diff options
Diffstat (limited to 'include/configs/TQM85xx.h')
| -rw-r--r-- | include/configs/TQM85xx.h | 697 |
1 files changed, 0 insertions, 697 deletions
diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h deleted file mode 100644 index 95455c49c3..0000000000 --- a/include/configs/TQM85xx.h +++ /dev/null @@ -1,697 +0,0 @@ -/* - * (C) Copyright 2007 - * Thomas Waehner, TQ-System GmbH, thomas.waehner@tqs.de. - * - * (C) Copyright 2005 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * Wolfgang Denk <wd@denx.de> - * Copyright 2004 Freescale Semiconductor. - * (C) Copyright 2002,2003 Motorola,Inc. - * Xianghua Xiao <X.Xiao@motorola.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * TQM85xx (8560/40/55/41/48) board configuration file - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* High Level Configuration Options */ -#define CONFIG_BOOKE 1 /* BOOKE */ -#define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41 */ - -#if defined(CONFIG_TQM8548_BE) -#define CONFIG_SYS_TEXT_BASE 0xfff80000 -#else -#define CONFIG_SYS_TEXT_BASE 0xfffc0000 -#endif - -#if defined(CONFIG_TQM8548_AG) || defined(CONFIG_TQM8548_BE) -#define CONFIG_TQM8548 -#endif - -#define CONFIG_PCI -#ifndef CONFIG_TQM8548_AG -#define CONFIG_PCI1 /* PCI/PCI-X controller */ -#endif -#ifdef CONFIG_TQM8548 -#define CONFIG_PCIE1 /* PCI Express interface */ -#endif - -#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ -#define CONFIG_PCIX_CHECK /* PCIX olny works at 66 MHz */ -#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ - -#define CONFIG_TSEC_ENET /* tsec ethernet support */ - -#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ - - /* - * Configuration for big NOR Flashes - * - * Define CONFIG_TQM_BIGFLASH for boards with more than 128 MiB NOR Flash. - * Please be aware, that this changes the whole memory map (new CCSRBAR - * address, etc). You have to use an adapted Linux kernel or FDT blob - * if this option is set. - */ -#undef CONFIG_TQM_BIGFLASH - -/* - * NAND flash support (disabled by default) - * - * Warning: NAND support will likely increase the U-Boot image size - * to more than 256 KB. Please adjust CONFIG_SYS_TEXT_BASE if necessary. - */ -#ifdef CONFIG_TQM8548_BE -#define CONFIG_NAND -#endif - -/* - * MPC8540 and MPC8548 don't have CPM module - */ -#if !defined(CONFIG_MPC8540) && !defined(CONFIG_MPC8548) -#define CONFIG_CPM2 1 /* has CPM2 */ -#endif - -#define CONFIG_FSL_LAW 1 /* Use common FSL init code */ - -#if defined(CONFIG_TQM8548_AG) || defined(CONFIG_TQM8548_BE) -#define CONFIG_CAN_DRIVER /* CAN Driver support */ -#endif - -/* - * sysclk for MPC85xx - * - * Two valid values are: - * 33333333 - * 66666666 - * - * Most PCI cards are still 33Mhz, so in the presence of PCI, 33MHz - * is likely the desired value here, so that is now the default. - * The board, however, can run at 66MHz. In any event, this value - * must match the settings of some switches. Details can be found - * in the README.mpc85xxads. - */ - -#ifndef CONFIG_SYS_CLK_FREQ -#define CONFIG_SYS_CLK_FREQ 33333333 -#endif - -/* - * These can be toggled for performance analysis, otherwise use default. - */ -#define CONFIG_L2_CACHE /* toggle L2 cache */ -#define CONFIG_BTB /* toggle branch predition */ - -#define CONFIG_SYS_INIT_DBCR DBCR_IDM /* Enable Debug Exceptions */ - -#undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */ -#define CONFIG_SYS_MEMTEST_START 0x00000000 -#define CONFIG_SYS_MEMTEST_END 0x10000000 - -#ifdef CONFIG_TQM_BIGFLASH -#define CONFIG_SYS_CCSRBAR 0xA0000000 -#else -#define CONFIG_SYS_CCSRBAR 0xE0000000 -#endif -#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR - -/* - * DDR Setup - */ -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory */ - -#if defined(CONFIG_TQM_BIGFLASH) || \ - (!defined(CONFIG_TQM8548_AG) && !defined(CONFIG_TQM8548_BE)) -#define CONFIG_SYS_PPC_DDR_WIMGE (MAS2_I | MAS2_G) -#define CONFIG_SYS_DDR_EARLY_SIZE_MB (512) -#else -#define CONFIG_SYS_PPC_DDR_WIMGE (0) -#define CONFIG_SYS_DDR_EARLY_SIZE_MB (2 * 1024) -#endif - -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE -#ifdef CONFIG_TQM8548_AG -#define CONFIG_VERY_BIG_RAM -#endif - -#define CONFIG_NUM_DDR_CONTROLLERS 1 -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL 2 - -#if defined(CONFIG_TQM8540) || defined(CONFIG_TQM8560) -/* TQM8540 & 8560 need DLL-override */ -#define CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN /* possible DLL fix needed */ -#define CONFIG_DDR_DEFAULT_CL 25 /* CAS latency 2,5 */ -#endif /* CONFIG_TQM8540 || CONFIG_TQM8560 */ - -#if defined(CONFIG_TQM8541) || defined(CONFIG_TQM8555) || \ - defined(CONFIG_TQM8548) -#define CONFIG_DDR_DEFAULT_CL 30 /* CAS latency 3 */ -#endif /* CONFIG_TQM8541 || CONFIG_TQM8555 || CONFIG_TQM8548 */ - -/* - * Flash on the Local Bus - */ -#ifdef CONFIG_TQM_BIGFLASH -#define CONFIG_SYS_FLASH0 0xE0000000 -#define CONFIG_SYS_FLASH1 0xC0000000 -#else /* !CONFIG_TQM_BIGFLASH */ -#define CONFIG_SYS_FLASH0 0xFC000000 -#define CONFIG_SYS_FLASH1 0xF8000000 -#endif /* CONFIG_TQM_BIGFLASH */ -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH1, CONFIG_SYS_FLASH0 } - -#define CONFIG_SYS_LBC_FLASH_BASE CONFIG_SYS_FLASH1 /* Localbus flash start */ -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_LBC_FLASH_BASE /* start of FLASH */ - -/* Default ORx timings are for <= 41.7 MHz Local Bus Clock. - * - * Note: According to timing specifications external addr latch delay - * (EAD, bit #0) must be set if Local Bus Clock is > 83 MHz. - * - * For other Local Bus Clocks see following table: - * - * Clock/MHz CONFIG_SYS_ORx_PRELIM - * 166 0x.....CA5 - * 133 0x.....C85 - * 100 0x.....C65 - * 83 0x.....FA2 - * 66 0x.....C82 - * 50 0x.....C60 - * 42 0x.....040 - * 33 0x.....030 - * 25 0x.....020 - * - */ -#ifdef CONFIG_TQM_BIGFLASH -#define CONFIG_SYS_BR0_PRELIM 0xE0001801 /* port size 32bit */ -#define CONFIG_SYS_OR0_PRELIM 0xE0000040 /* 512MB Flash */ -#define CONFIG_SYS_BR1_PRELIM 0xC0001801 /* port size 32bit */ -#define CONFIG_SYS_OR1_PRELIM 0xE0000040 /* 512MB Flash */ -#else /* !CONFIG_TQM_BIGFLASH */ -#define CONFIG_SYS_BR0_PRELIM 0xfc001801 /* port size 32bit */ -#define CONFIG_SYS_OR0_PRELIM 0xfc000040 /* 64MB Flash */ -#define CONFIG_SYS_BR1_PRELIM 0xf8001801 /* port size 32bit */ -#define CONFIG_SYS_OR1_PRELIM 0xfc000040 /* 64MB Flash */ -#endif /* CONFIG_TQM_BIGFLASH */ - -#define CONFIG_SYS_FLASH_CFI /* flash is CFI compat. */ -#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */ -#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector */ -#define CONFIG_SYS_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash*/ -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* speed up output to Flash */ - -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 /* sectors per device */ -#undef CONFIG_SYS_FLASH_CHECKSUM -#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ - -/* - * Note: when changing the Local Bus clock divider you have to - * change the timing values in CONFIG_SYS_ORx_PRELIM. - * - * LCRR[00:03] CLKDIV: System (CCB) clock divider. Valid values are 2, 4, 8. - * LCRR[16:17] EADC : External address delay cycles. It should be set to 2 - * for Local Bus Clock > 83.3 MHz. - */ -#define CONFIG_SYS_LBC_LCRR 0x00030008 /* LB clock ratio reg */ -#define CONFIG_SYS_LBC_LBCR 0x00000000 /* LB config reg */ -#define CONFIG_SYS_LBC_LSRT 0x20000000 /* LB sdram refresh timer */ -#define CONFIG_SYS_LBC_MRTPR 0x20000000 /* LB refresh timer presc.*/ - -#define CONFIG_SYS_INIT_RAM_LOCK 1 -#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_CCSRBAR \ - + 0x04010000) /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size used area in RAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_LEN (~CONFIG_SYS_TEXT_BASE + 1)/* Reserved for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (384 * 1024) /* Reserved for malloc */ - -/* Serial Port */ -#if defined(CONFIG_TQM8560) - -#define CONFIG_CONS_ON_SCC /* define if console on SCC */ -#undef CONFIG_CONS_NONE /* define if console on something else */ -#define CONFIG_CONS_INDEX 1 /* which serial channel for console */ - -#else /* !CONFIG_TQM8560 */ - -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) - -/* PS/2 Keyboard */ -#define CONFIG_PS2KBD /* AT-PS/2 Keyboard */ -#define CONFIG_PS2MULT /* .. on PS/2 Multiplexer */ -#define CONFIG_PS2SERIAL 2 /* .. on DUART2 */ -#define CONFIG_PS2MULT_DELAY (CONFIG_SYS_HZ/2) /* Initial delay */ -#define CONFIG_BOARD_EARLY_INIT_R 1 - -#endif /* CONFIG_TQM8560 */ - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} - -#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ -#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */ -#define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser */ - -/* pass open firmware flat tree */ -#define CONFIG_OF_LIBFDT 1 -#define CONFIG_OF_BOARD_SETUP 1 -#define CONFIG_OF_STDOUT_VIA_ALIAS 1 - -/* CAN */ -#define CONFIG_SYS_CAN_BASE (CONFIG_SYS_CCSRBAR \ - + 0x03000000) /* CAN base address */ -#ifdef CONFIG_CAN_DRIVER -#define CONFIG_SYS_CAN_OR_AM 0xFFFF8000 /* 32 KiB address mask */ -#define CONFIG_SYS_OR2_CAN (CONFIG_SYS_CAN_OR_AM | OR_UPM_BI) -#define CONFIG_SYS_BR2_CAN ((CONFIG_SYS_CAN_BASE & BR_BA) | \ - BR_PS_8 | BR_MS_UPMC | BR_V) -#endif /* CONFIG_CAN_DRIVER */ - -/* - * I2C - */ -#define CONFIG_FSL_I2C /* Use FSL common I2C driver */ -#define CONFIG_HARD_I2C /* I2C with hardware support */ -#undef CONFIG_SOFT_I2C /* I2C bit-banged */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F -#define CONFIG_SYS_I2C_NOPROBES {0x48} /* Don't probe these addrs */ -#define CONFIG_SYS_I2C_OFFSET 0x3000 - -/* I2C RTC */ -#define CONFIG_RTC_DS1337 /* Use ds1337 rtc via i2c */ -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 /* at address 0x68 */ - -/* I2C EEPROM */ -/* - * EEPROM configuration for onboard EEPROM M24C32 (M24C64 should work also). - */ -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* 1010000x */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 /* =32 Bytes per write */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20 -#define CONFIG_SYS_I2C_MULTI_EEPROMS 1 /* more than one eeprom */ - -/* I2C SYSMON (LM75) */ -#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */ -#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */ -#define CONFIG_SYS_DTT_MAX_TEMP 70 -#define CONFIG_SYS_DTT_LOW_TEMP -30 -#define CONFIG_SYS_DTT_HYSTERESIS 3 - -#ifndef CONFIG_PCIE1 -/* RapidIO MMU */ -#ifdef CONFIG_TQM_BIGFLASH -#define CONFIG_SYS_RIO_MEM_BASE 0xb0000000 /* base address */ -#define CONFIG_SYS_RIO_MEM_SIZE 0x10000000 /* 256M */ -#else /* !CONFIG_TQM_BIGFLASH */ -#define CONFIG_SYS_RIO_MEM_BASE 0xc0000000 /* base address */ -#define CONFIG_SYS_RIO_MEM_SIZE 0x20000000 /* 512M */ -#endif /* CONFIG_TQM_BIGFLASH */ -#define CONFIG_SYS_RIO_MEM_PHYS CONFIG_SYS_RIO_MEM_BASE -#endif /* CONFIG_PCIE1 */ - -/* NAND FLASH */ -#ifdef CONFIG_NAND - -#define CONFIG_NAND_FSL_UPM 1 - -#define CONFIG_MTD_NAND_ECC_JFFS2 1 /* use JFFS2 ECC */ - -/* address distance between chip selects */ -#define CONFIG_SYS_NAND_SELECT_DEVICE 1 -#define CONFIG_SYS_NAND_CS_DIST 0x200 - -#define CONFIG_SYS_NAND_SIZE 0x8000 -#define CONFIG_SYS_NAND_BASE (CONFIG_SYS_CCSRBAR + 0x03010000) - -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define CONFIG_SYS_NAND_MAX_CHIPS 2 /* Number of chips per device */ - -/* CS3 for NAND Flash */ -#define CONFIG_SYS_BR3_PRELIM ((CONFIG_SYS_NAND_BASE & BR_BA) | \ - BR_PS_8 | BR_MS_UPMB | BR_V) -#define CONFIG_SYS_OR3_PRELIM (P2SZ_TO_AM(CONFIG_SYS_NAND_SIZE) | OR_UPM_BI) - -#define NAND_BIG_DELAY_US 25 /* max tR for Samsung devices */ - -#endif /* CONFIG_NAND */ - -/* - * General PCI - * Addresses are mapped 1-1. - */ -#define CONFIG_SYS_PCI1_MEM_BUS 0x80000000 -#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BUS -#define CONFIG_SYS_PCI1_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCI1_IO_BUS (CONFIG_SYS_CCSRBAR + 0x02000000) -#define CONFIG_SYS_PCI1_IO_PHYS CONFIG_SYS_PCI1_IO_BUS -#define CONFIG_SYS_PCI1_IO_SIZE 0x1000000 /* 16M */ - -#ifdef CONFIG_PCIE1 -/* - * General PCI express - * Addresses are mapped 1-1. - */ -#ifdef CONFIG_TQM_BIGFLASH -#define CONFIG_SYS_PCIE1_MEM_BUS 0xb0000000 -#define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 /* 512M */ -#define CONFIG_SYS_PCIE1_IO_BUS 0xaf000000 -#else /* !CONFIG_TQM_BIGFLASH */ -#define CONFIG_SYS_PCIE1_MEM_BUS 0xc0000000 -#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCIE1_IO_BUS 0xef000000 -#endif /* CONFIG_TQM_BIGFLASH */ -#define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BUS -#define CONFIG_SYS_PCIE1_IO_PHYS CONFIG_SYS_PCIE1_IO_BUS -#define CONFIG_SYS_PCIE1_IO_SIZE 0x1000000 /* 16M */ -#endif /* CONFIG_PCIE1 */ - -#if defined(CONFIG_PCI) - -#define CONFIG_PCI_PNP /* do pci plug-and-play */ - -#define CONFIG_EEPRO100 -#undef CONFIG_TULIP - -#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ -#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */ - -#endif /* CONFIG_PCI */ - - -#define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_TSEC1 1 -#define CONFIG_TSEC1_NAME "TSEC0" -#define CONFIG_TSEC2 1 -#define CONFIG_TSEC2_NAME "TSEC1" -#define TSEC1_PHY_ADDR 2 -#define TSEC2_PHY_ADDR 1 -#define TSEC1_PHYIDX 0 -#define TSEC2_PHYIDX 0 -#define TSEC1_FLAGS TSEC_GIGABIT -#define TSEC2_FLAGS TSEC_GIGABIT -#define FEC_PHY_ADDR 3 -#define FEC_PHYIDX 0 -#define FEC_FLAGS 0 -#define CONFIG_HAS_ETH0 -#define CONFIG_HAS_ETH1 -#define CONFIG_HAS_ETH2 - -#ifdef CONFIG_TQM8548 -/* - * TQM8548 has 4 ethernet ports. 