Move lib_$ARCH directories to arch/$ARCH/lib

Also move lib_$ARCH/config.mk to arch/$ARCH/config.mk

This change is intended to clean up the top-level directory structure
and more closely mimic Linux's directory organization.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

1 files changed, 0 insertions, 1084 deletions

diff --git a/lib_ppc/board.c b/lib_ppc/board.c
deleted file mode 100644
index a30acee4fe..0000000000
--- a/lib_ppc/board.c
+++ /dev/null
@@ -1,1084 +0,0 @@
-/*
- * (C) Copyright 2000-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <watchdog.h>
-#include <command.h>
-#include <malloc.h>
-#include <stdio_dev.h>
-#ifdef CONFIG_8xx
-#include <mpc8xx.h>
-#endif
-#ifdef CONFIG_5xx
-#include <mpc5xx.h>
-#endif
-#ifdef CONFIG_MPC5xxx
-#include <mpc5xxx.h>
-#endif
-#if defined(CONFIG_CMD_IDE)
-#include <ide.h>
-#endif
-#if defined(CONFIG_CMD_SCSI)
-#include <scsi.h>
-#endif
-#if defined(CONFIG_CMD_KGDB)
-#include <kgdb.h>
-#endif
-#ifdef CONFIG_STATUS_LED
-#include <status_led.h>
-#endif
-#include <net.h>
-#ifdef CONFIG_GENERIC_MMC
-#include <mmc.h>
-#endif
-#include <serial.h>
-#ifdef CONFIG_SYS_ALLOC_DPRAM
-#if !defined(CONFIG_CPM2)
-#include <commproc.h>
-#endif
-#endif
-#include <version.h>
-#if defined(CONFIG_BAB7xx)
-#include <w83c553f.h>
-#endif
-#include <dtt.h>
-#if defined(CONFIG_POST)
-#include <post.h>
-#endif
-#if defined(CONFIG_LOGBUFFER)
-#include <logbuff.h>
-#endif
-#if defined(CONFIG_SYS_INIT_RAM_LOCK) && defined(CONFIG_E500)
-#include <asm/cache.h>
-#endif
-#ifdef CONFIG_PS2KBD
-#include <keyboard.h>
-#endif
-
-#ifdef CONFIG_ADDR_MAP
-#include <asm/mmu.h>
-#endif
-
-#ifdef CONFIG_MP
-#include <asm/mp.h>
-#endif
-
-#ifdef CONFIG_BITBANGMII
-#include <miiphy.h>
-#endif
-
-#ifdef CONFIG_SYS_UPDATE_FLASH_SIZE
-extern int update_flash_size (int flash_size);
-#endif
-
-#if defined(CONFIG_SC3)
-extern void sc3_read_eeprom(void);
-#endif
-
-#if defined(CONFIG_CMD_DOC)
-void doc_init (void);
-#endif
-#if defined(CONFIG_HARD_I2C) || \
-    defined(CONFIG_SOFT_I2C)
-#include <i2c.h>
-#endif
-#include <spi.h>
-#include <nand.h>
-
-static char *failed = "*** failed ***\n";
-
-#if defined(CONFIG_OXC) || defined(CONFIG_PCU_E) || defined(CONFIG_RMU)
-extern flash_info_t flash_info[];
-#endif
-
-#if defined(CONFIG_START_IDE)
-extern int board_start_ide(void);
-#endif
-#include <environment.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_ENV_IS_EMBEDDED)
-#define TOTAL_MALLOC_LEN	CONFIG_SYS_MALLOC_LEN
-#elif ( ((CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) < CONFIG_SYS_MONITOR_BASE) || \
-	(CONFIG_ENV_ADDR >= (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)) ) || \
-      defined(CONFIG_ENV_IS_IN_NVRAM)
-#define	TOTAL_MALLOC_LEN	(CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE)
-#else
-#define	TOTAL_MALLOC_LEN	CONFIG_SYS_MALLOC_LEN
-#endif
-
-#if !defined(CONFIG_SYS_MEM_TOP_HIDE)
-#define CONFIG_SYS_MEM_TOP_HIDE	0
-#endif
-
-extern ulong __init_end;
-extern ulong _end;
-ulong monitor_flash_len;
-
-#if defined(CONFIG_CMD_BEDBUG)
-#include <bedbug/type.h>
-#endif
-
-/************************************************************************
- * Utilities								*
- ************************************************************************
- */
-
-/*
- * All attempts to come up with a "common" initialization sequence
- * that works for all boards and architectures failed: some of the
- * requirements are just _too_ different. To get rid of the resulting
- * mess of board dependend #ifdef'ed code we now make the whole
- * initialization sequence configurable to the user.
