summaryrefslogtreecommitdiff
path: root/drivers/pwm
AgeCommit message (Collapse)Author
2019-05-01rockchip: use 'arch-rockchip' as header file pathKever Yang
Rockchip use 'arch-rockchip' instead of arch-$(SOC) as common header file path, so that we can get the correct path directly. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-10-24pwm: sunxi: choose best prescaler to improve PWM resolutionVasily Khoruzhick
Choose best prescaler to improve PWM resolution. Without this change driver chooses first prescaler that gives us period value within range, but it could be not the best one. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Tested-by: Vagrant Cascadian <vagrant@debian.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-10-24pwm: sunxi: use new prescaler when configuring PWMVasily Khoruzhick
Looks like old prescaler was used when configuring PWM, fix it. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-10-24pwm: sunxi: fix off-by-one that prevented PWM to use prescaler bypassVasily Khoruzhick
Fix off-by-one that prevented PWM driver to use prescaler bypass. Without this change prescaler is always enabled. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-10-09test: panel: Add a test for the panel uclassSimon Glass
At present this uclass has no tests. Add a simple one which checks the PWM configuration, regulator and GPIO. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-05-15pwm: sunxi: add support for PWM found on Allwinner A64Vasily Khoruzhick
This commit adds basic support for PWM found on Allwinner A64. It can be used for pwm_backlight driver (e.g. for Pinebook) Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
2018-05-07SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-27Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTRTom Rini
We have a large number of places where while we historically referenced gd in the code we no longer do, as well as cases where the code added that line "just in case" during development and never dropped it. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-03-13rockchip: pwm: convert to use live dtKever Yang
use live dt api to get base addr Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-20pwm: imx: Enable PWM support on i.MX53Martyn Welch
Add missing parts for i.MX53 PWM support Acked-by: Nandor Han <nandor.han@ge.com> Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
2017-07-28dm: tegra: pwm: Convert to livetreeSimon Glass
Update the tegra pwm driver to support a live device tree. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-on: Beaver, Jetson-TK1 Tested-by: Stephen Warren <swarren@nvidia.com>
2017-07-27rockchip: pwm: add mask for config settingKever Yang
Use mask to clear old setting before direct set the new config, or else there it will mess up the config when it's not the same with default value. Fixes: 3851059 rockchip: Setup default PWM flags Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-06-09rockchip: Setup default PWM flagsSimon Glass
At present if the Signed-off-by: Simon Glass <sjg@chromium.org> Fixes: 874ee59 (rockchip: pwm: implement pwm_set_invert())
2017-06-01dm: Rename dev_addr..() functionsSimon Glass
These support the flat device tree. We want to use the dev_read_..() prefix for functions that support both flat tree and live tree. So rename the existing functions to avoid confusion. In the end we will have: 1. dev_read_addr...() - works on devices, supports flat/live tree 2. devfdt_get_addr...() - current functions, flat tree only 3. of_get_address() etc. - new functions, live tree only All drivers will be written to use 1. That function will in turn call either 2 or 3 depending on whether the flat or live tree is in use. Note this involves changing some dead code - the imx_lpi2c.c file. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-10dm: sandbox: pwm: add test for pwm_set_invert()Kever Yang
Add test case for new interface set_invert(). Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org> Fix typo in subject and build error in sandbox_pwm_set_invert(): Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-10rockchip: pwm: implement pwm_set_invert()Kever Yang
Rockchip pwm need to init polarity, implement pwm_set_invert() to do it. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
2017-05-10power: regulator: pwm: support pwm polarity settingKever Yang
The latest kernel PWM drivers enable the polarity settings. When system run from U-Boot to kerenl, if there are differences in polarity set or duty cycle, the PMW will re-init: close -> set polarity and duty cycle -> enable the PWM. The power supply controled by pwm regulator may have voltage shaking, which lead to the system not stable. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
2017-04-27dm: sandbox: pwm: Add a basic pwm testSimon Glass
Unfortunately a test for the PWM uclass was not included when it was submitted. This was noticed when trying to add more functionality: http://patchwork.ozlabs.org/patch/748172/ Add a simple test to get us started. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-02-08pwm: remove unneeded ifdef CONFIG_DM_PWM ... endifMasahiro Yamada
Both CONFIG_PWM_TEGRA and CONFIG_PWM_EXYNOS depend on CONFIG_DM_PWM, i.e. they are already guarded by Kconfig correctly. Remove unneeded ifdef CONFIG_DM_PWM ... endif. While we are here, let's tidy up alignment and sort the lines alphabetically in Makefile. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-11-29pwm: imx: increase support up to PWM8 for i.MX6SXChristoph Fritz
This patch increases supported PWMs from previously PWM4 now up to PWM8 if i.MX6SX is in use. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
2016-10-06PWM: Correct misspellings of "module" in context of PWMRobert P. J. Day
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Acked-by: Heiko Schocher <hs@denx.de>
2016-09-22rk_pwm: remove grf setting code from driverKever Yang
We consider the grf setting for pwm controller select as the system operation instead of driver operation, move it to soc init, let's remove it from pwm driver first. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-09-22rk_pwm: use clock framework API to get module clockKever Yang
This patch use clock API instead of hardcode for get pwm clock. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org> Fix printf() to debug() nit: Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-25exynos: pwm: Add a driver for the exynos5 PWMSimon Glass
This driver supports the standard PWM API. There are 5 PWMs. Four are used normally and the last is normally used as a timer. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2016-02-16tegra: video: Move LCD driver to use the DM PWM driverSimon Glass
Use the driver-model PWM driver in preference to the old code. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-02-16tegra: Convert CONFIG_PWM_TEGRA to KconfigSimon Glass
Move this option to Kconfig and clean up the header files. Adjust the only user (the LCD driver) to work with the new driver. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-02-16tegra: pwm: Add a driver for the tegra PWMSimon Glass
This PWM supports four channels. The driver always uses the 32KHz clock, and adjusts the duty cycle accordingly. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-01-21pwm: rockchip: Add a PWM driver for Rockchip SoCsSimon Glass
Add a simple driver which implements the standard PWM uclass interface. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-21dm: pwm: Add a PWM uclassSimon Glass
Add a uclass that supports Pulse Width Modulation (PWM) devices. It provides methods to enable/disable and configure the device. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-05-26pwm: imx: Remove unreachable codeAxel Lin
The break after return is unreachable code, remove it. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Stefano Babic <sbabic@denx.de> Acked-by: Heiko Schocher <hs@denx.de>
2015-05-26pwm: imx: Prevent NULL pointer dereferenceAxel Lin
pwm_id_to_reg() can return NULL, so add NULL testing to prevent NULL pointer dereference. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Stefano Babic <sbabic@denx.de> Acked-by: Heiko Schocher <hs@denx.de>
2015-05-15bugfix i.mx6 pwm: prevent overflow of period_c * duty_nsBrecht Neyrinck
Prevent overflow by casting duty_ns to ull first. This bug came up when trying to create a 200 Hz PWM Signed-off-by: Brecht Neyrinck <bnrn@psicontrol.com> Acked-by: Heiko Schocher<hs@denx.de>
2014-07-23pwm, imx6: add support for pwm modul on imx6Heiko Schocher
add basic support for the pwm modul found on imx6. Pieces of this code are based on linux code from drivers/pwm/pwm-imx.c Commit "cd3de83f1476 Linux 3.16-rc4" Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Stefano Babic <sbabic@denx.de> Cc: Wolfgang Denk <wd@denx.de>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-10 04:19:12 +0000