diff options
| author | Peng Fan <peng.fan@nxp.com> | 2017-12-29 14:20:15 +0800 |
|---|---|---|
| committer | Peng Fan <peng.fan@nxp.com> | 2017-12-29 15:17:35 +0800 |
| commit | 81223f7c281ba19a8acabc28cf2cd405bbb75365 (patch) | |
| tree | 2e5bd5e2002b568aa2d7ee00e710eccc9a7636df /board | |
| parent | 13a9fa8e8f215ed6aee1fde0e9f8eaaf9455a194 (diff) | |
MLK-17303-2 imx: 8qm: Fix ENET1 build
Fix ENET1 build and enablement.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit b799894c4e56a4afee0d7c8041bd49d718d0bd35)
Diffstat (limited to 'board')
| -rw-r--r-- | board/freescale/imx8qm_mek/imx8qm_mek.c | 18 |
1 files changed, 0 insertions, 18 deletions
diff --git a/board/freescale/imx8qm_mek/imx8qm_mek.c b/board/freescale/imx8qm_mek/imx8qm_mek.c index a51827b5877..1d5648b2a3c 100644 --- a/board/freescale/imx8qm_mek/imx8qm_mek.c +++ b/board/freescale/imx8qm_mek/imx8qm_mek.c @@ -163,24 +163,6 @@ int board_eth_init(bd_t *bis) int board_phy_config(struct phy_device *phydev) { -#ifdef CONFIG_FEC_ENABLE_MAX7322 - uint8_t value; - - /* This is needed to drive the pads to 1.8V instead of 1.5V */ - i2c_set_bus_num(CONFIG_MAX7322_I2C_BUS); - - if (!i2c_probe(CONFIG_MAX7322_I2C_ADDR)) { - /* Write 0x1 to enable O0 output, this device has no addr */ - /* hence addr length is 0 */ - value = 0x1; - if (i2c_write(CONFIG_MAX7322_I2C_ADDR, 0, 0, &value, 1)) - printf("MAX7322 write failed\n"); - } else { - printf("MAX7322 Not found\n"); - } - mdelay(1); -#endif - phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x1f); phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x8); |