diff options
40 files changed, 66 insertions, 114 deletions
diff --git a/common/Kconfig b/common/Kconfig index 8c8d2e4832..746dd84f05 100644 --- a/common/Kconfig +++ b/common/Kconfig @@ -255,33 +255,10 @@ config ENV_IS_IN_EEPROM config ENV_IS_IN_FAT bool "Environment is in a FAT filesystem" depends on !CHAIN_OF_TRUST + select FAT_WRITE help Define this if you want to use the FAT file system for the environment. - - FAT_ENV_INTERFACE: - - Define this to a string that is the name of the block device. - - - FAT_ENV_DEVICE_AND_PART: - - Define this to a string to specify the partition of the device. It can - be as following: - - "D:P", "D:0", "D", "D:" or "D:auto" (D, P are integers. And P >= 1) - - "D:P": device D partition P. Error occurs if device D has no - partition table. - - "D:0": device D. - - "D" or "D:": device D partition 1 if device D has partition - table, or the whole device D if has no partition - table. - - "D:auto": first partition in device D with bootable flag set. - If none, first valid partition in device D. If no - partition table then means device D. - - - FAT_ENV_FILE: - - It's a string of the FAT file name. This file use to store the - environment. - CONFIG_FAT_WRITE: This must be enabled. Otherwise it cannot save the environment file. @@ -570,6 +547,42 @@ config ENV_IS_NOWHERE Define this if you don't want to or can't have an environment stored on a storage medium +config ENV_FAT_INTERFACE + string "Name of the block device for the environment" + depends on ENV_IS_IN_FAT + default "mmc" if TI_COMMON_CMD_OPTIONS || ARCH_ZYNQMP || ARCH_AT91 + help + Define this to a string that is the name of the block device. + +config ENV_FAT_DEVICE_AND_PART + string "Device and partition for where to store the environemt in FAT" + depends on ENV_IS_IN_FAT + default "0:1" if TI_COMMON_CMD_OPTIONS + default "0:auto" if ARCH_ZYNQMP + default "0" if ARCH_AT91 + help + Define this to a string to specify the partition of the device. It can + be as following: + + "D:P", "D:0", "D", "D:" or "D:auto" (D, P are integers. And P >= 1) + - "D:P": device D partition P. Error occurs if device D has no + partition table. + - "D:0": device D. + - "D" or "D:": device D partition 1 if device D has partition + table, or the whole device D if has no partition + table. + - "D:auto": first partition in device D with bootable flag set. + If none, first valid partition in device D. If no + partition table then means device D. + +config ENV_FAT_FILE + string "Name of the FAT file to use for the environemnt" + depends on ENV_IS_IN_FAT + default "uboot.env" + help + It's a string of the FAT file name. This file use to store the + environment. + if ARCH_SUNXI config ENV_OFFSET diff --git a/common/env_fat.c b/common/env_fat.c index 75616d4c5b..b51c920cd4 100644 --- a/common/env_fat.c +++ b/common/env_fat.c @@ -48,8 +48,8 @@ int saveenv(void) if (err) return err; - part = blk_get_device_part_str(FAT_ENV_INTERFACE, - FAT_ENV_DEVICE_AND_PART, + part = blk_get_device_part_str(CONFIG_ENV_FAT_INTERFACE, + CONFIG_ENV_FAT_DEVICE_AND_PART, &dev_desc, &info, 1); if (part < 0) return 1; @@ -57,15 +57,15 @@ int saveenv(void) dev = dev_desc->devnum; if (fat_set_blk_dev(dev_desc, &info) != 0) { printf("\n** Unable to use %s %d:%d for saveenv **\n", - FAT_ENV_INTERFACE, dev, part); + CONFIG_ENV_FAT_INTERFACE, dev, part); return 1; } - err = file_fat_write(FAT_ENV_FILE, (void *)&env_new, 0, sizeof(env_t), + err = file_fat_write(CONFIG_ENV_FAT_FILE, (void *)&env_new, 0, sizeof(env_t), &size); if (err == -1) { printf("\n** Unable to write \"%s\" from %s%d:%d **\n", - FAT_ENV_FILE, FAT_ENV_INTERFACE, dev, part); + CONFIG_ENV_FAT_FILE, CONFIG_ENV_FAT_INTERFACE, dev, part); return 1; } @@ -82,8 +82,8 @@ void env_relocate_spec(void) int dev, part; int err; - part = blk_get_device_part_str(FAT_ENV_INTERFACE, - FAT_ENV_DEVICE_AND_PART, + part = blk_get_device_part_str(CONFIG_ENV_FAT_INTERFACE, + CONFIG_ENV_FAT_DEVICE_AND_PART, &dev_desc, &info, 1); if (part < 0) goto err_env_relocate; @@ -91,14 +91,14 @@ void env_relocate_spec(void) dev = dev_desc->devnum; if (fat_set_blk_dev(dev_desc, &info) != 0) { printf("\n** Unable to use %s %d:%d for loading the env **\n", - FAT_ENV_INTERFACE, dev, part); + CONFIG_ENV_FAT_INTERFACE, dev, part); goto err_env_relocate; } - err = file_fat_read(FAT_ENV_FILE, buf, CONFIG_ENV_SIZE); + err = file_fat_read(CONFIG_ENV_FAT_FILE, buf, CONFIG_ENV_SIZE); if (err == -1) { printf("\n** Unable to read \"%s\" from %s%d:%d **\n", - FAT_ENV_FILE, FAT_ENV_INTERFACE, dev, part); + CONFIG_ENV_FAT_FILE, CONFIG_ENV_FAT_INTERFACE, dev, part); goto err_env_relocate; } diff --git a/configs/am335x_evm_nor_defconfig b/configs/am335x_evm_nor_defconfig index 49040a695c..17b9f42f9a 100644 --- a/configs/am335x_evm_nor_defconfig +++ b/configs/am335x_evm_nor_defconfig @@ -1,5 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_OMAP2PLUS=y +CONFIG_TI_COMMON_CMD_OPTIONS=y CONFIG_AM33XX=y CONFIG_NOR=y CONFIG_SPL_STACK_R_ADDR=0x82000000 @@ -50,7 +51,6 @@ CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_G_DNL_MANUFACTURER="Texas Instruments" CONFIG_G_DNL_VENDOR_NUM=0x0451 CONFIG_G_DNL_PRODUCT_NUM=0xd022 -CONFIG_FAT_WRITE=y CONFIG_LZO=y CONFIG_OF_LIBFDT=y CONFIG_OF_LIBFDT_OVERLAY=y diff --git a/configs/at91sam9m10g45ek_mmc_defconfig b/configs/at91sam9m10g45ek_mmc_defconfig index ed9e9c20b9..144a344d74 100644 --- a/configs/at91sam9m10g45ek_mmc_defconfig +++ b/configs/at91sam9m10g45ek_mmc_defconfig @@ -50,4 +50,3 @@ CONFIG_DM_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_LCD=y -CONFIG_FAT_WRITE=y diff --git a/configs/at91sam9n12ek_mmc_defconfig b/configs/at91sam9n12ek_mmc_defconfig index 16e9c4cec2..6e05cf1f8f 100644 --- a/configs/at91sam9n12ek_mmc_defconfig +++ b/configs/at91sam9n12ek_mmc_defconfig @@ -50,4 +50,3 @@ CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_STORAGE=y CONFIG_LCD=y -CONFIG_FAT_WRITE=y diff --git a/configs/at91sam9rlek_mmc_defconfig b/configs/at91sam9rlek_mmc_defconfig index 69ff8e6236..6171f1d80c 