diff options
Diffstat (limited to 'arch/arm/cpu/armv7/socfpga/clock_manager.c')
| -rw-r--r-- | arch/arm/cpu/armv7/socfpga/clock_manager.c | 340 |
1 files changed, 263 insertions, 77 deletions
diff --git a/arch/arm/cpu/armv7/socfpga/clock_manager.c b/arch/arm/cpu/armv7/socfpga/clock_manager.c index 158501acba..d869f47c88 100644 --- a/arch/arm/cpu/armv7/socfpga/clock_manager.c +++ b/arch/arm/cpu/armv7/socfpga/clock_manager.c @@ -8,38 +8,28 @@ #include <asm/io.h> #include <asm/arch/clock_manager.h> +DECLARE_GLOBAL_DATA_PTR; + static const struct socfpga_clock_manager *clock_manager_base = - (void *)SOCFPGA_CLKMGR_ADDRESS; - -#define CLKMGR_BYPASS_ENABLE 1 -#define CLKMGR_BYPASS_DISABLE 0 -#define CLKMGR_STAT_IDLE 0 -#define CLKMGR_STAT_BUSY 1 -#define CLKMGR_BYPASS_PERPLLSRC_SELECT_EOSC1 0 -#define CLKMGR_BYPASS_PERPLLSRC_SELECT_INPUT_MUX 1 -#define CLKMGR_BYPASS_SDRPLLSRC_SELECT_EOSC1 0 -#define CLKMGR_BYPASS_SDRPLLSRC_SELECT_INPUT_MUX 1 - -#define CLEAR_BGP_EN_PWRDN \ - (CLKMGR_MAINPLLGRP_VCO_PWRDN_SET(0)| \ - CLKMGR_MAINPLLGRP_VCO_EN_SET(0)| \ - CLKMGR_MAINPLLGRP_VCO_BGPWRDN_SET(0)) - -#define VCO_EN_BASE \ - (CLKMGR_MAINPLLGRP_VCO_PWRDN_SET(0)| \ - CLKMGR_MAINPLLGRP_VCO_EN_SET(1)| \ - CLKMGR_MAINPLLGRP_VCO_BGPWRDN_SET(0)) - -static inline void cm_wait_for_lock(uint32_t mask) + (struct socfpga_clock_manager *)SOCFPGA_CLKMGR_ADDRESS; + +static void cm_wait_for_lock(uint32_t mask) { register uint32_t inter_val; + uint32_t retry = 0; do { inter_val = readl(&clock_manager_base->inter) & mask; - } while (inter_val != mask); + if (inter_val == mask) + retry++; + else + retry = 0; + if (retry >= 10) + break; + } while (1); } /* function to poll in the fsm busy bit */ -static inline void cm_wait_for_fsm(void) +static void cm_wait_for_fsm(void) { while (readl(&clock_manager_base->stat) & CLKMGR_STAT_BUSY) ; @@ -49,22 +39,22 @@ static inline void cm_wait_for_fsm(void) * function to write the bypass register which requires a poll of the * busy bit */ -static inline void cm_write_bypass(uint32_t val) +static void cm_write_bypass(uint32_t val) { writel(val, &clock_manager_base->bypass); cm_wait_for_fsm(); } /* function to write the ctrl register which requires a poll of the busy bit */ -static inline void cm_write_ctrl(uint32_t val) +static void cm_write_ctrl(uint32_t val) { writel(val, &clock_manager_base->ctrl); cm_wait_for_fsm(); } /* function to write a clock register that has phase information */ -static inline void cm_write_with_phase(uint32_t value, - uint32_t reg_address, uint32_t mask) +static void cm_write_with_phase(uint32_t value, + uint32_t reg_address, uint32_t mask) { /* poll until phase is zero */ while (readl(reg_address) & mask) @@ -128,24 +118,18 @@ void cm_basic_init(const cm_config_t *cfg) writel(0, &clock_manager_base->per_pll.en); /* Put all plls in