diff options
| -rw-r--r-- | Kconfig | 9 | ||||
| -rw-r--r-- | Makefile | 2 | ||||
| -rw-r--r-- | arch/x86/Kconfig | 1 | ||||
| -rw-r--r-- | arch/x86/cpu/baytrail/fsp_configs.c | 117 | ||||
| -rw-r--r-- | arch/x86/cpu/baytrail/valleyview.c | 22 | ||||
| -rw-r--r-- | arch/x86/include/asm/arch-baytrail/fsp/azalia.h | 39 | ||||
| -rw-r--r-- | arch/x86/include/asm/arch-baytrail/fsp/fsp_vpd.h | 2 | ||||
| -rw-r--r-- | arch/x86/include/asm/arch-braswell/fsp/fsp_vpd.h | 26 | ||||
| -rw-r--r-- | arch/x86/include/asm/fsp/fsp_azalia.h | 39 | ||||
| -rw-r--r-- | arch/x86/include/asm/fsp/fsp_support.h | 1 | ||||
| -rw-r--r-- | board/advantech/som-db5800-som-6867/som-db5800-som-6867.c | 111 | ||||
| -rw-r--r-- | configs/conga-qeval20-qa3-e3845-internal-uart_defconfig | 1 | ||||
| -rw-r--r-- | configs/minnowmax_defconfig | 1 | ||||
| -rw-r--r-- | configs/qemu-x86_64_defconfig | 1 | ||||
| -rw-r--r-- | configs/qemu-x86_defconfig | 1 | ||||
| -rw-r--r-- | doc/README.x86 | 12 |
16 files changed, 206 insertions, 179 deletions
@@ -158,6 +158,15 @@ config PHYS_64BIT This can be used not only for 64bit SoCs, but also for large physical address extention on 32bit SoCs. +config BUILD_ROM + bool "Build U-Boot as BIOS replacement" + depends on X86 + help + This option allows to build a ROM version of U-Boot. + The build process generally requires several binary blobs + which are not shipped in the U-Boot source tree. + Please, see doc/README.x86 for details. + endmenu # General setup menu "Boot images" @@ -796,7 +796,7 @@ ALL-$(CONFIG_REMAKE_ELF) += u-boot.elf ALL-$(CONFIG_EFI_APP) += u-boot-app.efi ALL-$(CONFIG_EFI_STUB) += u-boot-payload.efi -ifneq ($(BUILD_ROM),) +ifneq ($(BUILD_ROM)$(CONFIG_BUILD_ROM),) ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom endif diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 38a618753a..c869ae2548 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -677,7 +677,6 @@ config HAVE_ACPI_RESUME config S3_VGA_ROM_RUN bool "Re-run VGA option ROMs on S3 resume" depends on HAVE_ACPI_RESUME - default y if HAVE_ACPI_RESUME help Execute VGA option ROMs in U-Boot when resuming from S3. Normally this is needed when graphics console is being used in the kernel. diff --git a/arch/x86/cpu/baytrail/fsp_configs.c b/arch/x86/cpu/baytrail/fsp_configs.c index 45f9bf95da..6b762e581a 100644 --- a/arch/x86/cpu/baytrail/fsp_configs.c +++ b/arch/x86/cpu/baytrail/fsp_configs.c @@ -8,117 +8,20 @@ #include <common.h> #include <fdtdec.h> -#include <asm/arch/fsp/azalia.h> #include <asm/fsp/fsp_support.h> DECLARE_GLOBAL_DATA_PTR; -/* ALC262 Verb Table - 10EC0262 */ -static const uint32_t verb_table_data13[] = { - /* Pin Complex (NID 0x11) */ - 0x01171cf0, - 0x01171d11, - 0x01171e11, - 0x01171f41, - /* Pin Complex (NID 0x12) */ - 0x01271cf0, - 0x01271d11, - 0x01271e11, - 0x01271f41, - /* Pin Complex (NID 0x14) */ - 0x01471c10, - 0x01471d40, - 0x01471e01, - 0x01471f01, - /* Pin Complex (NID 0x15) */ - 0x01571cf0, - 0x01571d11, - 0x01571e11, - 0x01571f41, - /* Pin Complex (NID 0x16) */ - 0x01671cf0, - 0x01671d11, - 0x01671e11, - 0x01671f41, - /* Pin Complex (NID 0x18) */ - 0x01871c20, - 0x01871d98, - 0x01871ea1, - 0x01871f01, - /* Pin Complex (NID 0x19) */ - 0x01971c21, - 0x01971d98, - 0x01971ea1, - 0x01971f02, - /* Pin Complex (NID 0x1A) */ - 