summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-08-16apalis-tk1/t30: colibri_t30: display reset reasonDominik Sliwa
Display proper reset reason after the SoC info. Signed-off-by: Dominik Sliwa <dominik.sliwa@toradex.com> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com> (cherry picked from commit fbcb9256549453b6e81a9a01ef6475b452c9f1ed)
2019-08-16apalis-tk1: add pcie_aspm=off to defargsIgor Opaniuk
Disabling ASPM fixes incompatibilities with some PCIe cards Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Dominik Sliwa <dominik.sliwa@toradex.com> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com> (cherry picked from commit f7c668a4e8dce3975a7c07834c448584f768a44f)
2019-08-16apalis-tk1: enable user debug by defaultIgor Opaniuk
Let the kernel print some debug messages when a user program crashes due to an exception. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com> (cherry picked from commit 11d96e122a29eab51242b6502dd7ff9cce533fef)
2019-08-16apalis-tk1: provide proper USB vendor idIgor Opaniuk
Use unified values for USB Product/Vendor numbers when the config block is missing Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com> (cherry picked from commit 8fd734c49cc3dd0c5bc57b4922120483688e3099)
2019-08-16apalis-tk1: set apalis gpio 8 aka fan_enIgor Opaniuk
Make sure the Apalis GPIO 8 aka FAN_EN is on when using Apalis TK1 modules. Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Dominik Sliwa <dominik.sliwa@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com> (cherry picked from commit 538ab6c0a1a51da0caf9525607499e8cd6ef12b7)
2019-08-16apalis-tk1: do not explicitly release reset_moci#Marcel Ziswiler
By keeping RESET_MOCI_CTRL low we avoid explicitly releasing RESET_MOCI#. Please note that module hardware versions up to V1.1A will already release RESET_MOCI# in hardware coming out of reset. Please further note that with this change the USB hub on the Apalis Evaluation board is kept in reset in U-Boot and therefore none of its ports are operational in U-Boot. Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com> (cherry picked from commit 5b5de78b4a6ff8c2bbd71a6b51d6fdf32f420eef)
2019-07-16board: toradex: declare consoleargsOleksandr Suvorov
Concept: store all console-related kernel parameters in dedicated variable. Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-07-13colibri-imx6ull: fix vidargsMarcel Ziswiler
Unfortunately, that missing M makes the current downstream NXP BSP 4.14.98_2.0.0_ga crash early during Linux kernel boot. Fix this. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com> Tested-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-07-13toradex: configblock: avoid line continuationsMarcel Ziswiler
Fix issue as reported by checkpatch.pl. Leave long lines as line continuation in text output is not recommended. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-07-13toradex: configblock: fix apalis imx8 targetMarcel Ziswiler
The Apalis iMX8 was missing the interactive part should a customer have bricked his module and want to re-create the configuration block. Fix this. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-07-13toradex: configblock: fix colibri imx8x targetMarcel Ziswiler
The Colibri iMX8X target got re-named late in the cycle which we forgot to reflect here. Furthermore, it was missing the interactive part should a customer have bricked his module and want to re-create the configuration block. Fix this. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-07-13toradex: configblock: generic wi-fi/bt handlingMarcel Ziswiler
Make the interactive Wi-Fi/BT handling generic by pulling it out of the Colibri iMX6ULL interactive part to be re-used for Apalis iMX8 and Colibri iMX8X. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-07-13toradex: configblock: initialize MMC before switching partitionStefan Agner
If the module is in serial downloader mode, we do no longer read the environment from eMMC. Therefor, the eMMC is unitialized when trying to read the config block. Use mmc_init to initialize the selected MMC device before using it. Note: In case the MMC has already been initialized, the mmc_init detects that and returns immediately. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-07-11apalis-tk1: switch to zimageMax Krummenacher
Switch to the generic compressed Kernel image type (zImage) instead of the U-Boot specific uImage format. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
2019-07-09Revert "configs: colibri_imx7: enable CAAM driver"Marcel Ziswiler
While this seems to work on the eMMC SKU, unfortunately, this no longer boots on the raw NAND one. This reverts commit edb411e2e6aeb7214641a53d78d1dc4a943290a0. Conflicts: configs/colibri_imx7_defconfig
2019-07-09apalis/colibri-imx8: reenable CONFIG_IMX_SCU_THERMALMax Krummenacher
This got dropped by a global 'make savedefconfig' resync as required patches are still in flight. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
