From a94bb7a42c0c377bd4eecc8aec1ef454c9bad51a Mon Sep 17 00:00:00 2001 From: Sanchayan Maity Date: Wed, 15 Apr 2015 16:24:27 +0530 Subject: usb: host: Add ehci-vf USB driver for ARM Vybrid SoC's This driver adds support for the USB peripheral on Freescale Vybrid SoC's. Signed-off-by: Sanchayan Maity --- arch/arm/include/asm/arch-vf610/crm_regs.h | 10 ++ arch/arm/include/asm/arch-vf610/imx-regs.h | 4 + arch/arm/include/asm/imx-common/regs-usbphy.h | 26 ++++ drivers/usb/host/Makefile | 1 + drivers/usb/host/ehci-vf.c | 164 ++++++++++++++++++++++++++ 5 files changed, 205 insertions(+) create mode 100644 arch/arm/include/asm/imx-common/regs-usbphy.h create mode 100644 drivers/usb/host/ehci-vf.c diff --git a/arch/arm/include/asm/arch-vf610/crm_regs.h b/arch/arm/include/asm/arch-vf610/crm_regs.h index 78708e22ac3..bc6db2a5a55 100644 --- a/arch/arm/include/asm/arch-vf610/crm_regs.h +++ b/arch/arm/include/asm/arch-vf610/crm_regs.h @@ -189,6 +189,7 @@ struct anadig_reg { #define CCM_REG_CTRL_MASK 0xffffffff #define CCM_CCGR0_UART0_CTRL_MASK (0x3 << 14) #define CCM_CCGR0_UART1_CTRL_MASK (0x3 << 16) +#define CCM_CCGR1_USBC0_CTRL_MASK (0x3 << 8) #define CCM_CCGR1_PIT_CTRL_MASK (0x3 << 14) #define CCM_CCGR1_WDOGA5_CTRL_MASK (0x3 << 28) #define CCM_CCGR2_QSPI0_CTRL_MASK (0x3 << 8) @@ -207,14 +208,23 @@ struct anadig_reg { #define CCM_CCGR6_OCOTP_CTRL_MASK (0x3 << 10) #define CCM_CCGR6_DDRMC_CTRL_MASK (0x3 << 28) #define CCM_CCGR7_SDHC1_CTRL_MASK (0x3 << 4) +#define CCM_CCGR7_USBC1_CTRL_MASK (0x3 << 8) #define CCM_CCGR9_FEC0_CTRL_MASK 0x3 #define CCM_CCGR9_FEC1_CTRL_MASK (0x3 << 2) #define CCM_CCGR10_NFC_CTRL_MASK 0x3 +#define ANADIG_PLL7_CTRL_BYPASS (1 << 16) +#define ANADIG_PLL7_CTRL_ENABLE (1 << 13) +#define ANADIG_PLL7_CTRL_POWERDOWN (1 << 12) +#define ANADIG_PLL7_CTRL_DIV_SELECT (1 << 1) #define ANADIG_PLL5_CTRL_BYPASS (1 << 16) #define ANADIG_PLL5_CTRL_ENABLE (1 << 13) #define ANADIG_PLL5_CTRL_POWERDOWN (1 << 12) #define ANADIG_PLL5_CTRL_DIV_SELECT 1 +#define ANADIG_PLL3_CTRL_BYPASS (1 << 16) +#define ANADIG_PLL3_CTRL_ENABLE (1 << 13) +#define ANADIG_PLL3_CTRL_POWERDOWN (1 << 12) +#define ANADIG_PLL3_CTRL_DIV_SELECT (1 << 1) #define ANADIG_PLL2_CTRL_ENABLE (1 << 13) #define ANADIG_PLL2_CTRL_POWERDOWN (1 << 12) #define ANADIG_PLL2_CTRL_DIV_SELECT 1 diff --git a/arch/arm/include/asm/arch-vf610/imx-regs.h b/arch/arm/include/asm/arch-vf610/imx-regs.h index bf419711481..a7d765af359 100644 --- a/arch/arm/include/asm/arch-vf610/imx-regs.h +++ b/arch/arm/include/asm/arch-vf610/imx-regs.h @@ -52,6 +52,7 @@ #define SAI2_BASE_ADDR (AIPS0_BASE_ADDR + 0x00031000) #define SAI3_BASE_ADDR (AIPS0_BASE_ADDR + 0x00032000) #define CRC_BASE_ADDR (AIPS0_BASE_ADDR + 0x00033000) +#define USBC0_BASE_ADDR (AIPS0_BASE_ADDR + 0x00034000) #define PDB_BASE_ADDR (AIPS0_BASE_ADDR + 0x00036000) #define PIT_BASE_ADDR (AIPS0_BASE_ADDR + 0x00037000) #define FTM0_BASE_ADDR (AIPS0_BASE_ADDR + 0x00038000) @@ -65,6 +66,8 @@ #define QSPI0_BASE_ADDR (AIPS0_BASE_ADDR + 0x00044000) #define IOMUXC_BASE_ADDR (AIPS0_BASE_ADDR + 