- *
- * The requirements for any new initalization function is simple: it
- * receives a pointer to the "global data" structure as it's only
- * argument, and returns an integer return code, where 0 means
- * "continue" and != 0 means "fatal error, hang the system".
- */
-typedef int (init_fnc_t) (void);
-
-/************************************************************************
- * Init Utilities							*
- ************************************************************************
- * Some of this code should be moved into the core functions,
- * but let's get it working (again) first...
- */
-
-static int init_baudrate (void)
-{
-	char tmp[64];	/* long enough for environment variables */
-	int i = getenv_r ("baudrate", tmp, sizeof (tmp));
-
-	gd->baudrate = (i > 0)
-			? (int) simple_strtoul (tmp, NULL, 10)
-			: CONFIG_BAUDRATE;
-	return (0);
-}
-
-/***********************************************************************/
-
-void __board_add_ram_info(int use_default)
-{
-	/* please define platform specific board_add_ram_info() */
-}
-void board_add_ram_info(int) __attribute__((weak, alias("__board_add_ram_info")));
-
-
-static int init_func_ram (void)
-{
-#ifdef	CONFIG_BOARD_TYPES
-	int board_type = gd->board_type;
-#else
-	int board_type = 0;	/* use dummy arg */
-#endif
-	puts ("DRAM:  ");
-
-	if ((gd->ram_size = initdram (board_type)) > 0) {
-		print_size (gd->ram_size, "");
-		board_add_ram_info(0);
-		putc('\n');
-		return (0);
-	}
-	puts (failed);
-	return (1);
-}
-
-/***********************************************************************/
-
-#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
-static int init_func_i2c (void)
-{
-	puts ("I2C:   ");
-	i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-	puts ("ready\n");
-	return (0);
-}
-#endif
-
-#if defined(CONFIG_HARD_SPI)
-static int init_func_spi (void)
-{
-	puts ("SPI:   ");
-	spi_init ();
-	puts ("ready\n");
-	return (0);
-}
-#endif
-
-/***********************************************************************/
-
-#if defined(CONFIG_WATCHDOG)
-static int init_func_watchdog_init (void)
-{
-	puts ("       Watchdog enabled\n");
-	WATCHDOG_RESET ();
-	return (0);
-}
-# define INIT_FUNC_WATCHDOG_INIT	init_func_watchdog_init,
-
-static int init_func_watchdog_reset (void)
-{
-	WATCHDOG_RESET ();
-	return (0);
-}
-# define INIT_FUNC_WATCHDOG_RESET	init_func_watchdog_reset,
-#else
-# define INIT_FUNC_WATCHDOG_INIT	/* undef */
-# define INIT_FUNC_WATCHDOG_RESET	/* undef */
-#endif /* CONFIG_WATCHDOG */
-
-/************************************************************************
- * Initialization sequence						*
- ************************************************************************
- */
-
-init_fnc_t *init_sequence[] = {
-#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
-	probecpu,
-#endif
-#if defined(CONFIG_BOARD_EARLY_INIT_F)
-	board_early_init_f,
-#endif
-#if !defined(CONFIG_8xx_CPUCLK_DEFAULT)
-	get_clocks,		/* get CPU and bus clocks (etc.) */
-#if defined(CONFIG_TQM8xxL) && !defined(CONFIG_TQM866M) \
-    && !defined(CONFIG_TQM885D)
-	adjust_sdram_tbs_8xx,
-#endif
-	init_timebase,
-#endif
-#ifdef CONFIG_SYS_ALLOC_DPRAM
-#if !defined(CONFIG_CPM2)
-	dpram_init,
-#endif
-#endif
-#if defined(CONFIG_BOARD_POSTCLK_INIT)
-	board_postclk_init,
-#endif
-	env_init,
-#if defined(CONFIG_8xx_CPUCLK_DEFAULT)
-	get_clocks_866,		/* get CPU and bus clocks according to the environment variable */
-	sdram_adjust_866,	/* adjust sdram refresh rate according to the new clock */
-	init_timebase,
-#endif
-	init_baudrate,
-	serial_init,
-	console_init_f,
-	display_options,
-#if defined(CONFIG_8260)
-	prt_8260_rsr,
-	prt_8260_clks,
-#endif /* CONFIG_8260 */
-#if defined(CONFIG_MPC83xx)
-	prt_83xx_rsr,
-#endif
-	checkcpu,
-#if defined(CONFIG_MPC5xxx)
-	prt_mpc5xxx_clks,
-#endif /* CONFIG_MPC5xxx */
-#if defined(CONFIG_MPC8220)
-	prt_mpc8220_clks,
-#endif
-	checkboard,
-	INIT_FUNC_WATCHDOG_INIT
-#if defined(CONFIG_MISC_INIT_F)
-	misc_init_f,
-#endif
-	INIT_FUNC_WATCHDOG_RESET
-#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
-	init_func_i2c,
-#endif
-#if defined(CONFIG_HARD_SPI)
-	init_func_spi,
-#endif
-#ifdef CONFIG_POST
-	post_init_f,
-#endif
-	INIT_FUNC_WATCHDOG_RESET
-	init_func_ram,
-#if defined(CONFIG_SYS_DRAM_TEST)
-	testdram,
-#endif /* CONFIG_SYS_DRAM_TEST */
-	INIT_FUNC_WATCHDOG_RESET
-
-	NULL,			/* Terminate this list */
-};
-
-ulong get_effective_memsize(void)
-{
-#ifndef	CONFIG_VERY_BIG_RAM
-	return gd->ram_size;
-#else
-	/* limit stack to what we can reasonable map */
-	return ((gd->ram_size > CONFIG_MAX_MEM_MAPPED) ?
