diff options
Diffstat (limited to 'board/dbau1x00/dbau1x00.c')
| -rw-r--r-- | board/dbau1x00/dbau1x00.c | 127 |
1 files changed, 0 insertions, 127 deletions
diff --git a/board/dbau1x00/dbau1x00.c b/board/dbau1x00/dbau1x00.c deleted file mode 100644 index d29e8d591e..0000000000 --- a/board/dbau1x00/dbau1x00.c +++ /dev/null @@ -1,127 +0,0 @@ -/* - * (C) Copyright 2003 - * Thomas.Lange@corelatus.se - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <command.h> -#include <asm/au1x00.h> -#include <asm/mipsregs.h> - -long int initdram(int board_type) -{ - /* Sdram is setup by assembler code */ - /* If memory could be changed, we should return the true value here */ - return MEM_SIZE*1024*1024; -} - -#define BCSR_PCMCIA_PC0DRVEN 0x0010 -#define BCSR_PCMCIA_PC0RST 0x0080 - -/* In cpu/mips/cpu.c */ -void write_one_tlb( int index, u32 pagemask, u32 hi, u32 low0, u32 low1 ); - -int checkboard (void) -{ -#ifdef CONFIG_IDE_PCMCIA - u16 status; - volatile u32 *pcmcia_bcsr = (u32*)(DB1XX0_BCSR_ADDR+0x10); -#endif /* CONFIG_IDE_PCMCIA */ - volatile u32 *phy = (u32*)(DB1XX0_BCSR_ADDR+0xC); - volatile u32 *sys_counter = (volatile u32*)SYS_COUNTER_CNTRL; - u32 proc_id; - - *sys_counter = 0x100; /* Enable 32 kHz oscillator for RTC/TOY */ - - proc_id = read_32bit_cp0_register(CP0_PRID); - - switch (proc_id >> 24) { - case 0: - puts ("Board: Merlot (DbAu1000)\n"); - printf ("CPU: Au1000 396 MHz, id: 0x%02x, rev: 0x%02x\n", - (proc_id >> 8) & 0xFF, proc_id & 0xFF); - break; - case 1: - puts ("Board: DbAu1500\n"); - printf ("CPU: Au1500, id: 0x%02x, rev: 0x%02x\n", - (proc_id >> 8) & 0xFF, proc_id & 0xFF); - break; - case 2: - puts ("Board: DbAu1100\n"); - printf ("CPU: Au1100, id: 0x%02x, rev: 0x%02x\n", - (proc_id >> 8) & 0xFF, proc_id & 0xFF); - break; - case 3: - puts ("Board: DbAu1550\n"); - printf ("CPU: Au1550, id: 0x%02x, rev: 0x%02x\n", - (proc_id >> 8) & 0xFF, proc_id & 0xFF); - break; - default: - printf ("Unsupported cpu %d, proc_id=0x%x\n", proc_id >> 24, proc_id); - } -#ifdef CONFIG_IDE_PCMCIA - /* Enable 3.3 V on slot 0 ( VCC ) - No 5V */ - status = 4; - *pcmcia_bcsr = status; - - status |= BCSR_PCMCIA_PC0DRVEN; - *pcmcia_bcsr = status; - au_sync(); - - udelay(300*1000); - - status |= BCSR_PCMCIA_PC0RST; - *pcmcia_bcsr = status; - au_sync(); - - udelay(100*1000); - - /* PCMCIA is on a 36 bit physical address. - We need to map it into a 32 bit addresses */ - -#if 0 - /* We dont need theese unless we run whole pcmcia package */ - write_one_tlb(20, /* index */ - 0x01ffe000, /* Pagemask, 16 MB pages */ - CFG_PCMCIA_IO_BASE, /* Hi */ - 0x3C000017, /* Lo0 */ - 0x3C200017); /* Lo1 */ - - write_one_tlb(21, /* index */ - 0x01ffe000, /* Pagemask, 16 MB pages */ - CFG_PCMCIA_ATTR_BASE, /* Hi */ - 0x3D000017, /* Lo0 */ - 0x3D200017); /* Lo1 */ -#endif /* 0 */ - write_one_tlb(22, /* index */ - 0x01ffe000, /* Pagemask, 16 MB pages */ - CFG_PCMCIA_MEM_ADDR, /* Hi */ - 0x3E000017, /* Lo0 */ - 0x3E200017); /* Lo1 */ -#endif /* CONFIG_IDE_PCMCIA */ - - /* Release reset of ethernet PHY chips */ - /* Always do this, because linux does not know about it */ - *phy = 3; - - return 0; -} |