summaryrefslogtreecommitdiff
path: root/arch/ppc/cpu/ppc4xx/usbdev.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/ppc/cpu/ppc4xx/usbdev.c')
-rw-r--r--arch/ppc/cpu/ppc4xx/usbdev.c230
1 files changed, 230 insertions, 0 deletions
diff --git a/arch/ppc/cpu/ppc4xx/usbdev.c b/arch/ppc/cpu/ppc4xx/usbdev.c
new file mode 100644
index 0000000000..fe398afc02
--- /dev/null
+++ b/arch/ppc/cpu/ppc4xx/usbdev.c
@@ -0,0 +1,230 @@
+/*USB 1.1,2.0 device*/
+
+#include <common.h>
+#include <asm/processor.h>
+
+#if (defined(CONFIG_440EP) || defined(CONFIG_440EPX)) && defined(CONFIG_CMD_USB)
+
+#include <usb.h>
+#include <asm/ppc4xx-uic.h>
+#include "usbdev.h"
+
+#define USB_DT_DEVICE 0x01
+#define USB_DT_CONFIG 0x02
+#define USB_DT_STRING 0x03
+#define USB_DT_INTERFACE 0x04
+#define USB_DT_ENDPOINT 0x05
+
+int set_value = -1;
+
+void process_endpoints(unsigned short usb2d0_intrin)
+{
+ /*will hold the packet received */
+ struct usb_device_descriptor usb_device_packet;
+ struct usb_configuration_descriptor usb_config_packet;
+ struct usb_string_descriptor usb_string_packet;
+ struct devrequest setup_packet;
+ unsigned int *setup_packet_pt;
+ unsigned char *packet_pt = NULL;
+ int temp, temp1;
+
+ int i;
+
+ /*printf("{USB device} - endpoint 0x%X \n", usb2d0_intrin); */
+
+ /*set usb address, seems to not work unless it is done in the next
+ interrupt, so that is why it is done this way */
+ if (set_value != -1)
+ *(unsigned char *)USB2D0_FADDR_8 = (unsigned char)set_value;
+
+ /*endpoint 1 */
+ if (usb2d0_intrin & 0x01) {
+ setup_packet_pt = (unsigned int *)&setup_packet;
+
+ /*copy packet */
+ setup_packet_pt[0] = *(unsigned int *)USB2D0_FIFO_0;
+ setup_packet_pt[1] = *(unsigned int *)USB2D0_FIFO_0;
+ temp = *(unsigned int *)USB2D0_FIFO_0;
+ temp1 = *(unsigned int *)USB2D0_FIFO_0;
+
+ /*do some swapping */
+ setup_packet.value = swap_16(setup_packet.value);
+ setup_packet.index = swap_16(setup_packet.index);
+ setup_packet.length = swap_16(setup_packet.length);
+
+ /*clear rx packet */
+ *(unsigned short *)USB2D0_INCSR0_8 = 0x48;
+
+ /*printf("0x%X 0x%X 0x%X 0x%X 0x%X 0x%X 0x%X\n", setup_packet.requesttype,
+ setup_packet.request, setup_packet.value,
+ setup_packet.index, setup_packet.length, temp, temp1 ); */
+
+ switch (setup_packet.request) {
+ case USB_REQ_GET_DESCRIPTOR:
+
+ switch (setup_packet.value >> 8) {
+ case USB_DT_DEVICE:
+ /*create packet */
+ usb_device_packet.bLength = 18;
+ usb_device_packet.bDescriptorType =
+ USB_DT_DEVICE;
+#ifdef USB_2_0_DEVICE
+ usb_device_packet.bcdUSB = swap_16(0x200);
+#else
+ usb_device_packet.bcdUSB = swap_16(0x110);
+#endif
+ usb_device_packet.bDeviceClass = 0xff;
+ usb_device_packet.bDeviceSubClass = 0;
+ usb_device_packet.bDeviceProtocol = 0;
+ usb_device_packet.bMaxPacketSize0 = 32;
+ usb_device_packet.idVendor = swap_16(1);
+ usb_device_packet.idProduct = swap_16(2);
+ usb_device_packet.bcdDevice = swap_16(0x300);
+ usb_device_packet.iManufacturer = 1;
+ usb_device_packet.iProduct = 1;
+ usb_device_packet.iSerialNumber = 1;
+ usb_device_packet.bNumConfigurations = 1;
+
+ /*put packet in fifo */
+ packet_pt = (unsigned char *)&usb_device_packet;
+ break;
+
