arm: Remove zipitz2 board

Per discussion on the list, drop this board again.

Cc: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Vasily Khoruzhick <anarsoul@gmail.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>

4 files changed, 0 insertions, 242 deletions

diff --git a/board/zipitz2/Kconfig b/board/zipitz2/Kconfig
deleted file mode 100644
index c6635040a3..0000000000
--- a/board/zipitz2/Kconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-if TARGET_ZIPITZ2
-
-config SYS_BOARD
-	default "zipitz2"
-
-config SYS_CONFIG_NAME
-	default "zipitz2"
-
-endif
diff --git a/board/zipitz2/MAINTAINERS b/board/zipitz2/MAINTAINERS
deleted file mode 100644
index e027cd361a..0000000000
--- a/board/zipitz2/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-ZIPITZ2 BOARD
-M:	Vasily Khoruzhick <anarsoul@gmail.com>
-S:	Maintained
-F:	board/zipitz2/
-F:	include/configs/zipitz2.h
-F:	configs/zipitz2_defconfig
diff --git a/board/zipitz2/Makefile b/board/zipitz2/Makefile
deleted file mode 100644
index 2bbe4364e8..0000000000
--- a/board/zipitz2/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright (C) 2009
-# Marek Vasut <marek.vasut@gmail.com>
-#
-# Heavily based on pxa255_idp platform
-
-obj-y	:= zipitz2.o
diff --git a/board/zipitz2/zipitz2.c b/board/zipitz2/zipitz2.c
deleted file mode 100644
index 9208c882c2..0000000000
--- a/board/zipitz2/zipitz2.c
+++ /dev/null
@@ -1,219 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2009
- * Marek Vasut <marek.vasut@gmail.com>
- *
- * Heavily based on pxa255_idp platform
- */
-
-#include <common.h>
-#include <command.h>
-#include <serial.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa.h>
-#include <asm/arch/regs-mmc.h>
-#include <spi.h>
-#include <asm/io.h>
-#include <usb.h>
-#include <asm/mach-types.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef	CONFIG_CMD_SPI
-void lcd_start(void);
-#else
-inline void lcd_start(void) {};
-#endif
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-int board_init(void)
-{
-	/* arch number of Z2 */
-	gd->bd->bi_arch_number = MACH_TYPE_ZIPIT2;
-
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = 0xa0000100;
-
-	/* Enable LCD */
-	lcd_start();
-
-	return 0;
-}
-
-int dram_init(void)
-{
-	pxa2xx_dram_init();
-	gd->ram_size = PHYS_SDRAM_1_SIZE;
-	return 0;
-}
-
-#ifdef	CONFIG_CMD_USB
-int board_usb_init(int index, enum usb_init_type init)
-{
-	/* enable port 2 */
-	writel(readl(UP2OCR) | UP2OCR_HXOE | UP2OCR_HXS |
-		UP2OCR_DMPDE | UP2OCR_DPPDE, UP2OCR);
-
-	return 0;
-}
-
-int board_usb_cleanup(int index, enum usb_init_type init)
-{
-	return 0;
-}
-
-void usb_board_stop(void)
-{
-}
-#endif
-
-int dram_init_banksize(void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
-	return 0;
-}
-
-#ifdef	CONFIG_CMD_MMC
-int board_mmc_init(bd_t *bis)
-{
