Patch by Steven Scholz, 16 Aug 2004:

- Introducing the concept of SoCs "./cpu/$(CPU)/$(SOC)"
- creating subdirs for SoCs ./cpu/arm920t/imx and ./cpu/arm920t/s3c24x0
- moving SoC specific code out of cpu/arm920t/ into cpu/arm920t/$(SOC)/
- moving drivers/s3c24x0_i2c.c and drivers/serial_imx.c out of drivers/
  into cpu/arm920t/$(SOC)/

13 files changed, 734 insertions, 5 deletions

diff --git a/cpu/arm920t/Makefile b/cpu/arm920t/Makefile
index 68a33d6559..8f256e9022 100644
--- a/cpu/arm920t/Makefile
+++ b/cpu/arm920t/Makefile
@@ -26,11 +26,7 @@ include $(TOPDIR)/config.mk
 LIB	= lib$(CPU).a
 
 START	= start.o
-OBJS	= cpu.o	\
-	  imx_generic.o imx_interrupts.o imx_speed.o \
-	  interrupts.o \
-	  s3c24x0_interrupts.o s3c24x0_serial.o s3c24x0_speed.o \
-	  usb_ohci.o
+OBJS	= cpu.o interrupts.o
 
 all:	.depend $(START) $(LIB)
 
diff --git a/cpu/arm920t/imx/Makefile b/cpu/arm920t/imx/Makefile
new file mode 100644
index 0000000000..8865f827d4
--- /dev/null
+++ b/cpu/arm920t/imx/Makefile
@@ -0,0 +1,42 @@
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(SOC).a
+
+OBJS	= generic.o interrupts.o serial.o speed.o
+
+all:	.depend $(LIB)
+
+$(LIB):	$(OBJS)
+	$(AR) crv $@ $(OBJS)
+
+#########################################################################
+
+.depend:	Makefile $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/cpu/arm920t/imx_generic.c b/cpu/arm920t/imx/generic.c
index aa7c8c159d..aa7c8c159d 100644
--- a/cpu/arm920t/imx_generic.c
+++ b/cpu/arm920t/imx/generic.c
diff --git a/cpu/arm920t/imx_interrupts.c b/cpu/arm920t/imx/interrupts.c
index 12ae2faf28..12ae2faf28 100644
--- a/cpu/arm920t/imx_interrupts.c
+++ b/cpu/arm920t/imx/interrupts.c
diff --git a/cpu/arm920t/imx/serial.c b/cpu/arm920t/imx/serial.c
new file mode 100644
index 0000000000..9dbaa569a0
--- /dev/null
+++ b/cpu/arm920t/imx/serial.c
@@ -0,0 +1,201 @@
+/*
+ * (c) 2004 Sascha Hauer <sascha@saschahauer.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <common.h>
+#if defined (CONFIG_IMX)
+
+#include <asm/arch/imx-regs.h>
+
+#ifndef CONFIG_IMX_SERIAL_NONE
+
+#if defined CONFIG_IMX_SERIAL1
+#define UART_BASE IMX_UART1_BASE
+#elif defined CONFIG_IMX_SERIAL2
+#define UART_BASE IMX_UART2_BASE
+#else
+#error "define CONFIG_IMX_SERIAL1, CONFIG_IMX_SERIAL2 or CONFIG_IMX_SERIAL_NONE"
+#endif
+
+struct imx_serial {
+	volatile uint32_t urxd[16];
+	volatile uint32_t utxd[16];
+	volatile uint32_t ucr1;
+	volatile uint32_t ucr2;
+	volatile uint32_t ucr3;
+	volatile uint32_t ucr4;
+	volatile uint32_t ufcr;
+	volatile uint32_t usr1;
+	volatile uint32_t usr2;
+	volatile uint32_t uesc;
+	volatile uint32_t utim;
+	volatile uint32_t ubir;
+	volatile uint32_t ubmr;
+	volatile uint32_t ubrc;
+	volatile uint32_t bipr[4];
+	volatile uint32_t bmpr[4];
+	volatile uint32_t uts;
+};
+
+void serial_setbrg (void)
+{
+	serial_init();
+}
+
+extern void imx_gpio_mode(int gpio_mode);
+
+/*
+ * Initialise the serial port with the given baudrate. The settings
+ * are always 8 data bits, no parity, 1 stop bit, no start bits.