-		 CONFIG_MAX_MEM_MAPPED : gd->ram_size);
-#endif
-}
-
-/************************************************************************
- *
- * This is the first part of the initialization sequence that is
- * implemented in C, but still running from ROM.
- *
- * The main purpose is to provide a (serial) console interface as
- * soon as possible (so we can see any error messages), and to
- * initialize the RAM so that we can relocate the monitor code to
- * RAM.
- *
- * Be aware of the restrictions: global data is read-only, BSS is not
- * initialized, and stack space is limited to a few kB.
- *
- ************************************************************************
- */
-
-#ifdef CONFIG_LOGBUFFER
-unsigned long logbuffer_base(void)
-{
-	return CONFIG_SYS_SDRAM_BASE + get_effective_memsize() - LOGBUFF_LEN;
-}
-#endif
-
-void board_init_f (ulong bootflag)
-{
-	bd_t *bd;
-	ulong len, addr, addr_sp;
-	ulong *s;
-	gd_t *id;
-	init_fnc_t **init_fnc_ptr;
-#ifdef CONFIG_PRAM
-	int i;
-	ulong reg;
-	uchar tmp[64];		/* long enough for environment variables */
-#endif
-
-	/* Pointer is writable since we allocated a register for it */
-	gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
-	/* compiler optimization barrier needed for GCC >= 3.4 */
-	__asm__ __volatile__("": : :"memory");
-
-#if !defined(CONFIG_CPM2) && !defined(CONFIG_MPC512X) && \
-    !defined(CONFIG_MPC83xx) && !defined(CONFIG_MPC85xx) && \
-    !defined(CONFIG_MPC86xx)
-	/* Clear initial global data */
-	memset ((void *) gd, 0, sizeof (gd_t));
-#endif
-
-	for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
-		if ((*init_fnc_ptr) () != 0) {
-			hang ();
-		}
-	}
-
-	/*
-	 * Now that we have DRAM mapped and working, we can
-	 * relocate the code and continue running from DRAM.
-	 *
-	 * Reserve memory at end of RAM for (top down in that order):
-	 *  - area that won't get touched by U-Boot and Linux (optional)
-	 *  - kernel log buffer
-	 *  - protected RAM
-	 *  - LCD framebuffer
-	 *  - monitor code
-	 *  - board info struct
-	 */
-	len = (ulong)&_end - CONFIG_SYS_MONITOR_BASE;
-
-	/*
-	 * Subtract specified amount of memory to hide so that it won't
-	 * get "touched" at all by U-Boot. By fixing up gd->ram_size
-	 * the Linux kernel should now get passed the now "corrected"
-	 * memory size and won't touch it either. This should work
-	 * for arch/ppc and arch/powerpc. Only Linux board ports in
-	 * arch/powerpc with bootwrapper support, that recalculate the
-	 * memory size from the SDRAM controller setup will have to
-	 * get fixed.
