From 72a8cf8dccf6f8b86d1683205e032a94eaa86938 Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Sun, 17 Jan 2016 20:53:51 -0700 Subject: Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass Reviewed-by: Bin Meng Reviewed-by: Heiko Schocher Acked-by: Stefan Roese Acked-by: Przemyslaw Marczak --- cmd/cmd_mmc_spi.c | 88 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 88 insertions(+) create mode 100644 cmd/cmd_mmc_spi.c (limited to 'cmd/cmd_mmc_spi.c') diff --git a/cmd/cmd_mmc_spi.c b/cmd/cmd_mmc_spi.c new file mode 100644 index 00000000000..a2138b8650e --- /dev/null +++ b/cmd/cmd_mmc_spi.c @@ -0,0 +1,88 @@ +/* + * Command for mmc_spi setup. + * + * Copyright (C) 2010 Thomas Chou + * Licensed under the GPL-2 or later. + */ + +#include +#include +#include + +#ifndef CONFIG_MMC_SPI_BUS +# define CONFIG_MMC_SPI_BUS 0 +#endif +#ifndef CONFIG_MMC_SPI_CS +# define CONFIG_MMC_SPI_CS 1 +#endif +/* in SPI mode, MMC speed limit is 20MHz, while SD speed limit is 25MHz */ +#ifndef CONFIG_MMC_SPI_SPEED +# define CONFIG_MMC_SPI_SPEED 25000000 +#endif +/* MMC and SD specs only seem to care that sampling is on the + * rising edge ... meaning SPI modes 0 or 3. So either SPI mode + * should be legit. We'll use mode 0 since the steady state is 0, + * which is appropriate for hotplugging, unless the platform data + * specify mode 3 (if hardware is not compatible to mode 0). + */ +#ifndef CONFIG_MMC_SPI_MODE +# define CONFIG_MMC_SPI_MODE SPI_MODE_0 +#endif + +static int do_mmc_spi(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + uint bus = CONFIG_MMC_SPI_BUS; + uint cs = CONFIG_MMC_SPI_CS; + uint speed = CONFIG_MMC_SPI_SPEED; + uint mode = CONFIG_MMC_SPI_MODE; + char *endp; + struct mmc *mmc; + + if (argc < 2) + goto usage; + + cs = simple_strtoul(argv[1], &endp, 0); + if (*argv[1] == 0 || (*endp != 0 && *endp != ':')) + goto usage; + if (*endp == ':') { + if (endp[1] == 0) + goto usage; + bus = cs; + cs = simple_strtoul(endp + 1, &endp, 0); + if (*endp != 0) + goto usage; + } + if (argc >= 3) { + speed = simple_strtoul(argv[2], &endp, 0); + if (*argv[2] == 0 || *endp != 0) + goto usage; + } + if (argc >= 4) { + mode = simple_strtoul(argv[3], &endp, 16); + if (*argv[3] == 0 || *endp != 0) + goto usage; + } + if (!spi_cs_is_valid(bus, cs)) { + printf("Invalid SPI bus %u cs %u\n", bus, cs); + return 1; + } + + mmc = mmc_spi_init(bus, cs, speed, mode); + if (!mmc) { + printf("Failed to create MMC Device\n"); + return 1; + } + printf("%s: %d at %u:%u hz %u mode %u\n", mmc->cfg->name, mmc->block_dev.dev, + bus, cs, speed, mode); + mmc_init(mmc); + return 0; + +usage: + return CMD_RET_USAGE; +} + +U_BOOT_CMD( + mmc_spi, 4, 0, do_mmc_spi, + "mmc_spi setup", + "[bus:]cs [hz] [mode] - setup mmc_spi device" +); -- cgit v1.2.3