100644 --- a/configs/at91sam9rlek_mmc_defconfig +++ b/configs/at91sam9rlek_mmc_defconfig @@ -43,4 +43,3 @@ CONFIG_DEBUG_UART_BOARD_INIT=y CONFIG_DEBUG_UART_ANNOUNCE=y CONFIG_ATMEL_USART=y CONFIG_LCD=y -CONFIG_FAT_WRITE=y diff --git a/configs/at91sam9x5ek_mmc_defconfig b/configs/at91sam9x5ek_mmc_defconfig index 1b76127934..c4b4541c22 100644 --- a/configs/at91sam9x5ek_mmc_defconfig +++ b/configs/at91sam9x5ek_mmc_defconfig @@ -55,4 +55,3 @@ CONFIG_DM_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_LCD=y -CONFIG_FAT_WRITE=y diff --git a/configs/axs101_defconfig b/configs/axs101_defconfig index 4e5f2e5fc8..f85c142388 100644 --- a/configs/axs101_defconfig +++ b/configs/axs101_defconfig @@ -4,6 +4,8 @@ CONFIG_SYS_TEXT_BASE=0x81000000 CONFIG_SYS_CLK_FREQ=750000000 CONFIG_DEFAULT_DEVICE_TREE="axs101" CONFIG_ENV_IS_IN_FAT=y +CONFIG_ENV_FAT_INTERFACE="mmc" +CONFIG_ENV_FAT_DEVICE_AND_PART="0:1" CONFIG_BOOTDELAY=3 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SYS_PROMPT="AXS# " diff --git a/configs/axs103_defconfig b/configs/axs103_defconfig index ff0bf19303..68301ef5f7 100644 --- a/configs/axs103_defconfig +++ b/configs/axs103_defconfig @@ -4,6 +4,8 @@ CONFIG_SYS_TEXT_BASE=0x81000000 CONFIG_SYS_CLK_FREQ=100000000 CONFIG_DEFAULT_DEVICE_TREE="axs103" CONFIG_ENV_IS_IN_FAT=y +CONFIG_ENV_FAT_INTERFACE="mmc" +CONFIG_ENV_FAT_DEVICE_AND_PART="0:1" CONFIG_BOOTDELAY=3 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SYS_PROMPT="AXS# " diff --git a/configs/hikey_defconfig b/configs/hikey_defconfig index 6df04de281..be6ff3d549 100644 --- a/configs/hikey_defconfig +++ b/configs/hikey_defconfig @@ -4,6 +4,8 @@ CONFIG_IDENT_STRING="hikey" CONFIG_DEFAULT_DEVICE_TREE="hi6220-hikey" CONFIG_DISTRO_DEFAULTS=y CONFIG_ENV_IS_IN_FAT=y +CONFIG_ENV_FAT_INTERFACE="mmc" +CONFIG_ENV_FAT_DEVICE_AND_PART="1:1" # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_BOARD_EARLY_INIT_F=y @@ -18,5 +20,4 @@ CONFIG_MMC_DW_K3=y CONFIG_USB=y CONFIG_USB_DWC2=y CONFIG_USB_STORAGE=y -CONFIG_FAT_WRITE=y CONFIG_OF_LIBFDT_OVERLAY=y diff --git a/configs/hsdk_defconfig b/configs/hsdk_defconfig index eb3dfbd570..57c34f8281 100644 --- a/configs/hsdk_defconfig +++ b/configs/hsdk_defconfig @@ -5,6 +5,8 @@ CONFIG_SYS_TEXT_BASE=0x81000000 CONFIG_SYS_CLK_FREQ=1000000000 CONFIG_DEFAULT_DEVICE_TREE="hsdk" CONFIG_ENV_IS_IN_FAT=y +CONFIG_ENV_FAT_INTERFACE="mmc" +CONFIG_ENV_FAT_DEVICE_AND_PART="0:1" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SYS_PROMPT="hsdk# " # CONFIG_CMD_IMLS is not set diff --git a/configs/omap4_panda_defconfig b/configs/omap4_panda_defconfig index 22fe337ba2..b9503440d4 100644 --- a/configs/omap4_panda_defconfig +++ b/configs/omap4_panda_defconfig @@ -5,6 +5,8 @@ CONFIG_TARGET_OMAP4_PANDA=y # CONFIG_SPL_NAND_SUPPORT is not set CONFIG_DISTRO_DEFAULTS=y CONFIG_ENV_IS_IN_FAT=y +CONFIG_ENV_FAT_INTERFACE="mmc" +CONFIG_ENV_FAT_DEVICE_AND_PART="0:1" CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_VERSION_VARIABLE=y @@ -28,5 +30,4 @@ CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y -CONFIG_FAT_WRITE=y CONFIG_OF_LIBFDT=y diff --git a/configs/picosam9g45_defconfig b/configs/picosam9g45_defconfig index 326158d506..28872ac5da 100644 --- a/configs/picosam9g45_defconfig +++ b/configs/picosam9g45_defconfig @@ -36,5 +36,4 @@ CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_LCD=y -CONFIG_FAT_WRITE=y CONFIG_OF_LIBFDT=y diff --git a/configs/rpi_2_defconfig b/configs/rpi_2_defconfig index a6f3cd7965..e0bf3e14e0 100644 --- a/configs/rpi_2_defconfig +++ b/configs/rpi_2_defconfig @@ -4,6 +4,8 @@ CONFIG_TARGET_RPI_2=y CONFIG_DEFAULT_DEVICE_TREE="bcm2836-rpi-2-b" CONFIG_DISTRO_DEFAULTS=y CONFIG_OF_BOARD_SETUP=y +CONFIG_ENV_FAT_INTERFACE="mmc" +CONFIG_ENV_FAT_DEVICE_AND_PART="0:1" # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/rpi_3_32b_defconfig b/configs/rpi_3_32b_defconfig index 1cbbb2c357..0b7be9e17e 100644 --- a/configs/rpi_3_32b_defconfig +++ b/configs/rpi_3_32b_defconfig @@ -5,6 +5,8 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_DEFAULT_DEVICE_TREE="bcm2837-rpi-3-b" CONFIG_DISTRO_DEFAULTS=y CONFIG_OF_BOARD_SETUP=y +CONFIG_ENV_FAT_INTERFACE="mmc" +CONFIG_ENV_FAT_DEVICE_AND_PART="0:1" # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/rpi_3_defconfig b/configs/rpi_3_defconfig index 80e6681332..dd7dc56ff4 100644 --- a/configs/rpi_3_defconfig +++ b/configs/rpi_3_defconfig @@ -5,6 +5,8 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_DEFAULT_DEVICE_TREE="bcm2837-rpi-3-b" CONFIG_DISTRO_DEFAULTS=y CONFIG_OF_BOARD_SETUP=y +CONFIG_ENV_FAT_INTERFACE="mmc" +CONFIG_ENV_FAT_DEVICE_AND_PART="0:1" # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/rpi_defconfig b/configs/rpi_defconfig index 5d344fdc87..8f23158899 100644 --- a/configs/rpi_defconfig +++ b/configs/rpi_defconfig @@ -4,6 +4,8 @@ CONFIG_TARGET_RPI=y CONFIG_DEFAULT_DEVICE_TREE="bcm2835-rpi-b" CONFIG_DISTRO_DEFAULTS=y CONFIG_OF_BOARD_SETUP=y +CONFIG_ENV_FAT_INTERFACE="mmc" +CONFIG_ENV_FAT_DEVICE_AND_PART="0:1" # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/sama5d2_xplained_mmc_defconfig b/configs/sama5d2_xplained_mmc_defconfig index e9a65ccb9d..f69cb56574 100644 --- a/configs/sama5d2_xplained_mmc_defconfig +++ b/configs/sama5d2_xplained_mmc_defconfig @@ -75,4 +75,3 @@ CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_ATMEL_USBA=y -CONFIG_FAT_WRITE=y diff --git a/configs/sama5d36ek_cmp_mmc_defconfig b/configs/sama5d36ek_cmp_mmc_defconfig index d99baad0f6..9264108a7d 100644 --- a/configs/sama5d36ek_cmp_mmc_defconfig +++ b/configs/sama5d36ek_cmp_mmc_defconfig @@ -50,4 +50,3 @@ CONFIG_ATMEL_USART=y CONFIG_DM_SPI=y CONFIG_ATMEL_SPI=y CONFIG_LCD=y -CONFIG_FAT_WRITE=y diff --git a/configs/sama5d3_xplained_mmc_defconfig b/configs/sama5d3_xplained_mmc_defconfig index acd74994c4..a7f5768e2c 100644 --- a/configs/sama5d3_xplained_mmc_defconfig +++ b/configs/sama5d3_xplained_mmc_defconfig @@ -66,4 +66,3 @@ CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y -CONFIG_FAT_WRITE=y diff --git a/configs/sama5d3xek_mmc_defconfig