OMAP3517PRE-ALPHA: DDR size issue fixed.

U-Boot was printing DDR size as 0, as of now hard-coded it with
macro (defined in include/configs/omap3517evm.h).

TODO:
	- Ideally it should calculate the size baded on EMIF configuration
	  made by primary bootloader (x-loader).

3 files changed, 24 insertions, 11 deletions

diff --git a/cpu/arm_cortexa8/omap3/board.c b/cpu/arm_cortexa8/omap3/board.c
index 15834fd19b..ea94e59664 100644
--- a/cpu/arm_cortexa8/omap3/board.c
+++ b/cpu/arm_cortexa8/omap3/board.c
@@ -275,33 +275,24 @@ void watchdog_init(void)
 int dram_init(void)
 {
 	DECLARE_GLOBAL_DATA_PTR;
-	unsigned int size0 = 0, size1 = 0;
+	unsigned long size0 = 0, size1 = 0;
 	u32 btype;
 
 	btype = get_board_type();
 
 	display_board_info(btype);
 
+	size0 = get_sdr_cs_size(CS0);
 	/*
 	 * If a second bank of DDR is attached to CS1 this is
 	 * where it can be started.  Early init code will init
 	 * memory on CS0.
 	 */
 	if ((sysinfo.mtype == DDR_COMBO) || (sysinfo.mtype == DDR_STACKED)) {
-#if defined (CONFIG_OMAP35XX)
-		emif4_init();
-		/*
-		 * TODO: Need to implement function to calculate
-		 *	DDR size depending on row and coloum size
-		 */
-		size0 = 128 * 1024 * 1024;
-#elif defined (CONFIG_OMAP34XX)
 		do_sdrc_init(CS1, NOT_EARLY);
 		make_cs1_contiguous();
 
-		size0 = get_sdr_cs_size(CS0);
 		size1 = get_sdr_cs_size(CS1);
-#endif
 	}
 
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
diff --git a/cpu/arm_cortexa8/omap3/mem.c b/cpu/arm_cortexa8/omap3/mem.c
index 7fb05ebff5..49047b42d6 100644
--- a/cpu/arm_cortexa8/omap3/mem.c
+++ b/cpu/arm_cortexa8/omap3/mem.c
@@ -254,6 +254,23 @@ void do_sdrc_init(u32 cs, u32 early)
 		writel(0, &sdrc_base->cs[cs].mcfg);
 }
 
+unsigned long calc_size_from_emif4(int cs)
+{
+	unsigned int size;
+#if 0
+	unsigned int reg_pagesize, reg_ebank, reg_ibank, reg_rowsize;
+
+	/*
+	 * TODO: Calculate the DDR size based on EMIF configuration
+	 *	done by x-loader.
+	 */
+	size = 
+#else
+	size = CONFIG_SYS_CS0_SIZE;
+#endif
+
+	return size;
+}
 /********************************************************
  * emif4 _init() - init the emif4 module for DDR access
  *  - early init routines, called from flash or
diff --git a/cpu/arm_cortexa8/omap3/sys_info.c b/cpu/arm_cortexa8/omap3/sys_info.c
index b385b912b4..8077ecf74b 100644
--- a/cpu/arm_cortexa8/omap3/sys_info.c
+++ b/cpu/arm_cortexa8/omap3/sys_info.c
@@ -107,10 +107,15 @@ u32 get_sdr_cs_size(u32 cs)
 {
 	u32 size;
 
+#if defined (CONFIG_OMAP35XX)
+	size = calc_size_from_emif4(cs);
+#elif defined (CONFIG_OMAP34XX)
 	/* get ram size field */
 	size = readl(&sdrc_base->cs[cs].mcfg) >> 8;
 	size &= 0x3FF;		/* remove unwanted bits */
 	size *= SZ_2M;		/* find size in MB */
+#endif
+
 	return size;
 }