0x01a71c2f, - 0x01a71d30, - 0x01a71e81, - 0x01a71f01, - /* Pin Complex */ - 0x01b71c1f, - 0x01b71d40, - 0x01b71e21, - 0x01b71f02, - /* Pin Complex */ - 0x01c71cf0, - 0x01c71d11, - 0x01c71e11, - 0x01c71f41, - /* Pin Complex */ - 0x01d71c01, - 0x01d71dc6, - 0x01d71e14, - 0x01d71f40, - /* Pin Complex */ - 0x01e71cf0, - 0x01e71d11, - 0x01e71e11, - 0x01e71f41, - /* Pin Complex */ - 0x01f71cf0, - 0x01f71d11, - 0x01f71e11, - 0x01f71f41, -}; - -/* - * This needs to be in ROM since if we put it in CAR, FSP init loses it when - * it drops CAR. - * - * TODO(sjg@chromium.org): Move to device tree when FSP allows it +/** + * Override the FSP's Azalia configuration data * - * VerbTable: (RealTek ALC262) - * Revision ID = 0xFF, support all steps - * Codec Verb Table For AZALIA - * Codec Address: CAd value (0/1/2) - * Codec Vendor: 0x10EC0262 + * @azalia: pointer to be updated to point to a ROM address where Azalia + * configuration data is stored */ -static const struct pch_azalia_verb_table azalia_verb_table[] = { - { - { - 0x10ec0262, - 0x0000, - 0xff, - 0x01, - 0x000b, - 0x0002, - }, - verb_table_data13 - } -}; - -const struct pch_azalia_config azalia_config = { - .pme_enable = 1, - .docking_supported = 1, - .docking_attached = 0, - .hdmi_codec_enable = 1, - .azalia_v_ci_enable = 1, - .rsvdbits = 0, - .azalia_verb_table_num = 1, - .azalia_verb_table = azalia_verb_table, - .reset_wait_timer_us = 300 -}; +__weak void update_fsp_azalia_configs(struct azalia_config **azalia) +{ + *azalia = NULL; +} /** * Override the FSP's configuration data. @@ -138,8 +41,6 @@ void update_fsp_configs(struct fsp_config_data *config, rt_buf->common.boot_mode = config->common.boot_mode; rt_buf->common.upd_data = &config->fsp_upd; - fsp_upd->azalia_config_ptr = (uint32_t)&azalia_config; - node = fdtdec_next_compatible(blob, 0, COMPAT_INTEL_BAYTRAIL_FSP); if (node < 0) { debug("%s: Cannot find FSP node\n", __func__); @@ -174,6 +75,8 @@ void update_fsp_configs(struct fsp_config_data *config, SATA_MODE_AHCI); fsp_upd->enable_azalia = fdtdec_get_bool(blob, node, "fsp,enable-azalia"); + if (fsp_upd->enable_azalia) + update_fsp_azalia_configs(&fsp_upd->azalia_cfg_ptr); fsp_upd->enable_xhci = fdtdec_get_bool(blob, node, "fsp,enable-xhci"); fsp_upd->lpe_mode = fdtdec_get_int(blob, node, "fsp,lpe-mode", LPE_MODE_PCI); diff --git a/arch/x86/cpu/baytrail/valleyview.c b/arch/x86/cpu/baytrail/valleyview.c index c58f6a86a8..9af1bdabbd 100644 --- a/arch/x86/cpu/baytrail/valleyview.c +++ b/arch/x86/cpu/baytrail/valleyview.c @@ -10,6 +10,13 @@ #include <asm/irq.h> #include <asm/mrccache.h> #include <asm/post.h> +#include <asm/arch/iomap.h> + +/* GPIO SUS */ +#define GPIO_SUS_PAD_BASE (IO_BASE_ADDRESS + IO_BASE_OFFSET_GPSSUS) +#define GPIO_SUS_DFX5_CONF0 0x150 +#define BYT_TRIG_LVL BIT(24) +#define BYT_TRIG_POS BIT(25) #ifndef CONFIG_EFI_APP int arch_cpu_init(void) @@ -33,6 +40,21 @@ int arch_misc_init(void) mrccache_save(); #endif + /* + * For some unknown reason, FSP (gold4) for BayTrail configures + * the GPIO DFX5 PAD to enable level interrupt (bit 24 and 25). + * This does not cause any issue when Linux kernel runs w/ or w/o + * the pinctrl driver for BayTrail. However this causes unstable + * S3 resume if the pinctrl driver is included in the kernel build. + * As this pin keeps generating