diff options
| author | Heiko Schocher <hs@denx.de> | 2019-04-29 16:36:10 +0200 |
|---|---|---|
| committer | Tom Rini <trini@konsulko.com> | 2019-05-03 07:30:31 -0400 |
| commit | 0cac0fb0221de34534e3344d058fe77c375980bb (patch) | |
| tree | 0eee41061b635fc8c35d9bdf52d79248d2ab6eac /include/configs/taurus.h | |
| parent | efbfd448e51a75acbace51849e8bed63e0ea5ce0 (diff) | |
at91: cleanup taurus port
- at91sam9g20-taurus.dts: use labels
- cleanup taurus port to compile clean with
current mainline again. SPL has no serial
output anymore, so it fits into SRAM.
Signed-off-by: Heiko Schocher <hs@denx.de>
Diffstat (limited to 'include/configs/taurus.h')
| -rw-r--r-- | include/configs/taurus.h | 56 |
1 files changed, 51 insertions, 5 deletions
diff --git a/include/configs/taurus.h b/include/configs/taurus.h index c3353d74a9..45a4a800c5 100644 --- a/include/configs/taurus.h +++ b/include/configs/taurus.h @@ -41,6 +41,7 @@ #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG + #define CONFIG_SKIP_LOWLEVEL_INIT_ONLY /* general purpose I/O */ @@ -48,12 +49,9 @@ #define CONFIG_AT91_GPIO #define CONFIG_AT91_GPIO_PULLUP 1 /* keep pullups on peripheral pins */ -/* serial console */ -#define CONFIG_ATMEL_USART #define CONFIG_USART_BASE ATMEL_BASE_DBGU #define CONFIG_USART_ID ATMEL_ID_SYS - /* * SDRAM: 1 bank, min 32, max 128 MB * Initialized before u-boot gets started. @@ -106,7 +104,6 @@ /* SPI EEPROM */ #define TAURUS_SPI_MASK (1 << 4) -#define TAURUS_SPI_CS_PIN AT91_PIN_PA3 #if defined(CONFIG_SPL_BUILD) /* SPL related */ @@ -120,8 +117,57 @@ #define CONFIG_ENV_OFFSET 0x100000 #define CONFIG_ENV_OFFSET_REDUND 0x180000 #define CONFIG_ENV_SIZE (SZ_128K) /* 1 sector = 128 kB */ -#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x300000; bootm" +#ifndef CONFIG_SPL_BUILD +#if defined(CONFIG_BOARD_AXM) +#define CONFIG_EXTRA_ENV_SETTINGS \ + "addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:" \ + "${gatewayip}:${netmask}:${hostname}:${netdev}::off\0" \ + "addtest=setenv bootargs ${bootargs} loglevel=4 test\0" \ + "boot_file=setenv bootfile /${project_dir}/kernel/uImage\0" \ + "boot_retries=0\0" \ + "ethact=macb0\0" \ + "flash_nfs=run nand_kernel;run nfsargs;run addip;" \ + "upgrade_available;bootm ${kernel_ram};reset\0" \ + "flash_self=run nand_kernel;run setbootargs;upgrade_available;" \ + "bootm ${kernel_ram};reset\0" \ + "flash_self_test=run nand_kernel;run setbootargs addtest;" \ + "upgrade_available;bootm ${kernel_ram};reset\0" \ + "hostname=systemone\0" \ + "kernel_Off=0x00200000\0" \ + "kernel_Off_fallback=0x03800000\0" \ + "kernel_ram=0x21500000\0" \ + "kernel_size=0x00400000\0" \ + "kernel_size_fallback=0x00400000\0" \ + "loads_echo=1\0" \ + "nand_kernel=nand read.e ${kernel_ram} ${kernel_Off} " \ + "${kernel_size}\0" \ + "net_nfs=run boot_file;tftp ${kernel_ram} ${bootfile};" \ + "run nfsargs;run addip;upgrade_available;" \ + "bootm ${kernel_ram};reset\0" \ + "netdev=eth0\0" \ + "nfsargs=run root_path;setenv bootargs ${bootargs} root=/dev/nfs " \ + "rw nfsroot=${serverip}:${rootpath} " \ + "at91sam9_wdt.wdt_timeout=16\0" \ + "partitionset_active=A\0" \ + "preboot=echo;echo Type 'run flash_self' to use kernel and root " \ + "filesystem on memory;echo Type 'run flash_nfs' to use " \ + "kernel from memory and root filesystem over NFS;echo Type " \ + "'run net_nfs' to get Kernel over TFTP and mount root " \ + "filesystem over NFS;echo\0" \ + "project_dir=systemone\0" \ + "root_path=setenv rootpath /home/projects/${project_dir}/rootfs\0" \ + "rootfs=/dev/mtdblock5\0" \ + "rootfs_fallback=/dev/mtdblock7\0" \ + "setbootargs=setenv bootargs ${bootargs} console=ttyMTD,mtdoops " \ + "root=${rootfs} rootfstype=jffs2 panic=7 " \ + "at91sam9_wdt.wdt_timeout=16\0" \ + "stderr=serial\0" \ + "stdin=serial\0" \ + "stdout=serial\0" \ + "upgrade_available=0\0" +#endif +#endif /* #ifndef CONFIG_SPL_BUILD */ /* * Size of malloc() pool */ |