board/BuR: move everything possible from board's headerfile to KConfig

We drop everything possible things from board headerfiles and replace
this functionality with responsible settings in Kconfig (_defconfig).

Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at>
Reviewed-by: Tom Rini <trini@konsulko.com>

3 files changed, 0 insertions, 22 deletions

diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h
index e6669336a5..8429cf511a 100644
--- a/include/configs/bur_am335x_common.h
+++ b/include/configs/bur_am335x_common.h
@@ -24,7 +24,6 @@
 "setenv stdout nc;setenv stdin nc;setenv stderr nc\0"
 
 #define CONFIG_PREBOOT			"run brdefaultip"
-#define CONFIG_CMD_TIME
 
 
 #define CONFIG_AM33XX
@@ -53,19 +52,16 @@
 #define CONFIG_BAUDRATE			115200
 
 /* Network defines */
-#define CONFIG_CMD_DHCP
 #define CONFIG_BOOTP_DNS		/* Configurable parts of CMD_DHCP */
 #define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_SUBNETMASK
 #define CONFIG_NET_RETRY_COUNT		2
-#define CONFIG_CMD_PING
 #define CONFIG_DRIVER_TI_CPSW		/* Driver for IP block */
 #define CONFIG_MII			/* Required in net/eth.c */
 #define CONFIG_PHYLIB
 #define CONFIG_PHY_NATSEMI
 /* Network console */
-#define CONFIG_NETCONSOLE			1
 #define CONFIG_BOOTP_MAY_FAIL		/* if we don't have DHCP environment */
 /*
  * SPL related defines.  The Public RAM memory map the ROM defines the
@@ -105,7 +101,6 @@
 #define CONFIG_SYS_OMAP24_I2C_SPEED	100000
 #define CONFIG_SYS_OMAP24_I2C_SLAVE	1
 #define CONFIG_SYS_I2C_OMAP24XX
-#define CONFIG_CMD_I2C
 /* GPIO */
 #define CONFIG_OMAP_GPIO
 /*
@@ -119,7 +114,6 @@
  * console baudrate of 115200 and use the default baud rate table.
  */
 #define CONFIG_SYS_MALLOC_LEN		(5120 << 10)
-#define CONFIG_SYS_HUSH_PARSER
 #define CONFIG_SYS_CONSOLE_INFO_QUIET
 #define CONFIG_ENV_OVERWRITE		/* Overwrite ethaddr / serial# */
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
diff --git a/include/configs/kwb.h b/include/configs/kwb.h
index 45253b8118..e570c71741 100644
--- a/include/configs/kwb.h
+++ b/include/configs/kwb.h
@@ -106,7 +106,6 @@ BUR_COMMON_ENV \
 #undef	CONFIG_BOOTM_NETBSD
 #undef	CONFIG_BOOTM_PLAN9
 #undef	CONFIG_BOOTM_RTEMS
-#undef CONFIG_CMD_CRC32
 
 /* Support both device trees and ATAGs. */
 #define CONFIG_OF_LIBFDT
@@ -122,17 +121,11 @@ BUR_COMMON_ENV \
 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
 /* attention! not only for gadget, enables also highspeed in hostmode */
 #define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_MUSB_HOST
 #define CONFIG_AM335X_USB0
 #define CONFIG_AM335X_USB0_MODE	MUSB_HOST
 #define CONFIG_AM335X_USB1
 #define CONFIG_AM335X_USB1_MODE	MUSB_HOST
 
-#ifdef CONFIG_USB_MUSB_HOST
-#define CONFIG_CMD_USB
-#define CONFIG_USB_STORAGE
-#endif /* CONFIG_USB_MUSB_HOST */
-
 #undef CONFIG_ENV_IS_NOWHERE
 #define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV		0
diff --git a/include/configs/tseries.h b/include/configs/tseries.h
index 93e34544cb..2d352ed320 100644
--- a/include/configs/tseries.h
+++ b/include/configs/tseries.h
@@ -204,7 +204,6 @@ MMCARGS
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE		0x8000000
 #define CONFIG_NAND_OMAP_GPMC
-#define CONFIG_CMD_NAND
 /* don't change OMAP_ELM, ECCSCHEME. ROM code only supports this */
 #define CONFIG_NAND_OMAP_ELM
 #define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW
@@ -249,23 +248,15 @@ MMCARGS
 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
 /* attention! not only for gadget, enables also highspeed in hostmode */
 #define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_MUSB_HOST
 #define CONFIG_AM335X_USB0
 #define CONFIG_AM335X_USB0_MODE	MUSB_HOST
 #define CONFIG_AM335X_USB1
 #define CONFIG_AM335X_USB1_MODE MUSB_HOST
 
-#ifdef CONFIG_USB_MUSB_HOST
-#define CONFIG_CMD_USB
-#define CONFIG_USB_STORAGE
-#endif /* CONFIG_USB_MUSB_HOST */
-
 #if defined(CONFIG_SPI_BOOT)
 /* McSPI IP block */
 #define CONFIG_SPI
 #define CONFIG_OMAP3_SPI
-#define CONFIG_CMD_SPI
-#define CONFIG_CMD_SF
 #define CONFIG_SF_DEFAULT_SPEED		24000000
 
 #define CONFIG_SPL_SPI_SUPPORT