Merge branch 'master' of git://git.denx.de/u-boot-marvell

1 files changed, 172 insertions, 0 deletions

diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h
new file mode 100644
index 0000000000..c3d95a04c4
--- /dev/null
+++ b/include/configs/edminiv2.h
@@ -0,0 +1,172 @@
+/*
+ * Copyright (C) 2010 Albert ARIBAUD <albert.aribaud@free.fr>
+ *
+ * Based on original Kirkwood support which is
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef _CONFIG_EDMINIV2_H
+#define _CONFIG_EDMINIV2_H
+
+/*
+ * Version number information
+ */
+
+#define CONFIG_IDENT_STRING	" EDMiniV2"
+
+/*
+ * High Level Configuration Options (easy to change)
+ */
+
+#define CONFIG_MARVELL		1
+#define CONFIG_ARM926EJS	1	/* Basic Architecture */
+#define CONFIG_FEROCEON		1	/* CPU Core subversion */
+#define CONFIG_ORION5X		1	/* SOC Family Name */
+#define CONFIG_88F5182		1	/* SOC Name */
+#define CONFIG_MACH_EDMINIV2	1	/* Machine type */
+
+/*
+ * CLKs configurations
+ */
+
+#define CONFIG_SYS_HZ		1000
+
+/*
+ * Board-specific values for Orion5x MPP low level init:
+ * - MPPs 12 to 15 are SATA LEDs (mode 5)
+ * - Others are GPIO/unused (mode 3 for MPP0, mode 5 for
+ *   MPP16 to MPP19, mode 0 for others
+ */
+
+#define ORION5X_MPP0_7		0x00000003
+#define ORION5X_MPP8_15		0x55550000
+#define ORION5X_MPP16_23	0x00000000
+
+/*
+ * Board-specific values for Orion5x GPIO low level init:
+ * - GPIO3 is input (RTC interrupt)
+ * - GPIO16 is Power LED control (0 = on, 1 = off)
+ * - GPIO17 is Power LED source select (0 = CPLD, 1 = GPIO16)
+ * - GPIO18 is Power Button status (0 = Released, 1 = Pressed)
+ * - Last GPIO is 26, further bits are supposed to be 0.
+ * Enable mask has ones for INPUT, 0 for OUTPUT.
+ * Default is LED ON.
+ */
+
+#define ORION5X_GPIO_OUT_ENABLE	0x03fcffff
+#define ORION5X_GPIO_OUT_VALUE	0x03fcffff
+
+/*
+ * NS16550 Configuration
+ */
+
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
+#define CONFIG_SYS_NS16550_CLK		CONFIG_SYS_TCLK
+#define CONFIG_SYS_NS16550_COM1		ORION5X_UART0_BASE
+
+/*
+ * Serial Port configuration
+ * The following definitions let you select what serial you want to use
+ * for your console driver.
+ */
+
+#define CONFIG_CONS_INDEX	1	/*Console on UART0 */
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_SYS_BAUDRATE_TABLE \
+	{ 9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600 }
+
+/*
+ * FLASH configuration
+ */
+
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_FLASH_CFI_LEGACY
+#define CONFIG_SYS_MAX_FLASH_BANKS	1  /* max num of flash banks       */
+#define CONFIG_SYS_MAX_FLASH_SECT	11 /* max num of sects on one chip */
+#define CONFIG_SYS_FLASH_BASE		0xfff80000
+#define CONFIG_SYS_FLASH_SECTSZ \
+	{16384, 8192, 8192, 32768, \
+	 65536, 65536, 65536, 65536, 65536, 65536, 65536}
+
+/* auto boot */
+#define CONFIG_BOOTDELAY	3	/* default enable autoboot */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs  */
+#define CONFIG_INITRD_TAG	1	/* enable INITRD tag */
+#define CONFIG_SETUP_MEMORY_TAGS 1	/* enable memory tag */
+
+#define	CONFIG_SYS_PROMPT	"EDMiniV2> "	/* Command Prompt */
+#define	CONFIG_SYS_CBSIZE	1024	/* Console I/O Buff Size */
+#define	CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE \
+		+sizeof(CONFIG_SYS_PROMPT) + 16)	/* Print Buff */
+/*
+ * Commands configuration - using default command set for now
+ */
+#include <config_cmd_default.h>
+/*
+ * Disabling some default commands for staggered bring-up
+ */
+#undef CONFIG_CMD_BOOTD	/* no bootd since no net */
+#undef CONFIG_CMD_NET	/* no net since no eth */
+#undef CONFIG_CMD_NFS	/* no NFS since no net */
+
+/*
+ *  Environment variables configurations
+ */
+#define CONFIG_ENV_IS_IN_FLASH		1
+#define CONFIG_ENV_SECT_SIZE		0x2000	/* 16K */
+#define CONFIG_ENV_SIZE			0x2000
+#define CONFIG_ENV_OFFSET		0x4000	/* env starts here */
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN	(1024 * 128) /* 128kB for malloc() */
+/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_SIZE	128
+
+/*
+ * Other required minimal configurations
+ */
+#define CONFIG_CONSOLE_INFO_QUIET	/* some code reduction */
+#define CONFIG_ARCH_CPU_INIT		/* call arch_cpu_init() */
+#define CONFIG_ARCH_MISC_INIT		/* call arch_misc_init() */
+#define CONFIG_DISPLAY_CPUINFO		/* Display cpu info */
+#define CONFIG_NR_DRAM_BANKS		1
+
+#define CONFIG_STACKSIZE		0x00100000
+#define CONFIG_SYS_LOAD_ADDR		0x00800000
+#define CONFIG_SYS_MEMTEST_START	0x00400000
+#define CONFIG_SYS_MEMTEST_END		0x007fffff
+#define CONFIG_SYS_RESET_ADDRESS	0xffff0000
+#define CONFIG_SYS_MAXARGS		16
+
+#endif /* _CONFIG_EDMINIV2_H */