+ *
+ */
+int serial_init (void)
+{
+	volatile struct imx_serial* base = (struct imx_serial *)UART_BASE;
+#ifdef CONFIG_IMX_SERIAL1
+	imx_gpio_mode(PC11_PF_UART1_TXD);
+	imx_gpio_mode(PC12_PF_UART1_RXD);
+#else
+	imx_gpio_mode(PB30_PF_UART2_TXD);
+	imx_gpio_mode(PB31_PF_UART2_RXD);
+#endif
+
+	/* Disable UART */
+	base->ucr1 &= ~UCR1_UARTEN;
+
+	/* Set to default POR state */
+
+	base->ucr1 = 0x00000004;
+	base->ucr2 = 0x00000000;
+	base->ucr3 = 0x00000000;
+	base->ucr4 = 0x00008040;
+	base->uesc = 0x0000002B;
+	base->utim = 0x00000000;
+	base->ubir = 0x00000000;
+	base->ubmr = 0x00000000;
+	base->uts  = 0x00000000;
+	/* Set clocks */
+	base->ucr4 |= UCR4_REF16;
+
+	/* Configure FIFOs */
+	base->ufcr = 0xa81;
+
+	/* Set the numerator value minus one of the BRM ratio */
+	base->ubir = (CONFIG_BAUDRATE / 100) - 1;
+
+	/* Set the denominator value minus one of the BRM ratio	*/
+	base->ubmr = 10000 - 1;
+
+	/* Set to 8N1 */
+	base->ucr2 &= ~UCR2_PREN;
+	base->ucr2 |= UCR2_WS;
+	base->ucr2 &= ~UCR2_STPB;
+
+	/* Ignore RTS */
+	base->ucr2 |= UCR2_IRTS;
+
+	/* Enable UART */
+	base->ucr1 |= UCR1_UARTEN | UCR1_UARTCLKEN;
+
+	/* Enable FIFOs */
+	base->ucr2 |= UCR2_SRST | UCR2_RXEN | UCR2_TXEN;
+
+  	/* Clear status flags */
+	base->usr2 |= USR2_ADET  |
+	          USR2_DTRF  |
+	          USR2_IDLE  |
+	          USR2_IRINT |
+	          USR2_WAKE  |
+	          USR2_RTSF  |
+	          USR2_BRCD  |
+	          USR2_ORE   |
+	          USR2_RDR;
+
+  	/* Clear status flags */
+	base->usr1 |= USR1_PARITYERR |
+	          USR1_RTSD      |
+	          USR1_ESCF      |
+	          USR1_FRAMERR   |
+	          USR1_AIRINT    |
+	          USR1_AWAKE;
+	return (0);
+}
+
+/*
+ * Read a single byte from the serial port. Returns 1 on success, 0
+ * otherwise. When the function is successful, the character read is
+ * written into its argument c.
+ */
+int serial_getc (void)
+{
+	volatile struct imx_serial* base = (struct imx_serial *)UART_BASE;
+	unsigned char ch;
+
+	while(base->uts & UTS_RXEMPTY);
+
+	ch = (char)base->urxd[0];
+
+	return ch;
+}
+
+#ifdef CONFIG_HWFLOW
+static int hwflow = 0; /* turned off by default */
+int hwflow_onoff(int on)
+{
+}
+#endif
+
+/*
+ * Output a single byte to the serial port.