b/configs/sama5d3xek_mmc_defconfig index 1836e5392f..8b442d579e 100644 --- a/configs/sama5d3xek_mmc_defconfig +++ b/configs/sama5d3xek_mmc_defconfig @@ -75,4 +75,3 @@ CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_ATMEL_USBA=y CONFIG_LCD=y -CONFIG_FAT_WRITE=y diff --git a/configs/sama5d4_xplained_mmc_defconfig b/configs/sama5d4_xplained_mmc_defconfig index 094e5e1c2d..0d2fe89abd 100644 --- a/configs/sama5d4_xplained_mmc_defconfig +++ b/configs/sama5d4_xplained_mmc_defconfig @@ -69,4 +69,3 @@ CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_ATMEL_USBA=y -CONFIG_FAT_WRITE=y diff --git a/configs/sama5d4ek_mmc_defconfig b/configs/sama5d4ek_mmc_defconfig index a3909a0639..a1d13e6aeb 100644 --- a/configs/sama5d4ek_mmc_defconfig +++ b/configs/sama5d4ek_mmc_defconfig @@ -73,4 +73,3 @@ CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_ATMEL_USBA=y CONFIG_LCD=y -CONFIG_FAT_WRITE=y diff --git a/include/config_fallbacks.h b/include/config_fallbacks.h index d1411f0550..961a83d758 100644 --- a/include/config_fallbacks.h +++ b/include/config_fallbacks.h @@ -33,10 +33,6 @@ #define CONFIG_FS_FAT #endif -#if defined(CONFIG_ENV_IS_IN_FAT) && !defined(CONFIG_FAT_WRITE) -#define CONFIG_FAT_WRITE -#endif - #if (defined(CONFIG_CMD_EXT4) || defined(CONFIG_CMD_EXT2)) && \ !defined(CONFIG_FS_EXT4) #define CONFIG_FS_EXT4 diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index c7329cce9c..2a2e2ba0a9 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -351,11 +351,6 @@ #define CONFIG_ENV_OFFSET 0x001c0000 #define CONFIG_ENV_OFFSET_REDUND 0x001e0000 #define CONFIG_SYS_ENV_SECT_SIZE CONFIG_SYS_NAND_BLOCK_SIZE -#elif !defined(CONFIG_ENV_IS_NOWHERE) -/* Not NAND, SPI, NOR or eMMC env, so put ENV in a file on FAT */ -#define FAT_ENV_INTERFACE "mmc" -#define FAT_ENV_DEVICE_AND_PART "0:1" -#define FAT_ENV_FILE "uboot.env" #endif /* SPI flash. */ diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h index 70e7473ee8..44691676da 100644 --- a/include/configs/am43xx_evm.h +++ b/include/configs/am43xx_evm.h @@ -71,10 +71,6 @@ /* NS16550 Configuration */ #define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */ -#define FAT_ENV_INTERFACE "mmc" -#define FAT_ENV_DEVICE_AND_PART "0:1" -#define FAT_ENV_FILE "uboot.env" - #define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" /* SPL USB Support */ diff --git a/include/configs/at91-sama5_common.h b/include/configs/at91-sama5_common.h index b4135235d4..95df724fa3 100644 --- a/include/configs/at91-sama5_common.h +++ b/include/configs/at91-sama5_common.h @@ -53,9 +53,6 @@ #define CONFIG_SYS_MMC_ENV_DEV 0 #else /* u-boot env in sd/mmc card */ -#define FAT_ENV_INTERFACE "mmc" -#define FAT_ENV_DEVICE_AND_PART "0" -#define FAT_ENV_FILE "uboot.env" #define CONFIG_ENV_SIZE 0x4000 #endif diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h index 8b00370cdd..45a6a9a134 100644 --- a/include/configs/at91sam9m10g45ek.h +++ b/include/configs/at91sam9m10g45ek.h @@ -105,14 +105,6 @@ "root=/dev/mtdblock7 rw