2019-07-09configs: colibri-imx6ull: switch to DM_VIDEOIgor Opaniuk
Use CONFIG_DM_VIDEO=y by default for Colibri iMX6ULL. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-07-09ARM: dts: colibri-imx6ull: extend lcdif nodeIgor Opaniuk
Provide proper display timings for lcdif node, used by mxsfb DM_VIDEO enabled framebuffer driver. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-07-09colibri-imx6ull: support building with DM_VIDEO=yIgor Opaniuk
1. This fixes linking issues when building with DM_VIDEO enabled mxsfb driver. 2. Provide proper defines for both VIDEO=y and DM_VIDEO=y. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-07-09configs: colibri_imx7: enable DM_VIDEOIgor Opaniuk
Enable DM_VIDEO support for Colibri iMX7 NAND version. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-07-09ARM: dts: colibri_imx7: Fix lcdif node definitionIgor Opaniuk
Fix lcdif DT node and make it conform to the structure defined in the Linux devicetree bindings [1]. Currently there is support only for old style lcdif node definitions. [1] https://www.kernel.org/doc/Documentation/devicetree/bindings/display/mxsfb.txt Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-07-09video: mxsfb: fix mxsfb fbdev binding issuesIgor Opaniuk
Add support for display and bits-per-pixel properties. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-07-09colibri/apalis imx: drop DFU supportIgor Opaniuk
We never really added a sensible DFU configuration for platforms based on eMMC. Most of the things one might want to do can also be done with UMS or fastboot, so drop the DFU configuration. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-07-09colibri/apalis tegra: drop DFU supportIgor Opaniuk
We never really added a sensible DFU configuration for platforms based on eMMC. Most of the things one might want to do can also be done with UMS or fastboot, so drop the DFU configuration. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-07-09colibri_vf: enable DM_VIDEOIgor Opaniuk
Enable DM_VIDEO for Colibri VF. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-07-09ARM: dts: colibri_vf: Add dcu0 nodeIgor Opaniuk
Add dumb node for NXP Display Control Unit0(DCU), which permits DM_ENABLED converted driver to be probed. Currently no display timings are provided in this node. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-07-09video: fsl_dcu_fb: add DM_VIDEO supportIgor Opaniuk
Extend the driver to build with DM_VIDEO enabled. DTS files must additionally include 'u-boot,dm-pre-reloc' property in soc and child nodes to enable driver binding to fsl_dcu_fb device. Currently display timings aren't obtained from DT. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-07-09video: fsl_dcu_fb: refactor init functionsIgor Opaniuk
Move dcu-related code to fsl_dcu_probe_common, keep in video_hw_init() only legacy video stack (filling GraphicPanel struct etc.). Add wrappers for all init functions, that will let to provide struct fb_info as an additional param (needed for further moving it from the global scope to driver private data struct in DM converted driver). Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-07-09imx8: cpu: fix warning for cpu_imx_get_tempIgor Opaniuk
cpu_imx_get_temp() definition is wrapped with a ifdef macro, which leads to warnings if CONFIG_IMX_SCU_THERMAL isn't defined and there are still references to this function, as, for example, in cpu_imx_get_desc(). Drop ifdef as linker will automatically remove the function in case CONFIG_IMX_SCU_THERMAL is not enabled. Fix warning: arch/arm/mach-imx/imx8/cpu.c: In function ‘cpu_imx_get_desc’: arch/arm/mach-imx/imx8/cpu.c:612:40: warning: implicit declaration of function ‘cpu_imx_get_temp’; did you mean ‘cpu_imx_get_desc’? [-Wimplicit-function-declaration] ret = snprintf(buf, size, " at %dC", cpu_imx_get_temp()); ^~~~~~~~~~~~~~~~ cpu_imx_get_desc cpu_imx_get_desc Fixes: 82467cb217 ("imx8: cpu: get temperature when print cpu desc") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-07-09apalis-imx8: enable hdp firmware loadingMarcel Ziswiler
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-07-09MLK-17205-3 video: imx: hdp: Adding configs for HDP firmware loadingOliver Brown
Added default environment for hdp loading. Added hdp loading as default for iMX8QM MEK board. Signed-off-by: Oliver Brown <oliver.brown@nxp.com> (cherry picked from downstream commit 432e5b4347841095c3b5a8a0d106f35deadd006e) (cherry picked from downstream commit cb78a32fa8eb8c37932be003ebe4fa1f8c46c1d5)
2019-07-09MLK-17205-2 video: imx: hdp: Adding HDP firmware loading to the buildOliver Brown
Adding the HDP firmware loading to the build. Signed-off-by: Oliver Brown <oliver.brown@nxp.com> (cherry picked from downstream commit d4702582552aa1921fce58329ae40c24481fba3a)
2019-07-09MLK-17205-1 video: imx: hdp: Adding support for HDP firmware loadingOliver Brown