+ */
+void serial_putc (const char c)
+{
+	volatile struct imx_serial* base = (struct imx_serial *)UART_BASE;
+
+	/* Wait for Tx FIFO not full */
+	while (base->uts & UTS_TXFULL);
+
+	base->utxd[0] = c;
+
+	/* If \n, also do \r */
+	if (c == '\n')
+		serial_putc ('\r');
+}
+
+/*
+ * Test whether a character is in the RX buffer
+ */
+int serial_tstc (void)
+{
+	volatile struct imx_serial* base = (struct imx_serial *)UART_BASE;
+
+	/* If receive fifo is empty, return false */
+	if (base->uts & UTS_RXEMPTY)
+		return 0;
+	return 1;
+}
+
+void
+serial_puts (const char *s)
+{
+	while (*s) {
+		serial_putc (*s++);
+	}
+}
+#endif /* CONFIG_IMX_SERIAL_NONE */
+#endif /* defined CONFIG_IMX */
diff --git a/cpu/arm920t/imx_speed.c b/cpu/arm920t/imx/speed.c
index 1e296987d6..1e296987d6 100644
--- a/cpu/arm920t/imx_speed.c
+++ b/cpu/arm920t/imx/speed.c
diff --git a/cpu/arm920t/s3c24x0/Makefile b/cpu/arm920t/s3c24x0/Makefile
new file mode 100644
index 0000000000..af9e4effce
--- /dev/null
+++ b/cpu/arm920t/s3c24x0/Makefile
@@ -0,0 +1,43 @@
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(SOC).a
+
+OBJS	= i2c.o interrupts.o serial.o speed.o \
+	  usb_ohci.o
+
+all:	.depend $(LIB)
+
+$(LIB):	$(OBJS)
+	$(AR) crv $@ $(OBJS)
+
+#########################################################################
+
+.depend:	Makefile $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/cpu/arm920t/s3c24x0/i2c.c b/cpu/arm920t/s3c24x0/i2c.c
new file mode 100644
index 0000000000..ef56cd1c31
--- /dev/null
+++ b/cpu/arm920t/s3c24x0/i2c.c
@@ -0,0 +1,447 @@
+/*
+ * (C) Copyright 2002
+ * David Mueller, ELSOFT AG, d.mueller@elsoft.ch
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* This code should work for both the S3C2400 and the S3C2410
+ * as they seem to have the same I2C controller inside.
+ * The different address mapping is handled by the s3c24xx.h files below.
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_DRIVER_S3C24X0_I2C
+
+#if defined(CONFIG_S3C2400)
+#include <s3c2400.h>
+#elif defined(CONFIG_S3C2410)
+#include <s3c2410.h>
+#endif
+#include <i2c.h>
+
+#ifdef CONFIG_HARD_I2C
+
+#define	I2C_WRITE	0
+#define I2C_READ	1
+
+#define I2C_OK		0
+#define I2C_NOK		1
+#define I2C_NACK	2
+#define I2C_NOK_LA	3		/* Lost arbitration */
+#define I2C_NOK_TOUT	4		/* time out */
+
+#define I2CSTAT_BSY	0x20		/* Busy bit */
+#define I2CSTAT_NACK	0x01		/* Nack bit */
+#define I2CCON_IRPND	0x10		/* Interrupt pending bit */
+#define I2C_MODE_MT	0xC0		/* Master Transmit Mode */
+#define I2C_MODE_MR	0x80		/* Master Receive Mode */
+#define I2C_START_STOP	0x20		/* START / STOP */
+#define I2C_TXRX_ENA	0x10		/* I2C Tx/Rx enable */
+
+#define I2C_TIMEOUT 1			/* 1 second */
+
+
+static int GetI2CSDA(void)
+{
+	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+
+#ifdef CONFIG_S3C2410
+	return (gpio->GPEDAT & 0x8000) >> 15;
+#endif
+#ifdef CONFIG_S3C2400
+	return (gpio->PGDAT & 0x0020) >> 5;
+#endif
+}
+
+#if 0
+static void SetI2CSDA(int x)
+{
+	rGPEDAT = (rGPEDAT & ~0x8000) | (x&1) << 15;
+}
+#endif
