1 files changed, 142 insertions, 0 deletions
diff --git a/board/freescale/imx93_evk/spl.c b/board/freescale/imx93_evk/spl.c
new file mode 100644
index 0000000000..9a041af30e
--- /dev/null
+++ b/board/freescale/imx93_evk/spl.c
@@ -0,0 +1,142 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2022 NXP
+ */
+
+#include <common.h>
+#include <command.h>
+#include <cpu_func.h>
+#include <hang.h>
+#include <image.h>
+#include <init.h>
+#include <log.h>
+#include <spl.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/arch/imx93_pins.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/mach-imx/boot_mode.h>
+#include <asm/mach-imx/mxc_i2c.h>
+#include <asm/arch-mx7ulp/gpio.h>
+#include <asm/mach-imx/syscounter.h>
+#include <asm/mach-imx/s400_api.h>
+#include <dm/uclass.h>
+#include <dm/device.h>
+#include <dm/uclass-internal.h>
+#include <dm/device-internal.h>
+#include <linux/delay.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/ccm_regs.h>
+#include <asm/arch/ddr.h>
+#include <power/pmic.h>
+#include <power/pca9450.h>
+#include <asm/arch/trdc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int spl_board_boot_device(enum boot_device boot_dev_spl)
+{
+	return BOOT_DEVICE_BOOTROM;
+}
+
+void spl_board_init(void)
+{
+	puts("Normal Boot\n");
+}
+
+void spl_dram_init(void)
+{
+	ddr_init(&dram_timing);
+}
+
+#if CONFIG_IS_ENABLED(DM_PMIC_PCA9450)
+int power_init_board(void)
+{
+	struct udevice *dev;
+	int ret;
+
+	ret = pmic_get("pmic@25", &dev);
+	if (ret == -ENODEV) {
+		puts("No pca9450@25\n");
+		return 0;
+	}
+	if (ret != 0)
+		return ret;
+
+	/* BUCKxOUT_DVS0/1 control BUCK123 output */
+	pmic_reg_write(dev, PCA9450_BUCK123_DVS, 0x29);
+
+	/* enable DVS control through PMIC_STBY_REQ */
+	pmic_reg_write(dev, PCA9450_BUCK1CTRL, 0x59);
+
+	if (IS_ENABLED(CONFIG_IMX9_LOW_DRIVE_MODE)){
+		/* 0.75v for Low drive mode
+		 */
+		pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS0, 0x0c);
+		pmic_reg_write(dev, PCA9450_BUCK3OUT_DVS0, 0x0c);
+	} else {
+		/* 0.9v for Over drive mode
+		 */
+		pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS0, 0x18);
+		pmic_reg_write(dev, PCA9450_BUCK3OUT_DVS0, 0x18);
+	}
+
+	/* set standby voltage to 0.65v */
+	pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS1, 0x4);
+
+	/* I2C_LT_EN*/
+	pmic_reg_write(dev, 0xa, 0x3);
+
+	/* set WDOG_B_CFG to cold reset */
+	pmic_reg_write(dev, PCA9450_RESET_CTRL, 0xA1);
+	return 0;
+}
+#endif
+
+void board_init_f(ulong dummy)
+{
+	int ret;
+
+	/* Clear the BSS. */
+	memset(__bss_start, 0, __bss_end - __bss_start);
+
+	timer_init();
+
+	arch_cpu_init();
+
+	board_early_init_f();
+
+	spl_early_init();
+
+	preloader_console_init();
+
+	ret = arch_cpu_init_dm();
+	if (ret) {
+		printf("Fail to init Sentinel API\n");
+	} else {
+		printf("SOC: 0x%x\n", gd->arch.soc_rev);
+		printf("LC: 0x%x\n", gd->arch.lifecycle);
+	}
+
+	power_init_board();
+
+	if (!IS_ENABLED(CONFIG_IMX9_LOW_DRIVE_MODE))
+		set_arm_core_max_clk();
+
+	/* Init power of mix */
+	soc_power_init();
+
+	/* Setup TRDC for DDR access */
+	trdc_init();
+
+	/* DDR initialization */
+	spl_dram_init();
+
+	/* Put M33 into CPUWAIT for following kick */
+	ret = m33_prepare();
+	if (!ret)
+		printf("M33 prepare ok\n");
+
+	board_init_r(NULL, 0);
+}