-	 */
-	gd->ram_size -= CONFIG_SYS_MEM_TOP_HIDE;
-
-	addr = CONFIG_SYS_SDRAM_BASE + get_effective_memsize();
-
-#if defined(CONFIG_MP) && (defined(CONFIG_MPC86xx) || defined(CONFIG_E500))
-	/*
-	 * We need to make sure the location we intend to put secondary core
-	 * boot code is reserved and not used by any part of u-boot
-	 */
-	if (addr > determine_mp_bootpg()) {
-		addr = determine_mp_bootpg();
-		debug ("Reserving MP boot page to %08lx\n", addr);
-	}
-#endif
-
-#ifdef CONFIG_LOGBUFFER
-#ifndef CONFIG_ALT_LB_ADDR
-	/* reserve kernel log buffer */
-	addr -= (LOGBUFF_RESERVE);
-	debug ("Reserving %dk for kernel logbuffer at %08lx\n", LOGBUFF_LEN, addr);
-#endif
-#endif
-
-#ifdef CONFIG_PRAM
-	/*
-	 * reserve protected RAM
-	 */
-	i = getenv_r ("pram", (char *)tmp, sizeof (tmp));
-	reg = (i > 0) ? simple_strtoul ((const char *)tmp, NULL, 10) : CONFIG_PRAM;
-	addr -= (reg << 10);		/* size is in kB */
-	debug ("Reserving %ldk for protected RAM at %08lx\n", reg, addr);
-#endif /* CONFIG_PRAM */
-
-	/* round down to next 4 kB limit */
-	addr &= ~(4096 - 1);
-	debug ("Top of RAM usable for U-Boot at: %08lx\n", addr);
-
-#ifdef CONFIG_LCD
-	/* reserve memory for LCD display (always full pages) */
-	addr = lcd_setmem (addr);
-	gd->fb_base = addr;
-#endif /* CONFIG_LCD */
-
-#if defined(CONFIG_VIDEO) && defined(CONFIG_8xx)
-	/* reserve memory for video display (always full pages) */
-	addr = video_setmem (addr);
-	gd->fb_base = addr;
-#endif /* CONFIG_VIDEO  */
-
-	/*
-	 * reserve memory for U-Boot code, data & bss
-	 * round down to next 4 kB limit
-	 */
-	addr -= len;
-	addr &= ~(4096 - 1);
-#ifdef CONFIG_E500
-	/* round down to next 64 kB limit so that IVPR stays aligned */
-	addr &= ~(65536 - 1);
-#endif
-
-	debug ("Reserving %ldk for U-Boot at: %08lx\n", len >> 10, addr);
-
-	/*
-	 * reserve memory for malloc() arena
-	 */
-	addr_sp = addr - TOTAL_MALLOC_LEN;
-	debug ("Reserving %dk for malloc() at: %08lx\n",
-			TOTAL_MALLOC_LEN >> 10, addr_sp);
-
-	/*
-	 * (permanently) allocate a Board Info struct
-	 * and a permanent copy of the "global" data
-	 */
-	addr_sp -= sizeof (bd_t);
-	bd = (bd_t *) addr_sp;
-	gd->bd = bd;
-	debug ("Reserving %zu Bytes for Board Info at: %08lx\n",
-			sizeof (bd_t), addr_sp);
-	addr_sp -= sizeof (gd_t);
-	id = (gd_t *) addr_sp;
-	debug ("Reserving %zu Bytes for Global Data at: %08lx\n",
-			sizeof (gd_t), addr_sp);
-
-	/*
-	 * Finally, we set up a new (bigger) stack.
-	 *
-	 * Leave some safety gap for SP, force alignment on 16 byte boundary
-	 * Clear initial stack frame
-	 */
-	addr_sp -= 16;
-	addr_sp &= ~0xF;
-	s = (ulong *)addr_sp;
-	*s-- = 0;
-	*s-- = 0;
-	addr_sp = (ulong)s;
-	debug ("Stack Pointer at: %08lx\n", addr_sp);
-
-	/*
-	 * Save local variables to board info struct
-	 */
-
-	bd->bi_memstart  = CONFIG_SYS_SDRAM_BASE;	/* start of  DRAM memory	*/
-	bd->bi_memsize   = gd->ram_size;	/* size  of  DRAM memory in bytes */
-
-#ifdef CONFIG_IP860
-	bd->bi_sramstart = SRAM_BASE;	/* start of  SRAM memory	*/
-	bd->bi_sramsize  = SRAM_SIZE;	/* size  of  SRAM memory	*/
-#elif defined CONFIG_MPC8220
-	bd->bi_sramstart = CONFIG_SYS_SRAM_BASE;	/* start of  SRAM memory	*/
-	bd->bi_sramsize  = CONFIG_SYS_SRAM_SIZE;	/* size  of  SRAM memory	*/
-#else
-	bd->bi_sramstart = 0;		/* FIXME */ /* start of  SRAM memory	*/
-	bd->bi_sramsize  = 0;		/* FIXME */ /* size  of  SRAM memory	*/
-#endif
-
-#if defined(CONFIG_8xx) || defined(CONFIG_8260) || defined(CONFIG_5xx) || \
-    defined(CONFIG_E500) || defined(CONFIG_MPC86xx)
-	bd->bi_immr_base = CONFIG_SYS_IMMR;	/* base  of IMMR register     */