+
+static void SetI2CSCL(int x)
+{
+	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+
+#ifdef CONFIG_S3C2410
+	gpio->GPEDAT = (gpio->GPEDAT & ~0x4000) | (x&1) << 14;
+#endif
+#ifdef CONFIG_S3C2400
+	gpio->PGDAT = (gpio->PGDAT & ~0x0040) | (x&1) << 6;
+#endif
+}
+
+
+static int WaitForXfer (void)
+{
+	S3C24X0_I2C *const i2c = S3C24X0_GetBase_I2C ();
+	int i, status;
+
+	i = I2C_TIMEOUT * 10000;
+	status = i2c->IICCON;
+	while ((i > 0) && !(status & I2CCON_IRPND)) {
+		udelay (100);
+		status = i2c->IICCON;
+		i--;
+	}
+
+	return (status & I2CCON_IRPND) ? I2C_OK : I2C_NOK_TOUT;
+}
+
+static int IsACK (void)
+{
+	S3C24X0_I2C *const i2c = S3C24X0_GetBase_I2C ();
+
+	return (!(i2c->IICSTAT & I2CSTAT_NACK));
+}
+
+static void ReadWriteByte (void)
+{
+	S3C24X0_I2C *const i2c = S3C24X0_GetBase_I2C ();
+
+	i2c->IICCON &= ~I2CCON_IRPND;
+}
+
+void i2c_init (int speed, int slaveadd)
+{
+	S3C24X0_I2C *const i2c = S3C24X0_GetBase_I2C ();
+	S3C24X0_GPIO *const gpio = S3C24X0_GetBase_GPIO ();
+	ulong freq, pres = 16, div;
+	int i, status;
+
+	/* wait for some time to give previous transfer a chance to finish */
+
+	i = I2C_TIMEOUT * 1000;
+	status = i2c->IICSTAT;
+	while ((i > 0) && (status & I2CSTAT_BSY)) {
+		udelay (1000);
+		status = i2c->IICSTAT;
+		i--;
+	}
+
+	if ((status & I2CSTAT_BSY) || GetI2CSDA () == 0) {
+#ifdef CONFIG_S3C2410
+		ulong old_gpecon = gpio->GPECON;
+#endif
+#ifdef CONFIG_S3C2400
+		ulong old_gpecon = gpio->PGCON;
+#endif
+		/* bus still busy probably by (most) previously interrupted transfer */
+
+#ifdef CONFIG_S3C2410
+		/* set I2CSDA and I2CSCL (GPE15, GPE14) to GPIO */
+		gpio->GPECON = (gpio->GPECON & ~0xF0000000) | 0x10000000;
+#endif
+#ifdef CONFIG_S3C2400
+		/* set I2CSDA and I2CSCL (PG5, PG6) to GPIO */
+		gpio->PGCON = (gpio->PGCON & ~0x00003c00) | 0x00000c00;
+#endif
+
+		/* toggle I2CSCL until bus idle */
+		SetI2CSCL (0);
+		udelay (1000);
+		i = 10;
+		while ((i > 0) && (GetI2CSDA () != 1)) {
+			SetI2CSCL (1);
+			udelay (1000);
+			SetI2CSCL (0);
+			udelay (1000);
+			i--;
+		}
+		SetI2CSCL (1);
+		udelay (1000);
+
+		/* restore pin functions */
+#ifdef CONFIG_S3C2410
+		gpio->GPECON = old_gpecon;
+#endif
+#ifdef CONFIG_S3C2400
+		gpio->PGCON = old_gpecon;
+#endif
+	}
+
+	/* calculate prescaler and divisor values */
+	freq = get_PCLK ();
+	if ((freq / pres / (16 + 1)) > speed)
+		/* set prescaler to 512 */
+		pres = 512;
+
+	div = 0;
+	while ((freq / pres / (div + 1)) > speed)
+		div++;
+
+	/* set prescaler, divisor according to freq, also set
+	 * ACKGEN, IRQ */
+	i2c->IICCON = (div & 0x0F) | 0xA0 | ((pres == 512) ? 0x40 : 0);
+
+	/* init to SLAVE REVEIVE and set slaveaddr */
+	i2c->IICSTAT = 0;
+	i2c->IICADD = slaveadd;
+	/* program Master Transmit (and implicit STOP) */
+	i2c->IICSTAT = I2C_MODE_MT | I2C_TXRX_ENA;
+
+}
+
+/*
+ * cmd_type is 0 for write, 1 for read.
+ *
+ * addr_len can take any value from 0-255, it is only limited
+ * by the char, we could make it larger if needed. If it is
+ * 0 we skip the address write cycle.