interrupts during an S3 resume, + * and there is no IRQ requester in the kernel to handle it, the + * kernel seems to hang and does not continue resuming. + * + * Clear the mysterious interrupt bits for this pin. + */ + clrbits_le32(GPIO_SUS_PAD_BASE + GPIO_SUS_DFX5_CONF0, + BYT_TRIG_LVL | BYT_TRIG_POS); + return 0; } diff --git a/arch/x86/include/asm/arch-baytrail/fsp/azalia.h b/arch/x86/include/asm/arch-baytrail/fsp/azalia.h deleted file mode 100644 index d96a20fc8d..0000000000 --- a/arch/x86/include/asm/arch-baytrail/fsp/azalia.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * Copyright (C) 2013, Intel Corporation - * Copyright (C) 2015 Google, Inc - * - * SPDX-License-Identifier: Intel - */ - -#ifndef _FSP_AZALIA_H_ -#define _FSP_AZALIA_H_ - -struct __packed pch_azalia_verb_table_header { - uint32_t vendor_device_id; - uint16_t sub_system_id; - uint8_t revision_id; /* 0xff applies to all steppings */ - uint8_t front_panel_support; - uint16_t number_of_rear_jacks; - uint16_t number_of_front_jacks; -}; - -struct __packed pch_azalia_verb_table { - struct pch_azalia_verb_table_header verb_table_header; - const uint32_t *verb_table_data; -}; - -struct __packed pch_azalia_config { - uint8_t pme_enable:1; - uint8_t docking_supported:1; - uint8_t docking_attached:1; - uint8_t hdmi_codec_enable:1; - uint8_t azalia_v_ci_enable:1; - uint8_t rsvdbits:3; - /* number of verb tables provided by platform */ - uint8_t azalia_verb_table_num; - const struct pch_azalia_verb_table *azalia_verb_table; - /* delay timer after azalia reset */ - uint16_t reset_wait_timer_us; -}; - -#endif diff --git a/arch/x86/include/asm/arch-baytrail/fsp/fsp_vpd.h b/arch/x86/include/asm/arch-baytrail/fsp/fsp_vpd.h index 8c07b3747f..e2f0e39046 100644 --- a/arch/x86/include/asm/arch-baytrail/fsp/fsp_vpd.h +++ b/arch/x86/include/asm/arch-baytrail/fsp/fsp_vpd.h @@ -45,7 +45,7 @@ struct __packed upd_region { uint8_t enable_sata; /* Offset 0x002d */ uint8_t sata_mode; /* Offset 0x002e */ uint8_t enable_azalia; /* Offset 0x002f */ - uint32_t azalia_config_ptr; /* Offset 0x0030 */ + struct azalia_config *azalia_cfg_ptr; /* Offset 0x0030 */ uint8_t enable_xhci; /* Offset 0x0034 */ uint8_t lpe_mode; /* Offset 0x0035 */ uint8_t lpss_sio_mode; /* Offset 0x0036 */ diff --git a/arch/x86/include/asm/arch-braswell/fsp/fsp_vpd.h b/arch/x86/include/asm/arch-braswell/fsp/fsp_vpd.h index ecb01facd4..99c4c0aaca 100644 --- a/arch/x86/include/asm/arch-braswell/fsp/fsp_vpd.h +++ b/arch/x86/include/asm/arch-braswell/fsp/fsp_vpd.h @@ -29,32 +29,6 @@ struct __packed memory_upd { u8 reserved[189]; /* Offset 0x0043 */ }; -struct __packed azalia_verb_table_header { - u32 vendor_device_id; - u16 sub_system_id; - u8 revision_id; - u8 front_panel_support; - u16 number_of_rear_jacks; - u16 number_of_front_jacks; -}; - -struct __packed azalia_verb_table { - struct azalia_verb_table_header header; - u32 *data; -}; - -struct __packed azalia_config { - u8 pme_enable:1; - u8 docking_supported:1; - u8 docking_attached:1; - u8 hdmi_codec_enable:1; - u8 azalia_v_ci_enable:1; - u8 reserved:3; - u8 verb_table_num; - struct azalia_verb_table *verb_table; - u16 reset_wait_timer_ms; -}; - struct gpio_family { u32 confg; u32 confg_changes; diff --git a/arch/x86/include/asm/fsp/fsp_azalia.h b/arch/x86/include/asm/fsp/fsp_azalia.h