powerpc, 5xxx, 512x: remove support for mpc5xxx and mpc512x

There was for long time no activity in the mpx5xxx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in mpc5xxx,
so remove it.

Signed-off-by: Heiko Schocher <hs@denx.de>

6 files changed, 0 insertions, 299 deletions

diff --git a/board/phytec/pcm030/Kconfig b/board/phytec/pcm030/Kconfig
deleted file mode 100644
index 3a3eab8576..0000000000
--- a/board/phytec/pcm030/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_PCM030
-
-config SYS_BOARD
-	default "pcm030"
-
-config SYS_VENDOR
-	default "phytec"
-
-config SYS_CONFIG_NAME
-	default "pcm030"
-
-endif
diff --git a/board/phytec/pcm030/MAINTAINERS b/board/phytec/pcm030/MAINTAINERS
deleted file mode 100644
index 4e2ab0d64e..0000000000
--- a/board/phytec/pcm030/MAINTAINERS
+++ /dev/null
@@ -1,7 +0,0 @@
-PCM030 BOARD
-M:	Jon Smirl <jonsmirl@gmail.com>
-S:	Maintained
-F:	board/phytec/pcm030/
-F:	include/configs/pcm030.h
-F:	configs/pcm030_defconfig
-F:	configs/pcm030_LOWBOOT_defconfig
diff --git a/board/phytec/pcm030/Makefile b/board/phytec/pcm030/Makefile
deleted file mode 100644
index 2bb49dc7aa..0000000000
--- a/board/phytec/pcm030/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2003-2007
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= pcm030.o
diff --git a/board/phytec/pcm030/README b/board/phytec/pcm030/README
deleted file mode 100644
index 05faab68c8..0000000000
--- a/board/phytec/pcm030/README
+++ /dev/null
@@ -1,42 +0,0 @@
-To build RAMBOOT, replace this section the main Makefile
-
-pcm030_config \
-pcm030_RAMBOOT_config \
-pcm030_LOWBOOT_config:	unconfig
-	@ >include/config.h
-	@[ -z "$(findstring LOWBOOT_,$@)" ] || \
-		{ echo "CONFIG_SYS_TEXT_BASE = 0xFF000000"	>board/phytec/pcm030/config.tmp ; \
-		  echo "... with LOWBOOT configuration" ; \
-		}
-	@[ -z "$(findstring RAMBOOT_,$@)" ] || \
-	       { echo "CONFIG_SYS_TEXT_BASE = 0x00100000" >board/phycore_mpc5200b_tiny/\
-			config.tmp ; \
-		 echo "... with RAMBOOT configuration" ; \
-		 echo "... remember to make sure that MBAR is already \
-				switched to 0xF0000000 !!!" ; \
-	       }
-	@$(MKCONFIG) -a pcm030 ppc mpc5xxx pcm030 phytec
-	@ echo "remember to set pcm030_REV to 0 for rev 1245.0 rev or to 1 for rev 1245.1"
-
-Alternative SDRAM settings:
-
-#define SDRAM_MODE	0x018D0000
-#define SDRAM_EMODE	0x40090000
-#define SDRAM_CONTROL	0x715f0f00
-#define SDRAM_CONFIG1	0x73722930
-#define SDRAM_CONFIG2	0x47770000
-
-/* Settings for XLB = 99 MHz */
-#define SDRAM_MODE	0x008D0000
-#define SDRAM_EMODE	0x40090000
-#define SDRAM_CONTROL	0x714b0f00
-#define SDRAM_CONFIG1	0x63611730
-#define SDRAM_CONFIG2	0x47670000
-
-The board ships default with the environment in EEPROM
-Moving the environment to flash can be more reliable