-#endif
-#if defined(CONFIG_MPC5xxx)
-	bd->bi_mbar_base = CONFIG_SYS_MBAR;	/* base of internal registers */
-#endif
-#if defined(CONFIG_MPC83xx)
-	bd->bi_immrbar = CONFIG_SYS_IMMR;
-#endif
-#if defined(CONFIG_MPC8220)
-	bd->bi_mbar_base = CONFIG_SYS_MBAR;	/* base of internal registers */
-	bd->bi_inpfreq   = gd->inp_clk;
-	bd->bi_pcifreq   = gd->pci_clk;
-	bd->bi_vcofreq   = gd->vco_clk;
-	bd->bi_pevfreq   = gd->pev_clk;
-	bd->bi_flbfreq   = gd->flb_clk;
-
-	/* store bootparam to sram (backward compatible), here? */
-	{
-		u32 *sram = (u32 *)CONFIG_SYS_SRAM_BASE;
-		*sram++ = gd->ram_size;
-		*sram++ = gd->bus_clk;
-		*sram++ = gd->inp_clk;
-		*sram++ = gd->cpu_clk;
-		*sram++ = gd->vco_clk;
-		*sram++ = gd->flb_clk;
-		*sram++ = 0xb8c3ba11;  /* boot signature */
-	}
-#endif
-
-	bd->bi_bootflags = bootflag;	/* boot / reboot flag (for LynxOS)    */
-
-	WATCHDOG_RESET ();
-	bd->bi_intfreq = gd->cpu_clk;	/* Internal Freq, in Hz */
-	bd->bi_busfreq = gd->bus_clk;	/* Bus Freq,      in Hz */
-#if defined(CONFIG_CPM2)
-	bd->bi_cpmfreq = gd->cpm_clk;
-	bd->bi_brgfreq = gd->brg_clk;
-	bd->bi_sccfreq = gd->scc_clk;
-	bd->bi_vco     = gd->vco_out;
-#endif /* CONFIG_CPM2 */
-#if defined(CONFIG_MPC512X)
-	bd->bi_ipsfreq = gd->ips_clk;
-#endif /* CONFIG_MPC512X */
-#if defined(CONFIG_MPC5xxx)
-	bd->bi_ipbfreq = gd->ipb_clk;
-	bd->bi_pcifreq = gd->pci_clk;
-#endif /* CONFIG_MPC5xxx */
-	bd->bi_baudrate = gd->baudrate;	/* Console Baudrate     */
-
-#ifdef CONFIG_SYS_EXTBDINFO
-	strncpy ((char *)bd->bi_s_version, "1.2", sizeof (bd->bi_s_version));
-	strncpy ((char *)bd->bi_r_version, U_BOOT_VERSION, sizeof (bd->bi_r_version));
-
-	bd->bi_procfreq = gd->cpu_clk;	/* Processor Speed, In Hz */
-	bd->bi_plb_busfreq = gd->bus_clk;
-#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || \
-    defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
-    defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-	bd->bi_pci_busfreq = get_PCI_freq ();
-	bd->bi_opbfreq = get_OPB_freq ();
-#elif defined(CONFIG_XILINX_405)
-	bd->bi_pci_busfreq = get_PCI_freq ();
-#endif
-#endif
-
-	debug ("New Stack Pointer is: %08lx\n", addr_sp);
-
-	WATCHDOG_RESET ();
-
-#ifdef CONFIG_POST
-	post_bootmode_init();
-	post_run (NULL, POST_ROM | post_bootmode_get(0));
-#endif
-
-	WATCHDOG_RESET();
-
-	gd->relocaddr = addr; /* Record relocation address, useful for debug */
-
-	memcpy (id, (void *)gd, sizeof (gd_t));
-
-	relocate_code (addr_sp, id, addr);
-
-	/* NOTREACHED - relocate_code() does not return */
-}
-
-/************************************************************************
- *
- * This is the next part if the initialization sequence: we are now
- * running from RAM and have a "normal" C environment, i. e. global
- * data can be written, BSS has been cleared, the stack size in not
- * that critical any more, etc.
- *
- ************************************************************************
- */
-void board_init_r (gd_t *id, ulong dest_addr)
-{
-	char *s;
-	bd_t *bd;
-	ulong malloc_start;
-
-#ifndef CONFIG_SYS_NO_FLASH
-	ulong flash_size;
-#endif
-
-	gd = id;		/* initialize RAM version of global data */
-	bd = gd->bd;
-
-	gd->flags |= GD_FLG_RELOC;	/* tell others: relocation done */
-
-	/* The Malloc area is immediately below the monitor copy in DRAM */
-	malloc_start = dest_addr - TOTAL_MALLOC_LEN;
-
-#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
-	/*
-	 * The gd->cpu pointer is set to an address in flash before relocation.
-	 * We need to update it to point to the same CPU entry in RAM.
