summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/cpu/armv7/Kconfig8
-rw-r--r--arch/arm/cpu/armv8/Kconfig2
-rw-r--r--board/sunxi/Kconfig16
-rw-r--r--drivers/power/Kconfig14
-rw-r--r--drivers/spmi/Kconfig4
5 files changed, 22 insertions, 22 deletions
diff --git a/arch/arm/cpu/armv7/Kconfig b/arch/arm/cpu/armv7/Kconfig
index bd6108eec0..41c6639c13 100644
--- a/arch/arm/cpu/armv7/Kconfig
+++ b/arch/arm/cpu/armv7/Kconfig
@@ -7,14 +7,14 @@ config CPU_V7_HAS_VIRT
bool
config ARMV7_NONSEC
- boolean "Enable support for booting in non-secure mode" if EXPERT
+ bool "Enable support for booting in non-secure mode" if EXPERT
depends on CPU_V7_HAS_NONSEC
default y
---help---
Say Y here to enable support for booting in non-secure / SVC mode.
config ARMV7_BOOT_SEC_DEFAULT
- boolean "Boot in secure mode by default" if EXPERT
+ bool "Boot in secure mode by default" if EXPERT
depends on ARMV7_NONSEC
default y if TEGRA
---help---
@@ -25,14 +25,14 @@ config ARMV7_BOOT_SEC_DEFAULT
variable to "sec" or "nonsec".
config ARMV7_VIRT
- boolean "Enable support for hardware virtualization" if EXPERT
+ bool "Enable support for hardware virtualization" if EXPERT
depends on CPU_V7_HAS_VIRT && ARMV7_NONSEC
default y
---help---
Say Y here to boot in hypervisor (HYP) mode when booting non-secure.
config ARMV7_LPAE
- boolean "Use LPAE page table format" if EXPERT
+ bool "Use LPAE page table format" if EXPERT
depends on CPU_V7
default n
---help---
diff --git a/arch/arm/cpu/armv8/Kconfig b/arch/arm/cpu/armv8/Kconfig
index acf2460ede..7e1fc4cbf9 100644
--- a/arch/arm/cpu/armv8/Kconfig
+++ b/arch/arm/cpu/armv8/Kconfig
@@ -1,7 +1,7 @@
if ARM64
config ARMV8_MULTIENTRY
- boolean "Enable multiple CPUs to enter into U-Boot"
+ bool "Enable multiple CPUs to enter into U-Boot"
config ARMV8_SPIN_TABLE
bool "Support spin-table enable method"
diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index 323e972932..1b30669230 100644
--- a/board/sunxi/Kconfig
+++ b/board/sunxi/Kconfig
@@ -249,7 +249,7 @@ config UART0_PORT_F
Only enable this if you really know what you are doing.
config OLD_SUNXI_KERNEL_COMPAT
- boolean "Enable workarounds for booting old kernels"
+ bool "Enable workarounds for booting old kernels"
default n
---help---
Set this to enable various workarounds for old kernels, this results in
@@ -419,13 +419,13 @@ config I2C4_ENABLE
endif
config AXP_GPIO
- boolean "Enable support for gpio-s on axp PMICs"
+ bool "Enable support for gpio-s on axp PMICs"
default n
---help---
Say Y here to enable support for the gpio pins of the axp PMIC ICs.
config VIDEO
- boolean "Enable graphical uboot console on HDMI, LCD or VGA"
+ bool "Enable graphical uboot console on HDMI, LCD or VGA"
depends on !MACH_SUN8I_A83T && !MACH_SUN8I_H3 && !MACH_SUN9I && !MACH_SUN50I_A64
default y
---help---
@@ -434,21 +434,21 @@ config VIDEO
info on how to select the video output and mode.
config VIDEO_HDMI
- boolean "HDMI output support"
+ bool "HDMI output support"
depends on VIDEO && !MACH_SUN8I
default y
---help---
Say Y here to add support for outputting video over HDMI.