-	pxa_mmc_register(0);
-	return 0;
-}
-#endif
-
-#ifdef	CONFIG_CMD_SPI
-
-struct {
-	unsigned char	reg;
-	unsigned short	data;
-	unsigned char	mdelay;
-} lcd_data[] = {
-	{ 0x07,	0x0000,	0 },
-	{ 0x13,	0x0000,	10 },
-	{ 0x11,	0x3004,	0 },
-	{ 0x14,	0x200F,	0 },
-	{ 0x10,	0x1a20,	0 },
-	{ 0x13,	0x0040,	50 },
-	{ 0x13,	0x0060,	0 },
-	{ 0x13,	0x0070,	200 },
-	{ 0x01,	0x0127,	0 },
-	{ 0x02,	0x0700,	0 },
-	{ 0x03,	0x1030,	0 },
-	{ 0x08,	0x0208,	0 },
-	{ 0x0B,	0x0620,	0 },
-	{ 0x0C,	0x0110,	0 },
-	{ 0x30,	0x0120,	0 },
-	{ 0x31,	0x0127,	0 },
-	{ 0x32,	0x0000,	0 },
-	{ 0x33,	0x0503,	0 },
-	{ 0x34,	0x0727,	0 },
-	{ 0x35,	0x0124,	0 },
-	{ 0x36,	0x0706,	0 },
-	{ 0x37,	0x0701,	0 },
-	{ 0x38,	0x0F00,	0 },
-	{ 0x39,	0x0F00,	0 },
-	{ 0x40,	0x0000,	0 },
-	{ 0x41,	0x0000,	0 },
-	{ 0x42,	0x013f,	0 },
-	{ 0x43,	0x0000,	0 },
-	{ 0x44,	0x013f,	0 },
-	{ 0x45,	0x0000,	0 },
-	{ 0x46,	0xef00,	0 },
-	{ 0x47,	0x013f,	0 },
-	{ 0x48,	0x0000,	0 },
-	{ 0x07,	0x0015,	30 },
-	{ 0x07,	0x0017,	0 },
-	{ 0x20,	0x0000,	0 },
-	{ 0x21,	0x0000,	0 },
-	{ 0x22,	0x0000,	0 },
-};
-
-void zipitz2_spi_sda(int set)
-{
-	/* GPIO 13 */
-	if (set)
-		writel((1 << 13), GPSR0);
-	else
-		writel((1 << 13), GPCR0);
-}
-
-void zipitz2_spi_scl(int set)
-{
-	/* GPIO 22 */
-	if (set)
-		writel((1 << 22), GPCR0);
-	else
-		writel((1 << 22), GPSR0);
-}
-
-unsigned char zipitz2_spi_read(void)
-{
-	/* GPIO 40 */
-	return !!(readl(GPLR1) & (1 << 8));
-}
-
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-{
-	/* Always valid */
-	return 1;
-}
-
-void spi_cs_activate(struct spi_slave *slave)
-{
-	/* GPIO 88 low */
-	writel((1 << 24), GPCR2);
-}
-
-void spi_cs_deactivate(struct spi_slave *slave)
-{
-	/* GPIO 88 high */
-	writel((1 << 24), GPSR2);
-}
-
-void lcd_start(void)
-{
-	int i;
-	unsigned char reg[3] = { 0x74, 0x00, 0 };
-	unsigned char data[3] = { 0x76, 0, 0 };
-	unsigned char dummy[3] = { 0, 0, 0 };
-
-	/* PWM2 AF */
-	writel(readl(GAFR0_L) | 0x00800000, GAFR0_L);
-	/* Enable clock to all PWM */
-	writel(readl(CKEN) | 0x3, CKEN);
-	/* Configure PWM2 */
-	writel(0x4f, PWM_CTRL2);
-	writel(0x2ff, PWM_PWDUTY2);
-	writel(792, PWM_PERVAL2);
-
-	/* Toggle the reset pin to reset the LCD */
-	writel((1 << 19), GPSR0);
-	udelay(100000);
-	writel((1 << 19), GPCR0);
-	udelay(20000);
-	writel((1 << 19), GPSR0);
-	udelay(20000);
-
-	/* Program the LCD init sequence */
-	for (i = 0; i < sizeof(lcd_data) / sizeof(lcd_data[0]); i++) {
-		reg[0] = 0x74;
-		reg[1] = 0x0;
-		reg[2] = lcd_data[i].reg;
-		spi_xfer(NULL, 24, reg, dummy, SPI_XFER_BEGIN | SPI_XFER_END);
-
-		data[0] = 0x76;
-		data[1] = lcd_data[i].data >> 8;
-		data[2] = lcd_data[i].data & 0xff;
-		spi_xfer(NULL, 24, data, dummy, SPI_XFER_BEGIN | SPI_XFER_END);
-
-		if (lcd_data[i].mdelay)
-			udelay(lcd_data[i].mdelay * 1000);
-	}
-
-	writel((1 << 11), GPSR0);
-}
-#endif