-	 */
-	gd->cpu += dest_addr - CONFIG_SYS_MONITOR_BASE;
-#endif
-
-#ifdef CONFIG_SERIAL_MULTI
-	serial_initialize();
-#endif
-
-	debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
-
-	WATCHDOG_RESET ();
-
-	/*
-	 * Setup trap handlers
-	 */
-	trap_init (dest_addr);
-
-#ifdef CONFIG_ADDR_MAP
-	init_addr_map();
-#endif
-
-#if defined(CONFIG_BOARD_EARLY_INIT_R)
-	board_early_init_r ();
-#endif
-
-	monitor_flash_len = (ulong)&__init_end - dest_addr;
-
-	WATCHDOG_RESET ();
-
-#ifdef CONFIG_LOGBUFFER
-	logbuff_init_ptrs ();
-#endif
-#ifdef CONFIG_POST
-	post_output_backlog ();
-#endif
-
-	WATCHDOG_RESET();
-
-#if defined(CONFIG_SYS_DELAYED_ICACHE) || defined(CONFIG_MPC83xx)
-	icache_enable ();	/* it's time to enable the instruction cache */
-#endif
-
-#if defined(CONFIG_SYS_INIT_RAM_LOCK) && defined(CONFIG_E500)
-	unlock_ram_in_cache();	/* it's time to unlock D-cache in e500 */
-#endif
-
-#if defined(CONFIG_BAB7xx) || defined(CONFIG_CPC45)
-	/*
-	 * Do PCI configuration on BAB7xx and CPC45 _before_ the flash
-	 * gets initialised, because we need the ISA resp. PCI_to_LOCAL bus
-	 * bridge there.
-	 */
-	pci_init ();
-#endif
-#if defined(CONFIG_BAB7xx)
-	/*
-	 * Initialise the ISA bridge
-	 */
-	initialise_w83c553f ();
-#endif
-
-	asm ("sync ; isync");
-
-	mem_malloc_init (malloc_start, TOTAL_MALLOC_LEN);
-
-#if !defined(CONFIG_SYS_NO_FLASH)
-	puts ("FLASH: ");
-
-	if ((flash_size = flash_init ()) > 0) {
-# ifdef CONFIG_SYS_FLASH_CHECKSUM
-		print_size (flash_size, "");
-		/*
-		 * Compute and print flash CRC if flashchecksum is set to 'y'
-		 *
-		 * NOTE: Maybe we should add some WATCHDOG_RESET()? XXX
-		 */
-		s = getenv ("flashchecksum");
-		if (s && (*s == 'y')) {
-			printf ("  CRC: %08X",
-				crc32 (0, (const unsigned char *) CONFIG_SYS_FLASH_BASE, flash_size)
-			);
-		}
-		putc ('\n');
-# else	/* !CONFIG_SYS_FLASH_CHECKSUM */
-		print_size (flash_size, "\n");
-# endif /* CONFIG_SYS_FLASH_CHECKSUM */
-	} else {
-		puts (failed);
-		hang ();
-	}
-
-	bd->bi_flashstart = CONFIG_SYS_FLASH_BASE;	/* update start of FLASH memory    */
-	bd->bi_flashsize = flash_size;	/* size of FLASH memory (final value) */
-
-#if defined(CONFIG_SYS_UPDATE_FLASH_SIZE)
-	/* Make a update of the Memctrl. */
-	update_flash_size (flash_size);
-#endif
-
-
-# if defined(CONFIG_PCU_E) || defined(CONFIG_OXC) || defined(CONFIG_RMU)
-	/* flash mapped at end of memory map */
-	bd->bi_flashoffset = TEXT_BASE + flash_size;
-# elif CONFIG_SYS_MONITOR_BASE == CONFIG_SYS_FLASH_BASE
-	bd->bi_flashoffset = monitor_flash_len;	/* reserved area for startup monitor  */
-# else
-	bd->bi_flashoffset = 0;
-# endif
-#else	/* CONFIG_SYS_NO_FLASH */
-
-	bd->bi_flashsize = 0;
-	bd->bi_flashstart = 0;
-	bd->bi_flashoffset = 0;
-#endif /* !CONFIG_SYS_NO_FLASH */
-
-	WATCHDOG_RESET ();
-
-	/* initialize higher level parts of CPU like time base and timers */
-	cpu_init_r ();
-
-	WATCHDOG_RESET ();
-
-#ifdef CONFIG_SPI
-# if !defined(CONFIG_ENV_IS_IN_EEPROM)
-	spi_init_f ();
-# endif
-	spi_init_r ();
-#endif
-
-#if defined(CONFIG_CMD_NAND)
-	WATCHDOG_RESET ();
-	puts ("NAND:  ");
-	nand_init();		/* go init the NAND */
-#endif
-
-	/* relocate environment function pointers etc. */
-	env_relocate ();
-
-	/*
-	 * Fill in missing fields of bd_info.
-	 * We do this here, where we have "normal" access to the
-	 * environment; we used to do this still running from ROM,
-	 * where had to use getenv_r(), which can be pretty slow when
-	 * the environment is in EEPROM.