This adds a command to load the HDP firmware and supporting libraries. Signed-off-by: Oliver Brown <oliver.brown@nxp.com> (cherry picked from downstream commit 94c9c7022c5b6cffb74bb2e34336cffc2790d0d8) (cherry picked from downstream commit 21edff320e763585ebc6ab2d997c994561b69292)
2019-07-09apalis-imx8: enable of_system_setupMarcel Ziswiler
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-07-09MLK-16560-1: imx8: Configure sids based on iommu properties in dtbYe Li
Use streamids specified in dtb because they need to match anyway. This removes the need to rebuild uboot for stream id assignments. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Acked-by: Peng Fan <peng.fan@nxp.com> (cherry picked from downstream commit 3caa05e6dc973b8710642f27f834bf022fbb65b4)
2019-07-09MLK-16087 imx8qm/qxp: Disable kernel FDT nodes for the resources are not ownedYe Li
Before starting the kernel, need to check if the enabled nodes (resources) in FDT are owned by current partition. If it is not owned, need to disable it because A core can't access it. We use the node's power-domain property to get the PD node which has the SCFW resource id in its reg property. Then we can check it with SCFW. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from downstream commit 358372674b29685788a4007b0944ab03b7fafc13)
2019-07-09apalis-imx8: enable smmu setupMarcel Ziswiler
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-07-09MLK-14938-8 imx8: Add SMMU setup to Soc codesYe Li
We setup SMMU in arch_preboot_os to avoid breaking u-boot driver. Add a kconfig entry CONFIG_IMX_SMMU to enable it. So far, the USDHC0-USDHC1 and FEC0-FEC1 are added into sid. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from downstream commit 7da6345919ee59a26cf65b4bc29072eea2fc0909) (cherry picked from downstream commit 45308e7da90f342c2de7fbec1f8c5b8bd3f1b8e5)
2019-07-09misc: imx8: add sc_rm_set_master_sidMarcel Ziswiler
Add sc_rm_set_master_sid to support setting stream IDs. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-07-09imx: imx8dx/qxp: enable thermalPeng Fan
Add thermal dts node Enable thermal in defconfig Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-09thermal: add i.MX8 thermal driverPeng Fan
Add i.MX8 thermal driver to support get temperature from SCU. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-09misc: imx8: add sc_misc_get_tempPeng Fan
Add sc_misc_get_temp to support get temperature Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-08Prepare v2019.07v2019.07Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-07-08Merge tag 'mips-fixes-for-2019.07' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-mips - mtmips: network stability fixes for gardena-smart-gateway
2019-07-07arm: mediatek: remove arch_misc_initWeijie Gao
The watchdog of mediatek chips is enabled by bootrom before u-boot is running. Previously we choose to enable the wdt driver only to disable the watchdog hardware. Now wdt service is enabled by default. The function arch_misc_init which is only used to disable wdt is no longer needed. Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-07-07board_r: move initr_watchdog to be called after initr_serialWeijie Gao
The initr_watchdog is currently placed before initr_serial. The initr_watchdog calls printf and printf finally calls ops->putc of a serial driver. However, gd->cur_serial_dev points to a udevice allocated in board_f. The gd->cur_serial_dev->driver->ops->putc points the the code region before relocation. Some serial drivers call WATCHDOG_RESET() in ops->putc. When DM is enabled for watchdog, watchdog_reset() is called. watchdog_reset() calls get_timer to get current timer. On some platforms the timer driver is also a DM driver. initr_watchdog is placed right after initr_dm, which means the timer driver hasn't been initialized. So dm_timer_init() is called. To create a new udevice, calloc is called. However start from ops->putc, u-boot execution flow is redirected into the memory region before relocation (board_f). In board_f, dlmalloc hasn't been initialized. The call to calloc will fail, and this will cause DM to print out an error message, and it will call printf again, causing recursive error outputs. This patch places initr_watchdog after initr_serial to solve this issue. Cc: Stefan Roese <sr@denx.de> Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> Reviewed-by: Stefan Roese <sr@denx.de> Tested-by: Frank Wunderlich <frank-w@public-files.de> Tested-by: Suniel Mahesh <sunil.m@techveda.org>
2019-07-07Merge tag 'dm-pull-7jul19' of https://gitlab.denx.de/u-boot/custodians/u-boot-dmTom Rini
Fix booting for wandboard
2019-07-07Merge tag 'video-for-2019.07' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-video - fix pwm backlight
2019-07-07imx6: wandboard: allow booting from MMC 2Heinrich Schuchardt
One of the SD-CARD slots on the Wandboard Quad B1 is MMC 2. Enable it as a boot device. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-07-07Merge https://gitlab.denx.de/u-boot/custodians/u-boot-usbTom Rini
- DWC and i.MX6 fixes
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-13 13:39:55 +0000