7 +92,7 @@ typedef struct {
 	unsigned char sz;		/* log binary => Size = (4MByte<<sz) 5 = 128, 4 = 64, 3 = 32, 2 = 16, 1=8 */
 	unsigned char ecc;		/* if true, ecc is enabled */
 } sdram_t;
-#if defined(CONFIG_MIP405T)
+#if defined(CONFIG_TARGET_MIP405T)
 const sdram_t sdram_table[] = {
 	{ 0x0F,	/* MIP405T Rev A, 64MByte -1 Board */
 		3,	/* Case Latenty = 3 */
@@ -168,7 +168,7 @@ const sdram_t sdram_table[] = {
 	  0xff,
 	  0xff }
 };
-#endif /*CONFIG_MIP405T */
+#endif /*CONFIG_TARGET_MIP405T */
 void SDRAM_err (const char *s)
 {
 #ifndef SDRAM_DEBUG
@@ -262,7 +262,7 @@ int init_sdram (void)
 #endif
 	/* check board */
 	bc = in8 (PLD_PART_REG);
-#if defined(CONFIG_MIP405T)
+#if defined(CONFIG_TARGET_MIP405T)
 	if((bc & 0x80)==0)
 		SDRAM_err ("U-Boot configured for a MIP405T not for a MIP405!!!\n");
 #else
@@ -543,7 +543,7 @@ void ide_set_reset (int idereset)
 
 void get_pcbrev_var(unsigned char *pcbrev, unsigned char *var)
 {
-#if !defined(CONFIG_MIP405T)
+#if !defined(CONFIG_TARGET_MIP405T)
 	unsigned char bc,rc,tmp;
 	int i;
 
@@ -575,7 +575,7 @@ void get_pcbrev_var(unsigned char *pcbrev, unsigned char *var)
  * Check Board Identity:
  */
 /* serial String: "MIP405_1000" OR "MIP405T_1000" */
-#if !defined(CONFIG_MIP405T)
+#if !defined(CONFIG_TARGET_MIP405T)
 #define BOARD_NAME	"MIP405"
 #else
 #define BOARD_NAME	"MIP405T"
@@ -777,7 +777,7 @@ void print_mip405_info (void)
 			(cfg >> 1) & 0x1, (cfg >> 2) & 0x1, (cfg >> 3) & 0x1);
 	printf ("User LED %s\n", (com_mode & 0x4) ? "on" : "off");
 	printf ("UART Clocks %d\n", (com_mode >> 4) & 0x3);
-#if !defined(CONFIG_MIP405T)
+#if !defined(CONFIG_TARGET_MIP405T)
 	printf ("User Config Switch %d %d %d %d %d %d %d %d\n",
 			(ext) & 0x1, (ext >> 1) & 0x1, (ext >> 2) & 0x1,
 			(ext >> 3) & 0x1, (ext >> 4) & 0x1, (ext >> 5) & 0x1,
@@ -793,7 +793,7 @@ void print_mip405_info (void)
 	printf ("IDE Reset %s\n", (ext & 0x01) ? "asserted" : "not asserted");
 	printf ("IRQs:\n");
 	printf ("  PIIX INTR: %s\n", (irq_reg & 0x80) ? "inactive" : "active");
-#if !defined(CONFIG_MIP405T)
+#if !defined(CONFIG_TARGET_MIP405T)
 	printf ("  UART0 IRQ: %s\n", (irq_reg & 0x40) ? "inactive" : "active");
 	printf ("  UART1 IRQ: %s\n", (irq_reg & 0x20) ? "inactive" : "active");
 #endif
diff --git a/board/mpl/pati/pati.h b/board/mpl/pati/pati.h
index 2600bba101..2938056044 100644
--- a/board/mpl/pati/pati.h
+++ b/board/mpl/pati/pati.h
@@ -201,7 +201,7 @@
 #define PCI_VENDOR_ID_MPL	0x18E6
 #define PCI_DEVICE_ID_PATI	0x00DA
 
-#if defined(CONFIG_MIP405)
+#if defined(CONFIG_TARGET_MIP405) || defined(CONFIG_TARGET_MIP405T)
 #define PATI_FIRMWARE_START_OFFSET	0x00300000
 #define PATI_ISO_STRING  "MEV-10084-001"
 #endif