+ */
+static
+int i2c_transfer (unsigned char cmd_type,
+		  unsigned char chip,
+		  unsigned char addr[],
+		  unsigned char addr_len,
+		  unsigned char data[], unsigned short data_len)
+{
+	S3C24X0_I2C *const i2c = S3C24X0_GetBase_I2C ();
+	int i, status, result;
+
+	if (data == 0 || data_len == 0) {
+		/*Don't support data transfer of no length or to address 0 */
+		printf ("i2c_transfer: bad call\n");
+		return I2C_NOK;
+	}
+
+	/* Check I2C bus idle */
+	i = I2C_TIMEOUT * 1000;
+	status = i2c->IICSTAT;
+	while ((i > 0) && (status & I2CSTAT_BSY)) {
+		udelay (1000);
+		status = i2c->IICSTAT;
+		i--;
+	}
+
+	if (status & I2CSTAT_BSY)
+		return I2C_NOK_TOUT;
+
+	i2c->IICCON |= 0x80;
+	result = I2C_OK;
+
+	switch (cmd_type) {
+	case I2C_WRITE:
+		if (addr && addr_len) {
+			i2c->IICDS = chip;
+			/* send START */
+			i2c->IICSTAT = I2C_MODE_MT | I2C_TXRX_ENA | I2C_START_STOP;
+			i = 0;
+			while ((i < addr_len) && (result == I2C_OK)) {
+				result = WaitForXfer ();
+				i2c->IICDS = addr[i];
+				ReadWriteByte ();
+				i++;
+			}
+			i = 0;
+			while ((i < data_len) && (result == I2C_OK)) {
+				result = WaitForXfer ();
+				i2c->IICDS = data[i];
+				ReadWriteByte ();
+				i++;
+			}
+		} else {
+			i2c->IICDS = chip;
+			/* send START */
+			i2c->IICSTAT = I2C_MODE_MT | I2C_TXRX_ENA | I2C_START_STOP;
+			i = 0;
+			while ((i < data_len) && (result = I2C_OK)) {
+				result = WaitForXfer ();
+				i2c->IICDS = data[i];
+				ReadWriteByte ();
+				i++;
+			}
+		}
+
+		if (result == I2C_OK)
+			result = WaitForXfer ();
+
+		/* send STOP */
+		i2c->IICSTAT = I2C_MODE_MR | I2C_TXRX_ENA;
+		ReadWriteByte ();
+		break;
+
+	case I2C_READ:
+		if (addr && addr_len) {
+			i2c->IICSTAT = I2C_MODE_MT | I2C_TXRX_ENA;
+			i2c->IICDS = chip;
+			/* send START */
+			i2c->IICSTAT |= I2C_START_STOP;
+			result = WaitForXfer ();
+			if (IsACK ()) {
+				i = 0;
+				while ((i < addr_len) && (result == I2C_OK)) {
+					i2c->IICDS = addr[i];
+					ReadWriteByte ();
+					result = WaitForXfer ();
+					i++;
+				}
+
+				i2c->IICDS = chip;
+				/* resend START */
+				i2c->IICSTAT =  I2C_MODE_MR | I2C_TXRX_ENA |
+						I2C_START_STOP;
+				ReadWriteByte ();
+				result = WaitForXfer ();
+				i = 0;
+				while ((i < data_len) && (result == I2C_OK)) {
+					/* disable ACK for final READ */
+					if (i == data_len - 1)
+						i2c->IICCON &= ~0x80;
+					ReadWriteByte ();
+					result = WaitForXfer ();
+					data[i] = i2c->IICDS;
+					i++;
+				}
+			} else {
+				result = I2C_NACK;
+			}
+
+		} else {
+			i2c->IICSTAT = I2C_MODE_MR | I2C_TXRX_ENA;
+			i2c->IICDS = chip;
+			/* send START */
+			i2c->IICSTAT |= I2C_START_STOP;
+			result = WaitForXfer ();
+
+			if (IsACK ()) {
+				i = 0;
+				while ((i < data_len) && (result == I2C_OK)) {
+					/* disable ACK for final READ */
+					if (i == data_len - 1)
+						i2c->IICCON &= ~0x80;
+					ReadWriteByte ();
+					result = WaitForXfer ();
+					data[i] = i2c->IICDS;
+					i++;
+				}
+			} else {
+				result = I2C_NACK;
+			}
+		}
+
+		/* send STOP */
+		i2c->IICSTAT = I2C_MODE_MR | I2C_TXRX_ENA;
+		ReadWriteByte ();
+		break;
+
+	default:
+		printf ("i2c_transfer: bad call\n");
+		result = I2C_NOK;
+		break;
+	}
+
+	return (result);
+}
+
+int i2c_probe (uchar chip)
+{
+	uchar buf[1];
+
+	buf[0] = 0;
+
+	/*
+	 * What is needed is to send the chip address and verify that the
+	 * address was <ACK>ed (i.e. there was a chip at that address which
+	 * drove the data line low).
