ENGR00218972 MX6 Secure Boot, Change to dynamic HAB data authentication

The original secure boot implementation make a consumption that
u-boot.bin will not exceed 0x2F000. With this consumption, the hab data
is hard coded in linker script file to relative address 0x2F000 without
causing any problem.

But when this consumption don't hold, the hard coded way will cause
memory region overlap and break build. So we need to change to a dynamic
way of allocating hab_data. The new implementation put hab data at the
next 0x1000 alignment after u-boot data and text section, instead of
hard coded to 0x2F000.

Similar changes is made to uImage authentication implementation.

Changes in U-Boot includes:
    - in u-boot.lds file, change "__hab_data" to dynamic align to 0x1000
    - change authenticate_image implementation, originally the uImage
      parameters are hard coded, now they are retrived from the
      "load_addr" and the image_hdr

The new secure image layout:

U-Boot
    +-------------------+      DDR_START
    |                   |
    |    U-Boot Image   |
    |                   |
    +-------------------+      DDR_START + UBOOT_SIZE
    |    PADDING        |
    +-------------------+      align to 0x1000
    |    CSF Data       | -
    +-------------------+  +-- CSF + Pad,  Size : 0x2000
    |    PADDING        | -
    +-------------------+

uImage

    +-------------------+      DDR_START
    |                   |
    |     uImage        |
    |                   |
    +-------------------+      DDR_START + UIMAGE_SIZE
    |     PADDING       |
    +-------------------+      align to 0x1000
    |     IVT           | ---- Size : 0x20
    +-------------------+
    |     CSF Data      | -
    +-------------------+  +-- CSF + Pad,  Size : 0x2000
    |     PADDING       | -
    +-------------------+

Signed-off-by: Eric Sun <jian.sun@freescale.com>

1 files changed, 18 insertions, 18 deletions

diff --git a/cpu/arm_cortexa8/mx6/generic.c b/cpu/arm_cortexa8/mx6/generic.c
index 55e6b78513..f0a9ce2aff 100644
--- a/cpu/arm_cortexa8/mx6/generic.c
+++ b/cpu/arm_cortexa8/mx6/generic.c
@@ -1222,6 +1222,11 @@ U_BOOT_CMD(
 #define hab_rvt_exit ((hab_rvt_exit_t *) HAB_RVT_EXIT)
 #define hab_rvt_clock_init HAB_RVT_CLOCK_INIT
 
+#define OCOTP_CFG5_OFFSET	0x460
+#define IVT_SIZE		0x20
+#define ALIGN_SIZE		0x1000
+#define CSF_PAD_SIZE		0x2000
+
 /*
  * +------------+  0x0 (DDR_UIMAGE_START) -
  * |   Header   |                          |
@@ -1240,9 +1245,9 @@ U_BOOT_CMD(
  * |            |                          |                                |
  * | Fill Data  |                          |                                |
  * |            |                          |                                |
- * +------------+ 0x003F_DFE0              |                                |
+ * +------------+ Align to ALIGN_SIZE      |                                |
  * |    IVT     |                          |                                |
- * +------------+ 0x003F_E000             -                                 |
+ * +------------+ + IVT_SIZE              -                                 |
  * |            |                                                           |
  * |  CSF DATA  | <---------------------------------------------------------+
  * |            |
@@ -1250,19 +1255,9 @@ U_BOOT_CMD(
  * |            |
  * | Fill Data  |
  * |            |
- * +------------+ 0x0040_0000
+ * +------------+ + CSF_PAD_SIZE
  */
 
-#ifndef CONFIG_MX6SL
-#define DDR_UIMAGE_START	0x10800000
-#else
-#define DDR_UIMAGE_START	0x80800000
-#endif
-
-#define DDR_UIMAGE_LENGTH	0x400000
-#define DDR_IVT_OFFSET		0x3FDFE0
-#define OCOTP_CFG5_OFFSET	0x460
-
 int check_hab_enable(void)
 {
 	u32 reg = 0;
@@ -1344,23 +1339,28 @@ void hab_caam_clock_disable(void)
 	writel(reg, CCM_BASE_ADDR + CLKCTL_CCGR0);
 }
 
-uint32_t authenticate_image(void)
+uint32_t authenticate_image(uint32_t ddr_start, uint32_t image_size)
 {
 	uint32_t load_addr = 0;
 	size_t bytes;
-	ptrdiff_t ivt_offset = DDR_IVT_OFFSET;
+	ptrdiff_t ivt_offset = 0;
 	int result = 0;
 	ulong start;
 
 	if (check_hab_enable() == 1) {
 		printf("\nAuthenticate uImage from DDR location 0x%lx...\n",
-			DDR_UIMAGE_START);
+			ddr_start);
 
 		hab_caam_clock_enable();
 
 		if (hab_rvt_entry() == HAB_SUCCESS) {
-			start = DDR_UIMAGE_START;
-			bytes = DDR_UIMAGE_LENGTH;
+			/*Align to ALIGN_SIZE*/
+			ivt_offset = image_size - image_size % ALIGN_SIZE
+				+ ALIGN_SIZE;
+
+			start = ddr_start;
+			bytes = ivt_offset + IVT_SIZE + CSF_PAD_SIZE;
+
 			load_addr = (uint32_t)hab_rvt_authenticate_image(
 					HAB_CID_UBOOT,
 					ivt_offset, (void **)&start,