-
-#define CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0xfe0000)
-#define CONFIG_ENV_SIZE		0x20000
-#define CONFIG_ENV_SECT_SIZE	0x20000
diff --git a/board/phytec/pcm030/mt46v32m16-75.h b/board/phytec/pcm030/mt46v32m16-75.h
deleted file mode 100644
index 47fc7c04bd..0000000000
--- a/board/phytec/pcm030/mt46v32m16-75.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
- *
- * Eric Schumann, Phytec Messtechnik
- * adapted for mt46v32m16-75 DDR-RAM
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#define SDRAM_DDR	1		/* is DDR */
-
-/* Settings for XLB = 132 MHz */
-
-#define SDRAM_MODE	0x018D0000
-#define SDRAM_EMODE	0x40090000
-#define SDRAM_CONTROL	0x71500F00
-#define SDRAM_CONFIG1	0x73711930
-#define SDRAM_CONFIG2	0x47770000
-
-#define SDRAM_TAPDELAY	0x10000000 /* reserved Bit in MPC5200 B3-Step */
diff --git a/board/phytec/pcm030/pcm030.c b/board/phytec/pcm030/pcm030.c
deleted file mode 100644
index bdd980da91..0000000000
--- a/board/phytec/pcm030/pcm030.c
+++ /dev/null
@@ -1,209 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
- *
- * (C) Copyright 2006
- * Eric Schumann, Phytec Messtechnik GmbH
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc5xxx.h>
-#include <pci.h>
-#include <asm/io.h>
-
-#include "mt46v32m16-75.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifndef CONFIG_SYS_RAMBOOT
-static void sdram_start(int hi_addr)
-{
-	volatile struct mpc5xxx_cdm *cdm =
-		(struct mpc5xxx_cdm *)MPC5XXX_CDM;
-	volatile struct mpc5xxx_sdram *sdram =
-		(struct mpc5xxx_sdram *)MPC5XXX_SDRAM;
-
-	long hi_addr_bit = hi_addr ? 0x01000000 : 0;
-
-	/* unlock mode register */
-	out_be32 (&sdram->ctrl,
-		(SDRAM_CONTROL | 0x80000000 | hi_addr_bit));
-
-	/* precharge all banks */
-	out_be32 (&sdram->ctrl,
-		(SDRAM_CONTROL | 0x80000002 | hi_addr_bit));
-
-#ifdef SDRAM_DDR
-	/* set mode register: extended mode */
-	out_be32 (&sdram->mode, (SDRAM_EMODE));
-
-	/* set mode register: reset DLL */
-	out_be32 (&sdram->mode,
-		(SDRAM_MODE | 0x04000000));
-#endif
-
-	/* precharge all banks */
-	out_be32 (&sdram->ctrl,
-		(SDRAM_CONTROL | 0x80000002 | hi_addr_bit));
-
-	/* auto refresh */
-	out_be32 (&sdram->ctrl,
-		(SDRAM_CONTROL | 0x80000004 | hi_addr_bit));
-
-	/* set mode register */
-	out_be32 (&sdram->mode, (SDRAM_MODE));
-
-	/* normal operation */
-	out_be32 (&sdram->ctrl,
-		(SDRAM_CONTROL | hi_addr_bit));
-
-	/* set CDM clock enable register, set MPC5200B SDRAM bus */
-	/* to reduced driver strength */
-	out_be32 (&cdm->clock_enable, (0x00CFFFFF));
-}
-#endif
-
-/*
- * ATTENTION: Although partially referenced dram_init does NOT make
- *	real use of CONFIG_SYS_SDRAM_BASE. The code does not
- *	work if CONFIG_SYS_SDRAM_BASE
- *	is something else than 0x00000000.