+	 */
+	return (i2c_transfer (I2C_READ, chip << 1, 0, 0, buf, 1) != I2C_OK);
+}
+
+int i2c_read (uchar chip, uint addr, int alen, uchar * buffer, int len)
+{
+	uchar xaddr[4];
+	int ret;
+
+	if (alen > 4) {
+		printf ("I2C read: addr len %d not supported\n", alen);
+		return 1;
+	}
+
+	if (alen > 0) {
+		xaddr[0] = (addr >> 24) & 0xFF;
+		xaddr[1] = (addr >> 16) & 0xFF;
+		xaddr[2] = (addr >> 8) & 0xFF;
+		xaddr[3] = addr & 0xFF;
+	}
+
+#ifdef CFG_I2C_EEPROM_ADDR_OVERFLOW
+	/*
+	 * EEPROM chips that implement "address overflow" are ones
+	 * like Catalyst 24WC04/08/16 which has 9/10/11 bits of
+	 * address and the extra bits end up in the "chip address"
+	 * bit slots. This makes a 24WC08 (1Kbyte) chip look like
+	 * four 256 byte chips.
+	 *
+	 * Note that we consider the length of the address field to
+	 * still be one byte because the extra address bits are
+	 * hidden in the chip address.
+	 */
+	if (alen > 0)
+		chip |= ((addr >> (alen * 8)) & CFG_I2C_EEPROM_ADDR_OVERFLOW);
+#endif
+	if ((ret =
+	     i2c_transfer (I2C_READ, chip << 1, &xaddr[4 - alen], alen,
+			   buffer, len)) != 0) {
+		printf ("I2c read: failed %d\n", ret);
+		return 1;
+	}
+	return 0;
+}
+
+int i2c_write (uchar chip, uint addr, int alen, uchar * buffer, int len)
+{
+	uchar xaddr[4];
+
+	if (alen > 4) {
+		printf ("I2C write: addr len %d not supported\n", alen);
+		return 1;
+	}
+
+	if (alen > 0) {
+		xaddr[0] = (addr >> 24) & 0xFF;
+		xaddr[1] = (addr >> 16) & 0xFF;
+		xaddr[2] = (addr >> 8) & 0xFF;
+		xaddr[3] = addr & 0xFF;
+	}
+#ifdef CFG_I2C_EEPROM_ADDR_OVERFLOW
+	/*
+	 * EEPROM chips that implement "address overflow" are ones
+	 * like Catalyst 24WC04/08/16 which has 9/10/11 bits of
+	 * address and the extra bits end up in the "chip address"
+	 * bit slots. This makes a 24WC08 (1Kbyte) chip look like
+	 * four 256 byte chips.
+	 *
+	 * Note that we consider the length of the address field to
+	 * still be one byte because the extra address bits are
+	 * hidden in the chip address.
+	 */
+	if (alen > 0)
+		chip |= ((addr >> (alen * 8)) & CFG_I2C_EEPROM_ADDR_OVERFLOW);
+#endif
+	return (i2c_transfer
+		(I2C_WRITE, chip << 1, &xaddr[4 - alen], alen, buffer,
+		 len) != 0);
+}
+#endif	/* CONFIG_HARD_I2C */
+
+#endif /* CONFIG_DRIVER_S3C24X0_I2C */
diff --git a/cpu/arm920t/s3c24x0_interrupts.c b/cpu/arm920t/s3c24x0/interrupts.c
index 92298b09f0..92298b09f0 100644
--- a/cpu/arm920t/s3c24x0_interrupts.c
+++ b/cpu/arm920t/s3c24x0/interrupts.c
diff --git a/cpu/arm920t/s3c24x0_serial.c b/cpu/arm920t/s3c24x0/serial.c
index 83274432e4..83274432e4 100644
--- a/cpu/arm920t/s3c24x0_serial.c
+++ b/cpu/arm920t/s3c24x0/serial.c
diff --git a/cpu/arm920t/s3c24x0_speed.c b/cpu/arm920t/s3c24x0/speed.c
index e0dca62563..e0dca62563 100644
--- a/cpu/arm920t/s3c24x0_speed.c
+++ b/cpu/arm920t/s3c24x0/speed.c
diff --git a/cpu/arm920t/usb_ohci.c b/cpu/arm920t/s3c24x0/usb_ohci.c
index 6f4a9f7ae9..6f4a9f7ae9 100644
--- a/cpu/arm920t/usb_ohci.c
+++ b/cpu/arm920t/s3c24x0/usb_ohci.c
diff --git a/cpu/arm920t/usb_ohci.h b/cpu/arm920t/s3c24x0/usb_ohci.h
index fab0e65a38..fab0e65a38 100644
--- a/cpu/arm920t/usb_ohci.h
+++ b/cpu/arm920t/s3c24x0/usb_ohci.h