-	 */
-
-#if defined(CONFIG_SYS_EXTBDINFO)
-#if defined(CONFIG_405GP) || defined(CONFIG_405EP)
-#if defined(CONFIG_I2CFAST)
-	/*
-	 * set bi_iic_fast for linux taking environment variable
-	 * "i2cfast" into account
-	 */
-	{
-		char *s = getenv ("i2cfast");
-		if (s && ((*s == 'y') || (*s == 'Y'))) {
-			bd->bi_iic_fast[0] = 1;
-			bd->bi_iic_fast[1] = 1;
-		} else {
-			bd->bi_iic_fast[0] = 0;
-			bd->bi_iic_fast[1] = 0;
-		}
-	}
-#else
-	bd->bi_iic_fast[0] = 0;
-	bd->bi_iic_fast[1] = 0;
-#endif	/* CONFIG_I2CFAST */
-#endif	/* CONFIG_405GP, CONFIG_405EP */
-#endif	/* CONFIG_SYS_EXTBDINFO */
-
-#if defined(CONFIG_SC3)
-	sc3_read_eeprom();
-#endif
-
-#if defined (CONFIG_ID_EEPROM) || defined (CONFIG_SYS_I2C_MAC_OFFSET)
-	mac_read_from_eeprom();
-#endif
-
-#ifdef	CONFIG_HERMES
-	if ((gd->board_type >> 16) == 2)
-		bd->bi_ethspeed = gd->board_type & 0xFFFF;
-	else
-		bd->bi_ethspeed = 0xFFFF;
-#endif
-
-#ifdef CONFIG_CMD_NET
-	/* kept around for legacy kernels only ... ignore the next section */
-	eth_getenv_enetaddr("ethaddr", bd->bi_enetaddr);
-#ifdef CONFIG_HAS_ETH1
-	eth_getenv_enetaddr("eth1addr", bd->bi_enet1addr);
-#endif
-#ifdef CONFIG_HAS_ETH2
-	eth_getenv_enetaddr("eth2addr", bd->bi_enet2addr);
-#endif
-#ifdef CONFIG_HAS_ETH3
-	eth_getenv_enetaddr("eth3addr", bd->bi_enet3addr);
-#endif
-#ifdef CONFIG_HAS_ETH4
-	eth_getenv_enetaddr("eth4addr", bd->bi_enet4addr);
-#endif
-#ifdef CONFIG_HAS_ETH5
-	eth_getenv_enetaddr("eth5addr", bd->bi_enet5addr);
-#endif
-#endif /* CONFIG_CMD_NET */
-
-	/* IP Address */
-	bd->bi_ip_addr = getenv_IPaddr ("ipaddr");
-
-	WATCHDOG_RESET ();
-
-#if defined(CONFIG_PCI) && !defined(CONFIG_BAB7xx) && !defined(CONFIG_CPC45)
-	/*
-	 * Do pci configuration
-	 */
-	pci_init ();
-#endif
-
-/** leave this here (after malloc(), environment and PCI are working) **/
-	/* Initialize stdio devices */
-	stdio_init ();
-
-	/* Initialize the jump table for applications */
-	jumptable_init ();
-
-#if defined(CONFIG_API)
-	/* Initialize API */
-	api_init ();
-#endif
-
-	/* Initialize the console (after the relocation and devices init) */
-	console_init_r ();
-
-#if defined(CONFIG_MISC_INIT_R)
-	/* miscellaneous platform dependent initialisations */
-	misc_init_r ();
-#endif
-
-#ifdef	CONFIG_HERMES
-	if (bd->bi_ethspeed != 0xFFFF)
-		hermes_start_lxt980 ((int) bd->bi_ethspeed);
-#endif
-
-#if defined(CONFIG_CMD_KGDB)
-	WATCHDOG_RESET ();
-	puts ("KGDB:  ");
-	kgdb_init ();
-#endif
-
-	debug ("U-Boot relocated to %08lx\n", dest_addr);
-
-	/*
-	 * Enable Interrupts
-	 */
-	interrupt_init ();
-
-	/* Must happen after interrupts are initialized since
-	 * an irq handler gets installed
-	 */
-#ifdef CONFIG_SERIAL_SOFTWARE_FIFO
-	serial_buffered_init();
-#endif
-
-#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT)
-	status_led_set (STATUS_LED_BOOT, STATUS_LED_BLINKING);
-#endif
-
-	udelay (20);
-
-	set_timer (0);
-
-	/* Initialize from environment */
-	if ((s = getenv ("loadaddr")) != NULL) {
-		load_addr = simple_strtoul (s, NULL, 16);
-	}
-#if defined(CONFIG_CMD_NET)
-	if ((s = getenv ("bootfile")) != NULL) {
-		copy_filename (BootFile, s, sizeof (BootFile));
-	}
-#endif
-
-	WATCHDOG_RESET ();
-