rootfstype=jffs2" #elif CONFIG_SYS_USE_MMC /* bootstrap + u-boot + env + linux in mmc */ -#define FAT_ENV_INTERFACE "mmc" -/* - * We don't specify the part number, if device 0 has partition table, it means - * the first partition; it no partition table, then take whole device as a - * FAT file system. - */ -#define FAT_ENV_DEVICE_AND_PART "0" -#define FAT_ENV_FILE "uboot.env" #define CONFIG_ENV_SIZE 0x4000 #define CONFIG_BOOTARGS "console=ttyS0,115200 " \ diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h index e4ff019967..975cfd9ed6 100644 --- a/include/configs/at91sam9n12ek.h +++ b/include/configs/at91sam9n12ek.h @@ -156,9 +156,6 @@ #define CONFIG_SYS_MMC_ENV_DEV 0 #else /* Use file in FAT file to save environment */ -#define FAT_ENV_INTERFACE "mmc" -#define FAT_ENV_FILE "uboot.env" -#define FAT_ENV_DEVICE_AND_PART "0" #define CONFIG_ENV_SIZE 0x4000 #endif diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h index 6132076e82..1192e8bb78 100644 --- a/include/configs/at91sam9rlek.h +++ b/include/configs/at91sam9rlek.h @@ -124,9 +124,6 @@ #else /* CONFIG_SYS_USE_MMC */ /* bootstrap + u-boot + env + linux in mmc */ -#define FAT_ENV_INTERFACE "mmc" -#define FAT_ENV_FILE "uboot.env" -#define FAT_ENV_DEVICE_AND_PART "0" #define CONFIG_ENV_SIZE 0x4000 #define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x21000000 at91sam9rlek.dtb; " \ "fatload mmc 0:1 0x22000000 zImage; " \ diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h index 7e8a9e921a..14575fac03 100644 --- a/include/configs/at91sam9x5ek.h +++ b/include/configs/at91sam9x5ek.h @@ -139,9 +139,6 @@ "bootm 0x22000000" #else /* CONFIG_SYS_USE_MMC */ /* bootstrap + u-boot + env + linux in mmc */ -#define FAT_ENV_INTERFACE "mmc" -#define FAT_ENV_FILE "uboot.env" -#define FAT_ENV_DEVICE_AND_PART "0" #define CONFIG_ENV_SIZE 0x4000 #endif diff --git a/include/configs/axs10x.h b/include/configs/axs10x.h index b583267b3e..b3ec64a5bc 100644 --- a/include/configs/axs10x.h +++ b/include/configs/axs10x.h @@ -76,10 +76,6 @@ * Environment settings */ #define CONFIG_ENV_SIZE SZ_16K -#define FAT_ENV_INTERFACE "mmc" -#define FAT_ENV_DEVICE_AND_PART "0:1" -#define FAT_ENV_FILE "uboot.env" -#define CONFIG_FAT_WRITE /* * Environment configuration diff --git a/include/configs/hikey.h b/include/configs/hikey.h index 8b2d012309..093badb88b 100644 --- a/include/configs/hikey.h +++ b/include/configs/hikey.h @@ -106,9 +106,6 @@ /* Preserve environment on sd card */ #define CONFIG_ENV_SIZE 0x1000 -#define FAT_ENV_INTERFACE "mmc" -#define FAT_ENV_DEVICE_AND_PART "1:1" -#define FAT_ENV_FILE "uboot.env" #define CONFIG_ENV_VARS_UBOOT_CONFIG /* Monitor Command Prompt */ diff --git a/include/configs/hsdk.h b/include/configs/hsdk.h index 68900ac980..32f649dd34 100644 --- a/include/configs/hsdk.h +++ b/include/configs/hsdk.h @@ -60,10 +60,6 @@ * Environment settings */ #define CONFIG_ENV_SIZE SZ_16K -#define FAT_ENV_INTERFACE "mmc" -#define FAT_ENV_DEVICE_AND_PART "0:1" -#define FAT_ENV_FILE "uboot.env" -#define