summaryrefslogtreecommitdiff
path: root/board
AgeCommit message (Collapse)Author
2021-06-23toradex: use TEZI distro boot scriptMarcel Ziswiler
The distro boot script in TEZI image is called boot-tezi.scr. Enable using this particular script name for u-boot images which are used as a part of TEZI. Related-to: TEI-791 Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2021-06-14toradex: enable using another distro boot script for TEZIOleksandr Suvorov
The distro boot script for TEZI has another name to prevent u-boot of regular BSP trying to boot TEZI image. Expand the usage of TDX_EASY_INSTALLER Kconfig option to seek and use the TEZI-specific name of the script. Related-to: TEI-791 Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2021-06-11toradex: add easy installer configurabilityMarcel Ziswiler
Allow setting Toradex Easy Installer aka Tezi specific configuration options like not enabling SATA, directly continuing with the SDP command upon recovery, distrobooting otherwise or not storing the environment. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Stefan Agner <stefan.agner@toradex.com> (cherry picked from commit 8b2f82e2aca52bac5b67fbeddccef2dd44f21444) Conflicts: board/toradex/common/Kconfig added it on the end of the file and reworded the Kconfig entry so it reflects what it is used for in this U-Boot. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
2021-06-01apalis-tk1: launch toradex easy installer in usb recoveryMarcel Ziswiler
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2021-05-30colibri_imx6: add board_fit_config_name_match to support FIT in SPLMing Liu
Only one dtb is currently supported, so match with imx6-colibri. Related-to: TOR-1704 Signed-off-by: Ming Liu <ming.liu@toradex.com>
2021-05-26colibri-imx7: full support of tezi-recovery imageOleksandr Suvorov
The recovery image needs to support both Colibri-iMX7 NAND and Colibri-iMX7 eMMC modules. Forward port the solution for this from u-boot 2016.11, originally developed by Stefan Agner <stefan.agner@toradex.com>. Related-to: TEI-775 Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2021-05-19board: colibri_vf: fix compiling warningOleksandr Suvorov
This patch fixes the following compiler warning: ============= board/toradex/colibri_vf/colibri_vf.c: In function 'ft_board_setup': board/toradex/colibri_vf/colibri_vf.c:436:6: warning: unused variable 'ret' [-Wunused-variable] ============= Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2021-05-12toradex: make USB PID from config block optionalStefan Agner
If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Brandon Shibley <brandon.shibley@toradex.com> (cherry-picked from commit f72fe627c3e7a97008b8dd5d9ceb6df1dcd347ee) Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2021-05-12colibri_imx7: use SDP if USB serial downloader has been usedStefan Agner
In case USB serial downloader has been used to load U-Boot start the serial download protocol (SDP) emulation. This allows to download complete images such as Toradex Easy Installer over USB SDP as well. This code uses the boot ROM provided boot information to reliably detect USB serial downloader. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> (cherry-picked from a2e77a650a496e2be0b1630b874f531e9f394d47) Forward-ported to 2020.07: Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2021-04-01apalis_imx6: fix module revision in config blockDenys Drozdov
U-boot might display wrong module revision information for modules with an assembly version 'K'. "cfgblock create" does not takes into account all revision digits from PID8. This fix takes into account 6th,7th digits of PID8 to store module revision. Related-to: ELB-3893 Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com>
2020-08-28colibri_imx7: wrap video specific defines if DM_VIDEO ifdefsIgor Opaniuk
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-08-28toradex: drop legacy show_boot_logo function and use splashscreenIgor Opaniuk
Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-08-28colibri_imx7: use splashcreen value instead of legacy functionIgor Opaniuk
Set proper splashscreen env value instead of calling legacy function to show embed boot logo. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-08-28colibri-imx6ull: use splashcreen value instead of legacy functionIgor Opaniuk
Set proper splashscreen env value instead of calling legacy function to show embed boot logo. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-07-20verdin-imx8mm: add EEPROM support for carrier boardIgor Opaniuk
Enable these Kconfig symbols: TDX_CFG_BLOCK_EXTRA=y TDX_HAVE_EEPROM_EXTRA=y Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-07-20toradex: tdx-cfg-block: add carrier board info printingIgor Opaniuk
Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-07-20toradex: tdx-cfg-clock: add migration routine from PID8Igor Opaniuk
Add migration routine from PID8 pre-stored values on EEPROM (including sane value checks). Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-07-20toradex: tdx-cfg-block: add support for EEPROMIgor Opaniuk
