diff options
| author | Peng Fan <peng.fan@nxp.com> | 2018-11-20 10:20:00 +0000 |
|---|---|---|
| committer | Stefano Babic <sbabic@denx.de> | 2019-01-01 14:12:18 +0100 |
| commit | 86ac7a9a5d0c8ae9f0e5e6ef2cc189198e498cf4 (patch) | |
| tree | 151e158f523faa632ac6083d66311b2c09de7077 /configs/imx8mq_evk_defconfig | |
| parent | e3963c0943042afcb38d99041a8dc3d55f092f5f (diff) | |
imx: add i.MX8MQ EVK support
Add i.MX8MQ EVK support. SPL will initialize ddr and load ddr phy
firmware. Then loading FIT image, ATF to OCRAM, U-Boot and DTB to
DRAM.
The boot log with Arm trusted firmware console enabled:
"
U-Boot SPL 2018.11-00142-g9ae14e7274 (Nov 20 2018 - 18:13:16 +0800)
PMIC: PFUZE100 ID=0x10
Normal Boot
Trying to boot from MMC2
NOTICE: Configureing TZASC380
NOTICE: BL31: v1.5(release):p9.0.0_1.0.0-beta-20180928-8-ge09c4b62-dirty
NOTICE: BL31: Built : 09:28:54, Nov 8 2018
lpddr4 swffc start
NOTICE: sip svc init
U-Boot 2018.11-00142-g9ae14e7274 (Nov 20 2018 - 18:13:16 +0800)
CPU: Freescale i.MX8MQ rev2.0 at 1000 MHz
Reset cause: POR
Model: Freescale i.MX8MQ EVK
DRAM: 3 GiB
MMC: FSL_SDHC: 0, FSL_SDHC: 1
In: serial
Out: serial
Err: serial
Net:
Warning: ethernet@30be0000 using MAC address from ROM
eth0: ethernet@30be0000
Hit any key to stop autoboot: 0
"
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Diffstat (limited to 'configs/imx8mq_evk_defconfig')
| -rw-r--r-- | configs/imx8mq_evk_defconfig | 37 |
1 files changed, 37 insertions, 0 deletions
diff --git a/configs/imx8mq_evk_defconfig b/configs/imx8mq_evk_defconfig new file mode 100644 index 0000000000..f216d46a8f --- /dev/null +++ b/configs/imx8mq_evk_defconfig @@ -0,0 +1,37 @@ +CONFIG_ARM=y +CONFIG_ARCH_IMX8M=y +CONFIG_SYS_TEXT_BASE=0x40200000 +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_TARGET_IMX8MQ_EVK=y +CONFIG_SAVED_DRAM_TIMING_BASE=0x40000000 +CONFIG_DEFAULT_DEVICE_TREE="fsl-imx8mq-evk" +CONFIG_OF_LIST="fsl-imx8mq-evk" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/imx8m/imximage.cfg" +CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh" +CONFIG_FIT=y +CONFIG_SPL_LOAD_FIT=y +#CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg" +CONFIG_SPL=y +CONFIG_SPL_BOARD_INIT=y +CONFIG_HUSH_PARSER=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_REGULATOR=y +CONFIG_OF_CONTROL=y +CONFIG_DM_GPIO=y +CONFIG_DM_I2C=y +CONFIG_DM_MMC=y +CONFIG_DM_ETH=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_IMX8M=y +CONFIG_SYS_I2C_MXC=y +CONFIG_DM_PMIC_PFUZE100=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_PFUZE100=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y +CONFIG_DM_THERMAL=y +CONFIG_FS_FAT=y +CONFIG_FIT_EXTERNAL_OFFSET=0x3000 |