4 ETSEC's. - * - * On the STK85xx Starterkit the ETSEC3/4 ports are on an - * additional adapter (AIO) between module and Starterkit. - */ -#define CONFIG_TSEC3 1 -#define CONFIG_TSEC3_NAME "TSEC2" -#define CONFIG_TSEC4 1 -#define CONFIG_TSEC4_NAME "TSEC3" -#define TSEC3_PHY_ADDR 4 -#define TSEC4_PHY_ADDR 5 -#define TSEC3_PHYIDX 0 -#define TSEC4_PHYIDX 0 -#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC4_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define CONFIG_HAS_ETH3 -#define CONFIG_HAS_ETH4 -#endif /* CONFIG_TQM8548 */ - -/* Options are TSEC[0-1], FEC */ -#define CONFIG_ETHPRIME "TSEC0" - -#if defined(CONFIG_TQM8540) -/* - * TQM8540 has 3 ethernet ports. 2 TSEC's and one FEC. - * The FEC port is connected on the same signals as the FCC3 port - * of the TQM8560 to the baseboard (STK85xx Starterkit). - * - * On the STK85xx Starterkit the X47/X50 jumper has to be set to - * a - d (X50.2 - 3) to enable the FEC port. - */ -#define CONFIG_MPC85XX_FEC 1 -#define CONFIG_MPC85XX_FEC_NAME "FEC" -#endif - -#if defined(CONFIG_TQM8541) || defined(CONFIG_TQM8555) -/* - * TQM8541/55 have 4 ethernet ports. 2 TSEC's and 2 FCC's. Only one FCC port - * can be used at once, since only one FCC port is available on the STK85xx - * Starterkit. - * - * To use this port you have to configure U-Boot to use the FCC port 1...2 - * and set the X47/X50 jumper to: - * FCC1: a - b (X47.2 - X50.2) - * FCC2: a - c (X50.2 - 1) - */ -#define CONFIG_ETHER_ON_FCC -#define CONFIG_ETHER_INDEX 1 /* FCC channel for ethernet */ -#endif - -#if defined(CONFIG_TQM8560) -/* - * TQM8560 has 5 ethernet ports. 2 TSEC's and 3 FCC's. Only one FCC port - * can be used at once, since only one FCC port is available on the STK85xx - * Starterkit. - * - * To use this port you have to configure U-Boot to use the FCC port 1...3 - * and set the X47/X50 jumper to: - * FCC1: a - b (X47.2 - X50.2) - * FCC2: a - c (X50.2 - 1) - * FCC3: a - d (X50.2 - 3) - */ -#define CONFIG_ETHER_ON_FCC -#define CONFIG_ETHER_INDEX 3 /* FCC channel for ethernet */ -#endif - -#if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 1) -#define CONFIG_ETHER_ON_FCC1 -#define CONFIG_SYS_CMXFCR_MASK1 (CMXFCR_FC1 | CMXFCR_RF1CS_MSK | \ - CMXFCR_TF1CS_MSK) -#define CONFIG_SYS_CMXFCR_VALUE1 (CMXFCR_RF1CS_CLK11 | CMXFCR_TF1CS_CLK12) -#define CONFIG_SYS_CPMFCR_RAMTYPE 0 -#define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB) -#endif - -#if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 2) -#define CONFIG_ETHER_ON_FCC2 -#define CONFIG_SYS_CMXFCR_MASK2 (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | \ - CMXFCR_TF2CS_MSK) -#define CONFIG_SYS_CMXFCR_VALUE2 (CMXFCR_RF2CS_CLK16 | CMXFCR_TF2CS_CLK13) -#define CONFIG_SYS_CPMFCR_RAMTYPE 0 -#define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB) -#endif - -#if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 3) -#define CONFIG_ETHER_ON_FCC3 -#define CONFIG_SYS_CMXFCR_MASK3 (CMXFCR_FC3 | CMXFCR_RF3CS_MSK | \ - CMXFCR_TF3CS_MSK) -#define CONFIG_SYS_CMXFCR_VALUE3 (CMXFCR_RF3CS_CLK15 | CMXFCR_TF3CS_CLK14) -#define CONFIG_SYS_CPMFCR_RAMTYPE 0 -#define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB) -#endif - -/* - * Environment - */ -#define CONFIG_ENV_IS_IN_FLASH 1 - -#define CONFIG_ENV_SECT_SIZE 0x40000 /* 256K (one sector) for env */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR - CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - -#define CONFIG_TIMESTAMP /* Print image info with ts */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -#ifdef CONFIG_NAND -/* - * Use NAND-FLash as JFFS2 device - */ -#define CONFIG_CMD_NAND -#define CONFIG_CMD_JFFS2 - -#define CONFIG_JFFS2_NAND 1 - -#ifdef CONFIG_CMD_MTDPARTS -#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ -#define CONFIG_FLASH_CFI_MTD -#define MTDIDS_DEFAULT "nand0=TQM85xx-nand" -#define MTDPARTS_DEFAULT "mtdparts=TQM85xx-nand:-" -#else -#define CONFIG_JFFS2_DEV "nand0" /* NAND device jffs2 lives on */ -#define CONFIG_JFFS2_PART_OFFSET 0 /* start of jffs2 partition */ -#define CONFIG_JFFS2_PART_SIZE 0x200000 /* size of jffs2 partition */ -#endif /* CONFIG_CMD_MTDPARTS */ - -#endif /* CONFIG_NAND */ - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_PING -#define CONFIG_CMD_I2C -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_NFS -#define CONFIG_CMD_SNTP -#ifndef CONFIG_TQM8548_AG -#define CONFIG_CMD_DATE -#endif -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_DTT -#define CONFIG_CMD_MII -#define CONFIG_CMD_REGINFO - -#if defined(CONFIG_PCI) -#define CONFIG_CMD_PCI -#endif - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif - -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buf Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port*/ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ -#endif - -#define CONFIG_LOADADDR 200000 /* default addr for tftp & bootm*/ - -#define CONFIG_BOOTDELAY 5 /* -1 disables auto-boot */ - -#define CONFIG_PREBOOT "echo;" \ - "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ - "echo" - -#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ - - -/* - * Setup some board specific values for the default environment variables - */ -#ifdef CONFIG_CPM2 -#define CONFIG_ENV_CONSDEV "consdev=ttyCPM0\0" -#else -#define CONFIG_ENV_CONSDEV "consdev=ttyS0\0" -#endif -#define CONFIG_ENV_FDT_FILE "fdt_file="MK_STR(CONFIG_HOSTNAME)"/" \ - MK_STR(CONFIG_HOSTNAME)".dtb\0" -#define CONFIG_ENV_BOOTFILE "bootfile="MK_STR(CONFIG_HOSTNAME)"/uImage\0" -#define CONFIG_ENV_UBOOT "uboot="MK_STR(CONFIG_HOSTNAME)"/u-boot.bin\0" \ - "uboot_addr="MK_STR(CONFIG_SYS_TEXT_BASE)"\0" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_ENV_BOOTFILE \ - CONFIG_ENV_FDT_FILE \ - CONFIG_ENV_CONSDEV \ - "netdev=eth0\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs $bootargs " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask" \ - ":$hostname:$netdev:off panic=1\0" \ - "addcons=setenv bootargs $bootargs " \ - "console=$consdev,$baudrate\0" \ - "flash_nfs=run nfsargs addip addcons;" \ - "bootm $kernel_addr - $fdt_addr\0" \ - "flash_self=run ramargs addip addcons;" \ - "bootm $kernel_addr $ramdisk_addr $fdt_addr\0" \ - "net_nfs=tftp $kernel_addr_r $bootfile;" \ - "tftp $fdt_addr_r $fdt_file;" \ - "run nfsargs addip addcons;" \ - "bootm $kernel_addr_r - $fdt_addr_r\0" \ - "rootpath=/opt/eldk/ppc_85xx\0" \ - "fdt_addr_r=900000\0" \ - "kernel_addr_r=1000000\0" \ - "fdt_addr=ffec0000\0" \ - "kernel_addr=ffd00000\0" \ - "ramdisk_addr=ff800000\0" \ - CONFIG_ENV_UBOOT \ - "load=tftp 100000 $uboot\0" \ - "update=protect off $uboot_addr +$filesize;" \ - "erase $uboot_addr +$filesize;" \ - "cp.b 100000 $uboot_addr $filesize" \ - "upd=run load update\0" \ - "" -#define CONFIG_BOOTCOMMAND "run flash_self" - -#endif /* __CONFIG_H */ |