config VIDEO_VGA
- boolean "VGA output support"
+ bool "VGA output support"
depends on VIDEO && (MACH_SUN4I || MACH_SUN7I)
default n
---help---
Say Y here to add support for outputting video over VGA.
config VIDEO_VGA_VIA_LCD
- boolean "VGA via LCD controller support"
+ bool "VGA via LCD controller support"
depends on VIDEO && (MACH_SUN5I || MACH_SUN6I || MACH_SUN8I)
default n
---help---
@@ -457,7 +457,7 @@ config VIDEO_VGA_VIA_LCD
Olimex A13 boards.
config VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH
- boolean "Force sync active high for VGA via LCD controller support"
+ bool "Force sync active high for VGA via LCD controller support"
depends on VIDEO_VGA_VIA_LCD
default n
---help---
@@ -475,7 +475,7 @@ config VIDEO_VGA_EXTERNAL_DAC_EN
format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
config VIDEO_COMPOSITE
- boolean "Composite video output support"
+ bool "Composite video output support"
depends on VIDEO && (MACH_SUN4I || MACH_SUN5I || MACH_SUN7I)
default n
---help---
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index b422703126..f2c5629be2 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -15,12 +15,12 @@ choice
default SUNXI_NO_PMIC if MACH_SUN8I_H3 || MACH_SUN50I
config SUNXI_NO_PMIC
- boolean "board without a pmic"
+ bool "board without a pmic"
---help---
Select this for boards which do not use a PMIC.
config AXP152_POWER
- boolean "axp152 pmic support"
+ bool "axp152 pmic support"
depends on MACH_SUN5I
select CMD_POWEROFF
---help---
@@ -28,7 +28,7 @@ config AXP152_POWER
A10s boards.
config AXP209_POWER
- boolean "axp209 pmic support"
+ bool "axp209 pmic support"
depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I
select CMD_POWEROFF
---help---
@@ -36,7 +36,7 @@ config AXP209_POWER
A10, A13 and A20 boards.
config AXP221_POWER
- boolean "axp221 / axp223 pmic support"
+ bool "axp221 / axp223 pmic support"
depends on MACH_SUN6I || MACH_SUN8I_A23 || MACH_SUN8I_A33
select CMD_POWEROFF
---help---
@@ -44,14 +44,14 @@ config AXP221_POWER
A23 and A31 boards.
config AXP809_POWER
- boolean "axp809 pmic support"
+ bool "axp809 pmic support"
depends on MACH_SUN9I
select CMD_POWEROFF
---help---
Say y here to enable support for the axp809 pmic found on A80 boards.
config AXP818_POWER
- boolean "axp818 pmic support"
+ bool "axp818 pmic support"
depends on MACH_SUN8I_A83T
select CMD_POWEROFF
---help---
@@ -59,7 +59,7 @@ config AXP818_POWER
A83T dev board.
config SY8106A_POWER
- boolean "SY8106A pmic support"
+ bool "SY8106A pmic support"
depends on MACH_SUN8I_H3
---help---
Select this to enable support for the SY8106A pmic found on some
diff --git a/drivers/spmi/Kconfig b/drivers/spmi/Kconfig
index 8d25b457a6..ab4878ebae 100644
--- a/drivers/spmi/Kconfig
+++ b/drivers/spmi/Kconfig
@@ -9,13 +9,13 @@ config SPMI
to connect PMIC devices on various SoCs.
config SPMI_MSM
- boolean "Support Qualcomm SPMI bus"
+ bool "Support Qualcomm SPMI bus"
depends on SPMI
---help---
Support SPMI bus implementation found on Qualcomm Snapdragon SoCs.
config SPMI_SANDBOX
- boolean "Support for Sandbox SPMI bus"
+ bool "Support for Sandbox SPMI bus"
depends on SPMI
---help---
Demo SPMI bus implementation. Emulates part of PM8916 as single