CONFIG_FAT_WRITE /* * Environment configuration diff --git a/include/configs/k2g_evm.h b/include/configs/k2g_evm.h index 1117e5e5dd..7a201b0361 100644 --- a/include/configs/k2g_evm.h +++ b/include/configs/k2g_evm.h @@ -88,9 +88,6 @@ #define PHY_ANEG_TIMEOUT 10000 /* PHY needs longer aneg time */ #define CONFIG_ENV_SIZE (256 << 10) /* 256 KiB */ -#define FAT_ENV_INTERFACE "mmc" -#define FAT_ENV_DEVICE_AND_PART "0:1" -#define FAT_ENV_FILE "uboot.env" #define CONFIG_SF_DEFAULT_BUS 1 #define CONFIG_SF_DEFAULT_CS 0 diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h index 9951980836..7dfc446215 100644 --- a/include/configs/omap4_panda.h +++ b/include/configs/omap4_panda.h @@ -33,9 +33,6 @@ /* ENV related config options */ #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG -#define FAT_ENV_INTERFACE "mmc" -#define FAT_ENV_DEVICE_AND_PART "0:1" -#define FAT_ENV_FILE "uboot.env" #define CONFIG_ENV_OVERWRITE #endif /* __CONFIG_PANDA_H */ diff --git a/include/configs/picosam9g45.h b/include/configs/picosam9g45.h index a14739f282..4e64eac422 100644 --- a/include/configs/picosam9g45.h +++ b/include/configs/picosam9g45.h @@ -104,14 +104,6 @@ #ifdef CONFIG_SYS_USE_MMC /* bootstrap + u-boot + env + linux in mmc */ -#define FAT_ENV_INTERFACE "mmc" -/* - * We don't specify the part number, if device 0 has partition table, it means - * the first partition; it no partition table, then take whole device as a - * FAT file system. - */ -#define FAT_ENV_DEVICE_AND_PART "0" -#define FAT_ENV_FILE "uboot.env" #define CONFIG_ENV_SIZE 0x4000 #define CONFIG_BOOTARGS "console=ttyS0,115200 " \ diff --git a/include/configs/rpi.h b/include/configs/rpi.h index c545f99838..8ae4019d52 100644 --- a/include/configs/rpi.h +++ b/include/configs/rpi.h @@ -92,9 +92,6 @@ /* Environment */ #define CONFIG_ENV_SIZE SZ_16K -#define FAT_ENV_INTERFACE "mmc" -#define FAT_ENV_DEVICE_AND_PART "0:1" -#define FAT_ENV_FILE "uboot.env" #define CONFIG_ENV_VARS_UBOOT_CONFIG #define CONFIG_SYS_LOAD_ADDR 0x1000000 #define CONFIG_PREBOOT "usb start" diff --git a/include/configs/sama5d2_xplained.h b/include/configs/sama5d2_xplained.h index 42fb1e11d0..e4fb0fbef2 100644 --- a/include/configs/sama5d2_xplained.h +++ b/include/configs/sama5d2_xplained.h @@ -57,10 +57,8 @@ #ifdef CONFIG_SYS_USE_MMC /* bootstrap + u-boot + env in sd card */ -#undef FAT_ENV_DEVICE_AND_PART #undef CONFIG_BOOTCOMMAND -#define FAT_ENV_DEVICE_AND_PART "1" #define CONFIG_BOOTCOMMAND "fatload mmc 1:1 0x21000000 at91-sama5d2_xplained.dtb; " \ "fatload mmc 1:1 0x22000000 zImage; " \ "bootz 0x22000000 - 0x21000000" diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h index 7c5ec1924d..b73502b346 100644 --- a/include/configs/xilinx_zynqmp.h +++ b/include/configs/xilinx_zynqmp.h @@ -73,9 +73,6 @@ # ifndef CONFIG_ZYNQ_SDHCI_MAX_FREQ # define CONFIG_ZYNQ_SDHCI_MAX_FREQ 200000000 # endif -# define FAT_ENV_DEVICE_AND_PART "0:auto" -# define FAT_ENV_FILE "uboot.env" -# define FAT_ENV_INTERFACE "mmc" #endif #ifdef CONFIG_NAND_ARASAN |