+ case USB_DT_CONFIG:
+ /*create packet */
+ usb_config_packet.bLength = 9;
+ usb_config_packet.bDescriptorType =
+ USB_DT_CONFIG;
+ usb_config_packet.wTotalLength = swap_16(25);
+ usb_config_packet.bNumInterfaces = 1;
+ usb_config_packet.bConfigurationValue = 1;
+ usb_config_packet.iConfiguration = 0;
+ usb_config_packet.bmAttributes = 0x40;
+ usb_config_packet.bMaxPower = 0;
+
+ /*put packet in fifo */
+ packet_pt = (unsigned char *)&usb_config_packet;
+ break;
+
+ case USB_DT_STRING:
+ /*create packet */
+ usb_string_packet.bLength = 2;
+ usb_string_packet.bDescriptorType =
+ USB_DT_STRING;
+ usb_string_packet.wData[0] = 0x0094;
+
+ /*put packet in fifo */
+ packet_pt = (unsigned char *)&usb_string_packet;
+ break;
+ }
+
+ /*put packet in fifo */
+ for (i = 0; i < (setup_packet.length); i++) {
+ *(unsigned char *)USB2D0_FIFO_0 = packet_pt[i];
+ }
+
+ /*give tx command */
+ *(unsigned short *)USB2D0_INCSR0_8 = 0x0a;
+
+ break;
+
+ case USB_REQ_SET_ADDRESS:
+
+ /*copy usb address */
+ set_value = setup_packet.value;
+
+ break;
+ }
+
+ }
+}
+
+void process_other(unsigned char usb2d0_intrusb)
+{
+
+ /*check for sof */
+ if (usb2d0_intrusb & 0x08) {
+ /*printf("{USB device} - sof detected\n"); */
+ }
+
+ /*check for reset */
+ if (usb2d0_intrusb & 0x04) {
+ /*printf("{USB device} - reset detected\n"); */
+
+ /*copy usb address of zero, need to do this when usb reset */
+ set_value = 0;
+ }
+
+ if (usb2d0_intrusb & 0x02) {
+ /*printf("{USB device} - resume detected\n"); */
+ }
+
+ if (usb2d0_intrusb & 0x01) {
+ /*printf("{USB device} - suspend detected\n"); */
+ }
+}
+
+int usbInt(void)
+{
+ /*Must read these 2 registers and use values to clear interrupts. If you
+ do not read them then the interrupt will not be cleared. If you do not
+ use the variable the optimizer will not do a read. */
+ volatile unsigned short usb2d0_intrin =
+ *(unsigned short *)USB2D0_INTRIN_16;
+ volatile unsigned char usb2d0_intrusb =
+ *(unsigned char *)USB2D0_INTRUSB_8;
+
+ /*check if there was an endpoint interrupt */
+ if (usb2d0_intrin != 0) {
+ process_endpoints(usb2d0_intrin);
+ }
+
+ /*check for other interrupts */
+ if (usb2d0_intrusb != 0) {
+ process_other(usb2d0_intrusb);
+ }
+
+ return 0;
+}
+
+#if defined(CONFIG_440EPX)
+void usb_dev_init()
+{
+ printf("USB 2.0 Device init\n");
+
+ /*usb dev init */
+ *(unsigned char *)USB2D0_POWER_8 = 0xa1; /* 2.0 */
+
+ /*enable interrupts */
+ *(unsigned char *)USB2D0_INTRUSBE_8 = 0x0f;
+
+ irq_install_handler(VECNUM_USBDEV, (interrupt_handler_t *) usbInt,
+ NULL);
+}
+#else
+void usb_dev_init()
+{
+#ifdef USB_2_0_DEVICE
+ printf("USB 2.0 Device init\n");
+ /*select 2.0 device */
+ mtsdr(SDR0_USB0, 0x0); /* 2.0 */
+
+ /*usb dev init */
+ *(unsigned char *)USB2D0_POWER_8 = 0xa1; /* 2.0 */
+#else
+ printf("USB 1.1 Device init\n");
+ /*select 1.1 device */
+ mtsdr(SDR0_USB0, 0x2); /* 1.1 */
+
+ /*usb dev init */
+ *(unsigned char *)USB2D0_POWER_8 = 0xc0; /* 1.1 */
+#endif
+
+ /*enable interrupts */
+ *(unsigned char *)USB2D0_INTRUSBE_8 = 0x0f;
+
+ irq_install_handler(VECNUM_USBDEV, (interrupt_handler_t *) usbInt,
+ NULL);
+}
+#endif
+
+#endif /* CONFIG_440EP || CONFIG_440EPX */