diff options
Diffstat (limited to 'include/configs/omap3_pandora.h')
| -rw-r--r-- | include/configs/omap3_pandora.h | 117 |
1 files changed, 52 insertions, 65 deletions
diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h index b78aacfa08..72b0cc223b 100644 --- a/include/configs/omap3_pandora.h +++ b/include/configs/omap3_pandora.h @@ -1,6 +1,6 @@ /* - * (C) Copyright 2008 - * Grazvydas Ignotas <notasas@gmail.com> + * (C) Copyright 2008-2010 + * GraÅžvydas Ignotas <notasas@gmail.com> * * Configuration settings for the OMAP3 Pandora. * @@ -59,14 +59,24 @@ * Size of malloc() pool */ #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ - /* Sector */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) - /* initial data */ +#define CONFIG_SYS_MALLOC_LEN (1024 * 1024 + CONFIG_ENV_SIZE) /* * Hardware drivers */ +#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 +#define CONFIG_SYS_DEVICE_NULLDEV 1 + +/* USB */ +#define CONFIG_MUSB_UDC 1 +#define CONFIG_USB_OMAP3 1 +#define CONFIG_TWL4030_USB 1 + +/* USB device configuration */ +#define CONFIG_USB_DEVICE 1 +#define CONFIG_USB_TTY 1 + /* * NS16550 Configuration */ @@ -101,11 +111,11 @@ #define CONFIG_CMD_EXT2 /* EXT2 Support */ #define CONFIG_CMD_FAT /* FAT support */ -#define CONFIG_CMD_JFFS2 /* JFFS2 Support */ #define CONFIG_CMD_I2C /* I2C serial bus support */ #define CONFIG_CMD_MMC /* MMC support */ #define CONFIG_CMD_NAND /* NAND support */ +#define CONFIG_CMD_CACHE /* Cache control */ #undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ #undef CONFIG_CMD_FPGA /* FPGA configuration Support */ @@ -141,52 +151,41 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ /* devices */ -#define CONFIG_JFFS2_NAND -/* nand device jffs2 lives on */ -#define CONFIG_JFFS2_DEV "nand0" -/* start of jffs2 partition */ -#define CONFIG_JFFS2_PART_OFFSET 0x680000 -#define CONFIG_JFFS2_PART_SIZE 0xf980000 /* size of jffs2 */ - /* partition */ + +#ifdef CONFIG_CMD_NAND +#define CONFIG_CMD_MTDPARTS +#define CONFIG_MTD_PARTITIONS +#define CONFIG_MTD_DEVICE +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS +#define CONFIG_RBTREE +#define CONFIG_LZO + +#define MTDIDS_DEFAULT "nand0=nand" +#define MTDPARTS_DEFAULT "mtdparts=nand:512k(xloader),"\ + "1920k(uboot),128k(uboot-env),"\ + "10m(boot),-(rootfs)" +#else +#define MTDPARTS_DEFAULT +#endif /* Environment information */ #define CONFIG_BOOTDELAY 1 #define CONFIG_EXTRA_ENV_SETTINGS \ + "usbtty=cdc_acm\0" \ "loadaddr=0x82000000\0" \ - "console=ttyS0,115200n8\0" \ - "videospec=omapfb:vram:2M,vram:4M\0" \ - "mmcargs=setenv bootargs console=${console} " \ - "video=${videospec} " \ - "root=/dev/mmcblk0p2 rw " \ - "rootfstype=ext3 rootwait\0" \ - "nandargs=setenv bootargs console=${console} " \ - "video=${videospec} " \ - "root=/dev/mtdblock4 rw " \ - "rootfstype=jffs2\0" \ - "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \ - "bootscript=echo Running bootscript from mmc ...; " \ - "source ${loadaddr}\0" \ - "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \ - "mmcboot=echo Booting from mmc ...; " \ - "run mmcargs; " \ - "bootm ${loadaddr}\0" \ - "nandboot=echo Booting from nand ...; " \ - "run nandargs; " \ - "nand read ${loadaddr} 280000 400000; " \ - "bootm ${loadaddr}\0" \ + "bootargs=ubi.mtd=4 ubi.mtd=3 root=ubi0:rootfs rootfstype=ubifs " \ + "rw rootflags=bulk_read console=ttyS0,115200n8 " \ + "vram=6272K omapfb.vram=0:3000K\0" \ + "mtdparts=" MTDPARTS_DEFAULT "\0" \ #define CONFIG_BOOTCOMMAND \ - "if mmc init; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loaduimage; then " \ - "run mmcboot; " \ - "else run nandboot; " \ - "fi; " \ - "fi; " \ - "else run nandboot; fi" + "if mmc init && fatload mmc1 0 ${loadaddr} autoboot.scr || " \ + "ext2load mmc1 0 ${loadaddr} autoboot.scr; then " \ + "source ${loadaddr}; " \ + "fi; " \ + "ubi part boot && ubifsmount boot && ubifsload ${loadaddr} uImage && bootm ${loadaddr}" #define CONFIG_AUTO_COMPLETE 1 /* @@ -243,6 +242,14 @@ /* SDRAM Bank Allocation method */ #define SDRC_R_B_C 1 +#define CONFIG_SYS_TEXT_BASE 0x80008000 +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 +#define CONFIG_SYS_INIT_RAM_SIZE 0x800 +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) + /*----------------------------------------------------------------------- * FLASH and environment organization */ @@ -253,40 +260,20 @@ #define PISMO1_NAND_SIZE GPMC_SIZE_128M #define PISMO1_ONEN_SIZE GPMC_SIZE_128M -#define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors on */ - /* one chip */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ #define CONFIG_SYS_FLASH_BASE boot_flash_base /* Monitor at start of flash */ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP #define CONFIG_ENV_IS_IN_NAND 1 -#define ONENAND_ENV_OFFSET 0x240000 /* environment starts here */ -#define SMNAND_ENV_OFFSET 0x240000 /* environment starts here */ +#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ #define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec #define CONFIG_ENV_OFFSET boot_flash_off #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET -/*----------------------------------------------------------------------- - * CFI FLASH driver setup - */ -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ) -#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ) - -/* Flash banks JFFS2 should use */ -#define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \ - CONFIG_SYS_MAX_NAND_DEVICE) -#define CONFIG_SYS_JFFS2_MEM_NAND -/* use flash_info[2] */ -#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS -#define CONFIG_SYS_JFFS2_NUM_BANKS 1 - #ifndef __ASSEMBLY__ extern unsigned int boot_flash_base; extern volatile unsigned int boot_flash_env_addr; |