0x00048000) #define ANADIG_BASE_ADDR (AIPS0_BASE_ADDR + 0x00050000) +#define USB_PHY0_BASE_ADDR (AIPS0_BASE_ADDR + 0x00050800) +#define USB_PHY1_BASE_ADDR (AIPS0_BASE_ADDR + 0x00050C00) #define SCSC_BASE_ADDR (AIPS0_BASE_ADDR + 0x00052000) #define ASRC_BASE_ADDR (AIPS0_BASE_ADDR + 0x00060000) #define SPDIF_BASE_ADDR (AIPS0_BASE_ADDR + 0x00061000) @@ -84,6 +87,7 @@ #define DDR_BASE_ADDR (AIPS1_BASE_ADDR + 0x0002E000) #define ESDHC0_BASE_ADDR (AIPS1_BASE_ADDR + 0x00031000) #define ESDHC1_BASE_ADDR (AIPS1_BASE_ADDR + 0x00032000) +#define USBC1_BASE_ADDR (AIPS1_BASE_ADDR + 0x00034000) #define ENET_BASE_ADDR (AIPS1_BASE_ADDR + 0x00050000) #define ENET1_BASE_ADDR (AIPS1_BASE_ADDR + 0x00051000) #define NFC_BASE_ADDR (AIPS1_BASE_ADDR + 0x00060000) diff --git a/arch/arm/include/asm/imx-common/regs-usbphy.h b/arch/arm/include/asm/imx-common/regs-usbphy.h new file mode 100644 index 00000000000..220e45f344d --- /dev/null +++ b/arch/arm/include/asm/imx-common/regs-usbphy.h @@ -0,0 +1,26 @@ +/* + * Freescale USB PHY Register Definitions + * + * SPDX-License-Identifier: GPL-2.0+ + * + */ + +#ifndef __REGS_USBPHY_H__ +#define __REGS_USBPHY_H__ + +#define USBPHY_CTRL 0x00000030 +#define USBPHY_CTRL_SET 0x00000034 +#define USBPHY_CTRL_CLR 0x00000038 +#define USBPHY_CTRL_TOG 0x0000003C +#define USBPHY_PWD 0x00000000 +#define USBPHY_TX 0x00000010 +#define USBPHY_RX 0x00000020 +#define USBPHY_DEBUG 0x00000050 + +#define USBPHY_CTRL_ENUTMILEVEL2 (1 << 14) +#define USBPHY_CTRL_ENUTMILEVEL3 (1 << 15) +#define USBPHY_CTRL_OTG_ID (1 << 27) +#define USBPHY_CTRL_CLKGATE (1 << 30) +#define USBPHY_CTRL_SFTRST (1 << 31) + +#endif /* __REGS_USBPHY_H__ */ diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 7658f873e0a..3b57e565533 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -44,6 +44,7 @@ obj-$(CONFIG_USB_EHCI_SUNXI) += ehci-sunxi.o obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o obj-$(CONFIG_USB_EHCI_UNIPHIER) += ehci-uniphier.o obj-$(CONFIG_USB_EHCI_VCT) += ehci-vct.o +obj-$(CONFIG_USB_EHCI_VF) += ehci-vf.o obj-$(CONFIG_USB_EHCI_RMOBILE) += ehci-rmobile.o obj-$(CONFIG_USB_EHCI_ZYNQ) += ehci-zynq.o diff --git a/drivers/usb/host/ehci-vf.c b/drivers/usb/host/ehci-vf.c new file mode 100644 index 00000000000..54548554df3 --- /dev/null +++ b/drivers/usb/host/ehci-vf.c @@ -0,0 +1,164 @@ +/* + * Copyright (c) 2015 Sanchayan Maity + * Copyright (C) 2015 Toradex AG + * + * Based on ehci-mx6 driver + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "ehci.h" + +#define USB_NC_REG_OFFSET 0x00000800 + +#define ANADIG_PLL_CTRL_EN_USB_CLKS (1 << 6) + +#define UCTRL_OVER_CUR_POL (1 << 8) /* OTG Polarity of Overcurrent */ +#define UCTRL_OVER_CUR_DIS (1 << 7) /* Disable OTG Overcurrent Detection */ + +/* USBCMD */ +#define UCMD_RUN_STOP (1 << 0) /* controller run/stop */ +#define UCMD_RESET (1 << 1) /* controller reset */ + +static const unsigned phy_bases[] = { + USB_PHY0_BASE_ADDR, + USB_PHY1_BASE_ADDR, +}; + +static const unsigned nc_reg_bases[] = { + USBC0_BASE_ADDR, + USBC1_BASE_ADDR, +}; + +static