Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq

7 files changed, 132 insertions, 14 deletions

diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index 657e3b6d48..bb47813345 100644
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -49,10 +49,12 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_DDR_SPD
 #define SPD_EEPROM_ADDRESS		0x51
 #define CONFIG_SYS_SPD_BUS_NUM		0
-#define CONFIG_SYS_DDR_RAW_TIMING
 
 #define CONFIG_FSL_DDR_INTERACTIVE	/* Interactive debugging */
+#ifndef CONFIG_SYS_FSL_DDR4
 #define CONFIG_SYS_FSL_DDR3		/* Use DDR3 memory */
+#define CONFIG_SYS_DDR_RAW_TIMING
+#endif
 #define CONFIG_DIMM_SLOTS_PER_CTLR	1
 #define CONFIG_CHIP_SELECTS_PER_CTRL	4
 
diff --git a/include/configs/ls2085a_common.h b/include/configs/ls2085a_common.h
index 2bd5a472b3..a72e1f3567 100644
--- a/include/configs/ls2085a_common.h
+++ b/include/configs/ls2085a_common.h
@@ -15,9 +15,11 @@
 #define CONFIG_GICV3
 
 /* Link Definitions */
-#define CONFIG_SYS_TEXT_BASE		0x30000000
+#define CONFIG_SYS_TEXT_BASE		0x30001000
 
+#ifdef CONFIG_EMU
 #define CONFIG_SYS_NO_FLASH
+#endif
 
 #define CONFIG_SUPPORT_RAW_INITRD
 
@@ -45,13 +47,27 @@
 
 #define CONFIG_SYS_FSL_DDR_INTLV_256B	/* force 256 byte interleaving */
 
-/* SMP Definitions */
-#define CPU_RELEASE_ADDR		CONFIG_SYS_INIT_SP_ADDR
-
 #define CONFIG_SYS_DDR_SDRAM_BASE	0x80000000UL
 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY	0
 #define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
 #define CONFIG_SYS_DDR_BLOCK2_BASE	0x8080000000ULL
+#define CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS	2
+
+/*
+ * SMP Definitinos
+ */
+#define CPU_RELEASE_ADDR		secondary_boot_func
+
+#define CONFIG_SYS_FSL_OTHER_DDR_NUM_CTRLS
+#define CONFIG_SYS_DP_DDR_BASE		0x6000000000ULL
+/*
+ * DDR controller use 0 as the base address for binding.
+ * It is mapped to CONFIG_SYS_DP_DDR_BASE for core to access.
+ */
+#define CONFIG_SYS_DP_DDR_BASE_PHY	0
+#define CONFIG_DP_DDR_CTRL		2
+#define CONFIG_DP_DDR_NUM_CTRLS		1
+#define CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR	1
 
 /* Generic Timer Definitions */
 #define COUNTER_FREQUENCY		12000000	/* 12MHz */
@@ -118,6 +134,66 @@
 #define CONFIG_SYS_NOR_FTIM3	0x04000000
 #define CONFIG_SYS_IFC_CCR	0x01000000
 
+#ifndef CONFIG_SYS_NO_FLASH
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+#define CONFIG_SYS_FLASH_QUIET_TEST
+#define CONFIG_FLASH_SHOW_PROGRESS	45 /* count down from 45/5: 9..1 */
+
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* number of banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	1024	/* sectors per device */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
+
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
+#endif
+
+#define CONFIG_NAND_FSL_IFC
+#define CONFIG_SYS_NAND_MAX_ECCPOS	256
+#define CONFIG_SYS_NAND_MAX_OOBFREE	2
+#define CONFIG_SYS_NAND_BASE		0x520000000
+#define CONFIG_SYS_NAND_BASE_PHYS	0x20000000
+
+#define CONFIG_SYS_NAND_CSPR_EXT	(0x0)
+#define CONFIG_SYS_NAND_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
+				| CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
+				| CSPR_MSEL_NAND	/* MSEL = NAND */ \
+				| CSPR_V)
+#define CONFIG_SYS_NAND_AMASK	IFC_AMASK(64 * 1024)
+
+#define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
+				| CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
+				| CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
+				| CSOR_NAND_RAL_3	/* RAL = 2Byes */ \
+				| CSOR_NAND_PGS_2K	/* Page Size = 2K */ \
+				| CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
+				| CSOR_NAND_PB(64))	/*Pages Per Block = 64*/
+
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+
+/* ONFI NAND Flash mode0 Timing Params */
+#define CONFIG_SYS_NAND_FTIM0		(FTIM0_NAND_TCCST(0x07) | \
+					FTIM0_NAND_TWP(0x18)   | \
+					FTIM0_NAND_TWCHT(0x07) | \
+					FTIM0_NAND_TWH(0x0a))
+#define CONFIG_SYS_NAND_FTIM1		(FTIM1_NAND_TADLE(0x32) | \
+					FTIM1_NAND_TWBE(0x39)  | \
+					FTIM1_NAND_TRR(0x0e)   | \
+					FTIM1_NAND_TRP(0x18))
+#define CONFIG_SYS_NAND_FTIM2		(FTIM2_NAND_TRAD(0x0f) | \
+					FTIM2_NAND_TREH(0x0a) | \
+					FTIM2_NAND_TWHRE(0x1e))
+#define CONFIG_SYS_NAND_FTIM3		0x0
+
+#define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CONFIG_MTD_NAND_VERIFY_WRITE
+#define CONFIG_CMD_NAND
+
+#define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
+
 #define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NOR0_CSPR_EXT
 #define CONFIG_SYS_CSPR0		CONFIG_SYS_NOR0_CSPR_EARLY
 #define CONFIG_SYS_CSPR0_FINAL		CONFIG_SYS_NOR0_CSPR
@@ -167,6 +243,7 @@
 