This introduces support for EEPROM as a storage for the main Toradex config block and additional config blocks on extra EEPROM chips (on carrier board or video adapters). To enable EEPROM as a storage for the main config block: TDX_HAVE_EEPROM=y. For additional EEPROMs please enable this Kconfig symbol: TDX_CFG_BLOCK_EXTRA=y. Information about existing EEPROM chips is provided via Device Tree using aliases. You can also write configuration for the carrier board using create_carrier subcommand for cfgblock. Example: Verdin iMX8MM # cfgblock create_carrier Supported carrier boards: UNKNOWN CARRIER = [0] Verdin Carrier Board = [1] Choose your carrier board (provide ID): 1 Enter carrier board version (e.g. V1.1B): V1.0A Enter carrier board serial number: 10622780 Also with barcode: Verdin iMX8MM # cfgblock create carrier -y 0156100010622780 Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-07-20toradex: tdx-cfg-block: add carrier boards and display adaptersIgor Opaniuk
Add defines for supported carrier boards and display adapters. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-07-20toradex: tdx-cfg-block: add EEPROM read/store wrappersIgor Opaniuk
These functions wrap functionality for storing config blocks in EEPROM. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-07-15colibri-imx7: fix splash logo drawingIgor Opaniuk
1. Configure white on black for video console. 2. Enable printing bmp logo during late board init stage. 3. Use iomux configuration from device tree. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-07-15colibri-imx6ull: show boot logoIgor Opaniuk
1. Show boot logo embed in U-Boot blob. 2. Drop iomux configration for LCD, and use the one provided in device tree. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-07-15ARM: dts: imx7-colibri: multiple node updatesIgor Opaniuk
1. Move u-boot specific nodes to u-boot dts include: legacy lcdif node and aliases. 2. Add iomux configuration for LCD. 3. Drop un-needed u-boot,dm-pre-reloc for alias node. 4. Fix display-timings, use the one from Toradex downstream kernel [1] [1]: https://git.toradex.com/cgit/linux-toradex.git/tree/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi?h=toradex_4.9-2.3.x-imx#n206 Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-07-15toradex: common: show boot logoIgor Opaniuk
Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-07-03riscv: sifive: fu540: enable all cache ways from U-Boot properPragnesh Patel
Add L2 cache node to enable all cache ways from U-Boot proper. Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-03riscv: sifive: fu540: Add gpio-restart supportBin Meng
The HiFive Unleashed board wires GPIO pin#10 to the input of the system reset signal. This adds gpio reboot support. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Sagar Kadam <sagar.kadam@sifive.com> Tested-by: Sagar Kadam <sagar.kadam@sifive.com> Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com>
2020-06-23mx6cuboxi: remove unused codeWalter Lozano
After enabling SPL_OF_CONTROL, SPL_DM and SPL_DM_MMC the MMC initialization code is not longer needed. This patch removes the unused code. Signed-off-by: Walter Lozano <walter.lozano@collabora.com>
2020-06-23mx6cuboxi: customize board_boot_order to access eMMCWalter Lozano
In SPL legacy code only one MMC device is created, based on BOOT_CFG register, which can be either SD or eMMC. In this context board_boot_order return always MMC1 when configure to boot from SD/eMMC. After switching to DM both SD and eMMC devices are created based on the information available on DT, but as board_boot_order only returns MMC1 is not possible to boot from eMMC. This patch customizes board_boot_order taking into account BOOT_CFG register to point to correct MMC1 / MMC2 device. Additionally, handle IO mux for the desired boot device. Signed-off-by: Walter Lozano <walter.lozano@collabora.com>
2020-06-22imx: imx8qm_rom7720_a1: update READMEOliver Graute
Update README to extract firmware from scripts Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
2020-06-22ARM: imx6: Fetch MAC address in board_init_late() on DH iMX6 PDK2Marek Vasut
This is needed to obtain the MAC from EEPROM/OTP only after the final env is populated, otherwise the ethaddr might be overriden. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Claudius Heine <ch@denx.de> Cc: Harald Seiler <hws@denx.de> Cc: Ludwig Zenz <lzenz@dh-electronics.com> Cc: Stefano Babic <sbabic@denx.de>
2020-06-22arm: wandboard: move CONFIG_MXC_UART to defconfigHeinrich Schuchardt
For using a debug UART on the Wandboard CONFIG_MXC_UART=y must be set in the .config file. To avoid duplicate definitions move the setting from include/configs/wandboard.h to configs/wandboard_defconfig. Document the debug UART settings in the README. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-06-22Fix MMC access on SabreliteMartyn Welch
It appears that MMC access on the Sabrelite has been broken since cdcaee9518: Loading Environment from MMC... Card did not respond to voltage select! *** Warning - No block device, using default environment Remove the board_mmc_init() and related entries now that we should be using DM_MMC, add PINCTRL so that things work as expected. Signed-off-by: Martyn Welch <martyn.welch@collabora.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Tested-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Troy Kisky <troy.kisky@boundarydevices.com>
