diff options
Diffstat (limited to 'board/toradex/apalis_imx6/apalis_imx6.c')
| -rw-r--r-- | board/toradex/apalis_imx6/apalis_imx6.c | 91 |
1 files changed, 73 insertions, 18 deletions
diff --git a/board/toradex/apalis_imx6/apalis_imx6.c b/board/toradex/apalis_imx6/apalis_imx6.c index b2bb875789..f5f51fcda8 100644 --- a/board/toradex/apalis_imx6/apalis_imx6.c +++ b/board/toradex/apalis_imx6/apalis_imx6.c @@ -208,22 +208,79 @@ iomux_v3_cfg_t const usdhc3_pads[] = { int mx6_rgmii_rework(struct phy_device *phydev) { - /* control data pad skew - devaddr = 0x02, register = 0x04 */ - ksz9031_phy_extended_write(phydev, 0x02, - MII_KSZ9031_EXT_RGMII_CTRL_SIG_SKEW, - MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x0000); - /* rx data pad skew - devaddr = 0x02, register = 0x05 */ - ksz9031_phy_extended_write(phydev, 0x02, - MII_KSZ9031_EXT_RGMII_RX_DATA_SKEW, - MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x0000); - /* tx data pad skew - devaddr = 0x02, register = 0x05 */ - ksz9031_phy_extended_write(phydev, 0x02, - MII_KSZ9031_EXT_RGMII_TX_DATA_SKEW, - MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x0000); - /* gtx and rx clock pad skew - devaddr = 0x02, register = 0x08 */ - ksz9031_phy_extended_write(phydev, 0x02, - MII_KSZ9031_EXT_RGMII_CLOCK_SKEW, - MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x03FF); + int tmp; + + switch (ksz9xx1_phy_get_id(phydev) & MII_KSZ9x31_SILICON_REV_MASK) { + case PHY_ID_KSZ9131: + /* read rxc dll control - devaddr = 0x02, register = 0x4c */ + tmp = ksz9031_phy_extended_read(phydev, 0x02, + MII_KSZ9131_EXT_RGMII_2NS_SKEW_RXDLL, + MII_KSZ9031_MOD_DATA_NO_POST_INC); + /* disable rxdll bypass (enable 2ns skew delay on RXC) */ + tmp &= ~MII_KSZ9131_RXTXDLL_BYPASS; + /* rxc data pad skew 2ns - devaddr = 0x02, register = 0x4c */ + ksz9031_phy_extended_write(phydev, 0x02, + MII_KSZ9131_EXT_RGMII_2NS_SKEW_RXDLL, + MII_KSZ9031_MOD_DATA_NO_POST_INC, + tmp); + /* read txc dll control - devaddr = 0x02, register = 0x4d */ + tmp = ksz9031_phy_extended_read(phydev, 0x02, + MII_KSZ9131_EXT_RGMII_2NS_SKEW_TXDLL, + MII_KSZ9031_MOD_DATA_NO_POST_INC); + /* disable rxdll bypass (enable 2ns skew delay on TXC) */ + tmp &= ~MII_KSZ9131_RXTXDLL_BYPASS; + /* txc data pad skew 2ns - devaddr = 0x02, register = 0x4d */ + ksz9031_phy_extended_write(phydev, 0x02, + MII_KSZ9131_EXT_RGMII_2NS_SKEW_TXDLL, + MII_KSZ9031_MOD_DATA_NO_POST_INC, + tmp); + + /* control data pad skew - devaddr = 0x02, register = 0x04 */ + ksz9031_phy_extended_write(phydev, 0x02, + MII_KSZ9031_EXT_RGMII_CTRL_SIG_SKEW, + MII_KSZ9031_MOD_DATA_NO_POST_INC, + 0x007d); + /* rx data pad skew - devaddr = 0x02, register = 0x05 */ + ksz9031_phy_extended_write(phydev, 0x02, + MII_KSZ9031_EXT_RGMII_RX_DATA_SKEW, + MII_KSZ9031_MOD_DATA_NO_POST_INC, + 0x7777); + /* tx data pad skew - devaddr = 0x02, register = 0x05 */ + ksz9031_phy_extended_write(phydev, 0x02, + MII_KSZ9031_EXT_RGMII_TX_DATA_SKEW, + MII_KSZ9031_MOD_DATA_NO_POST_INC, + 0xdddd); + /* gtx and rx clock pad skew - devaddr = 0x02,register = 0x08 */ + ksz9031_phy_extended_write(phydev, 0x02, + MII_KSZ9031_EXT_RGMII_CLOCK_SKEW, + MII_KSZ9031_MOD_DATA_NO_POST_INC, + 0x0007); + break; + case PHY_ID_KSZ9031: + default: + /* control data pad skew - devaddr = 0x02, register = 0x04 */ + ksz9031_phy_extended_write(phydev, 0x02, + MII_KSZ9031_EXT_RGMII_CTRL_SIG_SKEW, + MII_KSZ9031_MOD_DATA_NO_POST_INC, + 0x0000); + /* rx data pad skew - devaddr = 0x02, register = 0x05 */ + ksz9031_phy_extended_write(phydev, 0x02, + MII_KSZ9031_EXT_RGMII_RX_DATA_SKEW, + MII_KSZ9031_MOD_DATA_NO_POST_INC, + 0x0000); + /* tx data pad skew - devaddr = 0x02, register = 0x05 */ + ksz9031_phy_extended_write(phydev, 0x02, + MII_KSZ9031_EXT_RGMII_TX_DATA_SKEW, + MII_KSZ9031_MOD_DATA_NO_POST_INC, + 0x0000); + /* gtx and rx clock pad skew - devaddr = 0x02,register = 0x08 */ + ksz9031_phy_extended_write(phydev, 0x02, + MII_KSZ9031_EXT_RGMII_CLOCK_SKEW, + MII_KSZ9031_MOD_DATA_NO_POST_INC, + 0x03FF); + break; + } + return 0; } @@ -480,8 +537,6 @@ int board_mmc_init(bd_t *bis) int board_phy_config(struct phy_device *phydev) { - ksz9031_center_flp_timing(phydev); - mx6_rgmii_rework(phydev); if (phydev->drv->config) phydev->drv->config(phydev); |