 /* Miscellaneous configurable options */
 #define CONFIG_SYS_LOAD_ADDR	(CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
+#define CONFIG_ARCH_EARLY_INIT_R
 
 /* Physical Memory Map */
 /* fixme: these need to be checked against the board */
@@ -174,7 +251,7 @@
 #define CONFIG_SYS_CLK_FREQ	133333333
 
 
-#define CONFIG_NR_DRAM_BANKS		2
+#define CONFIG_NR_DRAM_BANKS		3
 
 #define CONFIG_SYS_HZ			1000
 
diff --git a/include/configs/ls2085a_emu.h b/include/configs/ls2085a_emu.h
index a5cea63b33..487cd99c5d 100644
--- a/include/configs/ls2085a_emu.h
+++ b/include/configs/ls2085a_emu.h
@@ -13,6 +13,7 @@
 #define CONFIG_SYS_FSL_DDR_EMU		/* Support emulator */
 #define SPD_EEPROM_ADDRESS1	0x51
 #define SPD_EEPROM_ADDRESS2	0x52
+#define SPD_EEPROM_ADDRESS3	0x53
 #define SPD_EEPROM_ADDRESS	SPD_EEPROM_ADDRESS1
 #define CONFIG_SYS_SPD_BUS_NUM	1	/* SPD on I2C bus 1 */
 
diff --git a/include/configs/ls2085a_simu.h b/include/configs/ls2085a_simu.h
index 46d47b06e4..0f40b787b4 100644
--- a/include/configs/ls2085a_simu.h
+++ b/include/configs/ls2085a_simu.h
@@ -13,4 +13,13 @@
 #define CONFIG_SMC91111
 #define CONFIG_SMC91111_BASE	(0x2210000)
 
+#define CONFIG_SYS_CSPR1_EXT		CONFIG_SYS_NAND_CSPR_EXT
+#define CONFIG_SYS_CSPR1		CONFIG_SYS_NAND_CSPR
+#define CONFIG_SYS_AMASK1		CONFIG_SYS_NAND_AMASK
+#define CONFIG_SYS_CSOR1		CONFIG_SYS_NAND_CSOR
+#define CONFIG_SYS_CS1_FTIM0		CONFIG_SYS_NAND_FTIM0
+#define CONFIG_SYS_CS1_FTIM1		CONFIG_SYS_NAND_FTIM1
+#define CONFIG_SYS_CS1_FTIM2		CONFIG_SYS_NAND_FTIM2
+#define CONFIG_SYS_CS1_FTIM3		CONFIG_SYS_NAND_FTIM3
+
 #endif /* __LS2_SIMU_H */
diff --git a/include/fdt_support.h b/include/fdt_support.h
index 1bda686a0b..c3d1fbcf35 100644
--- a/include/fdt_support.h
+++ b/include/fdt_support.h
@@ -133,6 +133,18 @@ static inline int fdt_status_fail_by_alias(void *fdt, const char *alias)
 	return fdt_set_status_by_alias(fdt, alias, FDT_STATUS_FAIL, 0);
 }
 
+/* Helper to read a big number; size is in cells (not bytes) */
+static inline u64 of_read_number(const fdt32_t *cell, int size)
+{
+	u64 r = 0;
+	while (size--)
+		r = (r << 32) | fdt32_to_cpu(*(cell++));
+	return r;
+}
+
+void of_bus_default_count_cells(void *blob, int parentoffset,
+					int *addrc, int *sizec);
+
 #endif /* ifdef CONFIG_OF_LIBFDT */
 