-#if defined(CONFIG_DTT)		/* Digital Thermometers and Thermostats */
-	dtt_init ();
-#endif
-#if defined(CONFIG_CMD_SCSI)
-	WATCHDOG_RESET ();
-	puts ("SCSI:  ");
-	scsi_init ();
-#endif
-
-#ifdef CONFIG_GENERIC_MMC
-	WATCHDOG_RESET ();
-	puts ("MMC:  ");
-	mmc_initialize (bd);
-#endif
-
-#if defined(CONFIG_CMD_DOC)
-	WATCHDOG_RESET ();
-	puts ("DOC:   ");
-	doc_init ();
-#endif
-
-#ifdef CONFIG_BITBANGMII
-	bb_miiphy_init();
-#endif
-#if defined(CONFIG_CMD_NET)
-#if defined(CONFIG_NET_MULTI)
-	WATCHDOG_RESET ();
-	puts ("Net:   ");
-#endif
-	eth_initialize (bd);
-#endif
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_RESET_PHY_R)
-	WATCHDOG_RESET ();
-	debug ("Reset Ethernet PHY\n");
-	reset_phy ();
-#endif
-
-#ifdef CONFIG_POST
-	post_run (NULL, POST_RAM | post_bootmode_get(0));
-#endif
-
-#if defined(CONFIG_CMD_PCMCIA) \
-    && !defined(CONFIG_CMD_IDE)
-	WATCHDOG_RESET ();
-	puts ("PCMCIA:");
-	pcmcia_init ();
-#endif
-
-#if defined(CONFIG_CMD_IDE)
-	WATCHDOG_RESET ();
-# ifdef	CONFIG_IDE_8xx_PCCARD
-	puts ("PCMCIA:");
-# else
-	puts ("IDE:   ");
-#endif
-#if defined(CONFIG_START_IDE)
-	if (board_start_ide())
-		ide_init ();
-#else
-	ide_init ();
-#endif
-#endif
-
-#ifdef CONFIG_LAST_STAGE_INIT
-	WATCHDOG_RESET ();
-	/*
-	 * Some parts can be only initialized if all others (like
-	 * Interrupts) are up and running (i.e. the PC-style ISA
-	 * keyboard).
-	 */
-	last_stage_init ();
-#endif
-
-#if defined(CONFIG_CMD_BEDBUG)
-	WATCHDOG_RESET ();
-	bedbug_init ();
-#endif
-
-#if defined(CONFIG_PRAM) || defined(CONFIG_LOGBUFFER)
-	/*
-	 * Export available size of memory for Linux,
-	 * taking into account the protected RAM at top of memory
-	 */
-	{
-		ulong pram;
-		uchar memsz[32];
-#ifdef CONFIG_PRAM
-		char *s;
-
-		if ((s = getenv ("pram")) != NULL) {
-			pram = simple_strtoul (s, NULL, 10);
-		} else {
-			pram = CONFIG_PRAM;
-		}
-#else
-		pram=0;
-#endif
-#ifdef CONFIG_LOGBUFFER
-#ifndef CONFIG_ALT_LB_ADDR
-		/* Also take the logbuffer into account (pram is in kB) */
-		pram += (LOGBUFF_LEN+LOGBUFF_OVERHEAD)/1024;
-#endif
-#endif
-		sprintf ((char *)memsz, "%ldk", (bd->bi_memsize / 1024) - pram);
-		setenv ("mem", (char *)memsz);
-	}
-#endif
-
-#ifdef CONFIG_PS2KBD
-	puts ("PS/2:  ");
-	kbd_init();
-#endif
-
-#ifdef CONFIG_MODEM_SUPPORT
- {
-	 extern int do_mdm_init;
-	 do_mdm_init = gd->do_mdm_init;
- }
-#endif
-
-	/* Initialization complete - start the monitor */
-
-	/* main_loop() can return to retry autoboot, if so just run it again. */
-	for (;;) {
-		WATCHDOG_RESET ();
-		main_loop ();
-	}
-
-	/* NOTREACHED - no way out of command loop except booting */
-}
-
-void hang (void)
-{
-	puts ("### ERROR ### Please RESET the board ###\n");
-	show_boot_progress(-30);
-	for (;;);
-}
-
-
-#if 0 /* We could use plain global data, but the resulting code is bigger */
-/*
- * Pointer to initial global data area
- *
- * Here we initialize it.
- */
-#undef	XTRN_DECLARE_GLOBAL_DATA_PTR
-#define XTRN_DECLARE_GLOBAL_DATA_PTR	/* empty = allocate here */
-DECLARE_GLOBAL_DATA_PTR = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
-#endif  /* 0 */
-
-/************************************************************************/