2020-06-22mx6cuboxi: Convert to DM_ETHFabio Estevam
Migration to DM_ETH is mandatory, so convert mx6cuboxi to Ethernet Driver Model. This also brings the benefit of restoring Ethernet functionality. Reported-by: Tom Rini <trini@konsulko.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Tested-by: Tom Rini <trini@konsulko.com>
2020-06-19Merge https://gitlab.denx.de/u-boot/custodians/u-boot-tegraTom Rini
2020-06-18colibri_t20: change maintainerIgor Opaniuk
Take over maintainership for Colibri T20 module. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Acked-by: Lucas Stach <dev@lynxeye.de>
2020-06-18board: amlogic: add board doc files to MAINTAINERSNeil Armstrong
Add the recently added reStructuredText board documentation in the appropriate MAINTAINERS files. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-06-18board: amlogic: move boards doc into doc/board/amlogicNeil Armstrong
Move the natural text Amlogic board README files to doc/board/amlogic into reStructuredText and : - add reStructuredText markup for bash code - fix secondary titles markup - move board support into global support matrix Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-06-15trivial: Fix booot occurencesMichal Simek
s/booot/boot/g The first ase is booot instead of boot and second u-booot instead of u-boot. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-06-11arm: Remove pcm051 boardJagan Teki
OF_CONTROL, DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Acked-by: Lars Poeschel <poeschel@lemonage.de> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-06-11arm: Remove omap3_pandora_defconfig boardJagan Teki
OF_CONTROL, DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Acked-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-06-09Merge tag 'u-boot-imx-20200609' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx Fixes for 2020.07 ----------------- - mx53: mx53menlo Convert to DM_ETH, fix fail boot - imx8mp_evk: fix boot issue - MX6, display5: fix environment - drop warnings (watchdog) for i.MX8mm i.mx8mp - enable bootaux for i.MX8M Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/695929999
2020-06-08Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xxTom Rini
- DM_ETH support for P2041RDB, T1024RDB, P5040DS, P3041DS, P4080DS, bug fixes - Add TBI PHY access through MII - DDR: Rework errata workaround for A008109, A008378, 009942
2020-06-08ARM: imx: m53menlo: Do not fail boot on invalid splash screenMarek Vasut
None of these splash screen loading errors are so critical as to justify complete failure to boot, so just print error message as needed and return 0, the boot can very likely continue without the splash. Fix a couple of missing free(dst) instances as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP i.MX U-Boot Team <uboot-imx@nxp.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2020-06-08imx8mp_evk: spl: no need the code since spl framework could do thatPeng Fan
We no need invoke the code, since spl framework could help us do that. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Fabio Estevam <festevam@gmail.com>
2020-06-08imx8mp_evk: spl: use spl_early_initPeng Fan
Use spl_early_init to replace spl_init, spl_init will be invoked in board_init_r, we only need use spl_early_init to setup malloc and scan early dt. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Fabio Estevam <festevam@gmail.com>
2020-06-08imx8mp_evk: spl: drop timer_initPeng Fan
timer_init has been invoked in arch_cpu_init, no need to invoke it again in board code. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Fabio Estevam <festevam@gmail.com>
2020-06-08imx8mp_evk: spl: drop useless codePeng Fan
Drop useless getting ccm device, there is no need to explicted do this in board code, and we not enable SPL CLK currently. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Fabio Estevam <festevam@gmail.com>
2020-06-08imx8mp_evk: Add a README fileFabio Estevam
Add a README file explaining the U-Boot build and SD card flash procedures. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2020-06-07rockchip: puma: drop special handling of usb host regulatorHeiko Stuebner
With the current usb stack in u-boot, all host ports on puma work flawlessly without any additional special handling, so drop that usb hub hacking from the puma board. Tested with mass-storage and usb-ethernet on both usb3 and usb2 ports. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2020-06-07rockchip: puma: remove separate fit generatorHeiko Stuebner
The introduction of the puma-specific generator was mainly a way to split the pmu firmware from the ATF binary and not having to distribute that 4GB (sparse) image that was created before moving to the bl31.elf as base. Looking at the publically available repository for that separate pmu firmware https://git.theobroma-systems.com/rk3399-cortex-m0.git/ there is also no activity for 3 years and apart from some build customizations no other changes were done. And even then, if changes need to be made, this can very well also happen in the atf context itself, so there is no real need to diverge from the established build procedure and we can just go back to using the main make_fit_atf.py script. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-11 09:53:15 +0000