new file mode 100644 index 0000000000..a1467bf991 --- /dev/null +++ b/arch/x86/include/asm/fsp/fsp_azalia.h @@ -0,0 +1,39 @@ +/* + * Copyright (C) 2013, Intel Corporation + * Copyright (C) 2015, Google, Inc + * + * SPDX-License-Identifier: Intel + */ + +#ifndef _FSP_AZALIA_H_ +#define _FSP_AZALIA_H_ + +struct __packed azalia_verb_table_header { + u32 vendor_device_id; + u16 sub_system_id; + u8 revision_id; /* 0xff applies to all steppings */ + u8 front_panel_support; + u16 number_of_rear_jacks; + u16 number_of_front_jacks; +}; + +struct __packed azalia_verb_table { + struct azalia_verb_table_header header; + const u32 *data; +}; + +struct __packed azalia_config { + u8 pme_enable:1; + u8 docking_supported:1; + u8 docking_attached:1; + u8 hdmi_codec_enable:1; + u8 azalia_v_ci_enable:1; + u8 rsvdbits:3; + /* number of verb tables provided by platform */ + u8 verb_table_num; + const struct azalia_verb_table *verb_table; + /* delay timer after azalia reset */ + u16 reset_wait_timer_ms; +}; + +#endif diff --git a/arch/x86/include/asm/fsp/fsp_support.h b/arch/x86/include/asm/fsp/fsp_support.h index 97a50b0a73..df3add008c 100644 --- a/arch/x86/include/asm/fsp/fsp_support.h +++ b/arch/x86/include/asm/fsp/fsp_support.h @@ -15,6 +15,7 @@ #include "fsp_hob.h" #include "fsp_infoheader.h" #include "fsp_bootmode.h" +#include "fsp_azalia.h" #include <asm/arch/fsp/fsp_vpd.h> #include <asm/arch/fsp/fsp_configs.h> diff --git a/board/advantech/som-db5800-som-6867/som-db5800-som-6867.c b/board/advantech/som-db5800-som-6867/som-db5800-som-6867.c index 615879575c..202e987539 100644 --- a/board/advantech/som-db5800-som-6867/som-db5800-som-6867.c +++ b/board/advantech/som-db5800-som-6867/som-db5800-som-6867.c @@ -6,6 +6,117 @@ */ #include <common.h> +#include <asm/fsp/fsp_support.h> + +/* ALC262 Verb Table - 10EC0262 */ +static const u32 verb_table_data13[] = { + /* Pin Complex (NID 0x11) */ + 0x01171cf0, + 0x01171d11, + 0x01171e11, + 0x01171f41, + /* Pin Complex (NID 0x12) */ + 0x01271cf0, + 0x01271d11, + 0x01271e11, + 0x01271f41, + /* Pin Complex (NID 0x14) */ + 0x01471c10, + 0x01471d40, + 0x01471e01, + 0x01471f01, + /* Pin Complex (NID 0x15) */ + 0x01571cf0, + 0x01571d11, + 0x01571e11, + 0x01571f41, + /* Pin Complex (NID 0x16) */ + 0x01671cf0, + 0x01671d11, + 0x01671e11, + 0x01671f41, + /* Pin Complex (NID 0x18) */ + 0x01871c20, + 0x01871d98, + 0x01871ea1, + 0x01871f01, + /* Pin Complex (NID 0x19) */ + 0x01971c21, + 0x01971d98, + 0x01971ea1, + 0x01971f02, + /* Pin Complex (NID 0x1A) */ + 0x01a71c2f, + 0x01a71d30, + 0x01a71e81, + 0x01a71f01, + /* Pin Complex */ + 0x01b71c1f, + 0x01b71d40, + 0x01b71e21, + 0x01b71f02, + /* Pin Complex */ + 0x01c71cf0, + 0x01c71d11, + 0x01c71e11, + 0x01c71f41, + /* Pin Complex */ + 0x01d71c01, + 0x01d71dc6, + 0x01d71e14, + 0x01d71f40, + /* Pin Complex */ + 0x01e71cf0, + 0x01e71d11, + 0x01e71e11, + 0x01e71f41, + /* Pin Complex */ + 0x01f71cf0, + 0x01f71d11, + 0x01f71e11, + 0x01f71f41, +}; + +/* + * This needs to be in ROM since if we put it in CAR, FSP init loses it when + * it drops CAR. + * + * VerbTable: (RealTek ALC262) + * Revision ID = 0xFF, support all steps + * Codec Verb Table For AZALIA + * Codec Address: CAd value (0/1/2) + * Codec Vendor: 0x10EC0262 + */ +static const struct azalia_verb_table