- */
-
-int dram_init(void)
-{
-	volatile struct mpc5xxx_mmap_ctl *mm =
-		(struct mpc5xxx_mmap_ctl *)CONFIG_SYS_MBAR;
-	volatile struct mpc5xxx_cdm *cdm =
-		(struct mpc5xxx_cdm *)MPC5XXX_CDM;
-	volatile struct mpc5xxx_sdram *sdram =
-		(struct mpc5xxx_sdram *)MPC5XXX_SDRAM;
-	ulong dramsize = 0;
-	ulong dramsize2 = 0;
-#ifndef CONFIG_SYS_RAMBOOT
-	ulong test1, test2;
-
-	/* setup SDRAM chip selects */
-							 /* 256MB at 0x0 */
-	out_be32 (&mm->sdram0, 0x0000001b);
-							 /* disabled */
-	out_be32 (&mm->sdram1, 0x10000000);
-
-	/* setup config registers */
-	out_be32 (&sdram->config1, SDRAM_CONFIG1);
-	out_be32 (&sdram->config2, SDRAM_CONFIG2);
-
-#if defined(SDRAM_DDR) && defined(SDRAM_TAPDELAY)
-	/* set tap delay */
-	out_be32 (&cdm->porcfg, SDRAM_TAPDELAY);
-#endif
-
-	/* find RAM size using SDRAM CS0 only */
-	sdram_start(0);
-	test1 = get_ram_size((long *) CONFIG_SYS_SDRAM_BASE, 0x10000000);
-	sdram_start(1);
-	test2 = get_ram_size((long *) CONFIG_SYS_SDRAM_BASE, 0x10000000);
-	if (test1 > test2) {
-		sdram_start(0);
-		dramsize = test1;
-	} else
-		dramsize = test2;
-
-	/* memory smaller than 1MB is impossible */
-	if (dramsize < (1 << 20))
-		dramsize = 0;
-
-	/* set SDRAM CS0 size according to the amount of RAM found */
-	if (dramsize > 0) {
-		out_be32 (&mm->sdram0,
-			(0x13 + __builtin_ffs(dramsize >> 20) - 1));
-	} else {
-							/* disabled */
-		out_be32 (&mm->sdram0, 0);
-	}
-
-#else /* CONFIG_SYS_RAMBOOT */
-
-	/* retrieve size of memory connected to SDRAM CS0 */
-	dramsize = in_be32(&mm->sdram0) & 0xFF;
-	if (dramsize >= 0x13)
-		dramsize = (1 << (dramsize - 0x13)) << 20;
-	else
-		dramsize = 0;
-
-	/* retrieve size of memory connected to SDRAM CS1 */
-	dramsize2 = in_be32(&mm->sdram1) & 0xFF;
-	if (dramsize2 >= 0x13)
-		dramsize2 = (1 << (dramsize2 - 0x13)) << 20;
-	else
-		dramsize2 = 0;
-
-#endif /* CONFIG_SYS_RAMBOOT */
-
-	gd->ram_size = dramsize + dramsize2;
-
-	return 0;
-}
-
-int checkboard(void)
-{
-	puts("Board: phyCORE-MPC5200B-tiny\n");
-	return 0;
-}
-
-#ifdef CONFIG_PCI
-static struct pci_controller hose;
-
-extern void pci_mpc5xxx_init(struct pci_controller *);
-
-void pci_init_board(void)
-{
-	pci_mpc5xxx_init(&hose);
-}
-#endif
-
-#ifdef CONFIG_OF_BOARD_SETUP
-int ft_board_setup(void *blob, bd_t *bd)
-{
-	ft_cpu_setup(blob, bd);
-
-	return 0;
-}
-#endif /* CONFIG_OF_BOARD_SETUP */
-
-#if defined(CONFIG_IDE) && defined(CONFIG_IDE_RESET)
-
-#define GPIO_PSC2_4	0x02000000UL
-
-void init_ide_reset(void)
-{
-	volatile struct mpc5xxx_wu_gpio *wu_gpio =
-		(struct mpc5xxx_wu_gpio *)MPC5XXX_WU_GPIO;
-	debug("init_ide_reset\n");
-
-	/* Configure PSC2_4 as GPIO output for ATA reset */
-	setbits_be32(&wu_gpio->enable, GPIO_PSC2_4);
-	setbits_be32(&wu_gpio->ddr, GPIO_PSC2_4);
-	/* Deassert reset */
-	setbits_be32(&wu_gpio->dvo, GPIO_PSC2_4);
-}
-
-void ide_set_reset(int idereset)
-{
-	volatile struct mpc5xxx_wu_gpio *wu_gpio =
-		(struct mpc5xxx_wu_gpio *)MPC5XXX_WU_GPIO;
-	debug("ide_reset(%d)\n", idereset);
-
-	if (idereset) {
-		clrbits_be32(&wu_gpio->dvo, GPIO_PSC2_4);
-		/* Make a delay. MPC5200 spec says 25 usec min */
-		udelay(500000);
-	} else
-		setbits_be32(&wu_gpio->dvo, GPIO_PSC2_4);
-}
-#endif /* defined(CONFIG_IDE) && defined(CONFIG_IDE_RESET) */