bypass */ - cm_write_bypass( - CLKMGR_BYPASS_PERPLLSRC_SET( - CLKMGR_BYPASS_PERPLLSRC_SELECT_EOSC1) | - CLKMGR_BYPASS_SDRPLLSRC_SET( - CLKMGR_BYPASS_SDRPLLSRC_SELECT_EOSC1) | - CLKMGR_BYPASS_PERPLL_SET(CLKMGR_BYPASS_ENABLE) | - CLKMGR_BYPASS_SDRPLL_SET(CLKMGR_BYPASS_ENABLE) | - CLKMGR_BYPASS_MAINPLL_SET(CLKMGR_BYPASS_ENABLE)); + cm_write_bypass(CLKMGR_BYPASS_PERPLL | CLKMGR_BYPASS_SDRPLL | + CLKMGR_BYPASS_MAINPLL); - /* - * Put all plls VCO registers back to reset value. - * Some code might have messed with them. - */ - writel(CLKMGR_MAINPLLGRP_VCO_RESET_VALUE, + /* Put all plls VCO registers back to reset value. */ + writel(CLKMGR_MAINPLLGRP_VCO_RESET_VALUE & + ~CLKMGR_MAINPLLGRP_VCO_REGEXTSEL_MASK, &clock_manager_base->main_pll.vco); - writel(CLKMGR_PERPLLGRP_VCO_RESET_VALUE, + writel(CLKMGR_PERPLLGRP_VCO_RESET_VALUE & + ~CLKMGR_PERPLLGRP_VCO_REGEXTSEL_MASK, &clock_manager_base->per_pll.vco); - writel(CLKMGR_SDRPLLGRP_VCO_RESET_VALUE, + writel(CLKMGR_SDRPLLGRP_VCO_RESET_VALUE & + ~CLKMGR_SDRPLLGRP_VCO_REGEXTSEL_MASK, &clock_manager_base->sdr_pll.vco); /* @@ -170,19 +154,9 @@ void cm_basic_init(const cm_config_t *cfg) * We made sure bgpwr down was assert for 5 us. Now deassert BG PWR DN * with numerator and denominator. */ - writel(cfg->main_vco_base | CLEAR_BGP_EN_PWRDN | - CLKMGR_MAINPLLGRP_VCO_REGEXTSEL_MASK, - &clock_manager_base->main_pll.vco); - - writel(cfg->peri_vco_base | CLEAR_BGP_EN_PWRDN | - CLKMGR_PERPLLGRP_VCO_REGEXTSEL_MASK, - &clock_manager_base->per_pll.vco); - - writel(CLKMGR_SDRPLLGRP_VCO_OUTRESET_SET(0) | - CLKMGR_SDRPLLGRP_VCO_OUTRESETALL_SET(0) | - cfg->sdram_vco_base | CLEAR_BGP_EN_PWRDN | - CLKMGR_SDRPLLGRP_VCO_REGEXTSEL_MASK, - &clock_manager_base->sdr_pll.vco); + writel(cfg->main_vco_base, &clock_manager_base->main_pll.vco); + writel(cfg->peri_vco_base, &clock_manager_base->per_pll.vco); + writel(cfg->sdram_vco_base, &clock_manager_base->sdr_pll.vco); /* * Time starts here @@ -217,6 +191,9 @@ void cm_basic_init(const cm_config_t *cfg) writel(cfg->perqspiclk, &clock_manager_base->per_pll.perqspiclk); /* Peri pernandsdmmcclk */ + writel(cfg->mainnandsdmmcclk, + &clock_manager_base->main_pll.mainnandsdmmcclk); + writel(cfg->pernandsdmmcclk, &clock_manager_base->per_pll.pernandsdmmcclk); @@ -232,18 +209,16 @@ void cm_basic_init(const cm_config_t *cfg) /* Enable vco */ /* main pll vco */ - writel(cfg->main_vco_base | VCO_EN_BASE, + writel(cfg->main_vco_base | CLKMGR_MAINPLLGRP_VCO_EN, &clock_manager_base->main_pll.vco); /* periferal pll */ - writel(cfg->peri_vco_base | VCO_EN_BASE, + writel(cfg->peri_vco_base | CLKMGR_MAINPLLGRP_VCO_EN, &clock_manager_base->per_pll.vco); /* sdram pll vco */ - writel(CLKMGR_SDRPLLGRP_VCO_OUTRESET_SET(0) | - CLKMGR_SDRPLLGRP_VCO_OUTRESETALL_SET(0) | - cfg->sdram_vco_base | VCO_EN_BASE, - &clock_manager_base->sdr_pll.vco); + writel(cfg->sdram_vco_base | CLKMGR_MAINPLLGRP_VCO_EN, + &clock_manager_base->sdr_pll.vco); /* L3 MP and L3 SP */ writel(cfg->maindiv, &clock_manager_base->main_pll.maindiv); @@ -294,8 +269,8 @@ void cm_basic_init(const cm_config_t *cfg) &clock_manager_base->per_pll.vco); /* assert sdram outresetall */ - writel(cfg->sdram_vco_base | VCO_EN_BASE| - CLKMGR_SDRPLLGRP_VCO_OUTRESETALL_SET(1), + writel(cfg->sdram_vco_base | CLKMGR_MAINPLLGRP_VCO_EN| + CLKMGR_SDRPLLGRP_VCO_OUTRESETALL, &clock_manager_base->sdr_pll.vco); /* deassert main outresetall */ @@ -307,9 +282,8 @@ void cm_basic_init(const cm_config_t *cfg) &clock_manager_base->per_pll.vco); /* deassert sdram outresetall */ - writel(CLKMGR_SDRPLLGRP_VCO_OUTRESETALL_SET(0) | - cfg->sdram_vco_base | VCO_EN_BASE, - &clock_manager_base->sdr_pll.vco); + writel(cfg->sdram_vco_base | CLKMGR_MAINPLLGRP_VCO_EN, + &clock_manager_base->sdr_pll.vco); /* * now that we've toggled outreset all, all the clocks @@ -333,18 +307,10 @@ void cm_basic_init(const cm_config_t *cfg) CLKMGR_SDRPLLGRP_S2FUSER2CLK_PHASE_MASK); /* Take all three PLLs out of bypass when safe mode is cleared. */ - cm_write_bypass( - CLKMGR_BYPASS_PERPLLSRC_SET( - CLKMGR_BYPASS_PERPLLSRC_SELECT_EOSC1) | - CLKMGR_BYPASS_SDRPLLSRC_SET( - CLKMGR_BYPASS_SDRPLLSRC_SELECT_EOSC1) | - CLKMGR_BYPASS_PERPLL_SET(CLKMGR_BYPASS_DISABLE) | - CLKMGR_BYPASS_SDRPLL_SET(CLKMGR_BYPASS_DISABLE) | - CLKMGR_BYPASS_MAINPLL_SET(CLKMGR_BYPASS_DISABLE)); + cm_write_bypass(0); /* clear safe mode */ - cm_write_ctrl(readl(&clock_manager_base->ctrl) | - CLKMGR_CTRL_SAFEMODE_SET(CLKMGR_CTRL_SAFEMODE_MASK)); + cm_write_ctrl(readl(&clock_manager_base->ctrl) | CLKMGR_CTRL_SAFEMODE); /* * now that safe mode is clear with clocks gated @@ -357,4 +323,224 @@ void cm_basic_init(const cm_config_t *cfg) writel(~0, &clock_manager_base->main_pll.en); writel(~0, &clock_manager_base->per_pll.en); writel(~0, &clock_manager_base->sdr_pll.en); + + /* Clear the loss of lock bits (write 1 to clear) */ + writel(CLKMGR_INTER_SDRPLLLOST_MASK | CLKMGR_INTER_PERPLLLOST_MASK | + CLKMGR_INTER_MAINPLLLOST_MASK, + &clock_manager_base->inter); +} + +static unsigned int cm_get_main_vco_clk_hz(void) +{ + uint32_t reg, clock; + + /* get the main VCO clock */ + reg = readl(&clock_manager_base->main_pll.vco); + clock = CONFIG_HPS_CLK_OSC1_HZ; + clock /= ((reg & CLKMGR_MAINPLLGRP_VCO_DENOM_MASK) >> + CLKMGR_MAINPLLGRP_VCO_DENOM_OFFSET) + 1; + clock *= ((reg & CLKMGR_MAINPLLGRP_VCO_NUMER_MASK) >> + CLKMGR_MAINPLLGRP_VCO_NUMER_OFFSET) + 1; + + return clock; +} + +static unsigned int cm_get_per_vco_clk_hz(void) +{ + uint32_t reg, clock = 0; + + /* identify PER PLL clock source */ + reg = readl(&clock_manager_base->per_pll.vco); + reg = (reg & CLKMGR_PERPLLGRP_VCO_SSRC_MASK) >> + CLKMGR_PERPLLGRP_VCO_SSRC_OFFSET; + if (reg == CLKMGR_VCO_SSRC_EOSC1) + clock = CONFIG_HPS_CLK_OSC1_HZ; + else if (reg == CLKMGR_VCO_SSRC_EOSC2) + clock = CONFIG_HPS_CLK_OSC2_HZ; + else if (reg == CLKMGR_VCO_SSRC_F2S) + clock = CONFIG_HPS_CLK_F2S_PER_REF_HZ; + + /* get the PER VCO clock */ + reg = readl(&clock_manager_base->per_pll.vco); + clock /= ((reg & CLKMGR_PERPLLGRP_VCO_DENOM_MASK) >> + CLKMGR_PERPLLGRP_VCO_DENOM_OFFSET) + 1; + clock *= ((reg & CLKMGR_PERPLLGRP_VCO_NUMER_MASK) >> + CLKMGR_PERPLLGRP_VCO_NUMER_OFFSET) + 1; + + return clock; +} + +unsigned long cm_get_mpu_clk_hz(void) +{ + uint32_t reg, clock; + + clock = cm_get_main_vco_clk_hz(); + + /* get the MPU clock */ + reg = readl(&clock_manager_base->altera.mpuclk); + clock /= (reg + 1); + reg = readl(&clock_manager_base->main_pll.mpuclk); + clock /= (reg + 1); + return clock; } + +unsigned long cm_get_sdram_clk_hz(void) +{ + uint32_t reg, clock = 0; + + /* identify SDRAM PLL clock source */ + reg = readl(&clock_manager_base->sdr_pll.vco); + reg = (reg & CLKMGR_SDRPLLGRP_VCO_SSRC_MASK) >> + CLKMGR_SDRPLLGRP_VCO_SSRC_OFFSET; + if (reg == CLKMGR_VCO_SSRC_EOSC1) + clock = CONFIG_HPS_CLK_OSC1_HZ; + else if (reg == CLKMGR_VCO_SSRC_EOSC2) + clock = CONFIG_HPS_CLK_OSC2_HZ; + else if (reg == CLKMGR_VCO_SSRC_F2S) + clock = CONFIG_HPS_CLK_F2S_SDR_REF_HZ; + + /* get the SDRAM VCO clock */ + reg = readl(&clock_manager_base->sdr_pll.vco); + clock /= ((reg & CLKMGR_SDRPLLGRP_VCO_DENOM_MASK) >> + CLKMGR_SDRPLLGRP_VCO_DENOM_OFFSET) + 1; + clock *= ((reg & CLKMGR_SDRPLLGRP_VCO_NUMER_MASK) >> + CLKMGR_SDRPLLGRP_VCO_NUMER_OFFSET) + 1; + + /* get the SDRAM (DDR_DQS) clock */ + reg = readl(&clock_manager_base->sdr_pll.ddrdqsclk); + reg = (reg & CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_MASK) >> + CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_OFFSET; + clock /= (reg + 1); + + return clock; +} + +unsigned int cm_get_l4_sp_clk_hz(void) +{ + uint32_t reg, clock = 0; + + /* identify the source of L4 SP clock */ + reg = readl(&clock_manager_base->main_pll.l4src); + reg = (reg & CLKMGR_MAINPLLGRP_L4SRC_L4SP) >> + CLKMGR_MAINPLLGRP_L4SRC_L4SP_OFFSET; + + if (reg == CLKMGR_L4_SP_CLK_SRC_MAINPLL) { + clock = cm_get_main_vco_clk_hz(); + + /* get the clock prior L4 SP divider (main clk) */ + reg = readl(&clock_manager_base->altera.mainclk); + clock /= (reg + 1); + reg = readl(&clock_manager_base->main_pll.mainclk); + clock /= (reg + 1); + } else if (reg == CLKMGR_L4_SP_CLK_SRC_PERPLL) { + clock = cm_get_per_vco_clk_hz(); + + /* get the clock prior L4 SP divider (periph_base_clk) */ + reg = readl(&clock_manager_base->per_pll.perbaseclk); + clock /= (reg + 1); + } + + /* get the L4 SP clock which supplied to UART */ + reg = readl(&clock_manager_base->main_pll.maindiv); + reg = (reg & CLKMGR_MAINPLLGRP_MAINDIV_L4SPCLK_MASK) >> + CLKMGR_MAINPLLGRP_MAINDIV_L4SPCLK_OFFSET; + clock = clock / (1 << reg); + + return clock; +} + +unsigned int cm_get_mmc_controller_clk_hz(void) +{ + uint32_t reg, clock = 0; + + /* identify the source of MMC clock */ + reg = readl(&clock_manager_base->per_pll.src); + reg = (reg & CLKMGR_PERPLLGRP_SRC_SDMMC_MASK) >> + CLKMGR_PERPLLGRP_SRC_SDMMC_OFFSET; + + if (reg == CLKMGR_SDMMC_CLK_SRC_F2S) { + clock = CONFIG_HPS_CLK_F2S_PER_REF_HZ; + } else if (reg == CLKMGR_SDMMC_CLK_SRC_MAIN) { + clock = cm_get_main_vco_clk_hz(); + + /* get the SDMMC clock */ + reg = readl(&clock_manager_base->main_pll.mainnandsdmmcclk); + clock /= (reg + 1); + } else if (reg == CLKMGR_SDMMC_CLK_SRC_PER) { + clock = cm_get_per_vco_clk_hz(); + + /* get the SDMMC clock */ + reg = readl(&clock_manager_base->per_pll.pernandsdmmcclk); + clock /= (reg + 1); + } + + /* further divide by 4 as we have fixed divider at wrapper */ + clock /= 4; + return clock; +} + +unsigned int cm_get_qspi_controller_clk_hz(void) +{ + uint32_t reg, clock = 0; + + /* identify the source of QSPI clock */ + reg = readl(&clock_manager_base->per_pll.src); + reg = (reg & CLKMGR_PERPLLGRP_SRC_QSPI_MASK) >> + CLKMGR_PERPLLGRP_SRC_QSPI_OFFSET; + + if (reg == CLKMGR_QSPI_CLK_SRC_F2S) { + clock = CONFIG_HPS_CLK_F2S_PER_REF_HZ; + } else if (reg == CLKMGR_QSPI_CLK_SRC_MAIN) { + clock = cm_get_main_vco_clk_hz(); + + /* get the qspi clock */ + reg = readl(&clock_manager_base->main_pll.mainqspiclk); + clock /= (reg + 1); + } else if (reg == CLKMGR_QSPI_CLK_SRC_PER) { + clock = cm_get_per_vco_clk_hz(); + + /* get the qspi clock */ + reg = readl(&clock_manager_base->per_pll.perqspiclk); + clock /= (reg + 1); + } + + return clock; +} + +static void cm_print_clock_quick_summary(void) +{ + printf("MPU %10ld kHz\n", cm_get_mpu_clk_hz() / 1000); + printf("DDR %10ld kHz\n", cm_get_sdram_clk_hz() / 1000); + printf("EOSC1 %8d kHz\n", CONFIG_HPS_CLK_OSC1_HZ / 1000); + printf("EOSC2 %8d kHz\n", CONFIG_HPS_CLK_OSC2_HZ / 1000); + printf("F2S_SDR_REF %8d kHz\n", CONFIG_HPS_CLK_F2S_SDR_REF_HZ / 1000); + printf("F2S_PER_REF %8d kHz\n", CONFIG_HPS_CLK_F2S_PER_REF_HZ / 1000); + printf("MMC %8d kHz\n", cm_get_mmc_controller_clk_hz() / 1000); + printf("QSPI %8d kHz\n", cm_get_qspi_controller_clk_hz() / 1000); + printf("UART %8d kHz\n", cm_get_l4_sp_clk_hz() / 1000); +} + +int set_cpu_clk_info(void) +{ + /* Calculate the clock frequencies required for drivers */ + cm_get_l4_sp_clk_hz(); + cm_get_mmc_controller_clk_hz(); + + gd->bd->bi_arm_freq = cm_get_mpu_clk_hz() / 1000000; + gd->bd->bi_dsp_freq = 0; + gd->bd->bi_ddr_freq = cm_get_sdram_clk_hz() / 1000000; + + return 0; +} + +int do_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + cm_print_clock_quick_summary(); + return 0; +} + +U_BOOT_CMD( + clocks, CONFIG_SYS_MAXARGS, 1, do_showclocks, + "display clocks", + "" +); |