azalia_verb_table[] = { + { + { + 0x10ec0262, + 0x0000, + 0xff, + 0x01, + 0x000b, + 0x0002, + }, + verb_table_data13 + } +}; + +static const struct azalia_config azalia_config = { + .pme_enable = 1, + .docking_supported = 1, + .docking_attached = 0, + .hdmi_codec_enable = 1, + .azalia_v_ci_enable = 1, + .rsvdbits = 0, + .verb_table_num = 1, + .verb_table = azalia_verb_table, + .reset_wait_timer_ms = 300 +}; + +void update_fsp_azalia_configs(const struct azalia_config **azalia) +{ + *azalia = &azalia_config; +} int board_early_init_f(void) { diff --git a/configs/conga-qeval20-qa3-e3845-internal-uart_defconfig b/configs/conga-qeval20-qa3-e3845-internal-uart_defconfig index 971cfc66e8..59bde05c80 100644 --- a/configs/conga-qeval20-qa3-e3845-internal-uart_defconfig +++ b/configs/conga-qeval20-qa3-e3845-internal-uart_defconfig @@ -9,6 +9,7 @@ CONFIG_HAVE_VGA_BIOS=y CONFIG_GENERATE_PIRQ_TABLE=y CONFIG_GENERATE_MP_TABLE=y CONFIG_GENERATE_ACPI_TABLE=y +CONFIG_HAVE_ACPI_RESUME=y CONFIG_SEABIOS=y CONFIG_FIT=y CONFIG_FIT_SIGNATURE=y diff --git a/configs/minnowmax_defconfig b/configs/minnowmax_defconfig index fc2564cd7d..d1332d369d 100644 --- a/configs/minnowmax_defconfig +++ b/configs/minnowmax_defconfig @@ -6,6 +6,7 @@ CONFIG_INTERNAL_UART=y CONFIG_DEBUG_UART=y CONFIG_SMP=y CONFIG_HAVE_VGA_BIOS=y +CONFIG_VGA_BIOS_ADDR=0xfffb0000 CONFIG_GENERATE_PIRQ_TABLE=y CONFIG_GENERATE_MP_TABLE=y CONFIG_GENERATE_ACPI_TABLE=y diff --git a/configs/qemu-x86_64_defconfig b/configs/qemu-x86_64_defconfig index fae4a9ca54..0cea3694d0 100644 --- a/configs/qemu-x86_64_defconfig +++ b/configs/qemu-x86_64_defconfig @@ -14,6 +14,7 @@ CONFIG_SMP=y CONFIG_GENERATE_PIRQ_TABLE=y CONFIG_GENERATE_MP_TABLE=y CONFIG_GENERATE_ACPI_TABLE=y +CONFIG_BUILD_ROM=y CONFIG_FIT=y CONFIG_SPL_LOAD_FIT=y CONFIG_BOOTSTAGE=y diff --git a/configs/qemu-x86_defconfig b/configs/qemu-x86_defconfig index ffdb4c34c1..bf7fbc723d 100644 --- a/configs/qemu-x86_defconfig +++ b/configs/qemu-x86_defconfig @@ -5,6 +5,7 @@ CONFIG_SMP=y CONFIG_GENERATE_PIRQ_TABLE=y CONFIG_GENERATE_MP_TABLE=y CONFIG_GENERATE_ACPI_TABLE=y +CONFIG_BUILD_ROM=y CONFIG_FIT=y CONFIG_BOOTSTAGE=y CONFIG_BOOTSTAGE_REPORT=y diff --git a/doc/README.x86 b/doc/README.x86 index c96a22cb08..772e8d2a86 100644 --- a/doc/README.x86 +++ b/doc/README.x86 @@ -80,11 +80,15 @@ Building a ROM version of U-Boot (hereafter referred to as u-boot.rom) is a little bit tricky, as generally it requires several binary blobs which are not shipped in the U-Boot source tree. Due to this reason, the u-boot.rom build is not turned on by default in the U-Boot source tree. Firstly, you need turn it -on by enabling the ROM build: +on by enabling the ROM build either via an environment variable -$ export BUILD_ROM=y + $ export BUILD_ROM=y -This tells the Makefile to build u-boot.rom as a target. +or via configuration + + CONFIG_BUILD_ROM=y + +Both tell the Makefile to build u-boot.rom as a target. --- @@ -320,7 +324,7 @@ Offset Description Controlling config 6ef000 Environment CONFIG_ENV_OFFSET 6f0000 MRC cache CONFIG_ENABLE_MRC_CACHE 700000 u-boot-dtb.bin CONFIG_SYS_TEXT_BASE -790000 vga.bin CONFIG_VGA_BIOS_ADDR +7b0000 vga.bin CONFIG_VGA_BIOS_ADDR 7c0000 fsp.bin CONFIG_FSP_ADDR 7f8000 <spare> (depends on size of fsp.bin) 7ff800 U-Boot 16-bit boot CONFIG_SYS_X86_START16 |