// SPDX-License-Identifier: GPL-2.0+
/*
 * Copyright 2022 NXP
 */

/ {
	/delete-node/ dsi-host;
	/delete-node/ ir-receiver;
	/delete-node/ rm67199_panel;

	gpio-leds {
		panel {
			label = "green:panel";
			gpios = <&pca6408_2 0 GPIO_ACTIVE_LOW>;
			default-state = "on";
		};
	};

	reg_ab2_ana_pwr: regulator-ab2-ana-pwr {
		compatible = "regulator-fixed";
		regulator-name = "ANA_12V0";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_ab2_ana_pwr>;
		regulator-min-microvolt = <12000000>;
		regulator-max-microvolt = <12000000>;
		gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
		enable-active-high;
	};

	reg_ab2_vdd_pwr_5v0: regulator-ab2-vdd-pwr-5v0 {
		compatible = "regulator-fixed";
		regulator-name = "VDD_5V0";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
		regulator-always-on;
		regulator-boot-on;
		enable-active-high;
	};
};

&fec1 {
	phy-reset-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;

	mdio {
		ethphy0: ethernet-phy@0 {
			max-speed = <100>;
		};
	};
};

&i2c2 {
	/delete-node/ adv7535@3d;
	/delete-node/ tcpc@50;

	pca6408_2: gpio@20 {
		compatible = "ti,tca6408";
		reg = <0x20>;
		gpio-controller;
		#gpio-cells = <2>;
	};

	ptn5150: tcpc@1d {
		compatible = "nxp,ptn5150";
		reg = <0x1d>;
		status = "okay";

		port {
			typec1_dr_sw: endpoint {
				remote-endpoint = <&usb1_drd_sw>;
			};
		};

		typec1_con: connector {
			compatible = "usb-c-connector";
			label = "USB-C";
			power-role = "dual";
			data-role = "dual";
			try-power-role = "sink";
			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
				PDO_VAR(5000, 20000, 3000)>;
			op-sink-microwatt = <15000000>;
			self-powered;
		};
	};
};

&iomuxc {
	pinctrl_fec1: fec1grp {
		fsl,pins = <
			MX8MN_IOMUXC_ENET_MDC_ENET1_MDC		0x3
			MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO	0x3
			MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3	0x1f
			MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2	0x1f
			MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1	0x1f
			MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0	0x1f
			MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3	0x91
			MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2	0x91
			MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1	0x91
			MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0	0x91
			MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC	0x1f
			MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC	0x91
			MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
			MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
			MX8MN_IOMUXC_GPIO1_IO05_GPIO1_IO5	0x16
		>;
	};

	pinctrl_ab2_ana_pwr: ab2anapwrgrp {
		fsl,pins = <
			MX8MN_IOMUXC_GPIO1_IO10_GPIO1_IO10	0x41
		>;
	};

	pinctrl_ab2_vdd_pwr_5v0: ab2vddpwr5v0grp {
		fsl,pins = <
			MX8MN_IOMUXC_GPIO1_IO07_GPIO1_IO7	0x41
		>;
	};

	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
		fsl,pins = <
			MX8MN_IOMUXC_SD2_CD_B_GPIO2_IO12	0x1c4
		>;
	};
};

&lcdif {
	status = "disabled";
};

&mipi_dsi {
	status = "disabled";

	/delete-node/ port@1;
	/delete-node/ port@2;
};

&usdhc2 {
	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
};

&usbotg1 {
	extcon = <&ptn5150>;
};