void usb_internal_phy_clock_gate(int index) +{ + void __iomem *phy_reg; + + phy_reg = (void __iomem *)phy_bases[index]; + clrbits_le32(phy_reg + USBPHY_CTRL, USBPHY_CTRL_CLKGATE); +} + +static void usb_power_config(int index) +{ + struct anadig_reg __iomem *anadig = + (struct anadig_reg __iomem *)ANADIG_BASE_ADDR; + void __iomem *pll_ctrl; + + switch (index) { + case 0: + pll_ctrl = &anadig->pll3_ctrl; + clrbits_le32(pll_ctrl, ANADIG_PLL3_CTRL_BYPASS); + setbits_le32(pll_ctrl, ANADIG_PLL3_CTRL_ENABLE + | ANADIG_PLL3_CTRL_POWERDOWN + | ANADIG_PLL_CTRL_EN_USB_CLKS); + break; + case 1: + pll_ctrl = &anadig->pll7_ctrl; + clrbits_le32(pll_ctrl, ANADIG_PLL7_CTRL_BYPASS); + setbits_le32(pll_ctrl, ANADIG_PLL7_CTRL_ENABLE + | ANADIG_PLL7_CTRL_POWERDOWN + | ANADIG_PLL_CTRL_EN_USB_CLKS); + break; + default: + return; + } +} + +static void usb_phy_enable(int index, struct usb_ehci *ehci) +{ + void __iomem *phy_reg; + void __iomem *phy_ctrl; + void __iomem *usb_cmd; + + phy_reg = (void __iomem *)phy_bases[index]; + phy_ctrl = (void __iomem *)(phy_reg + USBPHY_CTRL); + usb_cmd = (void __iomem *)&ehci->usbcmd; + + /* Stop then Reset */ + clrbits_le32(usb_cmd, UCMD_RUN_STOP); + while (readl(usb_cmd) & UCMD_RUN_STOP) + ; + + setbits_le32(usb_cmd, UCMD_RESET); + while (readl(usb_cmd) & UCMD_RESET) + ; + + /* Reset USBPHY module */ + setbits_le32(phy_ctrl, USBPHY_CTRL_SFTRST); + udelay(10); + + /* Remove CLKGATE and SFTRST */ + clrbits_le32(phy_ctrl, USBPHY_CTRL_CLKGATE | USBPHY_CTRL_SFTRST); + udelay(10); + + /* Power up the PHY */ + writel(0, phy_reg + USBPHY_PWD); + + /* Enable FS/LS device */ + setbits_le32(phy_ctrl, USBPHY_CTRL_ENUTMILEVEL2 | + USBPHY_CTRL_ENUTMILEVEL3); +} + +static void usb_oc_config(int index) +{ + void __iomem *ctrl; + + ctrl = (void __iomem *)(nc_reg_bases[index] + USB_NC_REG_OFFSET); + + setbits_le32(ctrl, UCTRL_OVER_CUR_POL); + setbits_le32(ctrl, UCTRL_OVER_CUR_DIS); +} + +int ehci_hcd_init(int index, enum usb_init_type init, + struct ehci_hccr **hccr, struct ehci_hcor **hcor) +{ + struct usb_ehci *ehci; + + if (index >= ARRAY_SIZE(nc_reg_bases)) + return -EINVAL; + + if (init == USB_INIT_DEVICE && index == 1) + return -ENODEV; + if (init == USB_INIT_HOST && index == 0) + return -ENODEV; + + ehci = (struct usb_ehci *)nc_reg_bases[index]; + + usb_power_config(index); + usb_oc_config(index); + usb_internal_phy_clock_gate(index); + usb_phy_enable(index, ehci); + + *hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength); + *hcor = (struct ehci_hcor *)((uint32_t)*hccr + + HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase))); + + if (init == USB_INIT_DEVICE) { + setbits_le32(&ehci->usbmode, CM_DEVICE); + writel((PORT_PTS_UTMI | PORT_PTS_PTW), &ehci->portsc); + setbits_le32(&ehci->portsc, USB_EN); + } else if (init == USB_INIT_HOST) { + setbits_le32(&ehci->usbmode, CM_HOST); + writel((PORT_PTS_UTMI | PORT_PTS_PTW), &ehci->portsc); + setbits_le32(&ehci->portsc, USB_EN); + } + + return 0; +} + +int ehci_hcd_stop(int index) +{ + return 0; +} -- cgit v1.2.3