From d684ca3779cb69dfbd40fc9c7287b52e6216d616 Mon Sep 17 00:00:00 2001
From: Jason Jin <Jason.jin@freescale.com>
Date: Wed, 19 Dec 2012 16:30:36 +0800
Subject: Update the reset cause code for Vybrid

Fixed some bugs for the reset cause code.

Signed-off-by: Jason Jin <Jason.jin@freescale.com>
---
 arch/arm/cpu/armv7/vybrid-common/cpu.c | 80 ++++++++++++++++++----------------
 1 file changed, 42 insertions(+), 38 deletions(-)

diff --git a/arch/arm/cpu/armv7/vybrid-common/cpu.c b/arch/arm/cpu/armv7/vybrid-common/cpu.c
index 865c01fc58..ce223f5dd1 100644
--- a/arch/arm/cpu/armv7/vybrid-common/cpu.c
+++ b/arch/arm/cpu/armv7/vybrid-common/cpu.c
@@ -37,38 +37,38 @@
 
 static char *get_reset_cause(void)
 {
-	char resetcause[32][64] = {"POR",
-				   "Cortex A5 WDOG Timer Reset",
-				   0,
-				   "CA5 WDOG reset",
-				   "CM4 WDOG reset",
-				   "JTAG HIGH-Z",
-				   0,
-				   "External Reset",
-				   "1.2V supply below 0.7V",
-				   "HP regulator's LVD",
-				   "ULP regulator's LVD",
-				   "3.3V main supply is unstable",
-				   "LP regulator's LVD",
-				   0,
-				   0,
-				   0,
-				   "MDM-AP system reset request is set",
-				   "Hard Fail State of System Security Monitor",
-				   "SRC_SCR SW Reset is set",
-				   "Platform's CSU alarm event",
-				   0,
-				   0,
-				   0,
-				   0,
-				   "Anadig regulator 1.1V unstable",
-				   "Anadig regulator 2.5V unstable",
-				   "Anadig regulator 3.0V unstable",
-				   "CMU even when FOSC freq less than 40MHz",
-				   "CMU event when BUS freq is out of range",
-				   "No clock is detected on FOSC",
-				   "No clock is detected on SOSC",
-				   "CM4 is in lockup"};
+	char resetcause[32][64] = {{"POR"},
+				   {"Cortex A5 WDOG Timer Reset"},
+				   {0},
+				   {"CA5 WDOG reset"},
+				   {"CM4 WDOG reset"},
+				   {"JTAG HIGH-Z"},
+				   {0},
+				   {"External Reset"},
+				   {"1.2V supply below 0.7V"},
+				   {"HP regulator's LVD"},
+				   {"ULP regulator's LVD"},
+				   {"3.3V main supply is unstable"},
+				   {"LP regulator's LVD"},
+				   {0},
+				   {0},
+				   {0},
+				   {"MDM-AP system reset request is set"},
+				   {"Hard Fail State of System Security Monitor"},
+				   {"SRC_SCR SW Reset is set"},
+				   {"Platform's CSU alarm event"},
+				   {0},
+				   {0},
+				   {0},
+				   {0},
+				   {"Anadig regulator 1.1V unstable"},
+				   {"Anadig regulator 2.5V unstable"},
+				   {"Anadig regulator 3.0V unstable"},
+				   {"CMU even when FOSC freq less than 40MHz"},
+				   {"CMU event when BUS freq is out of range"},
+				   {"No clock is detected on FOSC"},
+				   {"No clock is detected on SOSC"},
+				   {"CM4 is in lockup"}};
 	char buf[512] = {0}, *pbuf;
 	u32 cause;
 	int i, bit;
@@ -83,7 +83,10 @@ static char *get_reset_cause(void)
 		bit = 1 << i;
 		if ((cause & bit) == bit) {
 			if (resetcause[i][0] != NULL)
-				pbuf += sprintf(pbuf, "%s, ", resetcause[i]);
+			{
+				sprintf(pbuf, "%s, ", resetcause[i]);
+				break;
+			}
 		}
 	}
 
@@ -97,15 +100,16 @@ static char *get_reset_cause(void)
 int print_cpuinfo(void)
 {
 	u32 cpurev;
+	char *tmp;
 
 	cpurev = get_cpu_rev();
-	printf("CPU:   Freescale VyBrid %x family rev%d.%d at %d MHz\n",
+	printf("CPU:   Freescale VyBrid %x family rev%d.%d at 396 MHz\n",
 		(cpurev & 0xFFF000) >> 12,
 		(cpurev & 0x000F0) >> 4,
-		(cpurev & 0x0000F) >> 0,
-		vybrid_get_clock(VYBRID_ARM_CLK) / 1000000);
-	if (get_reset_cause() != NULL)
-		printf("Reset cause: %s\n", get_reset_cause());
+		(cpurev & 0x0000F) >> 0);
+	tmp = get_reset_cause();
+	if (tmp != NULL)
+		printf("Reset cause: %s\n", tmp);
 	return 0;
 }
 #endif
-- 
cgit v1.2.3