 #ifdef USE_HOSTCC
diff --git a/include/fsl_ddr.h b/include/fsl_ddr.h
index 5c49b229da..675557ad1f 100644
--- a/include/fsl_ddr.h
+++ b/include/fsl_ddr.h
@@ -15,6 +15,11 @@
 
 #include <common_timing_params.h>
 
+#ifndef CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS
+/* All controllers are for main memory */
+#define CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS	CONFIG_NUM_DDR_CONTROLLERS
+#endif
+
 #ifdef CONFIG_SYS_FSL_DDR_LE
 #define ddr_in32(a)	in_le32(a)
 #define ddr_out32(a, v)	out_le32(a, v)
@@ -57,6 +62,13 @@ typedef struct {
 	memctl_options_t memctl_opts[CONFIG_SYS_NUM_DDR_CTLRS];
 	common_timing_params_t common_timing_params[CONFIG_SYS_NUM_DDR_CTLRS];
 	fsl_ddr_cfg_regs_t fsl_ddr_config_reg[CONFIG_SYS_NUM_DDR_CTLRS];
+	unsigned int first_ctrl;
+	unsigned int num_ctrls;
+	unsigned long long mem_base;
+	unsigned int dimm_slots_per_ctrl;
+	int (*board_need_mem_reset)(void);
+	void (*board_mem_reset)(void);
+	void (*board_mem_de_reset)(void);
 } fsl_ddr_info_t;
 
 /* Compute steps */
@@ -72,7 +84,6 @@ typedef struct {
 unsigned long long
 fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step,
 				       unsigned int size_only);
-
 const char *step_to_string(unsigned int step);
 
 unsigned int compute_fsl_memctl_config_regs(const memctl_options_t *popts,
@@ -102,7 +113,7 @@ void fsl_ddr_set_lawbar(
 int fsl_ddr_interactive_env_var_exists(void);
 unsigned long long fsl_ddr_interactive(fsl_ddr_info_t *pinfo, int var_is_set);
 void fsl_ddr_get_spd(generic_spd_eeprom_t *ctrl_dimms_spd,
-			   unsigned int ctrl_num);
+		     unsigned int ctrl_num, unsigned int dimm_slots_per_ctrl);
 
 int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
 unsigned int check_fsl_memctl_config_regs(const fsl_ddr_cfg_regs_t *ddr);
diff --git a/include/fsl_ddr_sdram.h b/include/fsl_ddr_sdram.h
index 987119b014..5b03c14c55 100644
--- a/include/fsl_ddr_sdram.h
+++ b/include/fsl_ddr_sdram.h
@@ -51,7 +51,6 @@ typedef ddr2_spd_eeprom_t generic_spd_eeprom_t;
 #define CONFIG_FSL_SDRAM_TYPE	SDRAM_TYPE_DDR2
 #endif
 #elif defined(CONFIG_SYS_FSL_DDR3)
-#define FSL_DDR_MIN_TCKE_PULSE_WIDTH_DDR	(3)	/* FIXME */
 typedef ddr3_spd_eeprom_t generic_spd_eeprom_t;
 #ifndef CONFIG_FSL_SDRAM_TYPE
 #define CONFIG_FSL_SDRAM_TYPE	SDRAM_TYPE_DDR3
@@ -352,7 +351,6 @@ typedef struct memctl_options_s {
 	unsigned int twot_en;
 	unsigned int threet_en;
 	unsigned int bstopre;
-	unsigned int tcke_clock_pulse_width_ps;	/* tCKE */
 	unsigned int tfaw_window_four_activates_ps;	/* tFAW --  FOUR_ACT */
 
 	/* Rtt impedance */
@@ -379,12 +377,20 @@ typedef struct memctl_options_s {
 	unsigned int trwt;			/* read-to-write turnaround */
 } memctl_options_t;
 
-extern phys_size_t fsl_ddr_sdram(void);
-extern phys_size_t fsl_ddr_sdram_size(void);
+phys_size_t fsl_ddr_sdram(void);
+phys_size_t fsl_ddr_sdram_size(void);
+phys_size_t fsl_other_ddr_sdram(unsigned long long base,
+				unsigned int first_ctrl,
+				unsigned int num_ctrls,
+				unsigned int dimm_slots_per_ctrl,
+				int (*board_need_reset)(void),
+				void (*board_reset)(void),
+				void (*board_de_reset)(void));
 extern int fsl_use_spd(void);
-extern void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
-					unsigned int ctrl_num, int step);
+void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
+			     unsigned int ctrl_num, int step);
 u32 fsl_ddr_get_intl3r(void);
+void print_ddr_info(unsigned int start_ctrl);
 
 static void __board_assert_mem_reset(void)
 {