sh: ms7722: Remove the board

Last change to this board was done in 2016, has no prospects of
ever being converted to DM, drop it.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Chris Brandt <chris.brandt@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Vladimir Zapolskiy <vz@mleia.com>
Cc: Yoshihiro Shimoda <shimoda.yoshihiro.uh@renesas.com>

1 files changed, 0 insertions, 83 deletions

diff --git a/include/configs/ms7722se.h b/include/configs/ms7722se.h
deleted file mode 100644
index 241ba69fa0..0000000000
--- a/include/configs/ms7722se.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Configuation settings for the Hitachi Solution Engine 7722
- *
- * Copyright (C) 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- */
-
-#ifndef __MS7722SE_H
-#define __MS7722SE_H
-
-#define CONFIG_CPU_SH7722	1
-
-#define CONFIG_DISPLAY_BOARDINFO
-#undef  CONFIG_SHOW_BOOT_PROGRESS
-
-/* SMC9111 */
-#define CONFIG_SMC91111
-#define CONFIG_SMC91111_BASE    (0xB8000000)
-
-/* MEMORY */
-#define MS7722SE_SDRAM_BASE	(0x8C000000)
-#define MS7722SE_FLASH_BASE_1	(0xA0000000)
-#define MS7722SE_FLASH_BANK_SIZE	(8*1024 * 1024)
-
-#define CONFIG_SYS_PBSIZE		256		/* Buffer size for Console output */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 115200 }	/* List of legal baudrate settings for this board */
-
-/* SCIF */
-#define CONFIG_CONS_SCIF0	1
-
-#define CONFIG_SYS_MEMTEST_START	(MS7722SE_SDRAM_BASE)
-#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024))
-
-#undef  CONFIG_SYS_MEMTEST_SCRATCH	/* Scratch address used by the alternate memory test */
-
-#undef  CONFIG_SYS_LOADS_BAUD_CHANGE	/* Enable temporary baudrate change while serial download */
-
-#define CONFIG_SYS_SDRAM_BASE	(MS7722SE_SDRAM_BASE)
-#define CONFIG_SYS_SDRAM_SIZE	(64 * 1024 * 1024)	/* maybe more, but if so u-boot doesn't know about it... */
-
-#define CONFIG_SYS_LOAD_ADDR	(CONFIG_SYS_SDRAM_BASE + 4 * 1024 * 1024)	/* default load address for scripts ?!? */
-
-#define CONFIG_SYS_MONITOR_BASE	(MS7722SE_FLASH_BASE_1)	/* Address of u-boot image
-							in Flash (NOT run time address in SDRAM) ?!? */
-#define CONFIG_SYS_MONITOR_LEN	(128 * 1024)		/* */
-#define CONFIG_SYS_MALLOC_LEN	(256 * 1024)		/* Size of DRAM reserved for malloc() use */
-#define CONFIG_SYS_BOOTMAPSZ	(8 * 1024 * 1024)
-
-/* FLASH */
-#undef  CONFIG_SYS_FLASH_QUIET_TEST
-#define CONFIG_SYS_FLASH_EMPTY_INFO			/* print 'E' for empty sector on flinfo */
-
-#define CONFIG_SYS_FLASH_BASE		(MS7722SE_FLASH_BASE_1)	/* Physical start address of Flash memory */
-
-#define CONFIG_SYS_MAX_FLASH_SECT	150		/* Max number of sectors on each
-							Flash chip */
-
-/* if you use all NOR Flash , you change dip-switch. Please see MS7722SE01 Manual. */
-#define CONFIG_SYS_MAX_FLASH_BANKS	2
-#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE + (0 * MS7722SE_FLASH_BANK_SIZE), \
-				  CONFIG_SYS_FLASH_BASE + (1 * MS7722SE_FLASH_BANK_SIZE), \
-				}
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	(3 * 1000)	/* Timeout for Flash erase operations (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	(3 * 1000)	/* Timeout for Flash write operations (in ms) */
-#define CONFIG_SYS_FLASH_LOCK_TOUT	(3 * 1000)	/* Timeout for Flash set sector lock bit operations (in ms) */
-#define CONFIG_SYS_FLASH_UNLOCK_TOUT	(3 * 1000)	/* Timeout for Flash clear lock bit operations (in ms) */
-
-#undef  CONFIG_SYS_DIRECT_FLASH_TFTP
-
-#define CONFIG_ENV_OVERWRITE	1
-#define CONFIG_ENV_SECT_SIZE	(8 * 1024)
-#define CONFIG_ENV_SIZE		(CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + (1 * CONFIG_ENV_SECT_SIZE))
-#define CONFIG_ENV_OFFSET		(CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)	/* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */
-#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_ADDR_REDUND	(CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE))
-
-/* Board Clock */
-#define CONFIG_SYS_CLK_FREQ	33333333
-#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
-
-#endif	/* __MS7722SE_H */